Titanium Flanges Manufacturer In India

ASTM B381 Titanium Grade F2 Blind And Gr F5 Slip On Flange Supplier In Mumbai, India.

Titanium Flanges

 

Some of Titanium’s most useful properties are its high tensile strength, low density, stiffness. It is nontoxic & non-magnetic. The tensile strength of the alloy ASTM B381 Grade F2 Flanges vary from 210-1380 Mpa, although titanium loses its strength when heated beyond 430 °C. It has good heat transfer properties, a poor conductor of electricity and highly resistant to electricity. Titanium has a high melting point of 1668 °C or 3034 °F. Titanium is also very ductile.

Since titanium is light weight it proves to be beneficial for high-performance applications like aerospace construction as they allow weight savings. Titanium Flange can be strengthened by addition of metals to their alloys. Alloying titanium ensures its good resistance to corrosion from very low to elevated temperatures. For example, titanium when alloyed with other metals like aluminium, vanadium, iron and molybdenum produces strong and lightweight alloys. These alloy grades can be used for military, automotive, aerospace (jet engines, missiles, and spacecraft), agri-food, medical purposes, industrial processes (chemicals and petrochemicals, desalination plants, pulp, and paper)

An important part of using it is the production of Titanium Exhaust Flange . The most common metal used to alloy titanium is steel. Addition of steel makes the alloy strong and more resistant to corrosion. It prevents rusting. Another advantage in od producing Titanium steel alloys is its low density. The alloy has a density that is less than half that of a pure steel alloy.

Titanium can be passivated by water and atmosphere. During passivation, it forms a shell of Titanium dioxide around the metal. This metal oxide protects the bulk metal from being oxidized further. Therefore, it has excellent resistance to seawater. When titanium is passivated with air, it becomes highly resistant to corrosion. While it can have a high resistance to mineral acids, organic acids, dilute hydrochloric acid, sulphuric acid and chloride solution, Titanium gets corroded by acids in concentrated form.

Click here to know more about Titanium Blind Flange. We are one of the best Titanium Flanges Manufacturer In India.

 

Titanium Flanges
Titanium Flanges
Titanium Blind Flanges
Titanium Blind Flanges
Titanium Weld Neck Flanges
Titanium Weld Neck Flanges

 


titanium flange 

NABL Approved Class 150 ASME SB381 Ti Alloy Gr 5 Weld Neck Flanges According To ASME/ ANSI B16.5 And Uns R50400 Forged & Plate Flanges In All Pressure Class Rating.

 

Titanium Flange Pressure Temperature Rating

Temperature °C150#300#400#600#900#1500#2500#
-29~3815.941.455.282.7124.1206.8344.7
5015.440.253.780.5120.7201.2335.3
10013.835.947.971.9107.8179.7299.5
15012.933.745.067.5101.2168.7281.1
20012.532.743.665.498.1163.5272.4
25012.132.643.565.297.8163.0271.7
30010.232.643.565.297.8163.0271.7
3259.332.643.565.297.8163.0271.7
3508.432.643.465.197.7162.8271.3
3757.432.443.264.897.2161.9269.9
4006.532.142.864.296.2160.4267.4
4255.531.642.263.394.9158.2263.6
4504.626.935.953.880.7134.5224.2
4753.720.827.741.562.3103.8173.0

 

Get Online ASME SB381 Uns R56400 Long Weld Neck And Socket Weld Flange Standards And Titanium Threaded Pipe Flanges Types With Size Wise Price.

 

Price List Of Titanium Pipe Flanges In Mumbai, India

SizeClassSchedulePrice In INR (Per Piece)
Titanium Slip On Flange
1"Class 150Schedule 40368.00
2"Class 150Schedule 40500.00
3"Class 150Schedule 40699.00
4"Class 300Schedule 80857.00
Titanium Blind Flange
3/4"Class 150Schedule 40299.00
1"Class 150Schedule 40365.00
1-1/2"Class 150Schedule 40500.00
2"Class 150Schedule 40659.00
3"Class 150Schedule 40800.00
Titanium Weld Neck Flange
1"Class 150Schedule 40279.00
2"Class 150Schedule 40400.00
3"Class 150Schedule 40699.00
4"Class 150Schedule 40950.00

Most Reliable Manufacturer Of Titanium Flanges in India. For final Titanium Grade 5 Flanges Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.

