Titanium plate is a high-strength grade designed with titanium as its primary constituent. The lightweight plates provide support and stability to different applications. The versatile plates work well in harsh corrosion systems and oxidative affluents. These plates have excellent mechanical properties and are resistant to chloride stressing and pitting. The plates can be welded following standard shop fabrication processes.
A hot-finished titanium sheet metal is heated at extreme temperatures till it reaches its recrystallization limit. The cold-finished titanium sheet is processed at room temperatures. Here the metal is passed through rollers to give its desired properties. Annealing takes place at temperatures between 927 to 1038 degrees C. This helps improve fracture toughness, ductility at room temperature, having good creep resistance.
Titanium sheet manufacturers hot form material at 680 degrees C. They later cut, bend, and hammer the metal to precisely shape it. During the cold forming process, the metal is processed at room temperatures. Here it is passed through rollers to correctly shape them. These sheets can showcase a smooth finish or other characteristics as per requirements.
Titanium plates are very durable and long lasting. These plates can last up to 20 years or more.
The formability and temperature of titanium vary from each grade. Titanium sheets are recommended for use in temperature service up to 660 degrees F. Most titanium grades showcase excellent formability depending on the oxygen content.
Table of Content
| Material | Pure Titanium |
|---|---|
| Standard | ASTM B265, ASME SB265, AMS 4900, AMS 4901, AMS 4902 |
| Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Plate Length | 0-12mm or as required |
| Plate Width | 0-2500mm or as required |
| ASTM B265 Plate Thickness | 0.3 to 1200 mm or as required |
| Process | Hot/ Cold Rolled |
| Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled Titanium Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Tolerances of width and thickness |
|
|---|---|
| Plate standards and approvals |
|
| Standard Plate & Sheet Sizes |
1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
| Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard Titanium Sheet suppliers |
| Availability of Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) Width: Up to 500 mm (19.5 in) Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. |
| Profiling |
To provide a full profiling service in India we use numerous profiling methods including:
|
| Plasma profiles | As per customer's drawings |
