A Super Duplex plate is designed with mixed microstructure of ferritic and austenitic grade of steel. These plates possess superior strength and have excellent stress corrosion and cracking. With the content of chromium, nickel, and molybdenum, these plates have good resistance to pitting in different conditions. They have good tensile strength and resistance to cracking in moderate temperatures. The plates can be readily welded in place following standard fabrication processes. The versatile plates are common in oil and gas equipment, offshore platforms, chemical processing, desalination plants, and mechanical and structural components.
The Super Duplex 2507 sheet and ASTM A240 Type 2507 plate are ambiguous like a lot of terms in the industry. The Super Duplex 2507 sheet is a thin metal that is cut from a rolled coil. These sheets are available in thicknesses of less than 1mm up to 25mm. The ASTM A240 Type 2507 plate is thicker metal than the latter. These plates are designed in thickness above 150mm or more. The thickness can be as low as 2mm based on certain producers.
The Super Duplex 2507 plate is made up of a dual-microstructure. These plates have excellent corrosion resistance and work well in different oxidative conditions. They provide stability and strength to different applications. The alloy 2507 plates have exceptional strength and have resistance to chloride stress corrosion and high thermal conductivity. The versatile plates have greater tensile and yield strength while showing good ductility and toughness. These plates also showcase tolerance against pitting and crevice corrosion in different conditions.
The Super Duplex stainless steel plates showcase outstanding properties in different conditions. These plates can have a lifespan of over 50 years if they are properly maintained.
Table of Content
| Specification | ASTM A240 / ASME SA240 |
|---|---|
| standards and approvals |
|
| Standard Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
| Thickness | 0.1 to 100 mm Thk |
| Width | 10-2500mm |
| Length | 2m, 2.44m, 3m, or as required |
| Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
| Stock available in form of | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
| Manufacturers | Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
| Plasma profiles | As per customer's drawings |
| Value added services | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Super Duplex 2507 Foil
SAF 2507 Plate
ASTM A240 Type 2507 Super Duplex Strip
