standard | ISO 10642 |
---|---|
British standards | BS 57 |
Size |
M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes |
Length | 3 mm to 200 mm |
Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: |
DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards, ANSI – American National Standards Institute |
DIN Standard | B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985 |
UTS – Unified Thread Standard | UNC, UNF, UNEF, UNS, NPT, NPTF |
Dimensions | ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded. |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Type | Pan/ Round/ Oval/ Hex Head/ Truss head |
Head | Pan head, flat head, oval head, hex head, phillips head |
Finish | Per ASTM A380/A380M |
Production process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing |
Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc. |
MOQ | 5 pieces |
Free Samples | Yes |
Delivery time | Regular product is about 7-15 days, custom product will according to special requirement |
Payment Terms | T/T, Paypal, Western Union, L/C or Trade Assurance 30% deposit & balance before shipping |
T-Head Bolts | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Available in a large range of Materials and Finishes | ||||||||||||||
Metric | Length (mm) | |||||||||||||
M12 x | 40 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 100 | 125 | 160 | – | – | – |
M16 x | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | 125 | 150 | 160 | 200 | 240 | – |
M20 x | 80 | 90 | 100 | 110 | 120 | 125 | 150 | 160 | 180 | 200 | 240 | 280 | – | – |
M24 x | 80 | 90 | 100 | 110 | 120 | 125 | 150 | 160 | 180 | 200 | 240 | 280 | 300 | 320 |
Imperial | Length (inches) | |||||||||||||
1/2 BSW x | 1 1/2 | 2 | 2 1/2 | 3 | 3 1/2 | 4 | 4 1/2 | 5 | 6 | 7 | 8 | 9 | 10 | 12 |
5/8 BSW x | 2 | 2 1/2 | 3 | 3 1/2 | 4 | 4 1/2 | 5 | 5 1/2 | 6 | 7 | 8 | 9 | 10 | 12 |
3/4 BSW x | 2 1/2 | 3 | 3 1/2 | 4 | 4 1/2 | 5 | 5 1/2 | 6 | 7 | 8 | 9 | 10 | 12 | – |
7/8 BSW x | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | 14 | – | – | – | – |
1 BSW x | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | 14 | 16 | 20 | – | – |
Material
|
Standards
|
Grades
|
---|---|---|
Nickel Alloy |
ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
|
UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
|
Stainless Steel
|
ASTM / ASME A/SA 193 / 194
|
B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4
|
Alloy Steel
|
ASTM / ASME A/SA 193 / 194 GR
|
B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M
|
Duplex Steel
|
UNS NO. S 31803, S 32205
|
Range: M10 TO M100, LENGTH UPTO 5 METERS
|
Nonmetallic Materials:
|
Acrylic, Kel-F, Lexan, Polypropylene, Poly Vinyl Chloride, Teflon, Zytel 31, 101, 105 | |
High-Temp Alloys
|
Discaloy, 19-9 DL, 16-25-6, A286, Titanium, Nimonic 80, Mulitmet, Haynes 25, Greek Ascalloy, Unitemp 252, Udimet 500, Rene 41, Inco 700, Inco 901, Hastelloy X, 235, Waspaloy, RA 330 | |
Copper Base Alloys
|
Copper, Brasses: Yellow, Free-cut, Red, Naval, Bronze: Commercial, Phosphor, Silicon A & B, Aluminum, Silicon-Aluminum, Manganese, Ampco Alloys, Munitz Metal, Cupro-Nicles | |
Aluminum Alloys:
|
1100, 2011, 2014, 2017, 2024, 3003, 5052, 6053, 6061, 7075 | |
Trademarks:
|
Carpenter, Armco, INCO, Cabot, DuPont. | |
Finish:
|
Black Oxide, Zinc Plating, Hot Dip Galvanized |