Stainless Steel Threaded Rod

SS 304 Double End Threaded Rod Manufacturer in India

Stainless Steel Threaded Rod

Manufacturer and exporter of SS316 Threaded Rod in all types including Acme, Trapezoidal, Long, and Partially Threaded Bars in India, view Dimensions, Weight Chart And Price List ex Mumbai

 

 

What is Stainless Steel Threaded Rod?

A threaded Rod can be defined as a type of fastener that is quite long and comes with thread on both ends. The threads in the rod might extend on either side of the entire rod length. They are commonly called stud by the manufacturers. Depending on the grade of stainless steel used for making the threaded rods, their strength generally ranges between 70 to 220 ksi. The 316 Stainless Steel Threaded Rod can resist corrosion and can be used for various structural applications.

 

What is SS 304 Double End Threaded Rod?

The double ended SS 304 Threaded Rod comes with threads on both ends. They have an unthreaded portion in the middle of the fastener. Its one end is installed in a tapped hole and the other end is used for clamping a fixture to the surface. They are used with a hex nut or a washer. Being made of 304 grade ss, they are very cost effective and have a long service life with a high mechanical strength.

 

What is Acme and Trapezoidal SS316 Threaded Rod?

The acme thread comes with a 29-degree flank angle. It is primarily adopted in the United States. They were designed for replacing the triangular threads. The Trapezoidal thread possesses 30-degree flank angle, and it is adopted in the European Union. They are metal rods that have continuous trapezoidal shaped threads, and it is present throughout the rod length.

 

What does 2A and 2B mean for Stainless Steel Studs threads?

2A and 2B are the most popular classes of thread that are specified for the inch series mechanical fasteners. The class 2A external thread comes with an allowance, whereas the class 2B internal thread in M12 Stainless Steel Threaded Rod does not.

 

Difference between SS Studs and Threaded Rod

The ss threaded rod or Stainless Steel Studs are the same. They are basically long rods that are threaded on both ends. The thread can sometimes extend through the complete length of the rod. They are primarily designed for use in tension and they can fasten large parts together.

 

Top 9 Methods of Making Threads used by Stainless Steel Threaded Rod manufacturers

The top 9 methods of making threads by SS All Thread Rod manufacturers are:

  • Casting
  • Rolling
  • Chasing
  • Die-Cutting
  • Self-Opening Die Heads
  • Taps
  • Milling
  • Grinding
  • Scru Broach

 

Stainless Steel Threaded Rod
Stainless Steel Threaded Rod
316 SS Threaded Rod
316 SS Threaded Rod
A2-70 Double End Threaded Rod
A2-70 Double End Threaded Rod

 

Specifications List of Stainless Steel Threaded Rod

Best price of M3/ M4/ M5 Metric Stainless Steel Threaded Rod in India, 5mm/10mm/12 mm sizes SS Threaded Stud manufacturer in India

stainless steel threaded rod manufacturing

Production Process Cold Heading, Wire Drawing, Inspection, Heat Treatment, Insert tapping, Packing, Surface Plating
Stainless Steel Threaded Rod Dimensions
ASME B18.3, B18.2.1
Thread Requirements UNF and UNC, ASME B1.1, Class 2A
Neck Square, Hex, Oval, Triangular, Knurled etc
necessary need
Free from Radioactive and Mercury Contamination
Extra Certificate
Certified with Merkblatt AD 2000 W2 and PED 97/23/EC
Stainless Steel Threaded Rod Certification
Dual Certified As per ASTM and ASME Codes
Stainless Steel Threaded Rod Extra Need
As stainless steel threaded rod manufacturers Provide MR0175 / /ISO 15156/ NACE MR0103 Compliance
Melt Origin
Korea/East Europe/ Japan/ South America
Origin of Product
Indian
Threads Configuration
Metric Coarse Threads B1.13M 6h and ASME 3A/B1.1 2A Inch

 