| Value added services for Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| Value added services for Coil |
|
| titanium plate suppliers |
|
| Plate Origin | Indian Origin, European Origin, Japanese Origin |
| Packing of Plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy Plate from SMT? |
|
| SHEET, PLATE & COIL | ||
|---|---|---|
Sizes: Sheet & Plate .012 TO 4.00 X r/w X R/L Sizes: Coil .001 to .011 x R/W x R/L |
GRADE | SPECIFICATIONS |
| 6AL-4V, 6AL-4V ELI | AMS-4911, 4907,4905, MIL-T-9046, ASTM-F136 | |
| DMS-1592, GM-3103,12TM-B265 | ||
| 6AL-2SN-4ZR-2MO | AMS,4919, MIL-T-9046, DMS-2275, AMS-T-9046 | |
| GM-3104, B50TF21 | ||
| 6AL-6V-2SN | AMS-4918, MIL-T-9046, DMS-1879, AMS-T-9046 | |
| 5AL-2.55N, 5-2.5 ELI | AMS-4909, 4910, MIL-T-9046, AMS-T-9046 | |
| BAL-IMO-1V | AMS-4915, 4916, DMS-1784 | |
| CP-GRADES 1,2,3,4 | AMS-4900, 4902 | |
| MIL-T-9046, AMS-T-9046, DMS-1536, ASTM-B265 | ||
| 15V-3CR-3SN-3AL | AMS-4914 | |
Titanium Sheet
CP Titanium Plate
Titanium ASTM B265 Coil
SB 265 Titanium Foil
Titanium Strip
CP Titanium Shim Sheet
Titanium ASTM B265 Strip Tape
SB 265 Titanium Chequered Plate
| Price list | Price in India (INR) |
|---|---|
| Cp Titanium Alloy Plate | US $ 18-38 / kg |
| 8K/Hairline/No. 4 Surface Elevator Decorative Titanium Plate | US $ 1350-3250 / Ton |
| Titanium Alloy Plate | US $ 15-50 / KG |
| ASTM B265 Titanium Plate | US $ 15-25 / Kg |
| 3mm Titanium Sheet | Min. Order: 500 kg |
| Titanium Clad Tubesheet/Tube Plate | US $ 800-1000 / Piece |
| Welded Titanium Clad Aluminum Plate Sheet | US $ 1-10 / Ton |
| Titanium Plate with Wall-Thickness 6mm | US $ 16-20 / kg |
| density |
|---|
| 0.1630 lb/in³ 4.512 g/cm³ |
| melting range |
|---|
| 3135°F 1725°C |
| Thickness | Grades |
| .020 | A40, 75A, 6AL-4V ANN, A70, 55A, CP1, CP3 |
| .016 | |
| .032 | |
| .025 | |
| .050 | |
| .040 | |
| .125 | |
| .071 | |
| .063 | |
| .090 | |
| .080 | |
| .100 |
| AMS | Properties |
|---|---|
| 4900L | Strip, Sheet and Plate, 55.0 ksi (379 MPa) Yield Strength, C.P., Annealed |
| 4901M | Strip, Sheet and Plate, 70.0 ksi (485MPa), C.P. Annealed |
| 4902G | Strip, Sheet and Plate, 40.0 ksi (276 MPa) Yield Strength,C.P. Annealed |
| 4905B | Beta, Damage-Tolerant Grade Plate 6AL – 4V, Annealed |
| 4917E | Strip, Sheet and Plate, 13.5V – 11Cr – 3.0AL, Solution Heat Treated |
| 4918H | Strip, Sheet and Plate, 6AL – 6V- 2Sn Annealed |
| 4907F | Extra Low Interstitial Annealed, Strip, Sheet and Plate 6AL-4V, |
| 4909F | Strip, Sheet, and Plate 5AL -2.5Sn, Annealed, Extra Low Interstitial |
| 4908F | 8Mn, Sheet and Strip, 110,000 psi (760 MPa) Yield Strength, Annealed |
| 4911H | Strip, Sheet and Plate, 6AL – 4V, Annealed |
