Super Duplex 2507 Bolts is super-duplex stainless steel grade. Super Duplex Fasteners is a grade of the austenitic-ferritic stainless steel. Hence it has the structure of both austenitic & ferritic stainless steel. The ferrite content of Super Duplex Screws in a solution annealed and quenched condition is between 35-55%. Applications of stainless steel fasteners such as grade Super Duplex Studs can be found across various industries. For instance, the Super Duplex Nuts and Bolts are used in Flue Gas Scrubbing Equipment, Desalination Equipment, Marine Applications, Chemical process pressure vessels, piping and heat exchangers, Pulp & Paper Mill Equipment, Oil and gas industry equipment as well as the Offshore Oil production and technology.
Super Duplex Stud Bolts such as stainless steel 2507 Duplex is known for its ability to be highly resistant to uniform corrosion when exposed to environments containing organic acids such as formic and acetic acid. These Super Duplex Screws are also highly resistant to inorganic acids as well. This holds true, especially if the acidic medium contains chlorides. Since the content of carbon is low in Alloy 2507, the Super Duplex Washers tends to be highly resistant to carbide- related intergranular corrosion. Due to the Ferritic portion present in the duplex or dual microstructure phase of the alloy, Super Duplex Nuts are very resistant to stress related corrosion cracking or SCC in warm chloride containing environments.
Table of Content
The chemical composition of Grade 2507 Stainless Steel Bolts includes 25% chromium, 4% molybdenum, and 7% nickel along with elements like carbon, nitrogen and copper in smaller amounts. Due to high levels of chemical elements like chromium, molybdenum, and nickel, Super Duplex 2507 Fasteners have a high resistance to inorganic acids which could cause chloride stress corrosion cracking. It is also resistant to corrosion against organic acids, viz acetic and formic acid. The content of carbon in the Super Duplex Hex Bolt is very low. The risk of carbide precipitation during heat treatment at the grain boundaries is lowered in the presence of trace amounts of carbon. It is also highly resistant to carbide related inter-granule corrosion.
Super Duplex Nuts and Bolts are known for their high strength, ductility, malleability, resistance to corrosion and pitting. It is also known for its high mechanical strength and good weldability. Although the strength of Saf 2507 Bolts is really good, exposing it to a temperature higher than 570°F or 298 °C is not recommended as the stainless steel loses its toughness. Because Super Duplex Alloy 2507 Bolts has good tensile strength along with a low coefficient of thermal expansion, high thermal conductivity and impact strength, 2507 Stainless Steel Bolts are suitable for a variety of mechanical and structural components.
Through additions of elements such as chromium, nitrogen and molybdenum in the stainless steel alloy of Super Duplex Stud Bolt localized corrosion such as pitting and crevice attack are improved. Due to a high PREN value, Alloy 2507 Super Duplex Hex Bolt has excellent localized pitting resistance. The PREN value of Super Duplex Hex Bolt is about 42, which is one of the highest values. A higher PREN number indicates outstanding resistance to pitting.
Usage of 2507 Super Duplex Fasteners needs to be limited to applications below a temperature of about 600° F. Prolonged exposure of the Super Duplex Bolts and Nuts at elevated temperature can reduce both the toughness as well as the corrosion resistance of alloy 2507.
Grade 2507 Super Duplex Stainless Steel Fasteners possesses excellent mechanical properties. Besides these properties, the Super Duplex Steel Bolts has characteristics such as Low rate of thermal expansion, Good weldability as well as workability. Super Duplex Stainless Steel Fasteners can be welded with the addition of filler metals in the alloy. This grade of stainless steel does not require a pre heat as well as a post heat treatment for welding.