 

India's Largest Inventory of Astm B381 Titanium Exhaust and Header Flanges at best Price, see weight chart

 

ASME SB381 Titanium Flange Weight

Normal Pipe SizesDimensions Of FlangesWeight In Kilogram
Normal Pipe Size
(Inch)
DN (Millimeter)Flanges
Millimeter
Flanges
Thickness
Slip-on
Socket Weld (KG)
Weld Neck (KG)Blind (KG)
1/21588.911.20.40.50.4
3/42098.612.70.60.70.6
12510814.20.810.9
1 1/432117.315.711.31.2
1 1/24012717.51.31.71.5
250152.419.12.12.62.4
2 1/265177.822.43.34.13.9
380190.523.93.94.94.9
3 1/290215.923.94.86.16.2
4100228.623.95.36.87.0
512525423.96.18.68.6
6150279.425.47.510.611.3
8200342.928.412.117.619.6
10250406.430.216.52428.6
12300482.631.826.236.543.2
14350533.435.134.648.458.1
16400596.936.644.860.676.1
1845063539.648.968.393.7
20500698.542.961.984.5122.0
24600812.847.886.9115185.0

 

Know Complete Specifications Of Titanium Flanges and Forgings And buy Werkstoff Nr. 3.7165 RTJ Flanges at factory price in India

 

titanium flanges manufacturer

 

Titanium Flanges Specification List

Specifications ASTM B381 / ASME SB381
Titanium Flanges Standard DIN
  • 10Bar, 40Bar 16Bar 6Bar, 25Bar,
  • PN64, PN25, PN40, PN10, PN6, PN16,
Titanium grade 2 Flange Standard EN
  • 40Bar, 10Bar, 6Bar, 25Bar, 16Bar
Uns R56200 Flanges Standards
  • B16.47 Series A & B
  • B16.5
  • ANSI/ ASME
  • EN-1092, BS 10, ANSI Flanges, DIN, BS Flanges, ASME Flanges, EN Flanges, DIN Flanges, GOST Flanges.
  • B16.48, BS4504
alloy grade 2 Flanges Standard JIS
  • 63K 10K, 30K, 20K, 5K, 40K, 16K,
Titanium Flanges Standard UNI
  • 40Bar 10Bar, 6Bar, 25Bar, 16Bar
ASME B16.5 Titanium Flange size range 1/2" (15 NB) - 48" (1200NB) DN10~DN5000
Ti Grade 5 Flanges Standard ANSI
  • Class 300 LBS, 150 LBS, 900 LBS, 600 LBS, 2500 LBS, 1500 LBS
Titanium Pipe Flanges Test Certificates 100% Radiography Test Report
Raw Materials Certificate
EN 10204/3.1B
Third Party Inspection Report
Astm B381 Uns R56200 Flange supporting material Ring Joint, Gasket, Flange Bolts
Manufacturer of Titanium Threaded / Forged / Plate/Screwed Flange
Wnr 3.7035 Flanges Production technique
  • Heat treated.Forged and machined
Asme Sb 381 R56200 Flange Connect Type/ Flange Face Type
  • Titanium grade 2 Ring Type Joint (RTJ), Raised Face (RF), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Large Tongue & Groove, Small Tongue , Groove
Most common types of Titanium Flanges
  • Titanium Socket Weld Ring Flanges (SWRF)
  • Titanium Blind Ring Flanges (BLRF)
  • Titanium Weld Neck Ring Flanges (WNRF)
  • Titanium Ring Type Joint Flanges (RTJF)
  • Titanium Slip-On Ring Flanges (SORF)
  • Titanium Lap Joint Ring Flanges (LJRF)
  • Titanium Threaded Ring Flanges
Equipment for Din 3.7035 Flange Bending machine, Press machine, electric bevelling machine, Pushing Machine, Sand-blasting machine etc
Special manufacturing design of Ti Grade 5 flanges

As per your drawing

ANSI, AS, DIN JIS and BS
15 NB (1/2") - 200 NB (8")
Reducing and Equal Configurations