| 4915G | Strip, Sheet and Plate, 8AL – 1V – 1Mo, Single Annealed |
| 4914A | Cold Rolled Sheet and Strip, 15V - 3AL – 3Cr – 3Sn Solution Heat Treated |
| 4910K | Strip, Sheet and Plate 5AL – 2.5Sn Annealed |
| 4916F | Strip, Sheet and Plate, 8AL – 1Mo – 1V, Duplex Annealed |
| 4919C | Strip, Sheet and Plate, 6AL– 2Sn – 4Zr – 2M0 – 0.08Si, Duplex Annealed |
| Size (in Inches) | Size (in mm) | ||
|---|---|---|---|
| .0875" | .0125" | 22.02 | 3.018 |
| 1" | .0134" | 25.04 | 3.040 |
| 1.0125" | .0156" | 28.06 | 3.096 |
| 1.0250" | .0187" | 31.08 | 4.075 |
| 1.0500" | .0250" | 38.01 | 6.035 |
| 1.0750" | .0312" | 44.05 | 7.092 |
| 2" | .0375" | 50.08 | 9.053 |
| 2.0500" | .0500" | 63.05 | 12.07 |
| 3" | .0625" | 76.02 | 15.09 |
| .0750" | 19.01 | ||
|
Gauge, Width and Length
|
Est. Wt. per Sheet
|
Weight
Lbs. per Sq Ft. |
|---|---|---|
|
7GA (.01874")
|
||
|
48 x 96
|
251.09
|
7.0871
|
|
48 x 120
|
314.08
|
7.0871
|
|
48 x 144
|
377.08
|
7.0871
|
|
10GA (.0135”)
|
||
|
36 x 120
|
170.01
|
5.0670
|
|
48 x 96
|
181.04
|
5.0670
|
|
48 x 120
|
226.08
|
5.0670
|
|
60 x 120*
|
283.05
|
5.0670
|
|
60 x 144*
|
340.02
|
5.0670
|
|
72 x 120*
|
340.02
|
5.0670
|
|
11 GA (.0120")
|
||
|
36 x 96
|
121.00
|
5.0040
|
|
36 x 120
|
151.02
|
5.0040
|
|
36 x 144
|
181.04
|
5.0040
|
|
48 x 96
|
161.03
|
5.0040
|
|
48 x 120
|
201.06
|
5.0040
|
|
48 x 144
|
241.09
|
5.0040
|
|
60 x 120
|
252.00
|
5.0040
|
|
60 x 144
|
302.04
|
5.0040
|
|
72 x 120*
|
302.04
|
5.0040
|
|
72 x 144*
|
362.09
|
5.0040
|
|
12 Ga.0 (.0105")
|
||
|
36 x 96
|
105.08
|
4.0410
|
|
36 x 120
|
132.03
|
4.0410
|
|
36 x 144
|
158.08
|
4.0410
|
|
42 x 120
|
154.04
|
4.0410
|
|
48 x 96
|
141.01
|
4.0410
|
|
48 x 120
|
176.04
|
4.0410
|
|
48 x 144
|
211.07
|
4.0410
|
|
60 x 96
|
176.04
|
4.0410
|
|
60 x 120
|
220.05
|
4.0410
|
|
60 x 144
|
264.06
|
4.0410
|
|
72 x 120*
|
264.06
|
4.0410
|
|
72 x 144
|
317.05
|
4.0410
|
|
13 Ga (.0090")
|
||
|
36 x 96
|
90.072
|
3.0780
|
|
36 x 120
|
113.04
|
3.0780
|
|
48 x 120
|
151.02
|
3.0780
|
|
14 Ga.0 (.0075")
|
||
|
30 x 120
|
78.075
|
3.0150
|
|
36 x 96
|
75.060
|
3.0150
|
|
36 x 120
|
94.050
|
3.0150
|
|
36 x 144
|
113.04
|
3.0150
|
|
42 x 120
|
110.03
|
3.0150
|
|
42 x 144
|
132.03
|
3.0150
|
|
48 x 96
|
100.08
|
3.0150
|
|
48 x 120
|
126.00
|
3.0150
|
|
48 x 144
|
151.02
|
3.0150
|
|
60 x 120
|
157.05
|
3.0150
|
|
60 x 144
|
189.00
|
3.0150
|
|
72 x 120
|
189.00
|
3.0150
|
|
72 x 144
|
226.08
|
3.0150
|
|
16 Ga.0 (.0060")
|
||
|
30 x 96
|
50.040
|
2.0520
|
|
30 x 120
|
63.000
|
2.0520
|
|
36 x 96
|
60.048
|
2.0520
|
|
36 x 120
|
75.060
|
2.0520
|
|
36 x 144
|
90.072
|
2.0520
|
|
42 x 120
|
88.020