Standard | ASTM A479 / ASME SA479 |
---|---|
Size | M 02 to M 33 |
Length | 3 mm to 200 mm |
Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: | DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
SCOPE OF MANUFACTURE |
|
Dia | M6 to M64 (1/4" - 2.5") |
Length | 12 MM - 500 MM (Upto 20 Inch) |
IS | 1363, 1364 |
DIN | 931, 933 |
ISO | ISO 3506 |
Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
Finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
Production process | M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element |
Origin and service-region: | European, Origin of Western European. However projects with eastern origin are possible on request. |
Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fasteners Etc. |
Types | Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts |
Price list of Super Duplex 2507 Bolts manufacturer in India | Unit | Super Duplex 2507 Nuts & Bolts Price in India (INR) | Super Duplex 2507 Nut Bolts Price in UK Pound sterling | Super Duplex 2507 Bolts & Nuts Price in UAE Dirham |
---|---|---|---|---|
Super Duplex 2507 Hex Head Bolt, Hex Nut & 2 Plain Washers Size M16 X 65mm | set | 70 | 0.76 UK Pound sterling | 3.60 UAE Dirham |
2507 Stainless Steel Stud, M16 X 90mm Long +2 Heavy Hex Nuts | set | 200 | 2.17 UK Pound sterling | 10.27 UAE Dirham |
Super Duplex Hex Nuts & Stud Bolts M16 X 150mm Long Stud Bolt, Thereading | set | 461 | 5.01 UK Pound sterling | 23.68 UAE Dirham |
Super Duplex Steel Hex Bolt, Nut, Lock Nut,Washer Threaded Rods: M16 X 60mm Hex Bolt/ Nut/ Washer/ Lock Nut | set | 509 | 5.53 UK Pound sterling | 26.14 UAE Dirham |
2507 Super Duplex Hex Head Bolt-M10-45lg | set | 216 | 2.35 UK Pound sterling | 11.09 UAE Dirham |
Super Duplex SS Materials: Full thread Stud + 2 Hex Nuts + 2 Plain Washer M16 X 150 Mm Long | pcs | 537 | 5.84 UK Pound sterling | 27.58 UAE Dirham |
2507 Duplex SS Hex Bolt, Nut, Lock Nut,Washer Threaded Rods: M36 X 300mm Threaded Rod/2 X Std. Nut/2 X Lock Nut/2 X Fw | set | 6,300 | 68.46 UK Pound sterling | 323.56 UAE Dirham |
2507 Stainless Steel Bolts and Set Screws
Super Duplex Socket Head Screws
2507 Duplex SS Nuts
Super Duplex Steel Washers
2507 Super Duplex Threaded Rod
Super Duplex SS Machine Screws
Duplex 2507 Stainless Steel Self Tapping Screws
Super Duplex Stainless Steel Self Drilling Screws
C | N | P | Si | Mn | Mo | Ni | Cr | S | Other |
0.030 | 0.24/0.32 | 0.035 | 0.80 | 1.20 | 3.0/5.0 | 6.00/8.00 | 24.0/26.0 | 0.020 | Cu:0.50 |
United Kingdom -UK, China, Chile, South Africa | Super Duplex 2507 Allen Bolt |
UK, Philippines, United Arab Emirates (UAE), Bahrain | DIN603 Super Duplex 2507 Carriage Bolt |
Philippines, Malaysia, Netherlands | M24 Super Duplex 2507 Stainless Steel Hex Head Bolts |
Europe, Sweden, Egypt, Oman | Custom Design CNC Turning Super Duplex 2507 Anchor Bolts with Nuts |
Spain, Malaysia, Australia, Germany | Super Duplex 2507 Hex Nut with Stud Bolt (M16 X 150MM) |
Europe, Singapore, Malaysia, USA | Saf 2507 F55 1.4410 Double Ended Bolt Snap |