Alloy grade 2 Flange Test Direct-reading Spectrograph, X-ray detector, UI trasonic flaw detector, Hydrostatic testing machine, Magnetic particle detector
Titanium Flange Origin West Europe / Indian /USA /Japan / Korean
Alloy grade 2 flange Standard
  • GOST Flange
  • API 6A Flange
  • GB Flange
  • UNI Flange
  • DIN Flange
  • PSI Flange
  • AWWA C207 Flange
  • EN1092-1 Flange
  • BS4504 Flange
  • JIS/ KS Flange
  • ASME Flange
  • ANSI Flange
Application & uses of Titanium alloy flanges
  • Titanium grade 2 Flange are mainly used in Oil & Gas, Chemical, Nuclear power (mostly seamless), Power, Bitumen upgraders, Petrochemicals and acids, Heavy oil refineries, Gas, ,Construction, Shipbuilding industries, Metallurgy & others.
Specialized manufacturer of Titanium grade 2 flanges
  • Titanium grade 2 Weld Neck Flanges
  • AS 4087 Water Flanges
  • Asme Sb 381 R56200 Slip-On Flanges
  • Astm B381 Uns R56200 Threaded Flanges
  • alloy grade 2 Socketweld Flanges
  • Astm B381 Uns R56200 DIN 2566 pn10
  • Astm B381 Uns R56200 Large Diameter Flanges
  • alloy grade 2 Sorf Flanges
  • Ti Grade 5 Blind Flanges
  • Uns R56200 Pn16 Flanges
  • Uns R56200 Table Flanges
  • Titanium grade 2 Rtj Flanges
  • Ti Grade 5 Plate Flanges
  • Titanium Loose Flanges
  • ASME B16.36 Alloy grade 2 Orifice Flanges
  • DIN 2566 pn16
  • Titanium grade 2 Lap Joint Flanges
  • DIN 2566 en 1092 1
as per EN 10204 3.2 and EN 10204 3.1 Material Test Certificates (MTC) , certifying NACE MR0175/ NACE MR0103

 

Class 150 Titanium Grade 2 Flanges Dimensions Chart

Class 150 Titanium Grade 2 Flanges Dimensions Chart
Normal Pipe SizeOuter Diameter of FlangesThickness of FlangesDiameter of (RF) Raised FaceDiameter of Hub At BaseLengtd Tdru HubDiameter And BoreDiameter of Hub at BevelFillet RadiusSocket Deptd
Weld Neck (WN) FlangesSlip On And Threaded/ Socket Weld FlangesLap Joint FlangesSlip-on (SORF) And Socket Weld FlangesLap Joint (Loose) Flanges
OQRXYYYWBHrZ
1/23-1/27/161-3/81-3/161-7/85/85/8.88.90.841/83/8
3/43-7/81/21-11/161-1/22-1/165/85/81.091.111.051/87/16
14-1/49/1621-15/162-3/1611/1611/161.361.381.321/81/2
1-1/44-5/85/82-1/22-5/162-1/413/1613/161.701.721.663/169/16
1-1/2511/162-7/82-9/162-7/167/87/81.951.971.901/45/8
263/43-5/83-1/162-1/2112.442.462.385/1611/16
2-1/277/84-1/83-9/162-3/41-1/81-1/82.942.972.885/163/4
37-1/215/1654-1/42-3/41-3/161-3/163.573.603.503/813/16
3-1/28-1/215/165-1/24-13/162-13/161-1/41-1/44.074.104.003/87/8
4915/166-3/165-5/1631-5/161-5/164.574.604.507/1615/16
51015/167.5/166-7/163-1/21-7/161-7/165.665.695.567/1615/16
61118-1/27-9/163-1/21-9/161-9/166.726.756.631/21-1/16
813-1/21-1/810-5/89-11/1641-3/41-3/48.728.758.631/21-1/4
10161-3/1612-3/41241-15/161-15/1610.8810.9210.751/21-5/16
12191-1/41514-3/84-1/22-3/162-3/1612.8812.9212.751/21-9/16
14211-3/816-1/415-3/452-1/43-1/814.1414.1814.001/21-5/8
1623-1/21-7/1618-1/21852-1/23-7/1616.1616.1916.001/21-3/4
18251-9/162119-7/85-1/22-11/163-13/1618.1818.2018.001/21-15/16
2027-1/21-11/1623225-11/162-7/84-1/1620.2020.2520.001/22-1/8
24321-7/827-1/426-1/863-1/44-3/824.2524.2524.001/22-1/2

 