SA 240 GR 2507 Coil
Saf 2507 Shim Sheet
SA 240 GR 2507 Strip Tape
Super Duplex Plate
Super Duplex 2507 Chequered Plate
| Super Duplex 2507 Plate Description | Super Duplex 2507 Plate Price |
| DIN 1.4410 2507 Stainless Steel Plate | US $ 6.55-7.45 / kg Min. Order: 50 kg |
| 2507 Cold Rolled Hot Rolled Super Duplex Stainless Steel Sheet Plate | US $ 1300-1400 / Ton |
| 6mm 8mm 10mm 12mm 20mm 2507 Super Duplex Stainless Steel Inox Plate | US $ 1000-5000 / Ton |
| Super Duplex Stainless Steel 0.4mm 0.5mm 0.6mm 2507 Plate | US $ 2900-3100 / Ton |
| Super Duplex Ldx2101 2507 Hot Rolled No. 1 Stainless Steel Plate | US $ 239-1356 / Ton |
| Super Duplex Plate 2507 Inox Stainless Steel Plate 6/8/10/12/20mm | US $ 2000-3000 / Ton |
| Hot Rolled 2507 Super Duplex Stainless Steel Plate | US $ 1000-5000 / Ton |
| 2507 Super Hot Rolled Duplex Stainless Steel Plate | US $ 1000-5000 / Ton |
| Temperature °F | RT | 32 | -4 | -40 |
|---|---|---|---|---|
| Ft-lbs | 162 | 162 | 155 | 140 |
| Temperature °F | -76 | -112 | -148 | -320 |
| Ft-lbs | 110 | 44 | 30 | 7 |
| Super Duplex 2507 Plate Temperature °F | 68 | 212 | 302 | 392 | 482 |
|---|---|---|---|---|---|
| 0.2% Offset Yield Strength, ksi | 80 | 65 | 61 | 58 | 55 |
| Ultimate Tensile Strength, ksi | 116 | 101 | 98 | 95 | 94 |
| Temp. | -50°C | +20°C | -60°F | +70°F |
|---|---|---|---|---|
| Single | 75 J/cm_ | 90 J/cm_ | 54 ft. lbs | 65 ft. lbs |
| Average (5) | 90 J/cm_ | 150 J/cm | 65 ft. lbs | 87 ft. lbs |
| Average (5) | HV10 180-230 | HB : 180-230 | HRC _ 20 |
| STANDARD | WERKSTOFF NR. | UNS |
| Super Duplex 2507 Plate / Sheet | 1.4410 | UNS S32750 / UNS S32760 |
Super Duplex 2507 plate Gauge, Width and Length | Est. Wt. per Sheet | Super Duplex 2507 Plate Weight Lbs. per Sq Ft. |
|---|---|---|
7GA (.01874") | ||
| 48 x 96 | 251.09 | 7.0871 |
| 48 x 120 | 314.08 | 7.0871 |
| 48 x 144 | 377.08 | 7.0871 |
10GA (.0135”) | ||
| 36 x 120 | 170.01 | 5.0670 |
| 48 x 96 | 181.04 | 5.0670 |
| 48 x 120 | 226.08 | 5.0670 |
| 60 x 120* | 283.05 | 5.0670 |
| 60 x 144* | 340.02 | 5.0670 |
| 72 x 120* | 340.02 | 5.0670 |
11 GA (.0120") | ||
| 36 x 96 | 121.00 | 5.0040 |
| 36 x 120 | 151.02 | 5.0040 |
| 36 x 144 | 181.04 | 5.0040 |
| 48 x 96 | 161.03 | 5.0040 |
| 48 x 120 | 201.06 | 5.0040 |
| 48 x 144 | 241.09 | 5.0040 |
| 60 x 120 | 252.00 | 5.0040 |
| 60 x 144 | 302.04 | 5.0040 |
| 72 x 120* | 302.04 | 5.0040 |
| 72 x 144* | 362.09 | 5.0040 |
12 Ga.0 (.0105") | ||
| 36 x 96 | 105.08 | 4.0410 |
| 36 x 120 | 132.03 | 4.0410 |