Canada, Japan, Italy, Saudi Arabia (KSA) | Exotic Alloy Super Duplex 2507 Bolt |
Malaysia, Colombia, Turkey, South Africa | Super Duplex Double End Stud Bolt with 2507 Hex Clamp Nut |
Mexico, Taiwan, Malaysia, Thailand | Super Duplex stainless steel DIN933 bolt nut washer 3/8" 7/16' |
Malaysia, South Korea, UK, Bangladesh | Fasteners duplex 2507 1.4462 stainless steel hexagon bolts M6*55 DIN933 |
Poland, Romania, Singapore, Kuwait | Super Duplex 2507 Hex Bolt with Heavy Hex Nuts 1/2" 5/8" |
Canada, Malaysia, Iran, Singapore | Super Duplex F55/Zeron 100/1.4501 Stud Bolts M14 M16 M22 |
Singapore, Los Alamos -Mexico, Norway, Finland | 5/8'' astm stainless steel duplex 2507 hex bolt |
Ellington -United States, NY 12203 (USA), Russia, Brazil | Alloy 2507 u bolt with size of 15X 85 X 400 BODY 16Inch |
Singapore, Dammam -KSA, Hong Kong, UAE | Duplex 2507 hexagon bolts M8*55 DIN 933 |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
STANDARD | UNS | WERKSTOFF NR. |
2507 Super Duplex | UNS S32750 | 1.4410 |
2507 Super Duplex | UNS S32760 | 1.4410 |
2507 Super Duplex Washers | Super Duplex Alloy 2507 Bolts |
Super Duplex 2507 F55 Fender Washer | Duplex 2507 Stainless Steel Foundation Bolts |
F55 Super Duplex Cap Screw | 2507 Duplex SS Pan Head Screw |
Super Duplex 2507 Square Nut | Duplex 2507 Countersunk Slotted Screw |
25cr Super Duplex Steel Nuts | 2507 Super Duplex SS Tie Bar |
Super Duplex Steel 2507 Double Ended Stud | 25cr Duplex Punched Washer |
2507 Super Duplex Square Bolts | 25cr Duplex Steel Coupler Nuts |
Super Duplex Saf 2507 Lock Nut | 25cr Duplex SS Locking Nuts |
25cr Super Duplex Flat Washer | 2507 Duplex Steel Hex Bolts |
Super Duplex SS 2507 StudBolts | 2507 Super Duplex Square Washer |
25cr Super Duplex Stainless Steel Fasteners | Duplex Alloy 2507 Screws |
Super Duplex F55 Hex Cap Screw | Duplex Stainless Steel Grade 2507 Threaded Rod |
2507 Super Duplex Stainless Steel Flat Washer | Inox Duplex 2507 Heavy Hex Nuts |
Super Duplex 2507 UNS S32760 Hex Nuts | Duplex Steel 2507 Round Head Bolts |
2507 Duplex Stainless Steel Spring Washer | F55 Duplex Hexagon Bolts |
2507 Duplex Stainless Full Threaded Stud Bolts | Duplex 1.4501 f55 Heavy Hex Nuts M8 |
Super Duplex Grade 2507 Stud Bolts | Super Duplex 2507 Hex Socket Cap Screw |
Super Duplex Stainless Steel 2507 Eye Bolts | Saf 2507 Super Duplex Stainless Steel High Tensile Fasteners |
Super Duplex 2507 Screws Types | SIZE | GRADE | ASME | ISO | ASTM |
---|---|---|---|---|---|
2507 Stainless Steel Socket Head Cap Screws | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
Super Duplex Socket Low Head Cap Screws | M4 to M20 | 10.9 | |||
2507 Duplex SS Socket Head Shoulder Screws | M6 to M24 | 012.9 | B18.3.3M | ||
Super Duplex Steel Countersunk Socket Head Screws | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
2507 Super Duplex Button Head Socket Screws | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
Super Duplex SS Flange Button Head Socket Screws | M3 to M10 | 012.9 | F835M | ||