Class 300 Titanium Grade 5 Flanges Dimensions Chart

Class 300 Titanium Grade 5 Flanges Dimensions Chart
Normal Pipe Size (NPS)Outside
Diameter of Flanges (O.D.)
Flanges Thickness (Minimum)Overall LengthCircle Of BoltsNumber And
Size of
Holes
Outside Diameter Of
Raised Face (RF)
Welding
neck flanges
Slip-on flanges
& socket
welding flanges
Lap Joint flanges
OQYDiameterNumberDiameterR
1/29514.352.422.222.2666.541535
3/411715.957.225.425.482.441943
112417.561.927.027.089.041951
1-1/413319.165.127.027.098.541964
1-1/215620.768.330.230.2114.542273
216522.369.833.333.3127.081992
2-1/219025.476.238.138.1149.0822105
321028.679.442.942.9168.0822127
425431885.747.647.6200.0822157
527935.098.450.850.8235.0822186
631336.698.452.452.4270.01222216
6381413111.161.991.9330.01225270
1044447.7117.566.795.3387.51629324
1252150.8130.273.0101.6451.01632381
1458454.0142.976.2111.1514.52032413
1664857.2146.082.6120.7571.52035470
1871160.4158.888.9130.2628.52435533
2077563.5161.995.2139.7686.02435584
2491469.9168.3106.4152.4843.02441692

ASTM B381 Titanium Blind Flanges Size Chart

Size in InchesSize in MillimeterOuter Diameter (O.D.)Flange ThicknessHub Outer DiameterLength Of Pipe FlangeDiameter Of RF (Raised Face) Height Of RF (Raised Face)PCDSocket BoreNumber of BoltBolts Sizes UNCLength Of Machine BoltsLength Of Raised Face (RF) StudsSize Of Bolt HoleSize Of ISO StudsWeight in kilogram
ABCDEFGH
1/215909.6301434.9260.322.241/250555/8M140.8
3/42010011.2381442.9269.927.741/250655/8M140.9
12511012.7491650.8279.434.541/255655/8M140.9
1 1/43211514.3591963.5288.943.241/255705/8M141.4
1 1/24012515.9652173298.449.541/265705/8M141.4
25015017.5782492.12120.761.945/870853/4M162.3
2 1/26518020.79027104.82139.774.645/875903/4M163.2
38019022.3108291272152.490.745/875903/4M163.7
3 1/29021522.312230139.72177.8103.485/875903/4M165
410023022.313532157.22190.5116.185/875903/4M165.9
512525522.316435185.72215.9143.883/485957/8M206.8
615028023.919238215.92241.3170.783/4851007/8M208.6
82003452724643269.92298.5221.583/4901107/8M2013.7
1025040528.630548323.82362276.2127/81001151M2419.5
1230048530.2365543812431.8327127/81001201M2429
1435053533.440056412.82476.3359.21211151351 1/8M2741
164005953545762469.92539.8410.51611151351 1/8M2754
1845063538.150567533.42577.9461.8161 1/81251451 1/4M3059
2050070041.355971584.22635513.1201 1/81401601 1/4M3075
2460081546.166381692.22749.3616201 1/41501701 3/8M33100

 

Titanium Exhaust Flange Torque Settings

Size in InchesSize in MillmeterMax. Radial Projection of Imperfections that are
Serrations, No Deeper Than the Bottom, MillmeterSerrations, Deeper Than the Bottom, Millmeter
1/2153.01.5
3/4203.01.5
1253.01.5
1 1/4323.01.5
1 1/2403.01.5
2503.01.5
2 1/2653.01.5
3804.51.5
3 1/2906.03.0
41006.03.0
51256.03.0
61506.03.0
82008.04.5
102508.04.5
123008.04.5
143508.04.5
1640010.04.5
1845012.06.0
2050012.06.0
2460012.06.0

 

Gasket Chart Of Titanium Header Flange

Nominal Size Of Pipe (NPS)Gasket (I.D.) Inside Diameter

(Inches)
Gasket (O.D.) Outside Diameter
150 LBS 300 LBS 400 LBS 600 LBS 900 LBS
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

 