| 36 x 144 | 158.08 | 4.0410 |
| 42 x 120 | 154.04 | 4.0410 |
| 48 x 96 | 141.01 | 4.0410 |
| 48 x 120 | 176.04 | 4.0410 |
| 48 x 144 | 211.07 | 4.0410 |
| 60 x 96 | 176.04 | 4.0410 |
| 60 x 120 | 220.05 | 4.0410 |
| 60 x 144 | 264.06 | 4.0410 |
| 72 x 120* | 264.06 | 4.0410 |
| 72 x 144 | 317.05 | 4.0410 |
13 Ga (.0090") | ||
| 36 x 96 | 90.072 | 3.0780 |
| 36 x 120 | 113.04 | 3.0780 |
| 48 x 120 | 151.02 | 3.0780 |
14 Ga.0 (.0075") | ||
| 30 x 120 | 78.075 | 3.0150 |
| 36 x 96 | 75.060 | 3.0150 |
| 36 x 120 | 94.050 | 3.0150 |
| 36 x 144 | 113.04 | 3.0150 |
| 42 x 120 | 110.03 | 3.0150 |
| 42 x 144 | 132.03 | 3.0150 |
| 48 x 96 | 100.08 | 3.0150 |
| 48 x 120 | 126.00 | 3.0150 |
| 48 x 144 | 151.02 | 3.0150 |
| 60 x 120 | 157.05 | 3.0150 |
| 60 x 144 | 189.00 | 3.0150 |
| 72 x 120 | 189.00 | 3.0150 |
| 72 x 144 | 226.08 | 3.0150 |
16 Ga.0 (.0060") | ||
| 30 x 96 | 50.040 | 2.0520 |
| 30 x 120 | 63.000 | 2.0520 |
| 36 x 96 | 60.048 | 2.0520 |
| 36 x 120 | 75.060 | 2.0520 |
| 36 x 144 | 90.072 | 2.0520 |
| 42 x 120 | 88.020 | 2.0520 |
| 48 x 96 | 80.064 | 2.0520 |
| 48 x 120 | 100.08 | 2.0520 |
| 48 x 144 | 121.00 | 2.0520 |
| 60 x 96 | 100.08 | 2.0520 |
| 60 x 120 | 126.00 | 2.0520 |
| 60 x 144 | 151.02 | 2.0520 |
18 Ga.0 (.0048") | ||
| 30 x 96 | 40.032 | 2.0016 |
| 30 x 120 | 50.040 | 2.0016 |
| 36 x 96 | 48.038 | 2.0016 |
| 36 x 120 | 60.048 | 2.0016 |
| 36 x 144 | 72.058 | 2.0016 |
| 42 x 120 | 70.056 | 2.0016 |
| 48 x 96 | 64.051 | 2.0016 |
| 48 x 120 | 80.064 | 2.0016 |
| 48 x 144 | 96.077 | 2.0016 |
| 60 x 120 | 100.08 | 2.0016 |
| 60 x 144 | 121.00 | 2.0016 |
19 Ga.0 (.0042") | ||
| 36 x 120 | 52.092 | 1.0764 |
20 Ga.0 (.0036") | ||
| 30 x 96 | 30.024 | 1.0512 |
| 30 x 120 | 37.080 | 1.0512 |
| 36 x 96 | 36.029 | 1.0512 |
| 36 x 120 | 45.036 | 1.0512 |
| 36 x 144 | 54.043 | 1.0512 |
| 42 x 120 | 52.092 | 1.0512 |
| 48 x 96 | 48.038 | 1.0512 |
| 48 x 120 | 60.048 | 1.0512 |
| 48 x 144 | 72.058 | 1.0512 |
22 Ga.0 (.0030") | ||
| 30 x 96 | 25.020 | 1.0260 |
| 30 x 120 | 61.050 | 1.0260 |
| 36 x 96 | 30.024 | 1.0260 |
| 36 x 120 | 37.080 | 1.0260 |
| 36 x 144 | 45.036 | 1.0260 |
| 48 x 96 | 40.032 | 1.0260 |
| 48 x 120 | 50.040 | 1.0260 |
24 Ga.0 (.0024") | ||
| 30 x 96 | 20.016 | 1.0008 |
| 30 x 120 | 25.020 | 1.0008 |
| 36 x 96 | 24.019 | 1.0008 |
| 36 x 120 | 30.024 | 1.0008 |
| 48 x 96 | 32.026 | 1.0008 |
| 48 x 120 | 40.032 | 1.0008 |
26 Ga.0 (.0018") | ||
| 30 x 96 | 15.012 | .07560 |
| 30 x 120 | 18.090 | .07560 |
| 36 x 96 | 18.014 | .07560 |
| 36 x 120 | 22.068 | .07560 |