Price List of A2-70 Double End Threaded Rod
Description Price
Stainless Steel 304 316/Full Threaded Rods US $ 0.15-0.18 / Piece
ASTM A193 B7/B7m Stainless Steel HDG Half Fully Thread Threaded Rods US $ 0.25 / Piece
Threaded Rod Stainless Steel 304 and 316, DIN975 DIN976 US $ 5000 / Piece
Customized Size Stainless Steel Threaded Rod DIN 975 DIN 976 US $ 0.01-2 / Piece
Stainless Steel Fully Threaded Rod US $ 0.15 / Piece

 

M16/M8/M5/M12 Stainless Steel Threaded Rod manufacturers according to british and European Standard

 

Stainless Steel Threaded Rod Manufacturer in india
Stainless Steel All Thread Stainless Steel All Thread
Stainless Steel Threaded Bar Stainless Steel Threaded Bar
SS Threaded Rod SS Threaded Rod
Stainless Steel Acme Threaded RodStainless Steel Acme Threaded Rod
Stainless Steel Rod With Threaded Ends Stainless Steel Rod With Threaded Ends
304 Stainless Steel Threaded Rod 304 Stainless Steel Threaded Rod
316 SS Threaded Rod 316 SS Threaded Rod
M5 Threaded RodM5 Threaded Rod

 

Know our markets and metals we are supplying for 20 years
Threaded Bar 6mm 8mm 12mm stainless Steel Acme Trapezoidal Threaded Rod Indonesia, Philippines, Dammam -KSA, Belgium
DIN975 DIN976 ANSI Standard Full Threaded Rod with Zinc Plated or Stainless Steel MaterialFrance, Europe, Qatar, Thailand
M14 X 1000 3.66 M DIN975 DIN 976 Stainless Steel Threaded RodGermany, Thailand, Czechia, Malaysia
Threaded Rod Stainless Steel 304 and 316, DIN975 DIN976USA, Bangladesh, Malaysia, Finland
DIN975 Stainless Steel Thread Threaded RodSaudi Arabia (KSA), Kuwait, South Africa, Brazil
Stainless Steel DIN 975 Threaded Rod with Coarse ThreadSouth Africa, Singapore, Bahrain
2 Stainless Steel AISI 316L Threaded RodAustralia, UK, Philippines, Nigeria
M6-M24 Stainless Steel SS316 Threaded RodMalaysia, Hong Kong, Oman, UAE
DIN 975 Stainless Steel Full Threaded RodItaly, Iran, Chile, Singapore
DIN976 Stainless Steel Threaded RodTurkey, Norway, United Arab Emirates (UAE), Malaysia
Stainless Steel Internally 4m Threaded Rod Internal ThreadMalaysia, Russia, Netherlands, Dubai
Stainless Steel 304/316 Threaded Rod M2-M20Spain, Mexico, Egypt, UK
Full/Half Thread Anti-Corrosion Stainless Steel Threaded Rod DIN975/976 M6-M39 CustomizeEurope, Malaysia, United Kingdom -UK, UAE

 

316 SS Threaded Rod Weight Chart
Per Tube Pieces
Sizes
Weight Per 100′
35
5/16-18
20.1
25
3/8-16
29.6
12
1/2-13
53.9
50
1/4-20
12.3
17
7/16-14
40.6
10
9/16-12
67.6
5
3/4-10
124.9
8
5/8-11
85.2
4
7/8-9
172.4
1
1 1/4-7
357.6
1
1 1/8-7
284.2
2
1-8
225.6
1
1 1/8-8
290.9
1
1 1/4-8
365.8
1
1 1/2-6
517.8
1
1 3/4-5
703.0
1
1 1/2-8
539.7
1
2″-4 1/2
922.0

 

Strength Class of A2-70 Threaded Rod
Strength Class
Min. Yield N/milimeter²
at Failure Elongation
Min. UTS N/milimeter²
Class 70
450.0
0.04D
700
Class 50
210.0
0.06D
500
Class 80
600.0
0.03D
800

 

We Stock and supply stainless steel acme threaded rod, Buy M4/M24/M6 SS Threaded Bar in your length and save cost.

