Grade 5 Titanium Plate

2B/ BA/ HL/ NO.1 finish ASTM B265 UNS N56400 Plate manufacturers in India.


Titanium is a solid chemical element and is known for its low density, high strength-to-weight ratio. Titanium is alloyed with different elements to form different grades. Grade 5 Titanium Plate is one such product. It is stronger than grades 1-4 and has a density of 4420 kg/m3 and tensile strength of 1000 MPa. It takes higher loads and provides good fatigue resistance. Cp Grade 5 Titanium Sheet has a hardness of 379 HB and Rockwell hardness of 41. It is to be used in applications up to 400 degrees celsius. Thus it is suitable for the paper and pulp industry and chemical processing industries.

 ASME SB265 Titanium Gr 5 Cold Rolled Sheet has a modulus of elasticity of 114 GPa equivalent to 16500 ksi and compressive yield strength of 1070 MPa. Since the fatigue strength is as high as 700 MPa, it is used in power generation. The Werkstoff equivalent ASTM B265 DIN 3.7165 Perforated Sheet has a high modulus of elasticity as titanium is ductile. The Charpy impact is around 23 Joules and the shear strength is at 760 MPa. It has a low thermal conductivity at 6.7 W/m-K causing heat during machining.

The Uns N56400 strip has a maximum compressive strength of 1080 MPa and an elastic limit between 786 to 910 MPa. Further, Poisson’s ratio is between 0.31 and 0.37. This standard is used for its high bearing yield strength of 1790 MPa. The ti-6al-4v foil is heat treatable in section sizes upto 15 mm but it should not exceed the temperature of 400 Celsius for a longer period. It uses 6% aluminum and 4 % vanadium, thus making it stiff as well as fabricable.

The grade 5 titanium Shim Sheet is used in pressure valves and reactor vessels as they are used to provide a level surface.


uns n56400 strip

UNS N56400 strip

Grade 5 Titanium Hot Rolled Plate

Ti Alloy Gr 5 Foil

Grade 5 Titanium Plate
Grade 5 Titanium Plate
Titanium Grade 5 Sheet
Titanium Grade 5 Sheet

The grade 5 titanium Hot Rolled Plate has an ultimate tensile strength of 1170 MPa and yield strength of 1100 MPa and electrical resistivity of 0.000178 ohm-cm. The grade 5 have a high melting point of 1604 to 1660 degree celsius and beta transus of 980 Celsus. Titanium Gr Chequered Plate is forged at a temperature of 982 Celsius and complete at 968 Celsius. Similar to this, aging treatment is done between temperatures of 904 to 954 Celsius for a minimum of 2 hours and then rapidly cooled at room temperature. Titanium Alloy Gr 5 coil has fair weldability and solution annealing for making it tougher is done at 732 Celsius for 4 hours. It has a specified bend radius of 4.5.

grade 5 titanium plate supplier in india


Don't spend for extra size of ti-6al-4v Coil, we supply custom sizes Cp Grade 5 Titanium foil in Mumbai.


Gr 5 Titanium Coil Equivalent

STANDARD UNS WERKSTOFF NR.
Grade 5 Titanium Plate And Sheet N56400 3.7165

Ti Gr 5 Foil Chemical Composition

Grade Ti C Fe H N O Al V
Grade 5 Titanium Plate And Sheet 90 minimum - 0.25 maximum - - 0.2 max 6 minimum 4 minimum