| 48 x 96 | 24.01 | .07560 |
| 48 x 120 | 30.024 | .07560 |
28 Ga.0 (.0015") | ||
| 36 x 96 | 15.012 | .0630 |
| 36 x 120 | 18.090 | .0630 |
Sheet - Metric
| Super Duplex 2507 Plate Thickness mm | Super Duplex 2507 Plate Weight kg/sheet | Size m |
| 0.0300 | 4.07 | 2 x 1 |
| 0.0376 | 5.09 | 2 x 1 |
| 0.0400 | 6.03 | 2 x 1 |
| 0.0457 | 7.02 | 2 x 1 |
| 0.0500 | 7.09 | 2 x 1 |
| 0.0559 | 8.08 | 2 x 1 |
| 0.0600 | 9.04 | 2 x 1 |
| 0.0710 | 11.01 | 2 x 1 |
| 0.0800 | 12.06 | 2 x 1 |
| 0.0914 | 14.03 | 2 x 1 |
| 1.0000 | 15.07 | 2 x 1 |
| 1.0200 | 18.08 | 2 x 1 |
| 1.0220 | 19.02 | 2 x 1 |
| 1.0270 | 19.09 | 2 x 1 |
| 1.0420 | 22.03 | 2 x 1 |
| 1.0600 | 25.01 | 2 x 1 |
| 1.0780 | 28.00 | 2 x 1 |
| 2.0000 | 31.04 | 2 x 1 |
| 2.0030 | 31.09 | 2 x 1 |
| 2.0286 | 35.09 | 2 x 1 |
| 2.0500 | 39.03 | 2 x 1 |
| 2.0540 | 39.09 | 2 x 1 |
| 2.0640 | 41.04 | 2 x 1 |
| 3.0000 | 47.01 | 2 x 1 |
| 3.0250 | 51.00 | 2 x 1 |
| 4.0000 | 62.08 | 2 x 1 |
| 4.0060 | 63.07 | 2 x 1 |
| 4.0460 | 70.00 | 2 x 1 |
| 4.0760 | 74.07 | 2 x 1 |
| 5.0000 | 78.05 | 2 x 1 |
| 6.0000 | 94.02 | 2 x 1 |
Sheet - Imperial
| Size ft | Thickness in | Super Duplex 2507 Plate Weight lbs/sheet |
| 10 x 3 | 0.0012 | 14.07 |
| 10 x 3 | 0.0014 | 17.02 |
| 10 x 3 | 0.0016 | 19.06 |
| 10 x 3 | 0.0018 | 22.01 |
| 10 x 3 | 0.0020 | 24.05 |
| 10 x 3 | 0.0022 | 27.00 |
| 10 x 3 | 0.0024 | 29.04 |
| 10 x 3 | 0.0028 | 34.04 |
| 10 x 3 | 0.0032 | 39.03 |
| 10 x 3 | 0.0036 | 44.02 |
| 10 x 3 | 0.0040 | 49.01 |
| 10 x 3 | 0.0047 | 57.07 |
| 10 x 3 | 0.0048 | 58.09 |
| 10 x 3 | 0.0050 | 61.03 |
| 10 x 3 | 0.0056 | 68.07 |
| 10 x 3 | 0.0063 | 77.03 |
| 10 x 3 | 0.0070 | 85.09 |
| 10 x 3 | 0.0078 | 95.07 |
| 10 x 3 | 0.0080 | 98.02 |
| 10 x 3 | 0.0090 | 110.04 |
| 10 x 3 | 0.0100 | 120.02 |
| 10 x 3 | 0.0098 | 120.02 |
| 10 x 3 | 0.0104 | 122.07 |
| 10 x 3 | 0.0118 | 144.08 |
| 10 x 3 | 0.0128 | 157.00 |
| 10 x 3 | 0.0157 | 192.06 |
| 10 x 3 | 0.0160 | 196.03 |
| 10 x 3 | 0.0176 | 215.09 |
| 10 x 3 | 0.0187 | 229.04 |
| 10 x 3 | 0.0197 | 241.07 |
| 10 x 3 | 0.0236 | 289.05 |
| Super Duplex 2507 Plate Gauge Number | MM | Inches |
| 8 | 4.0365 | .017187 |
| 9 | 3.0968 | .015625 |
| 10 | 3.0571 | .014062 |
| 11 | 3.0175 | .0125 |
| 12 | 2.0778 | .010937 |
| 14 | 1.0984 | .007812 |
| 16 | 1.0587 | .00625 |
| 18 | 1.0270 | .0050 |
| 20 | .09525 | .00375 |
| 22 | .07937 | .003125 |
| 24 | .0635 | .0025 |
| 26 | .0476 | .001875 |
| 28 | .0396 | .001562 |
| 30 | .03175 | .00125 |
| Super Duplex 2507 PlateThickness (in mm) | |