Super Duplex Stainless Steel Knurled Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
SS Super Duplex Flat Point Socket Set Screws | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
Duplex 2507 Stainless Steel Dog Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
Super Duplex 2507 F55 Cone Point Socket Set Screws | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
2507 SDSS Plain Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Super Duplex Steel 2507 Taper Pressure Plug | M8 to M22 | - |
B18.1.1 | Small Solid Rivets | B18.8.1 | Clevis Pins and Cotter Pins |
---|---|---|---|
B18.1.2 | Large Rivets | B18.8.2 | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins |
B18.2.1 | Square and Hex Bolts and Screws | B18.9 | Plow Bolts |
B18.2.2 | Square and Hex Nuts | B18.10 | Track Bolts and Nuts |
B18.2.6 | Fasteners for use in Structural Applications | B18.11 | Miniature Screws |
B18.3 | Socket Cap, Shoulder and Set Screws | B18.13 | Screws and Washer Assemblies (Sems) |
B18.5 | Round Head Bolts | B18.15 | Forged Eyebolts |
B18.6.2 | Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws | B18.17 | Wing Nuts, Thumb Screws and Wing Screws |
B18.6.3 | Machine Screws and Machine Screws Nuts | B18.21.1 | Lock Washers |
B18.6.4 | Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws | B18.22.1 | Plain Washers |
B18.7 | General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps | B18.23.1 | Beveled Washers |
Super Duplex 2507 Bolts DIN No. | Description |
---|---|
84 | Slotted Cheese Head Machine Screws |
85 | Slotted Pan Head Machine Screws |
94 | Cotter Pin |
125A | Flat Washer (without Chamfer) |
125B | Flat Washer (with Chamfer) |
127B | Split Lock Washer |
137B | Spring Wave Washer |
315 | Wing Nut |
439B | Machine Screws Hex Nut, Finished Hex Jam Nut |
911 | Long Arm Hex Key |
912 | Hex Socket Head Cap Screws |
916 | Hex Socket Set Screws |
931 | Hex Head Cap Screws Partially Threaded |
933 | Hex Head Cap Screws Fully Threaded |
934 | Finished Hex Nut |
939 | Double End Stud |
960 | Hex Head Cap Screws Partially Threaded |
961 | Hex Head Cap Screws Fully Threaded |
963 | Slotted Flat Head Machine Screws |
964 | Slotted Oval Head Machine Screws |
965 | Phillips Flat Head Machine Screws |
966 | Phillips Oval Head Machine Screws |
975 | Threaded Rod |
980V | Hex Steel Prevailing Torque Lock Nut |
985 | Hex Nylon Insert Lock Nut |
6334 | Rod Coupling Nut |
6797A | External Tooth Lock Washer |
6797J | Internal Tooth Lock Washer |
6912 | Hex Low Socket Head Cap Screws |
6921 | Hex Flange Head Screws |
6923 | Hex Flange Nut |
ISO 7379 | Hex Socket Head Shoulder Screws |
ISO 7380 | Hex Button Socket Head Cap Screws |
7985 | Phillips Pan Head Machine Screws |
7991 | Hex Flat Socket Head Cap Screws |
2507 Stainless Steel Bolts Nominal Diameter (in) | Threads (in) | Torque ft-lb (Dry) | Torque ft-lb (Lubricated) |
---|---|---|---|
1/4" | 20 | 7.4 | 5.5 |
28 | 8.4 | 6.3 | |
5/16" | 18 | 15.1 | 11.4 |
24 | 16.8 | 12.6 | |
3/8" | 16 | 26.9 | 20.2 |
24 | 30.4 | 22.8 | |
7/16" | 14 | 43.0 | 32.3 |