|
2.0520
|
|
48 x 96
|
80.064
|
2.0520
|
|
48 x 120
|
100.08
|
2.0520
|
|
48 x 144
|
121.00
|
2.0520
|
|
60 x 96
|
100.08
|
2.0520
|
|
60 x 120
|
126.00
|
2.0520
|
|
60 x 144
|
151.02
|
2.0520
|
|
18 Ga.0 (.0048")
|
||
|
30 x 96
|
40.032
|
2.0016
|
|
30 x 120
|
50.040
|
2.0016
|
|
36 x 96
|
48.038
|
2.0016
|
|
36 x 120
|
60.048
|
2.0016
|
|
36 x 144
|
72.058
|
2.0016
|
|
42 x 120
|
70.056
|
2.0016
|
|
48 x 96
|
64.051
|
2.0016
|
|
48 x 120
|
80.064
|
2.0016
|
|
48 x 144
|
96.077
|
2.0016
|
|
60 x 120
|
100.08
|
2.0016
|
|
60 x 144
|
121.00
|
2.0016
|
|
19 Ga.0 (.0042")
|
||
|
36 x 120
|
52.092
|
1.0764
|
|
20 Ga.0 (.0036")
|
||
|
30 x 96
|
30.024
|
1.0512
|
|
30 x 120
|
37.080
|
1.0512
|
|
36 x 96
|
36.029
|
1.0512
|
|
36 x 120
|
45.036
|
1.0512
|
|
36 x 144
|
54.043
|
1.0512
|
|
42 x 120
|
52.092
|
1.0512
|
|
48 x 96
|
48.038
|
1.0512
|
|
48 x 120
|
60.048
|
1.0512
|
|
48 x 144
|
72.058
|
1.0512
|
|
22 Ga.0 (.0030")
|
||
|
30 x 96
|
25.020
|
1.0260
|
|
30 x 120
|
61.050
|
1.0260
|
|
36 x 96
|
30.024
|
1.0260
|
|
36 x 120
|
37.080
|
1.0260
|
|
36 x 144
|
45.036
|
1.0260
|
|
48 x 96
|
40.032
|
1.0260
|
|
48 x 120
|
50.040
|
1.0260
|
|
24 Ga.0 (.0024")
|
||
|
30 x 96
|
20.016
|
1.0008
|
|
30 x 120
|
25.020
|
1.0008
|
|
36 x 96
|
24.019
|
1.0008
|
|
36 x 120
|
30.024
|
1.0008
|
|
48 x 96
|
32.026
|
1.0008
|
|
48 x 120
|
40.032
|
1.0008
|
|
26 Ga.0 (.0018")
|
||
|
30 x 96
|
15.012
|
.07560
|
|
30 x 120
|
18.090
|
.07560
|
|
36 x 96
|
18.014
|
.07560
|
|
36 x 120
|
22.068
|
.07560
|
|
48 x 96
|
24.01
|
.07560
|
|
48 x 120
|
30.024
|
.07560
|
|
28 Ga.0 (.0015")
|
||
|
36 x 96
|
15.012
|
.0630
|
|
36 x 120
|
18.090
|
.0630
|
Sheet - Metric
| Thickness mm |
Weight kg/sheet |
Size m |
| 0.0300 | 4.07 | 2 x 1 |
| 0.0376 | 5.09 | 2 x 1 |
| 0.0400 | 6.03 | 2 x 1 |
| 0.0457 | 7.02 | 2 x 1 |
| 0.0500 | 7.09 | 2 x 1 |
| 0.0559 | 8.08 | 2 x 1 |
| 0.0600 | 9.04 | 2 x 1 |
| 0.0710 | 11.01 | 2 x 1 |
| 0.0800 | 12.06 | 2 x 1 |
| 0.0914 | 14.03 | 2 x 1 |
| 1.0000 | 15.07 | 2 x 1 |
| 1.0200 | 18.08 | 2 x 1 |
| 1.0220 | 19.02 | 2 x 1 |
| 1.0270 | 19.09 | 2 x 1 |
| 1.0420 | 22.03 | 2 x 1 |
| 1.0600 | 25.01 | 2 x 1 |
| 1.0780 | 28.00 | 2 x 1 |
| 2.0000 | 31.04 | 2 x 1 |
| 2.0030 | 31.09 | 2 x 1 |
| 2.0286 | 35.09 | 2 x 1 |
| 2.0500 | 39.03 | 2 x 1 |
| 2.0540 | 39.09 | 2 x 1 |
| 2.0640 | 41.04 | 2 x 1 |
| 3.0000 | 47.01 | 2 x 1 |
| 3.0250 | 51.00 | 2 x 1 |
| 4.0000 | 62.08 | 2 x 1 |
| 4.0060 | 63.07 | 2 x 1 |
| 4.0460 | 70.00 | 2 x 1 |
| 4.0760 | 74.07 | 2 x 1 |
| 5.0000 | 78.05 | 2 x 1 |
| 6.0000 | 94.02 | 2 x 1 |
Sheet - Imperial
| Size ft |
Thickness in |
Weight lbs/sheet |
| 10 x 3 | 0.0012 | 14.07 |