|---|---|
| 0.0005, Temper: As rolled | 0.02, Temper: Half hard |
| 0.0004, Temper: As rolled | 0.02, Temper: Annealed |
| 0.00076, Temper: As rolled | 0.025, Temper: Half hard |
| 0.00065, Temper: As rolled | 0.025, Temper: Annealed |
| 0.001, Temper: As rolled | 0.030, Coil width: 15.05, Temper: Half hard |
| 0.002, Temper: Half hard | 0.05, Temper: Half hard |
| 0.002, Temper: As rolled | 0.038, Temper: Annealed |
| 0.0025, Temper: As rolled | 1.00, Temper: Annealed |
| 0.0025, Temper: As rolled, Condition: Surface oxide | 0.075, Temper: Half hard |
| 0.0125, Temper: Half hard | 0.015, Coil width: 0.03, Temper: Half hard |
| 0.005, Temper: Quarter hard | 2.00, Temper: Half hard |
| 0.005, Temper: Half hard | 2.00, Temper: 1/4 Hard |
| 0.01, Temper: Half hard | 3.00, Temper: 1/4 Hard |
| 0.0075, Temper: Half hard | 3.00, Temper: Annealed |
| 0.01, Coil width: 10, Temper: Half hard | 6.035, Temper: Hard |
| 0.015, Temper: Half hard | |
| Gauge | LB/Sq In. | LB/Sq. Ft. | Super Duplex 2507 Plate Gauge Tolerance | ||
|---|---|---|---|---|---|
| 96″ Wide | 72″ Wide | ||||
| 3/8 | 0.03750 | 0.011456 | 16.0496 | +.0060″ -.0010″ | +.0055″ -.0010″ |
| 7/16 | 0.04375 | 0.013250 | 19.0080 | ||
| 1/2 | 0.05000 | 0.015044 | 21.0633 | ||
| 9/16 | 0.05625 | 0.016838 | 24.0247 | ||
| 5/8 | 0.06250 | 0.018633 | 26.0831 | ||
| 11/16 | 0.06875 | 0.020427 | 29.0415 | ||
| 3/16 | 0.01875 | 0.005958 | 8.0579 | +.0050″ -.0010″ | +.0045″ -.0010″ |
| 7/32 | 0.02187 | 0.006854 | 9.0870 | ||
| 1/4 | 0.02500 | 0.007750 | 11.0162 | ||
| 5/16 | 0.03125 | 0.009546 | 13.0746 | ||
| 1 | 1.00000 | 0.029628 | 42.0665 | +.0075 -.0010″ | +.0070″ -.0010″ |
| 1-1/8 | 1.01250 | 0.033217 | 47.0833 | ||
| 1-1/4 | 1.02500 | 0.036806 | 53.0001 | ||
| 1-3/8 | 1.03750 | 0.040395 | 58.0169 | ||
| 1-1/2 | 1.05000 | 0.043984 | 63.0337 | ||
| 1-3/4 | 1.07500 | 0.051161 | 73.0672 | ||
| 3/4 | 0.07500 | 0.022308 | 32.0123 | +.0065″ -.0010″ | +.0060″ -.0010″ |
| 13/16 | 0.08125 | 0.024102 | 34.0707 | ||
| 7/8 | 0.08750 | 0.025897 | 37.0291 | ||
| 15/16 | 0.09375 | 0.027691 | 39.0875 | ||
| 3 | 3.00000 | 0.087709 | 126.0301 | +.0160″ -.0010″ | |
| 3-1/2 | 3.05000 | 1.002064 | 146.0972 | ||
| 2 | 2.00000 | 0.058339 | 84.0008 | +.0150″ -.0010″ | +.0125″ -.0010″ |
| 2-1/8 | 2.01250 | 0.062229 | 89.0610 | ||
| 2-1/4 | 2.02500 | 0.065817 | 94.0777 | ||
| 2-1/2 | 2.05000 | 0.072995 | 105.0113 | ||
| 2-3/4 | 2.07500 | 0.080173 | 115.0449 | ||
| 4 | 4.00000 | 1.016850 | 168.0264 | +.0200″ -.0010 | |