20 | 48.0 | 36.0 | |
1/2" | 13 | 65.6 | 49.1 |
20 | 73.9 | 55.4 | |
9/16" | 12 | 94.5 | 71.0 |
18 | 105.5 | 79.1 | |
5/8" | 11 | 130.5 | 97.9 |
18 | 147.8 | 110.9 | |
3/4" | 10 | 232 | 174 |
16 | 258 | 194 | |
7/8" | 9 | 373 | 280 |
14 | 412 | 309 | |
1" | 8 | 560 | 420 |
14 | 628 | 471 | |
1-1/4" | 7 | 975 | 730 |
12 | 1079 | 809 | |
1-1/2" | 6 | 1696 | 1271 |
12 | 1908 | 1430 |
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | - | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | - | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
Diameter | Head Size |
1/4" | 7/16" |
5/16" | 1/2" |
3/8" | 9/16" |
7/16" | 5/8" |
1/2" | 3/4" |
9/16" | 13/16" |
5/8" | 15/16" |
3/4" | 1 1/8" |
7/8" | 1 5/16" |
1" | 1 1/2" |
Bolt Size
|
USS
|
SAE
|
||||
OD (in.)
|
ID (in.)
|
Thickness
|
OD (in.)
|
ID (in.)
|
Thickness
|
|
1/8 (#6)
|
-
|
-
|
-
|
0.375
|
0.156
|
.036/.065
|
5/32 (#8)
|
-
|
-
|
-
|
0.438
|
0.188
|
.036/.065
|
3/16 (#10)
|
0.560
|
0.250
|
.036/.065
|
0.500
|
0.220
|
.036/.065
|
7/32 (#12)
|
-
|
-
|
-
|
0.562
|
0.250
|
.051/.080
|
1/4 (#14)
|
0.734
|
0.312
|
.051/.080
|
0.625
|
0.281
|
.051/.080
|
5/16
|
0.875
|
0.375
|
.064/.104
|
0.688
|
0.344
|
.051/.080
|
3/8
|
1.000
|
0.438
|
.064/.104
|
0.812
|
0.406
|
.051/.080
|
7/16
|
1.250
|
0.500
|
.064/.104
|
0.922
|
0.469
|
.051/.080
|
1/2
|
1.375
|
0.562
|
.086/.132
|
1.062
|
0.531
|
.074/.121
|
9/16
|
1.469
|
0.625
|
.086/.132
|
1.156
|
0.594
|
.074/.121
|
5/8
|
1.750
|
0.688
|
.108/.160
|
1.312
|
0.656
|
.074/.121
|
3/4
|
2.000
|
0.812
|
.122/.177
|
1.469
|
0.812
|
.108/.160
|
7/8
|
2.250
|
0.938
|
.136/.192
|
1.750
|
0.938
|
.108/.160
|
1
|
2.500
|
1.062
|
.136/.192
|
2.000
|
1.062
|
.108/.160
|
1 1/8
|
2.750
|
1.250
|
.136/.192
|
2.250
|
1.250
|
.108/.160
|
1 1/4
|
3.000
|
1.375
|
.136/.192
|
2.500
|
1.375
|
.136/.192
|
1 3/8
|
3.250
|
1.500
|
.153/.213
|
2.750
|
1.500
|
.136/.213
|
1 1/2
|
3.500
|
1.625
|
.153/.213
|
3.000
|
1.625
|
.153/.213
|
1 5/8
|
3.750
|
1.750
|
.153/.213
|
-
|
-
|
-
|
1 3/4
|
4.000
|
1.875
|
.153/.213
|
-
|
-
|
-
|
1 7/8
|
4.250
|
2.000
|
.153/.213
|
-
|
-
|
-
|
2
|
4.500
|
2.125
|
.153/.213
|
-
|
-
|
-
|
2 1/4
|
4.750
|
2.375
|
.320/.248
|
-
|
-
|
-
|
2 1/2
|
5.000
|
2.625
|
.210/.280
|
-
|
-
|
-
|
2 3/4
|
5.250
|
2.875
|
.228/.410S
|
-
|
-
|
-
|
3
|
5.500
|
3.125
|
.249/.327
|
-
|
-
|
-
|
Weight Imperial | |||||||||||||
STUD BOLT LENGTH (in inches) | 1/2 | 5/8 | 3/4 | 7/8 | 1 | 1 1/8 | 1 1/4 | 1.3/8 | 1 1/2 | 1.5/8 | 1.3/4 | 1 7/8 | |
2.1/2 | 10.8 | ||||||||||||
2.3/4 | 11.6 | 19.8 | |||||||||||
3.1/4 | 12.4 | 21 | 32.4 | ||||||||||
3.1/2 | 13.2 | 22.2 | 34.3 | 50 | |||||||||
4 | 14 | 23.4 | 36.2 | 52.6 | 71.8 | ||||||||
4.1/2 | 14.8 | 24.6 | 38.1 | 55.2 | 75.2 | 102 | |||||||
4.3/4 | 15.6 | 25.8 | 40 | 57.8 | 78.6 | 106 | 137 | ||||||
5 | 16.4 | 27 | 41.9 | 60.4 | 82 | 111 | 142 | 179 | |||||
5.1/2 | 17.2 | 28.2 | 43.8 | 63 | 85.4 | 115 | 147 | 186 | 234 | ||||
6 | 18 | 29.4 | 45.7 | 65.6 | 88.8 | 119 | 153 | 193 | 242 | 289 | |||
6.1/4 | 18.8 | 30.6 | 47.6 | 68.2 | 92.2 | 123 | 158 | 200 | 250 | 298 | 263 | ||