 

Left Hand DIN 976-1 SS Threaded Rods
Diameter
L
Pitch
M3
1000
0.50
M4
1000
0.70
M5
1000
0.80
M6
1000
1.00
M7
1000
1.00
M8
1000
1.25
M10
1000
1.50
M12
1000
1.75
M14
1000
2.00
M16
1000
2.00
M18
1000
2.50
M20
1000
2.50
M22
1000
2.50
M24
1000
3.00

 

Thickness of Stainless Steel Threaded Bar
Designation Minimum Thickness, in.
300.0001
50.0002
80.0003
120.0005

 

Stockist of stainless steel rod threaded one end of Renowned manufacturers with Mill Test Certificate EN 10204/3.1B

 

Applications of M12 Threaded Rod
  • Power Generation
  • Sea Water Equipment
  • Heat Exchangers
  • Gas Processing
  • Aircraft Exhaust Manifolds
  • Petrochemicals

 

Common types of Stainless Steel Threaded Rod
  • Stainless Steel Left Hand Threaded Rod DIN 976-1
  • DIN 938 Stainless Steel Double End Threaded Studs
  • Stainless Steel Double End Studs DIN 939
  • ISO 13918 Stainless Steel Threaded Weld Studs

 

Right Hand 316 Stainless Steel Threaded Rods
Thread Direction
Measurement System
Length
Thread Type of Fastener
Right Hand
Inch
6 ft.
UNC (Coarse)
2 ft.
1 ft.
3 ft.
6 ft.
UNF (Fine)
2 ft..
3 ft.
1 ft.

 

Surface Finish of 8mm Stainless Steel Threaded Rod
  • Zinc and Chromate : Silvery and offers resistant to corrosion.
  • Hot Dipped Galvanized(HDG) : Offers superior resistant to corrosion due to the dipping of Threaded Rods in the molten zinc.
  • Zinc Plated : Coated with Zinc.
  • Plain Finish: No Coating.
  • Zinc and Yellow Chromate : Offers better resistant to corrosion.
Type Designation Typical Appearance
Blue-Bright B Transparent with a bluish tinge and slight iridescence
Clear A Transparent colorless with slight iridescence
Organic F Any of the above plus organic topcoat
Opaque D Olive green, shading to brown or bronze
Yellow C Yellow iridescent
Black E Black with slight iridescence

 

UNC Threaded Rod in SS
  • 3/8 X 3FT 304
  • 7/16 X 3FT 316
  • 1/2 UNC X 3FT 316
  • 1/4 X 3FT 304
  • 3/4 X 3FT 316
  • 5/16 X 3FT 304
  • 5/8 X 3FT 316
  • 1-1/4 X 3FT 316
  • 1/2UNC X 3FT 304
  • 1-1/2 X 3FT 316
  • 7/8 X 3FT 316
  • 3/16 X 3FT 316
  • 5/16UNC X 3FT 316
  • 1 X 3FT 316
  • 3/8 X 3FT 316
  • 1/4 X 3FT 316
  • 9/16 X 3FT 316

 

Zinc Plated Stainless Steel Threaded Rod Composition Chart
Designation Type
Fe/CdCadmium
Fe/Zn Zinc
Fe/Zn-NiZinc Nickel Alloy
Fe/Zn-Co Zinc Cobalt Alloy
Fe/Zn-FeZinc Iron Alloy

 