M8 Titanium Flange Bolt

Class 150 FlangesClass 300 FlangesClass 600 Flanges
Nominal Size Of Pipe (NPS)# Studs And BoltsBolt And Stud DiameterStuds Length# Bolt And StudDiameter of Bolt And StudStuds Length# Bolt And StudDiameter of Bolt And StudStuds Length
1/16 RF (Raised Face)RTJ (Ring Type Joint)1/16 RF (Raised Face)RTJ (Ring Type Joint)1/4 RF (Raised Face)RTJ (Ring Type Joint)
1/240.502-1/440.502-1/2340.5033
3/440.502-1/240.6333-1/240.633-1/23-1/2
140.502-1/2340.6333-1/240.633-1/23-1/2
1-1/440.502-3/43-1/440.633-1/43-3/440.633-3/43-3/4
1-1/240.502-3/43-1/440.753-1/2440.754-1/44-1/4
240.633-1/43-3/480.633-1/2480.634-1/44-1/4
2-1/240.633-1/2480.7544-1/280.754-3/44-3/4
340.633-1/2480.754-1/44-3/480.7555
3-1/280.633-1/2480.754-1/4580.885-1/25-1/2
480.633-1/2480.754-1/2580.885-3/45-3/4
580.753-3/44-1/480.754-3/45-1/481.006-1/26-1/2
680.7544-1/2120.754-3/45-1/2121.006-3/46-3/4
880.754-1/44-3/4120.885-1/26121.137-1/27-3/4
10120.884-1/25161.006-1/46-3/4161.258-1/28-1/2
12120.884-3/45-1/4161.136-3/47-1/4201.258-3/48-3/4
14121.005-1/45-3/4201.1377-1/2201.389-1/49-1/4
16161.005-1/45-3/4201.257-1/28201.501010
18161.135-3/46-1/4241.257-3/48-1/4201.6310-3/410-3/4
20201.136-1/46-3/4241.2588-3/4241.6311-1/411-1/2
24201.256-3/47-1/4241.50910241.881313-1/4

 

ASTM B381 Grade F2 Flange Thickness Calculation AS Per ASME

Wll Thickness Of Titanium Flanges
NPSOutside Diameter (O.D.)Sch/ Schedule 10Sch/ Schedule 20Sch/ Schedule 30STD WallSch/ Schedule 40Sch/ Schedule 60EXT HvySch/ Schedule 80Sch/ Schedule 100Sch/ Schedule 120Sch/ Schedule 140Sch/ Schedule 160XX Hvy
½0.840.0830.1090.1090.1470.1470.1880.294
¾1.050.0830.1130.1130.1540.1540.2190.308
11.3150.1090.1330.1330.1790.1790.250.358
1 ¼1.660.1090.140.140.1910.1910.250.382
1 ½1.90.1090.1450.1450.20.20.2810.4
22.3750.1090.1540.1540.2180.2180.3440.436
2 ½2.8750.120.2030.2030.2760.2760.3750.552
33.50.120.2160.2160.30.30.4380.6
3 ½40.120.2260.2260.3180.3180.636
44.50.120.2370.2370.3370.3370.4380.5310.674
55.5630.1340.2580.2580.3750.3750.50.6250.75
66.6250.1340.280.280.4320.4320.5620.7190.864
88.6250.1480.250.2770.3220.3220.4060.50.50.5940.7190.8120.9060.875
1010.750.1650.250.3070.3650.3650.50.50.5940.7190.84411.1251
1212.750.180.250.330.3750.4060.5620.50.6880.84411.1251.3121
14140.250.3120.3750.3750.4380.5940.50.750.9381.0941.251.406
16160.250.3120.3750.3750.50.6560.50.8441.0311.2191.4381.594
18180.250.3120.4380.3750.5620.750.50.9381.1561.3751.5621.781
20200.250.3750.50.3750.5940.8120.51.0311.2811.51.751.969
22220.250.3750.5……..……..……..
24240.250.3750.5620.3750.6880.9690.51.2191.5311.8122.0622.344……..

 

Largest Independent Manufacturer Of Titanium Flanges

Alloy Titanium Weld Neck Flange

Alloy Titanium Weld Neck Flange

Ti Alloy Pn10 Plate Flanges

Ti Alloy Pn10 Plate Flanges

Titanium Grade 2 Class 300 Slip On Flange

Titanium Grade 2 Class 300 Slip On Flange

Gr 2 Titanium Forged Blind Flange

Gr 2 Titanium Forged Blind Flange

Titanium Gr 2 SWRF Flanges

Titanium Gr 2 SWRF Flanges

Ti Alloy Grade 5 Rtj Flange

Ti Alloy Grade 5 Rtj Flange

Titanium Uns R56400 Flange

Titanium Uns R56400 Flange

Titanium UNS R56400 Reducing Flanges

Titanium UNS R56400 Reducing Flanges

 