6.1/2 | 19.6 | 32.3 | 49.5 | 70.8 | 95.6 | 128 | 164 | 206 | 258 | 308 | 374 | 437 | |
7 | 20.4 | 33.5 | 50.8 | 73.4 | 99 | 132 | 169 | 213 | 266 | 317 | 385 | 449 | |
7.1/2 | 21.2 | 34.8 | 52.7 | 75.5 | 103 | 136 | 174 | 220 | 275 | 326 | 396 | 462 | |
8 | 22 | 36.1 | 54.5 | 78 | 106 | 141 | 180 | 226 | 283 | 336 | 407 | 475 | |
8.1/4 | 37.3 | 56.3 | 80.5 | 108 | 145 | 185 | 233 | 291 | 345 | 418 | 488 | ||
8.3/4 | 38.6 | 58.1 | 83.1 | 112 | 149 | 191 | 240 | 299 | 354 | 429 | 500 | ||
9 | 39.8 | 60 | 85.6 | 115 | 153 | 196 | 246 | 307 | 364 | 440 | 513 | ||
9.1/2 | 41.1 | 61.8 | 88.2 | 118 | 158 | 201 | 253 | 316 | 373 | 451 | 526 | ||
10 | 63.7 | 90.7 | 122 | 162 | 206 | 260 | 324 | 382 | 463 | 538 | |||
10/1.4 | 93.3 | 125 | 166 | 212 | 267 | 332 | 391 | 474 | 551 | ||||
1.0.1/2 | 128 | 171 | 217 | 273 | 340 | 401 | 485 | 564 | |||||
11 | 132 | 175 | 223 | 279 | 345 | 410 | 496 | 576 | |||||
11.1/2 | 135 | 179 | 228 | 285 | 350 | 419 | 507 | 589 | |||||
12 | 138 | 184 | 233 | 292 | 358 | 429 | 518 | 602 | |||||
Weight Of Metric Studs Bolt | |||||||||||||
STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 |
60 | 5,6 | 8,1 | 12 | 15,6 | |||||||||
70 | 6,1 | 8,9 | 13 | 16,9 | 23,7 | ||||||||
80 | 6,6 | 9,6 | 14 | 18,2 | 25,4 | 32,5 | |||||||
90 | 7,1 | 10,3 | 15 | 19,6 | 27,1 | 34,5 | 45,5 | ||||||
100 | 7,6 | 11 | 16 | 21 | 28,8 | 36,7 | 47,2 | 54,2 | |||||
110 | 8,1 | 11,7 | 17 | 22,2 | 30,4 | 38,7 | 48,3 | 58,2 | 80 | ||||
120 | 8,6 | 12,4 | 18 | 23,6 | 32,1 | 40,7 | 50,9 | 60,2 | 84,7 | 107 | |||
130 | 9,1 | 13,2 | 19 | 24,9 | 33,7 | 42,8 | 53,4 | 63,2 | 88,6 | 111 | 141 | ||
140 | 9,6 | 14,2 | 20 | 26,2 | 35,4 | 44,9 | 55,9 | 66,2 | 92,4 | 116 | 147 | 185 | |
150 | 10,1 | 14,9 | 20,8 | 27,5 | 36,9 | 46,9 | 58,5 | 69,2 | 96,3 | 121 | 153 | 192 | 237 |
160 | 10,6 | 15,6 | 21,8 | 29,1 | 38,6 | 49 | 61 | 72,2 | 100,1 | 126 | 159 | 199 | 245 |
170 | 16,4 | 22,8 | 30,4 | 40,2 | 51,1 | 63,5 | 75,2 | 104 | 130 | 165 | 206 | 253 | |
180 | 23,8 | 31,8 | 41,9 | 52,3 | 66,1 | 78,1 | 108 | 135 | 171 | 213 | 261 | ||
190 | 33,1 | 43,5 | 54,4 | 68,4 | 81,1 | 112 | 140 | 176 | 219 | 269 | |||
200 | 34,5 | 45,2 | 56,2 | 71 | 84 | 116 | 144 | 182 | 226 | 278 | |||
210 | 35,8 | 46,8 | 58,5 | 73,5 | 88,4 | 120 | 149 | 188 | 233 | 286 | |||
220 | 37,1 | 48,4 | 60,6 | 76,1 | 91,4 | 124 | 154 | 194 | 240 | 294 | |||
230 | 38,5 | 50,1 | 62,6 | 78,6 | 94,4 | 127 | 159 | 201 | 247 | 302 | |||
240 | 39,8 | 51,7 | 64,7 | 81,2 | 97,4 | 130,9 | 164 | 208 | 253 | 310 | |||
250 | 41,1 | 53,4 | 66,8 | 83,7 | 100,4 | 134,8 | 172 | 214 | 260 | 319 | |||
260 | 55 | 68,8 | 86,3 | 103,4 | 138,6 | 177 | 220 | 267 | 327 | ||||
270 | 56,6 | 70,9 | 88,8 | 106,4 | 142,5 | 182 | 224 | 274 | 335 | ||||
280 | 58,3 | 73 | 91,4 | 109,4 | 146,3 | 187 | 230 | 281 | 343 | ||||
290 | 75 | 93,9 | 112,4 | 150,1 | 192 | 236 | 291 | 360 | |||||
300 | 77,1 | 96,5 | 115,4 | 154 | 196 | 241 | 298 | 368 | |||||
320 | 101,6 | 121,3 | 161,7 | 206 | 253 | 312 | 380 | ||||||
340 | 127,3 | 169,4 | 215 | 265 | 326 | 395 | |||||||