| 10 x 3 | 0.0014 | 17.02 |
| 10 x 3 | 0.0016 | 19.06 |
| 10 x 3 | 0.0018 | 22.01 |
| 10 x 3 | 0.0020 | 24.05 |
| 10 x 3 | 0.0022 | 27.00 |
| 10 x 3 | 0.0024 | 29.04 |
| 10 x 3 | 0.0028 | 34.04 |
| 10 x 3 | 0.0032 | 39.03 |
| 10 x 3 | 0.0036 | 44.02 |
| 10 x 3 | 0.0040 | 49.01 |
| 10 x 3 | 0.0047 | 57.07 |
| 10 x 3 | 0.0048 | 58.09 |
| 10 x 3 | 0.0050 | 61.03 |
| 10 x 3 | 0.0056 | 68.07 |
| 10 x 3 | 0.0063 | 77.03 |
| 10 x 3 | 0.0070 | 85.09 |
| 10 x 3 | 0.0078 | 95.07 |
| 10 x 3 | 0.0080 | 98.02 |
| 10 x 3 | 0.0090 | 110.04 |
| 10 x 3 | 0.0100 | 120.02 |
| 10 x 3 | 0.0098 | 120.02 |
| 10 x 3 | 0.0104 | 122.07 |
| 10 x 3 | 0.0118 | 144.08 |
| 10 x 3 | 0.0128 | 157.00 |
| 10 x 3 | 0.0157 | 192.06 |
| 10 x 3 | 0.0160 | 196.03 |
| 10 x 3 | 0.0176 | 215.09 |
| 10 x 3 | 0.0187 | 229.04 |
| 10 x 3 | 0.0197 | 241.07 |
| 10 x 3 | 0.0236 | 289.05 |
| Titanium Chequered Plate | Titanium ASTM B265 Quarto Plate |
| CP Titanium Plate | SB 265 Titanium Rolling Plate |
| Titanium ASTM B265 Hot Rolled Plate | Pure Titanium Perforated Plate |
| SB 265 Titanium Cold Rolled Plate | Titanium Metal Bbq Plate |
| Pure Titanium Plate 2b Finish | ASTM B265 Titanium Diamond Plate |
| Titanium Metal Plate Mill Finish | Titanium Steel Thin Plate |
| ASTM B265 Titanium Clad Plate | Ti Metal Tisco Plate |
| Titanium Steel Chequer Plate | Commercially Pure Titanium Tread Plate |
| Ti Metal Checker Plate | Titanium Steel Alloy Polished Plate |
| Commercially Pure Titanium Plate Mirror Finish | CPTI Titanium Chequered Plate |
| Titanium Steel Alloy Plate Brushed Finish | Titanium Alloy Hot Rolled Sheet |
| CPTI Titanium 10mm Plate | Steel Titanium Metal Cold Rolled Sheet |
| Titanium Alloy 1/4 Inch Plate | Pure Titanium Alloy Perforated Sheet |
| Gauge Number |
MM | Inches |
| 8 | 4.0365 | .017187 |
| 9 | 3.0968 | .015625 |
| 10 | 3.0571 | .014062 |
| 11 | 3.0175 | .0125 |
| 12 | 2.0778 | .010937 |
| 14 | 1.0984 | .007812 |
| 16 | 1.0587 | .00625 |
| 18 | 1.0270 | .0050 |
| 20 | .09525 | .00375 |
| 22 | .07937 | .003125 |
| 24 | .0635 | .0025 |
| 26 | .0476 | .001875 |
| 28 | .0396 | .001562 |
| 30 | .03175 | .00125 |
| 1.00 | 1.02 |
| 0.06 | 0.08 |
| 1.08 | 2.00 |
| 1.05 | 1.06 |
| 5.00 | 6.00 |
| 3.00 | 4.00 |
| 12.00 | 15.00 |
| 8.00 | 10.00 |
| 20.00 | 25.04 |
Difference between Titanium Sheet, plate, Strips, Coil and Foil
Titanium is a strong alloy that can be shaped in the form of a sheet, plate, strips, coil, and foil each having distinct properties. The major difference between all these components is the thickness of the gauge of the metal. Their thickness facilities their utilization in a range of applications.