Spec Chart Of Titanium Grade 5 Plate And Sheet

Specification Grade 5 Titanium Plate
Standard Dimensions Of EN ISO 18286/ ASME IID/ ASTM A 959/ ASTM A 480
UNS Number Of Copper Nickel 70/30 Plate UNS N56400
Chemical Composition UNS N56400 Sheet : Copper (69.5%)/ Nickel (30.0%)/ Iron (0.5%)
Mechanical Properties Of Tensile 40000 psi
Thickness 0.063 to 0.375 Inches
Plate Length Up to 240 Inches
Form Blank (Circle)/ Ring (Flange)/ Plain Sheet/ Strip/ Flats/ Coils/ Foils/ Rolls
Offer a huge selection of high quality Titanium Grade 5 Sheet Beijing, Pune, Riyadh, Baku, Sharjah, Bhubaneswar, Sao-Paulo, Puchong, Raipur, Nagpur, Jamnagar, Jamshedpur, Perth, Chicago, Lucknow, Nashik, Dubai, Singapore, Kalyan, Secunderabad, Oyama, Ho-Chi-Minh-City, Guwahati, Shah-Alam, Dombivli, Vasai-Virar, Kochi, Visakhapatnam, Bangkok, Jeddah, Surat, Rajkot, Dammam, Mumbai, Pimpri-Chinchwad, Ajman, Santiago, Hangzhou, Thane, Mexico-City, London, Quezon-City, Calgary, Brisbane, Jaipur, Vung-Tau, Jakarta, Al-Khobar, Mysuru, Bengaluru, New-Delhi, Manama, Shanghai, Kuala-Lumpur, Gurgaon, Busan, Vapi, Noida, Hyderabad, Lagos, Faridabad, Batam, Coimbatore, Indore, Zhengzhou, Agra, Amsterdam, Delhi, Madrid, Ludhiana, Ambernath, Vadodara, Al-Jubail, Chennai, Dallas, Panipat, Houston, Ghaziabad, Bogota, Navi-Mumbai, Cairo, Tehran, Bhopal, Sydney, Patna, Abu-Dhabi, Ashburn, Karachi, Ankleshwar, Hazira, Johor-Bahru, Surabaya, Dhaka, Kota, Chandigarh, Paris, Ahmedabad, Milan, Doha, Kolkata, Seoul, Melbourne, Hanoi, Istanbul, Alexandria, Tiruchirappalli,
Plate Width 36 to 60 Inches
Most Selling Type Of Rolling Sheet/ Rolling Plate/ Flat Shim/ Flat Sheet/ Shim Sheet/ descaled/ tread plate/ Checker Plate, Plate/ Sheet/ Coils/ Foils/ Strip/ Flats/ Clad Plate/ Plain Sheet/ Rolls/ Blank (Circle)/ sheared/ annealed/ soft annealed

Check standard specification & price list of ASTM B265 DIN 3.7165 Perforated Sheet Ex Mumbai.


Grade 5 Titanium Sheet Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Grade 5 Titanium Plate And Sheet 4.43 g/cm3 1632 °C (2970 °F) Psi - 138000 , MPa - 950 Psi - 128000 , MPa - 880 14 %

Keep ASME SB265 Titanium Gr 5 Cold Rolled Shim Sheet and Hot Rolled Plate stock at factory price.

UNS N56400 Plate Standard Dimensions

Dimensions Of Metric

finish Surface

Thickness (millimeter)

Width (millimeter)

2B – Cold rolled, heat treated, pickled, skin passed

0.25–8.0

maximum 2032

2D – Cold rolled, heat treated, pickled

0.4–6.35

maximum 1524

2E – Cold rolled, heat treated, mechanically descaled

0.4–8.0

maximum 2032

2R – Cold rolled, bright annealed

0.25–3.5

maximum 1524

2H – Work hardened

0.4–6.35

maximum 1524

Polished, brushed

0.5–4.0

maximum 1524


Werkstoff Nr. 3.7165 Plate And Sheet Sizes Chart

STOCKED SIZES
Size Range Grade 5 Titanium Plate And Sheet Size Of Plate & Sheet
.125" Perforated Plate And Sheet 3.18mm
.134" Coil And Strips 3.40mm
156" Perforated Plate And Sheet 3.96mm
187" Sheet & Rolling Plate 4.75mm
250" Rolling Sheets 6.35mm
312" Perforated Plate And Sheet 7.92mm
375" Rolling Plate And Sheet 9.53mm
.500" Sheet And Clad Plate 12.7mm
.625" Flat Shim And Sheet 15.9mm
.750" Sheet And Strips 19.1mm
.875" Rolling Sheets 22.2mm
1" Plate/ Flat Shim/ Sheet 25.4mm
2" Plate And Clad Plate & Sheet 50.8mm
3" Plate And Rolling Sheets 76.2mm

buy Custom Cut Lengths of Titanium Gr 5 Chequered Plate conforms to Material Test certificate.