360 | 133,3 | 177,1 | 224 | 276 | 340 | 411 | |||||||
380 | 184,8 | 234 | 288 | 353 | 428 | ||||||||
400 | 192,5 | 243 | 299 | 367 | 444 | ||||||||
420 | 252 | 311 | 381 | 460 | |||||||||
440 | 262 | 322 | 394 | 477 | |||||||||
460 | 271 | 334 | 408 | 493 | |||||||||
480 | 281 | 345 | 422 | 509 | |||||||||
500 | 290 | 357 | 436 | 526 |
Nominal Size or Basic Major Thread Diameter |
F |
G |
H |
||||||
Width Across Flats |
Width Across Corners |
Thickness |
|||||||
Basic |
Max |
Min |
Max |
Min |
Basic |
Max |
Min |
||
1/4 |
.2500 |
7/16 |
.438 |
.428 |
.505 |
.488 |
7/32 |
.226 |
.212 |
5/16 |
.3125 |
1/2 |
.500 |
.489 |
.577 |
.557 |
17/64 |
.273 |
.258 |
3/8 |
.3750 |
9/16 |
.562 |
.551 |
.650 |
.628 |
21/64 |
.337 |
.479 |
7/16 |
.4375 |
11/16 |
.688 |
.675 |
.794 |
.768 |
3/8 |
.385 |
.365 |
1/2 |
.5000 |
3/4 |
.750 |
.736 |
.866 |
.840 |
7/16 |
.448 |
.427 |
9/16 |
.5625 |
7/8 |
.875 |
.861 |
1.010 |
.982 |
31/64 |
.496 |
.473 |
5/8 |
.6250 |
15/16 |
.938 |
.922 |
1.083 |
1.051 |
35/64 |
.559 |
.535 |
3/4 |
.7500 |
1-1/8 |
1.125 |
1.088 |
1.299 |
1.240 |
41/64 |
.665 |
.617 |
7/8 |
.8750 |
1-5/16 |
1.312 |
1.269 |
1.516 |
1.447 |
3/4 |
.776 |
.724 |
1 |
1.0000 |
1-1/2 |
1.500 |
1.450 |
1.732 |
1.653 |
55/64 |
.887 |
.831 |
1-1/8 |
1.1250 |
1-11/16 |
1.688 |
1.631 |
1.949 |
1.859 |
31/32 |
.999 |
.939 |
1-3/8 |
1.3750 |
2-1/16 |
2.062 |
1.994 |
2.382 |
2.273 |
1-11/64 |
1.206 |
1.138 |
1-1/2 |
1.500 |
2-1/4 |
2.250 |
2.175 |
2.598 |
2.480 |
1-9/32 |
1.ASTM A194 GR. 8 |
1.245 |
1-5/8 |
1.6250 |
2-7/16 |
2.438 |
2.356 |
2.815 |
2.686 |
1-25/64 |
1.429 |
1.353 |
1-3/4 |
1.7500 |
2-5/8 |
2.625 |
2.538 |
3.031 |
2.893 |
1-1/2 |
1.540 |
1.460 |
2 |
2.0000 |
3 |
3.000 |
2.900 |
3.464 |
3.306 |
1-23/32 |
1.763 |
1.675 |
2-1/4 |
2.2500 |
3-3/8 |
3.375 |
3.263 |
3.897 |
3.719 |
1-15/16 |
1.986 |
1.890 |
2-1/2 |
2.5000 |
3-3/4 |
3.750 |
3.625 |
4.330 |
4.133 |
2-5/32 |
2.209 |
2.105 |
2-3/4 |
2.7500 |
4-1/8 |
4.125 |
3.988 |
4.763 |
4.546 |
2-3/8 |
2.431 |
2.319 |
Hex Bolt Dimensions, Sizes, Threads per Inch, Head Dimensions & Minimum Threaded Length | ||||||||
Nominal Size | Threads per Inch |
Head Width | Head Height |
Minimum Threaded Length |
||||
---|---|---|---|---|---|---|---|---|
Across Flats |
Across Corners |
|||||||
Fraction | Decimal | UNC | UNF | Basic | Avg | Basic | ≤6" | >6" |
1/4 | 0.2500 | 20 | 28 | 7/16 | 1/2 | 5/32 | 3/4 | 1 |
5/16 | 0.3125 | 18 | 24 | 1/2 | 9/16 | 13/64 | 7/8 | 1 1/8 |
3/8 | 0.3750 | 16 | 24 | 9/16 | 41/64 | 15/64 | 1 | 1 1/4 |
7/16 | 0.4375 | 14 | 20 | 5/8 | 45/64 | 9/32 | 1 1/8 | 1 3/8 |
1/2 | 0.5000 | 13 | 20 | 3/4 | 55/64 | 5/16 | 1 1/4 | 1 1/2 |
9/16 | 0.5625 | 12 | 18 | 13/16 | 59/64 | 23/64 | 1 3/8 | 1 5/8 |
5/8 | 0.6250 | 11 | 18 | 15/16 | 1 1/16 | 25/64 | 1 1/2 | 1 3/4 |
3/4 | 0.7500 | 10 | 16 | 1 1/8 | 1 9/32 | 15/32 | 1 3/4 | 2 |
7/8 | 0.8750 | 9 | 14 | 1 5/16 | 1 31/64 | 35/64 | 2 | 2 1/4 |
1 | 1.0000 | 8 | 12 | 1 1/2 | 1 45/64 | 39/64 | 2 1/4 | 2 1/2 |
1 1/8 | 1.1250 | 7 | 12 | 1 11/16 | 1 29/32 | 11/16 | 2 1/2 | 2 3/4 |