We Are Specialised If Supplying Titanium Flanges In Specific Locations

Europe, France, Thailand, Qatar Pn6 Titanium Slip On Flange
Dammam -KSA, Philippines, BelgiumGr2 Titanium Flange for Industrial Use
Bangladesh, USA, Finland, MalaysiaTitanium Lap Joint Flange
Thailand, Germany, Malaysia, Czechia Titanium Alloy Flange
Singapore, South Africa, Singapore, Bahrain Titanium Blind Flange
Kuwait, Saudi Arabia (KSA), Brazil, South Africa Titanium Alloy Weld Neck Flange
Hong Kong, Malaysia, UAE, OmanTitanium Pipe Flange
UK, Australia, Nigeria, PhilippinesTitanium Grade 2 Flanges
Norway, Turkey, Malaysia, United Arab Emirates (UAE)Titanium Grade 5 Flanges
Iran, Italy, Singapore, ChileTitanium Exhaust Flanges
Mexico, Spain, UK, EgyptTI Conflat Flanges
Russia, Malaysia, Dubai, NetherlandsTi Gr 2 And 5 Pipe Flanges
Poland, Canada, Ellington -United States, UKASME B16.5 Titanium Flanges
Malaysia, Europe, UAE, United Kingdom -UK Ti Gr. 2 Long Weld Neck Flanges
Romania, Japan, Malaysia, EuropeUNS R50400 Slip On Flange
Canada, Malaysia, Singapore, PhilippinesASTM B381 Ti Reducing Flanges

 

Grade 2 Titanium Flanges Testing Facility

  • Tensile testing machine
  • Ultrasonic testing machine
  • Mobile spectrometer for PMI test
  • Radiation servo meter

 

Astm B381 Ti Alloy Gr 5 Slip On Flange Surface Treatment

  • Yellow Transparent
  • Oil Black Paint
  • Anti-rust Paint
  • Cold and Hot Dip Galvanized
  • Zinc Plated

 

Titanium Header Flange Face Types and uses

There are six types of flange faces

  • Raised face flange- A RF flange has a protruding hub, which allows it to seal the gaskets by concentrating pressure on the mating flanges to create a strong seal.
  • Flat face flange- FF flanges are used in low-pressure systems as the contact surface has the same height as the bolting line.
  • Ring joint flange- A RTJ flange helps in creating a metal-to-metal seal between different mating flanges. They are used in high-pressure and temperature systems.
  • Lap joint flange- This flange has a flat face which is not used to seal the joint. It is utilized to simply host the back of a stub end.
  • Tongue and groove flanges- Both these flanges fit in each other and effectively seal the flange.
  • Male and female flange- These two flanges are similar to the tongue and groove flanges. Here the male face is ¼ high while the female face is 3/16th deep.

 

Titanium Pipe Flange Version

Flange Version
edgewise, Flat steel, as a flange
flat, as a tire, Flat steel
square steel
Round steel
thighs outwards, Angle steel,
wide leg to the outside, Angle steel
narrow leg to the outside Angle steel,
thighs inside, Angle steel
wide leg inside, Angle steel
narrow leg inside, Angle steel
bridge inside, T-steel
bridge to the outside, T-steel
foot bent upright, T-steel
opening to the outside, U-steel
opening inwards, U-steel
(bent around the X-axis) Double-T carrier
(bent around the Y-axis) Double-T carrier
high edge Rectangular tube
flat, Rectangular tube
square tube
round tube

 

Uns R50400 Weld Neck Flange Manufacturing facilities

  • Bolt Hole drilling: High speed CNC Vertical Machining Center
  • Open / Close Die Forging & Rolling: Hammer /Press / Ring Rolling
  • Raw material cutting: band saw
  • Machining: SPM lathes/ CNC lathes
  • Heat treatment: Solution Annealing (batch annealing furnaces)

 