Ti6al4v Hot Rolled Plate Schedule Chart

Thickness In Inches Plate Weight (Unit Area) Density
3/16" 0.06000 lbs/in²42.184176 kilogram/m² 0.315 lbs/in³8.72 g/cm³
1/4" 0.08 lbs/in²56.245568 kilogram/m² 0.315 lbs/in³8.72 g/cm³
3/8" 0.121 lbs/in²85.0714216 kilogram/m² 0.315 lbs/in³8.72 g/cm³
1/2" 0.161 lbs/in²113.1942056 kilogram/m² 0.315 lbs/in³8.72 g/cm³
5/8" 0.196 lbs/in²137.8016416 kilogram/m² 0.315 lbs/in³8.72 g/cm³
3/4" 0.235 lbs/in²165.221356 kilogram/m² 0.315 lbs/in³8.72 g/cm³
7/8" 0.274 lbs/in²192.6410704 kilogram/m² 0.315 lbs/in³8.72 g/cm³
1" 0.313 lbs/in²220.0607848 kilogram/m² 0.315 lbs/in³8.72 g/cm³

Most Selling Types of ASTM b265 Ti Alloy Gr 5 Sheet

ASTM B265 Titanium Grade 5 Strip Tape

ASTM B265 Titanium Grade 5 Strip Tape

Titanium Grade 5 Perforated Sheet

Titanium Grade 5 Perforated Sheet

Grade 5 titanium Din 3.7165 Cold Rolled Sheet

Grade 5 titanium Din 3.7165 Cold Rolled Sheet

3.7165 grade 5 titanium Hot Rolled Plate

3.7165 grade 5 titanium Hot Rolled Plate

Grade 5 titanium Superalloy Mesh Plate

Grade 5 titanium Superalloy Mesh Plate

Titanium Gr 5 Checker Plate

Titanium Gr 5 Checker Plate

Titanium Gr 5 Cold Rolled Plate

Titanium Gr 5 Cold Rolled Plate

Grade 5 Titanium Coil

Grade 5 Titanium Coil


Recently Supplied To Following Locations

Grade 5 Titanium Plate Europe, Malaysia, Romania, Japan
Titanium Grade 5 Sheet Finland, Malaysia, USA, Bangladesh
Ti6al4v Sheet & Plate Italy, Iran, Chile, Singapore
Ti Alloy Gr 5 Foil Egypt, Spain, UK, Mexico
Ti-6AL-4V ELI Titanium Sheet Ellington -United States, UK, Poland, Canada
AMS 4911 Ti Grade 5 Plate United Kingdom -UK, Malaysia, Europe, UAE
Ti 6al-4v Gr 5 Plate / Strip / Coil / Foil Turkey, United Arab Emirates (UAE), Norway, Malaysia
Grade Titanium 5 Sheets And Plate Philippines, Dammam -KSA, Belgium, Indonesia.
ASTM B265 UNS N56400 Plate Canada, Singapore, Malaysia, Philippines
Titanium Gr 5 Cold Rolled Sheet Colombia, Malaysia, Sweden, China
ASTM B265 DIN 3.7165 Perforated Sheet Netherlands, Malaysia, Russia, Dubai
Uns N56400 strip Or Plate South Africa, Saudi Arabia (KSA), Kuwait, Brazil
grade 5 titanium Hot Rolled Plate Nigeria, UK, Australia, Philippines
Titanium Gr 5 Chequered Plate Malaysia, UAE, Hong Kong, Oman
Titanium Alloy Gr 5 coil & Plate South Africa, Bahrain, Singapore