| Size (in Inches) | Size (in mm) | ||
|---|---|---|---|
| .0875" | .0125" | 22.02 | 3.018 |
| 1" | .0134" | 25.04 | 3.040 |
| 1.0125" | .0156" | 28.06 | 3.096 |
| 1.0250" | .0187" | 31.08 | 4.075 |
| 1.0500" | .0250" | 38.01 | 6.035 |
| 1.0750" | .0312" | 44.05 | 7.092 |
| 2" | .0375" | 50.08 | 9.053 |
| 2.0500" | .0500" | 63.05 | 12.07 |
| 3" | .0625" | 76.02 | 15.09 |
| .0750" | 19.01 | ||
| Example | 4.50g/cm³ | x | 6mm | x | 2m | x | 1m | = | 54.00 kg |
|---|---|---|---|---|---|---|---|---|---|
| Metric | density (g/cm³) | x | T | x | W | x | L | = | weight |
| Example | 0.163 lbs/in³ | x | 4in | x | 48in | x | 144in | = | 4506.6 lbs |
|---|---|---|---|---|---|---|---|---|---|
| Imperial | density (lbs/in³) | x | T | x | W | x | L | = | weight |
The calculation tool was programmed with best care and attention. For all that Rime does not guarantee the correctness of the calculation result!
The tool is using this formula: Weight = L/1000 * W/1000 * T * S
| 1.00 | 1.02 |
| 0.06 | 0.08 |
| 1.08 | 2.00 |
| 1.05 | 1.06 |
| 5.00 | 6.00 |
| 3.00 | 4.00 |
| 12.00 | 15.00 |
| 8.00 | 10.00 |
| 20.00 | 25.04 |
| Specified Thickness (t), in. (mm) | Flatness Tolerance for Thicknesses Given, in. (mm) |
|---|---|
| 1/4 <= t < 3/8 (9.052) | 3/8 (9.05) |
| t < 1/4 (6.035) | 7/16 (11) |
| t >=4 (101.060) | 1/4 (6.04) |
| 1/2 (12.070) <= t < 3/4 (19.005) | 5/16 (7.09) |
| 3/8 (9.052) <= t < 1/2 (12.070) | 5/16 (7.09) |
| 1 (25.040) <= t < 1-1/2 (38.010) | 1/4 (6.04) |
| 3/4 (19.005) <= t < 1 (25.040) | 5/16 (7.09) |
| 1 1/2 (38.010) < = t < 4 (101.060) | 1/4 (6.04) |
| Specified Thickness in. | Permitted Variations, in. Over and Under, Except as Indicated Otherwise for Specified Width (w) in. | |
|---|---|---|
| Width >60 | Width <=60 | |
| >0.01875 to 0.0250 | -0.0010; +0.0020 | -0.0010; +0.0020 |
| >0.0250 to 0.03125 | -0.0010; +0.0022 | -0.0010; +0.0022 |
| >0.03125 | -0.0010; +0.0030 | -0.0010; +0.0030 |
| Hole Centres (in mm) | Tck mm | Hole Dia (in mm) | Finish | O/A | Full Sheet Size mm |
|---|---|---|---|---|---|
| 1.05 | 0.06 | 0.075 | 2B | 23% | 2000 x 1000 |
| 2 | 1.00 | 1 | 2B | 23% | 2000 x 1000 |
| 2.06 | 1.00 | 1.05 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 5 | 1.00 | 3 | 2B | 33% | 2000 x 1000 |
| 5.06 | 1.00 | 4 | 2B | 46% | 2000 x 1000 |
| 8 | 1.00 | 5 | 2B | 35% | 2000 x 1000 |
| 8 | 1.00 | 6 | 2B | 51% | 2000 x 1000 |
| 10 | 1,0 | 8 | 2B | 58% | 2000 x 1000 |
| C | Cr | Ni | Mo | N | Others |
|---|---|---|---|---|---|
| 0.020 | 25 | 7 | 4.0 | .27 | S=0.001 |