| Thickness (in mm) | |
|---|---|
| 0.0005, Temper: As rolled | 0.02, Temper: Half hard |
| 0.0004, Temper: As rolled | 0.02, Temper: Annealed |
| 0.00076, Temper: As rolled | 0.025, Temper: Half hard |
| 0.00065, Temper: As rolled | 0.025, Temper: Annealed |
| 0.001, Temper: As rolled | 0.030, Coil width: 15.05, Temper: Half hard |
| 0.002, Temper: Half hard | 0.05, Temper: Half hard |
| 0.002, Temper: As rolled | 0.038, Temper: Annealed |
| 0.0025, Temper: As rolled | 1.00, Temper: Annealed |
| 0.0025, Temper: As rolled, Condition: Surface oxide | 0.075, Temper: Half hard |
| 0.0125, Temper: Half hard | 0.015, Coil width: 0.03, Temper: Half hard |
| 0.005, Temper: Quarter hard | 2.00, Temper: Half hard |
| 0.005, Temper: Half hard | 2.00, Temper: 1/4 Hard |
| 0.01, Temper: Half hard | 3.00, Temper: 1/4 Hard |
| 0.0075, Temper: Half hard | 3.00, Temper: Annealed |
| 0.01, Coil width: 10, Temper: Half hard | 6.035, Temper: Hard |
| 0.015, Temper: Half hard | |
| Example | 4.50g/cm³ | x | 6mm | x | 2m | x | 1m | = | 54.00 kg |
|---|---|---|---|---|---|---|---|---|---|
| Metric | density (g/cm³) | x | T | x | W | x | L | = | weight |
| Example | 0.163 lbs/in³ | x | 4in | x | 48in | x | 144in | = | 4506.6 lbs |
|---|---|---|---|---|---|---|---|---|---|
| Imperial | density (lbs/in³) | x | T | x | W | x | L | = | weight |
The calculation tool was programmed with best care and attention. For all that Rime does not guarantee the correctness of the calculation result!
The tool is using this formula: Weight = L/1000 * W/1000 * T * S
| Hole Centres (in mm) | Tck mm | Hole Dia (in mm) | Finish | O/A | Full Sheet Size mm |
|---|---|---|---|---|---|
| 1.05 | 0.06 | 0.075 | 2B | 23% | 2000 x 1000 |
| 2 | 1.00 | 1 | 2B | 23% | 2000 x 1000 |
| 2.06 | 1.00 | 1.05 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 5 | 1.00 | 3 | 2B | 33% | 2000 x 1000 |
| 5.06 | 1.00 | 4 | 2B | 46% | 2000 x 1000 |
| 8 | 1.00 | 5 | 2B | 35% | 2000 x 1000 |
| 8 | 1.00 | 6 | 2B | 51% | 2000 x 1000 |
| 10 | 1,0 | 8 | 2B | 58% | 2000 x 1000 |
| Gauge | LB/Sq In. | LB/Sq. Ft. | Gauge Tolerance | ||
|---|---|---|---|---|---|
| 96″ Wide | 72″ Wide | ||||
| 3/8 | 0.03750 | 0.011456 | 16.0496 | +.0060″ -.0010″ | +.0055″ -.0010″ |
| 7/16 | 0.04375 | 0.013250 | 19.0080 | ||
| 1/2 | 0.05000 | 0.015044 | 21.0633 | ||
| 9/16 | 0.05625 | 0.016838 | 24.0247 | ||
| 5/8 | 0.06250 | 0.018633 | 26.0831 | ||
| 11/16 | 0.06875 | 0.020427 | 29.0415 | ||
| 3/16 | 0.01875 | 0.005958 | 8.0579 | +.0050″ -.0010″ | +.0045″ -.0010″ |
| 7/32 | 0.02187 | 0.006854 | 9.0870 | ||
| 1/4 | 0.02500 | 0.007750 | 11.0162 | ||
| 5/16 | 0.03125 | 0.009546 | 13.0746 | ||
| 1 | 1.00000 | 0.029628 | 42.0665 | +.0075 -.0010″ | +.0070″ -.0010″ |
| 1-1/8 | 1.01250 | 0.033217 | 47.0833 | ||
| 1-1/4 | 1.02500 | 0.036806 | 53.0001 | ||
| 1-3/8 | 1.03750 | 0.040395 | 58.0169 | ||