Dimensions Chart of Double Ended Stainless Steel Threaded Rod
M4 M5 M6 (M7) M8 (M18) M10 M12 (M14) M16 M20 (M22) M24 Stainless Steel Threaded Rod Thread
- - - - - - - M12 x 1, 5 - - - - -
- - - - M8 x 1 (M18 x 1, 5) M10 x 1, 25 M12 x 1, 25 (M14 x 1, 5) M16 x 1, 5 M20 x 1, 5 (M22 x 1, 5) M24 x 2
- - - - - 61 45 49 53 57 65 69 73 b2 l > 200milimeter
14 16 18 20 22 42 26 30 34 38 46 50 54 b2 l < 125milimeter
5 6, 5 7, 5 9 10 22 12 15 18 20 25 28 30 b1
20 22 24 26 28 48 32 36 40 44 52 56 60 b2 125 >l < 200milimeter
0, 9 1 1, 25 1, 25 1, 6 3, 2 1, 9 2, 2 2, 5 2, 5 3, 2 3, 2 3, 8 x 2
1, 75 2 2, 5 2, 5 3, 2 6, 3 3, 8 4, 3 5 5 6, 3 6, 3 7, 5 x 1
per 1000 units, in Weight (7, 85/dm3) l js 15
kilogram
14
12
16
2, 03 20
18
2, 23 3, 65 22
2, 52 4, 11 5, 85 25
2, 82 4, 57 6, 52 9, 49 28
3, 02 4, 88 6, 96 10, 1 13, 1 30
3, 51 5, 65 8, 07 11, 6 15, 1 24, 2 35
4, 01 6, 42 9, 18 13, 1 17 27, 2 41 40
7, 19 10, 2 14, 6 19 30, 3 45, 4 64 45
7, 96 11, 4 16, 1 21 33, 3 49, 9 70 94, 9 50
13, 6 19, 2 24, 9 140 39, 5 58, 8 82, 1 111 180 60
12, 5 17, 7 22, 9 130 36, 4 54, 3 76, 1 103 55
22, 2 28, 9 160 45, 7 67, 6 94, 2 126 205 257 305 70
20, 7 26, 9 150 42, 6 63, 2 88, 2 119 192 242 65
30, 8 170 48, 8 72, 1 100 134 217 272 323 75
190 54, 9 81 112 150 241 302 358 85
32, 8 180 51, 8 76, 5 106 142 229 287 341 80
199 58 85, 4 118 158 254 317 376 90
210 61, 1 89, 8 124 166 266 332 394 95
220 64, 2 94, 3 130 174 279 346 412 100
240 103 143 190 303 376 447 110
260 112 155 205 328 406 483 120
280 167 221 353 436 518 130
300 179 237 377 466 554 140
320 253 402 496 589 150
340 269 427 525 625 160
360 451 555 660 170
380 476 585 696 180
501 615 731 190
525 645 767 200

 

Thread d (M27) M30 (M52) M36 (M39) M42 (M33) (M45) M48
(M27 x 2) M30 x 2 (M52 x 3) M36 x 3 (M39 x 3) M42 x 3 (M33 x 2) (M45 x 3) M48 x 3
b2 l < 125milimeter 60 66 110 78 84 90 72 96 102
b1 35 38 65 45 50 52 42 58 60
b2 125 > l < 200milimeter 66 72 116 84 90 96 78 102 108
l js 15 per 1000 units , in Weight (7 , 85/dm3)
x 1 7 , 5 9 12 , 5 10 10 11 9 11 12 , 5
b2 l >200milimeter 79 85 129 97 103 109 91 115 121
x 2 3 , 8 4 , 5 6 , 3 5 5 5 , 5 4 , 5 5 , 5 6 , 3
kilogram
50
55
60
70
75 430
80 452
85 475 591
90 497 619 776
95 520 646 810
100 542 674 1011 843
110 587 730 1091 1326 910
120 632 785 1171 1420 1647 977 1963
130 677 841 1251 1514 1756 1045 2088 2364
140 722 896 3027 1331 1607 1865 1112 2213 2506
150 767 952 3794 1411 1701 1973 1179 2338 2648
160 812 1007 3360 1490 1795 2082 1246 2462 2790
170 857 1062 3527 1570 1889 2191 1313 2587 2932
180 902 1118 3694 1650 1982 2300 1380 2712 3074
190 947 1173 3861 1730 2076 2408 1447 2837 3216
200 992 1229 4027 1810 2170 2517 1515 2962 3358
220 1082 1340 4361 1970 2358 2735 1649 3211 3642
240 1172 1450 4694 2130 2545 2952 1784 3461 3927
260 1262 1562 5028 2289 2733 3170 1918 3711 4211
280 1352 1672 5361 2449 2920 3387 2052 3961 4495
300 1784 5694 2609 3108 3605 2186 4210 4779
320 6028 2769 3295 3822 2321 4460 5063
340 6361 2929 3483 4040 2455 4710 5347
360 6695 3088 3670 4257 4959 5631
380 7028 3858 4475 5209 5915
400 7362 4045 4692 5459 6199

