Fasteners made from titanium are used in military applications and the underwater and shipbuilding industry. They can bear high strength and weight ratio with great resistance to corrosion cracking due to stress and excellent fatigue strength is obtained. Titanium Grade 5 Fasteners are widely used and are also called Ti-6AI-4V or just Ti6-4. This name indicates the chemical proportion of the alloy containing mostly Titanium then followed by a small proportion of Aluminium and Vanadium. These are strong and durable with high tensile strength. Pairing to these fasteners, commercially declared pure alloy of titanium ASTM B348 UNS R56400 Bolts is highly resistible to seawater.
Also, these bolts are irresistible to corrosion due to atmospheric pressure in seawater. They are stud enough to be used in shipbuilding and other marine appliances. Titanium grade 5 bolts are also referred to as Ti-6Al-4V bolts due to their chemical proportion present in them they are contained mainly by titanium of both alpha and beta grade of titanium. They are widely used in seawater. Titanium Gr5 hex bolts are the most common and widely used bolts in the military and marine field for building ships and other applications related to the marine industry, they are powerful alloy to withstand vast pressure of the ocean and highly resistive to seawater.
ASME SB348 CP GR5 Titanium bolts and nuts are another set of nuts and bolts which are used in the marine industry but close to the water, they are annealed perfectly or by required, pickled by choice, polished to avoid corrosion, annealed brightly to have a shine and Cold drawn to avoid slipping due to temperature. TI Alloyed grade 5 Treaded rod is made by using Titanium and aluminium and little amount of vanadium. This alloy threads are too strong and can handle strong wind and water pressure easily.
Table of Content
Standard | ASTM B348 / ASME SB348 |
---|---|
Size | M 02 to M 33 |
Length | 3 mm to 200 mm |
Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: | DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
SCOPE OF MANUFACTURE |
|
Dia | M6 to M64 (1/4" - 2.5") |
Length | 12 MM - 500 MM (Upto 20 Inch) |
IS | 1363, 1364 |
DIN | 931, 933 |
ISO | ISO 3506 |
Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
Finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
Production process | M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element |
Origin and service-region: | European, Origin of Western European. However projects with eastern origin are possible on request. |
Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fasteners Etc. |
Types | Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts |
Ti Grade 5 Heavy Hex Bolts
Gr 5 Ti Lag Bolts
Ti UNS R56400 Carriage Bolts
ASME SB348 Ti Grade 5 U Bolts
Gr 5 Ti Double Ended Studs
Ti UNS R56400 T Nuts
Gr 5 Ti Hex Head Nuts
Titanium UNS R56400 Washers
M6 Titanium Grade 5 Socket Hex Bolts Cap Screws 10 15 20 25 30 35 40 45 50 55 60 65mm | 1 | $1.01 |
M6*1mm Grade 5 Ti Socket Flange Bolt Cap Screw 60 65 | 1 | $1.35 |
Titanium Gr 5 | C | Ti | N | Fe | H | O | V | Al |
0.10 max | 90 min | 0.05 max | 0.40 max | 0.015 max | 0.20 max | 3.5-4.5 | 5.5-6.75 max |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 128000 , MPa – 880 | Psi – 138000 , MPa – 950 | 14 % |
ANDARD | UNS | WERKSTOFF NR. |
Titanium Gr 5 | R56400 | 3.7165 |
Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
Width, Across Flats | Width, Across Corners | Thickness | |||||||
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS | ACROSS THE FLATS | ACROSS BOLTS CORNERS | ||||
---|---|---|---|---|---|---|---|---|
D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Bolt Size | USS | SAE | ||||
OD (in.) | ID (in.) | Thickness | OD (in.) | ID (in.) | Thickness | |
1/8 (#6) | - | - | - | 0.375 | 0.156 | .036/.065 |
5/32 (#8) | - | - | - | 0.438 | 0.188 | .036/.065 |
3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
7/32 (#12) | - | - | - | 0.562 | 0.250 | .051/.080 |
1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
1 5/8 | 3.750 | 1.750 | .153/.213 | - | - | - |
1 3/4 | 4.000 | 1.875 | .153/.213 | - | - | - |
1 7/8 | 4.250 | 2.000 | .153/.213 | - | - | - |
2 | 4.500 | 2.125 | .153/.213 | - | - | - |
2 1/4 | 4.750 | 2.375 | .320/.248 | - | - | - |
2 1/2 | 5.000 | 2.625 | .210/.280 | - | - | - |
2 3/4 | 5.250 | 2.875 | .228/.410S | - | - | - |
3 | 5.500 | 3.125 | .249/.327 | - | - | - |
Nominal | Thread. | Hex Socket Size | Body diameter and Head height | Head Dia | Soc. length | ||
Size | Pitch | Max | Min | Max | Min | ||
J | D /H | A | K | ||||
M3 | 0.5 | 2.50 | 3.00 | 2.86 | 5.50 | 5.20 | 1.3 |
M4 | 0.70 | 3.00 | 4.00 | 3.82 | 7.00 | 6.64 | 2.00 |
M5 | 0.8 | 4.00 | 5.00 | 4.82 | 8.50 | 8.14 | 2.70 |
M6 | 1.0 | 5.00 | 6.00 | 5.82 | 10.00 | 9.64 | 3.30 |
M8 | 1.25 | 6.00 | 8.00 | 7.78 | 13.00 | 12.57 | 4.3 |
M10 | 1.5 | 8.00 | 10.00 | 9.78 | 16.00 | 15.57 | 5.50 |
M12 | 1.75 | 10.00 | 12.00 | 11.73 | 18.00 | 17.57 | 6.60 |
M16 | 2.0 | 14.00 | 16.00 | 15.73 | 24.00 | 23.48 | 8.80 |
M20 | 2.5 | 17.00 | 20.00 | 19.67 | 30.00 | 29.48 | 10.70 |
M24 | 3.0 | 19.00 | 24.00 | 23.67 | 36.00 | 35.38 | 12.90 |
Nut Size, (mm) | Diameter*, (mm) | Height, (mm) | ||
---|---|---|---|---|
Hex Nut | Jam Nut | Nylock Nut | ||
2 | 4 | 1.6 | 1.2 | - |
2.5 | 5 | 2 | 1.6 | - |
3 | 5.5 | 2.4 | 1.8 | 4 |
4 | 7 | 3.2 | 2.2 | 5 |
5 | 8 | 4 | 2.7 | 5 |
6 | 10 | 5 | 3.2 | 6 |
7 | 11 | 5.5 | 3.5 | - |
8 | 13 | 6.5 | 4 | 8 |
10 | 17 | 8 | 5 | 10 |
12 | 19 | 10 | 6 | 12 |
14 | 22 | 11 | 7 | 14 |
16 | 24 | 13 | 8 | 16 |
18 | 27 | 15 | 9 | 18.5 |
20 | 30 | 16 | 10 | 20 |
* This is the diameter across the flats. It is also the size of wrench to use. |
Size | USS | SAE | ||||
---|---|---|---|---|---|---|
Inside Diameter, (A) | Outside Diameter, (B) | Thickness, (C) | Inside Diameter, (A) | Outside Diameter, (B) | Thickness, (C) | |
#2 | - | - | - | 3/32" | 1/4" | 0.020" |
#4 | - | - | - | 1/8" | 5/16" | 0.032" |
#6 | - | - | - | 5/32" | 3/8" | 0.049" |
#8 | - | - | - | 3/16" | 7/16" | 0.049" |