1 1/4 | 1.2500 | 7 | 12 | 1 7/8 | 2 7/64 | 25/32 | 2 3/4 | 3 |
1 3/8 | 1.3750 | 6 | 12 | 2 1/16 | 2 21/64 | 27/32 | 3 | 3 1/4 |
1 1/2 | 1.5000 | 6 | 12 | 2 1/4 | 2 17/32 | 1 5/16 | 3 1/4 | 3 1/2 |
Size | Finished Hex | Heavy Hex | Finished Jam | Heavy Hex Jam | Square | Heavy Square |
1/2" Nut | 3.75 | 6.54 | 2.62 | 4.00 | 5.78 | 7.87 |
5/8" Nut | 7.33 | 11.9 | 4.93 | 6.96 | 10.8 | 14.3 |
3/4" Nut | 11.9 | 19.3 | 7.70 | 11.0 | 15.4 | 23.5 |
7/8" Nut | 19.0 | 29.7 | 12.0 | 16.7 | 24.5 | 36.2 |
1" Nut | 28.3 | 42.5 | 17.6 | 23.5 | 36.3 | 51.5 |
11/8" Nut | 40.3 | 59.2 | 24.7 | 32.4 | 52.5 | 72.4 |
11/4" Nut | 54.3 | 78.6 | 36.1 | 45.8 | 70.6 | 95.5 |
13/8" Nut | 73.0 | 102 | 47.9 | 59.3 | 94.5 | 125.0 |
11/2" Nut | 94.3 | 131 | 60.9 | 74.8 | 122 | 161 |
15/8" Nut | 162 | 91.6 | ||||
13/4" Nut | 151 | 204 | 100 | 114 | ||
17/8" Nut | 241 | 134 | ||||
2" Nut | 224 | 299 | 140 | 165 | ||
21/4" Nut | 419 | 227 | ||||
21/2" Nut | 564 | 332 | ||||
23/4" Nut | 738 | 429 | ||||
3" Nut | 950 | 545 | ||||
31/4" Nut | 1194 | 651 | ||||
31/2" Nut | 1526 | 851 | ||||
33/4" Nut | 1812 | 1005 | ||||
4" Nut | 2180 | 1200 |
Sizes | A | B | C | Weight (lbs.) Per 100 Pieces |
Inside Diameter | Outside Diameter | Thickness | ||
1/2 | 9/16 | 13/8 | 0.109 | 4 |
5/8 | 11/16 | 13/4 | 0.134 | 8 |
3/4 | 13/16 | 2 | 0.148 | 11 |
7/8 | 15/16 | 21/4 | 0.165 | 15 |
1 | 11/16 | 21/2 | 0.165 | 19 |
11/8 | 11/4 | 23/4 | 0.165 | 22 |
11/4 | 13/8 | 3 | 0.165 | 26 |
13/8 | 11/2 | 31/4 | 0.180 | 33 |
11/2 | 15/8 | 31/2 | 0.180 | 38 |
15/8 | 13/4 | 33/4 | 0.180 | 43 |
13/4 | 17/8 | 4 | 0.180 | 50 |
17/8 | 2 | 41/4 | 0.180 | 57 |
2 | 21/8 | 41/2 | 0.180 | 63 |
21/4 | 23/8 | 43/4 | 0.220 | 83 |
21/2 | 25/8 | 5 | 0.238 | 96 |
23/4 | 27/8 | 51/4 | 0.259 | 110 |
3 | 31/8 | 51/2 | 0.284 | 130 |
Nominal |
Thread. |
Hex Socket Size |
Body diameter and Head height |
Head Dia |
Soc. length |
||
Size |
Pitch |
Max |
Min |
Max |
Min |
||
J |
D /H |
A |
K |
||||
M3 |
0.5 |
2.50 |
3.00 |
2.86 |
5.50 |
5.20 |
1.3 |
M4 |
0.70 |
3.00 |
4.00 |
3.82 |
7.00 |
6.64 |
2.00 |
M5 |
0.8 |
4.00 |
5.00 |
4.82 |
8.50 |
8.14 |
2.70 |
M6 |
1.0 |
5.00 |
6.00 |
5.82 |
10.00 |
9.64 |
3.30 |
M8 |
1.25 |
6.00 |
8.00 |
7.78 |
13.00 |
12.57 |
4.3 |
M10 |
1.5 |
8.00 |
10.00 |
9.78 |
16.00 |
15.57 |
5.50 |
M12 |
1.75 |
10.00 |
12.00 |
11.73 |
18.00 |
17.57 |
6.60 |
M16 |
2.0 |
14.00 |
16.00 |
15.73 |
24.00 |
23.48 |
8.80 |
M20 |
2.5 |
17.00 |
20.00 |
19.67 |
30.00 |
29.48 |
10.70 |
M24 |
3.0 |
19.00 |
24.00 |
23.67 |
36.00 |
35.38 |
12.90 |
Nut Size (mm) |
Diameter* (mm) |
Height (mm) |
||
---|---|---|---|---|
Hex Nut |
Jam Nut |
Nylock Nut |
||
2 |
4 |
1.6 |
1.2 |
|
2.5 |
5 |
2 |
1.6 |
|
3 |
5.5 |
2.4 |
1.8 |
4 |
4 |
7 |
3.2 |
2.2 |
5 |
5 |
8 |
4 |
2.7 |
5 |
6 |
10 |
5 |
3.2 |
6 |
7 |
11 |
5.5 |
3.5 |
|
8 |
13 |
6.5 |
4 |
8 |
10 |
17 |
8 |
5 |
10 |
12 |
19 |
10 |
6 |
12 |
14 |
22 |
11 |
7 |
14 |
16 |
24 |
13 |
8 |
16 |
18 |
27 |
15 |
9 |
18.5 |
20 |
30 |
16 |
10 |
20 |
* This is the diameter across the flats. It is also the size of wrench to use. |