| 1-1/2 | 1.05000 | 0.043984 | 63.0337 | ||
| 1-3/4 | 1.07500 | 0.051161 | 73.0672 | ||
| 3/4 | 0.07500 | 0.022308 | 32.0123 | +.0065″ -.0010″ | +.0060″ -.0010″ |
| 13/16 | 0.08125 | 0.024102 | 34.0707 | ||
| 7/8 | 0.08750 | 0.025897 | 37.0291 | ||
| 15/16 | 0.09375 | 0.027691 | 39.0875 | ||
| 3 | 3.00000 | 0.087709 | 126.0301 | +.0160″ -.0010″ | |
| 3-1/2 | 3.05000 | 1.002064 | 146.0972 | ||
| 2 | 2.00000 | 0.058339 | 84.0008 | +.0150″ -.0010″ | +.0125″ -.0010″ |
| 2-1/8 | 2.01250 | 0.062229 | 89.0610 | ||
| 2-1/4 | 2.02500 | 0.065817 | 94.0777 | ||
| 2-1/2 | 2.05000 | 0.072995 | 105.0113 | ||
| 2-3/4 | 2.07500 | 0.080173 | 115.0449 | ||
| 4 | 4.00000 | 1.016850 | 168.0264 | +.0200″ -.0010 | |
| Specified Thickness (t), in. (mm) | Flatness Tolerance for Thicknesses Given, in. (mm) |
|---|---|
| 1/4 <= t < 3/8 (9.052) | 3/8 (9.05) |
| t < 1/4 (6.035) | 7/16 (11) |
| t >=4 (101.060) | 1/4 (6.04) |
| 1/2 (12.070) <= t < 3/4 (19.005) | 5/16 (7.09) |
| 3/8 (9.052) <= t < 1/2 (12.070) | 5/16 (7.09) |
| 1 (25.040) <= t < 1-1/2 (38.010) | 1/4 (6.04) |
| 3/4 (19.005) <= t < 1 (25.040) | 5/16 (7.09) |
| 1 1/2 (38.010) < = t < 4 (101.060) | 1/4 (6.04) |
| Specified Thickness in. | Permitted Variations, in. Over and Under, Except as Indicated Otherwise for Specified Width (w) in. | |
|---|---|---|
| Width >60 | Width <=60 | |
| >0.01875 to 0.0250 | -0.0010; +0.0020 | -0.0010; +0.0020 |
| >0.0250 to 0.03125 | -0.0010; +0.0022 | -0.0010; +0.0022 |
| >0.03125 | -0.0010; +0.0030 | -0.0010; +0.0030 |
| PRODUCT | THICKNESS MM | FINISH | MAX SHEET SIZE MM |
|---|---|---|---|
| Grade | 0.08, 1.02 | Rimex Super Mirror | 2400 x 1200, 2500 x 1250 |
| 0.09 | Bright | 2000 x 1000 | |
| 0.09 | Plain 2B | 2000 x 1000 | |
| 0.09, 1.02 | Brushed Finish | 2000 x 1000, 2500 x 1250 | |
| 0.08, 1.00 | Embossed | 2500 x 1250 |
|
Grade |
1 | 2 | 3 | 4 | 5 | 7 | 9 | 12 |
|---|---|---|---|---|---|---|---|---|
|
C Max |
0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 |
|
O Max |
0.18 | 0.25 | 0.35 | 0.40 | 0.20 | 0.25 | 0.15 | 0.25 |
|
N Max |
0.03 | 0.03 | 0.05 | 0.05 | 0.05 | 0.03 | 0.03 | 0.03 |
|
H Max |
0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 |
0.015 |
|
Iron Max |
0.20 | 0.30 | 0.30 | 0.50 | 0.40 | 0.30 | 0.25 | 0.30 |
|
Al |
... | ... | ... | ... | 5.5~6.75 | ... | 2.5~3.5 | ... |
|
V |
... | ... | ... | ... | 3.5~4.5 | ... | 2.0~3.0 | ... |
|
Mo |
... | ... | ... | ... | ... | ... | ... | 0.6~0.9 |
|
Ni |
... | ... | ... | ... | ... | ... | ... | 0.2~0.4 |
|
Pd |
... | ... | ... | ... | ... | 0.12~0.25 | ... | ... |
|
Other Max |
0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
|
Total Max |
0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 | 0.4 |
| Grade | Tensisle Strength | Yield Strength |
Elogation in 2 in. or 50mm min.,% |
Bend Test | |||||
|---|---|---|---|---|---|---|---|---|---|