Werkstoff Nr. 3.7165 Threaded Pipe Flanges Technical data

BLIND FLANGES
Type 05 according to EN 1092-1
  • PN40, PN25, PN16, PN10, PN100, PN63
ANSI B16.5, ANSI B16.47 Series A + B
  • class 1500, class 300, class 150, class 900, class 600, class 2500
FLANGES EN
V-flanges type 11 according to EN 1092-1
  • PN63, PN25, PN40, PN10, PN160, PN100, PN16,
ASTM
WN flanges according to ANSI B16.5, ANSI B16.47 series A + B
  • class 1500, class 300, class 150, class 900, class 600, class 2500
LOOSE FLANGES, SMOOTH FLANGES, FLARES AND COLLARS EN 1092-1 different pressure levels according to ANSI B16.5
  • Lap-joint flanges
  • Socket-weld flanges
  • Slip-on flanges
  • Long-welding-neck flanges
  • Threaded
  • Reducer
VARIOUS SEALING STRIP SHAPES Form A, Form B1 / B2, Form C, Form D,
Form E, Form F, Form G, Form H Linseneindrehung
  • Large / small tongue or groove
  • Ring type joint (RTJ)
  • Raised face
  • Large / small male or female

 

Uns R56400 Socket Weld Flange DIN/ EN Standards

Type EN DIN
Blind Flanges 05 2527
Weld Neck Flanges 11 2627 – 2638
Flat Flanges for Welding 01 2573 | 2576
Threaded Flanges 13 2558 | 2565 – 2569
Loose Flanges 04 2673 – 2676
Loose Flanges 02 2641 | 2642 | 2655 | 2656
Weld Neck Collars 34 2673 – 2676
Weld-on Collars 32 2641 | 2642 | 2655 | 2656
Slip-on Flanges 12 86029 | 86030
Exhaust gas line Flanges 86044
Lapped Flanges 86037
Weld Flanges for Pressure Vessels 28031 | 28033
Welding Flanges 86041
in accordance with drawings Special Flanges

 

Din 3.7035 Flange Packaging and Marking

  • Items are bundled to guarantee that there's no harm amid travel. In case of trades, standard export packaging is drained wooden cases.
  • All flanges are stamped with Degree and our exchange stamp, Part No, Grade, Size
  • On uncommon demands ready to too, make custom checking on our items.

 

Titanium Pipe FlangeClass/Schedule

Flange Schedule/Class Max. Pressure Pipe Size - Pipe Flanges Flange Connection Type
ASME B16.5 Class 150 150 psi 1/2" FNPT
275 psi 1/2" Socket Weld
150 psi 1/2" Welded
150 psi 3/4" FNPT
275 psi 3/4" Socket Weld
275 psi 1-1/4" Socket Weld
275 psi 1-1/2" Socket Weld
150 psi 2" FNPT
275 psi 2" Socket Weld
275 psi 2-1/2" Socket Weld
275 psi 3" Socket Weld
150 psi 4" FNPT
275 psi 4" Socket Weld
ASME B16.5 Class 300 720 psi 1/2" Slip On
1/2" Slip On
1" Slip On
1" Slip On
1-1/4" FNPT
1-1/4" Slip On
1-1/2"
1-1/2"
2"
2"
2-1/2"
2-1/2"
3"
3"
4"
4"

 

Test Certificates of Titanium Exhaust Flanges

  • Third Party Inspection Report
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Manufacturer Test Certificate as per EN 10204 / 3.1B

 

B381 Gr F5 Titanium Pipe Flange Equivalent

STANDARDWERKSTOFF NR.UNS
Titanium Grade 2 Flanges3.7035R50400
Titanium Grade 5 Flanges3.7165R56200

 

UNS R56400 Slip On Flanges Chemical Composition

GradeCNOHTiFe
Titanium Grade 1 Flanges.08 Maximum.03 Maximum.18 Maximum.015 MaximumBal.20 Maximum
Titanium Grade 4 Flanges.08 Maximum.05 Maximum.40 Maximum.015 MaximumBal.50 Maximum
Titanium Grade 7 Flanges.08 Maximum.03 Maximum.25 Maximum.015 MaximumBal.30 Maximum
Titanium Grade 9 Flanges.08 Maximum.03 Maximum.15 Maximum.015 Maximum-.25 Maximum
Titanium Grade 12 Flanges.08 Maximum.03 Maximum.25 Maximum0.15 Maximum-.30 Maximum

 

Werkstoff Nr. 3.7035 Weld Neck Flanges Mechanical Composition

DensityTensile StrengthElongationMelting PointYield Strength (0.2%Offset)
4.5 G/Cm3Psi – 49900 , MPa – 34420 %1665 °C (3030 °F)Psi – 39900 , MPa – 275
4.43 G/Cm3Psi – 138000 , MPa – 95014 %1632 °C (2970 °F)Psi – 128000 , MPa – 880