| Ultimate Tensile Strength, ksi | 116 min. |
|---|---|
| 0.2% Offset Yield Strength 0.2%, ksi | 80 min. |
| 0.1% Offset Yield Strength 0.2%, ksi | 91 min. |
| Elongation in 2 inches, % | 15 min. |
| Hardness Rockwell C | 32 max. |
| Impact Energy, ft.-lbs. | 74 min. |
| Super Duplex 2507 Plate Density | lb/in3 | 0.28 |
|---|---|---|
| Modulus of Elasticity | psi x 106 | 29 |
| Coefficient of Thermal Expansion, 68-212°F/°F | x10-6/°F | 7.2 |
| Thermal Conductivity | Btu/h ft °F | 8.7 |
| Heat Capacity | Btu/lb/°F | 0.12 |
| Electrical Resistivity | W-in x 10-6 | 31.5 |
| Dammam -KSA, Indonesia, Belgium, Philippines | Ba 2b Hl 8K Mirror 2507 Super Duplex Steel Sheets/Plates/Coils |
| Qatar, France, Thailand, Europe | 0.3-100mm Super Duplex Stainless Steel Sheet/Plate |
| Czechia, Germany, Malaysia, Thailand | Super Duplex Plate 2507 Inox Stainless Steel Plate 6/8/10/12/20mm |
| Malaysia, USA, Finland, Bangladesh | 2507 Super Duplex Steel Sheet with Mirror Surface |
| South Africa, Saudi Arabia (KSA), Brazil, Kuwait | 2507 6mm Super Duplex Stainless Steel Plate |
| Bahrain, South Africa, Singapore | 6mm 8mm 10mm 12mm 20mm 2507 Super Duplex Stainless Steel Inox Plate |
| Philippines, Australia, Nigeria, UK | 2507 Super Duplex Steel Sheet with Mirror Surface |
| Oman, Malaysia, UAE, Hong Kong | Super Duplex 2507 Stainless Steel Plate 1.0 - 20.0mm |
| Chile, Italy, Singapore, Iran | Super Duplex Stainless Steel 2507 Perforated Metal Sheet Plate |
| United Arab Emirates (UAE), Turkey, Malaysia, Norway | Super Duplex 2507 Stainless Steel Plate with 6mm Thickness |
| Netherlands, Malaysia, Dubai, Russia | super Duplex Stainless Steel Sheet Plate 4*8 Foot |
| Egypt, Spain, UK, Mexico | 2b Finish Cold Rolled Super Duplex 2507 Stainless Steel Coil/Sheet |
| United Kingdom -UK, Europe, UAE, Malaysia | 2b Polished Mirror Finish Super Duplex Plate |
| UK, Canada, Ellington -United States, Poland | Polished Brushed 2b 8K Mirror Finish Super Duplex 2507 Stainless Steel Sheet /Plate |
| Philippines, Malaysia, Singapore, Canada | Mirror No. 8 No. 4 Super Duplex Sheet Plate with Good Quality |
| Europe, Japan, Malaysia, Romania | Super Duplex Sheet 2507 4 X 8 Feet |
| Sweden, Colombia, China, Malaysia | 10mm 15mm 20mm 30mm 200mm Thickness Hot Rolled Super Duplex 2507 Stainless Steel Plate |
| Malaysia, Taiwan, Philippines, Los Alamos -Mexico | Super Duplex Sheet No. 1 Finish |
| Singapore, South Korea, Malaysia, NY 12203 (USA) | Super Duplex 2507 Stainless Steel Sheet 2b/Ba Finish |