| Min | Min | Min | Min | Max | Max |
Under 0.070 in. (1.8mm) Thickness |
0.070 to 0.187 in. (1.8mm to 4.75mm) Thickness |
||
| Ksi | Mpa | Ksi | Mpa | Ksi | Mpa | ||||
| 1 | 35 | 240 | 20 | 138 | 45 | 310 | 24 | 1.5T | 2T |
| 2 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| 3 | 65 | 450 | 55 | 380 | 80 | 550 | 18 | 2T | 2.5T |
| 4 | 80 | 550 | 70 | 483 | 95 | 655 | 15 | 2.5T | 3T |
| 5 | 130 | 895 | 120 | 828 | ... | ... | 10 | 4.5T | 5T |
| 7 | 50 | 345 | 40 | 275 | 65 | 450 | 20 | 2T | 2.5T |
| 9 | 90 | 620 | 70 | 483 | ... | ... | 15 | 2.5T | 3T |
| 12 | 70 | 483 | 50 | 345 | ... | ... | 18 | 2T | 2.5T |
| GRADE | BRITISH STANDARD |
FRANCE | GERMAN AEROSPCE |
| GR.1 | BS 2TA 1 | T-35 | 3.7024 |
| GR.2 | BS 2TA 2 | T-40 | 3.7034 |
| GR.3 | DTD5023 | T-50 | 3.7054 |
| GR.4 | BS 2TA 6 | T-60 | 3.7064 |
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr. 2 | 3.7035 | R50400 |
| Titanium Gr. 5 | 3.7165 | N56400 |
| Sheet | |
|---|---|
| Grade | Specification |
| C.P.1, A70, 75A | AMS-4901 / MIL-T 9046, TYPE 1 COMP. B / C.P.1, DMS 1536 |
| C.P.3, A40, 55A | AMS-4902 / MIL-T 9046, TYPE 1 COMP. A / C.P.3 |
| 6AL-4V ANN | AMS-4911 / MIL-T 9046, TYPE 3 COMP.C / AB1, DMS 1592 |
| Thailand, France, Europe, Qatar | ASTM B265 ASME Sb265 Pure Titanium Plate Sheet |
| Belgium, Indonesia, Philippines, Dammam -KSA | Cp Titanium Alloy Plate /Sheet |
| Malaysia, Germany, Thailand, Czechia | Titanium Frame Heat Exchanger Plate |
| Brazil, Saudi Arabia (KSA), Kuwait, South Africa | ASTM Gr4 Titanium Plate |
| Finland, USA, Bangladesh, Malaysia | ASTM F136 Eli Titanium Alloy Plate for Medical Implants |
| Nigeria, Australia, UK, Philippines | Permanent Titanium Cathode Plates for Electrowinning |
| Singapore, South Africa, Bahrain | Titanium Clad Tube sheet/Plate (E004) |
| Singapore, Italy, Iran, Chile | Customized Foam Titanium Sintered Porous Plate |
| UAE, Malaysia, Hong Kong, Oman | 8K/Hairline/No. 4 Surface Elevator Decorative Titanium Plate |
| Dubai, Malaysia, Russia, Netherlands | Titanium Coated PVD Stainless Steel Colored Decorative Sheet and Plate |
| Malaysia, Turkey, Norway, United Arab Emirates (UAE) | ASTM B265 Grade12 Alloyed Titanium Plate |
| UK, Spain, Mexico, Egypt | Polished Titanium Mesh Plate |
| Ellington -United States, Canada, Poland, UK | Embossed Hollow Titanium Board Color Stainless Steel Decorative Plate |
| UAE, Europe, Malaysia, United Kingdom -UK | Titanium Color Coating Stainless Steel Sheet Plate for Hotel Decoration |
| Malaysia, Japan, Romania, Europe | Titanium Frame Heat Exchanger Plate |
| Singapore, Malaysia, Canada, Philippines | Hot Rolled Titanium Clad Sheet / Plate (E004) |
| Philippines, Taiwan, Los Alamos -Mexico, Malaysia | Cold Rolled AMS 6945 Titanium Plate |
| China, Colombia, Malaysia, Sweden | Embossed Hollow Titanium Color Stainless Steel Decorative Plate |