 

Double Ended Stainless Steel Threaded Rod Size Chart
1/2″ to 13 x 3″ 5/16″ to 18 x 1″ 1/2″ to 13 x 2 to 1/2″
3/8″ to 16 x 1″ 3/8″ to 16 x 3/4″ 5/8″ to 11 x 3″
5/8″ to 11 x 2 to 1/2″ 3/8″ to 16 x 3″ 3/8″ to 16 x 2 to 1/2″
1/4″ to 20 x 1″ 5/8″ to 11 x 4″ 3/8″ to 16 x 2″
1/2″ to 13 x 1 to 1/2″ 5/16″ to 18 x 1 to 1/4″ 1/2″ to 13 x 2″
3/8″ to 16 x 1 to 1/2″ 3/4″ to 10 x 3″ 3/8″ to 16 x 1 to 1/4″
1/2″ to 13 x 1 to 1/4″

 

Size Chart of Stainless Steel All Thread
per metre Weight
Thread
Strength
70 Class
80 Class
UTS
0.02%
UTS
0.02%
Kilogram/meter
kN kN
0.072
M12
64.00
41.00
73.00
54.00
1.031
M16
109.09
70.07
125.06
94.02
2.005
M20
171.05
110.03
196.00
147.00
2.096
M24
247.01
158.09
282.04
211.08
3.083
M27
321.03
206.06
367.02
275.04
4.070
M30
392.07
252.06
448.08
336.06
5.078
M33
485.08
312.03
555.02
416.04
6.084
M36
571.09
367.07
653.06
490.02
8.014
M39
683.02
439.02
780.08
585.06
9.038
M42
784.07
504.05
896.06
672.06
10.090
M45
914.02
587.07
1044.08
783.06
12.032
M48
1031.01
662.09
1178.04
883.08
14.065
M52
1230.06
791.01
1406.04
1054.08

 

SS Unified Threaded Rod Specifications
Stock Lengths

6 foot
3 foot
12 foot
Size Range
.0250" up to and including 15.00" Dia
Materials
Stainless Steels
Alloy Steels
Carbon Steels
Alloy Heat Treated Steels


Exotic Metals
Brass
Aluminum
Titanium
Thread Start

Multiple
Single
Thread Profiles

UNF
UNC
UNEF

8 and 12 Pitch Series
UNJ
Special Order
Custom lengths up to 50 Ft. Double End, Full Thread and Single End Parts
Thread Direction

Left Hand
Right Hand
Stainless Steel Threaded Rod Class Fit
3A
Modified
1A
2A

 

Advantages of A2 Stainless Steel Threaded Rod
  • Large stocks
  • Full strength accessories, couplers, nuts available
  • Unique corrosive resistant product
  • Superior ductility for seismic activity
  • thread rolled High strength stainless steel bars

 

Stainless Steel Threaded Rod M10 Features
  • It may use with most standard size fasteners.
  • Used in repairs and to secure parts together.
  • Plumbing and Electrical purposes.
  • automotive, Construction and manufacturing industries.

 

Test Certificates provided with Double End A2-70 Threaded Rod
  • as per EN 10204 / 3.1BManufacturer Test Certificate
  • 100% Radiography Test Report and Raw Materials Certificate
  • Report of Third Party Inspection

 

M5 threaded rod Ready Stock
  • M5 Threaded Rod
  • Stainless Threaded Rod
  • Steel Threaded Rod
  • Stainless Steel All Thread
  • Stainless Steel Threaded Bar
  • Ss Threaded Rod
  • M12 Stainless Steel Threaded Rod
  • M10 Stainless Steel Threaded Rod
  • 316 Stainless Steel Threaded Rod
  • Stainless Steel All Thread Rod
  • M8 Stainless Steel Threaded Rod
  • 10mm Stainless Steel Threaded Rod
  • M24 Stainless Steel Threaded Bar
  • 12mm Stainless Steel Threaded Rod
  • Stainless Steel Acme Threaded Rod
  • Stainless Steel Rod With Threaded Ends
  • Steel Threaded Bar
  • 316 Threaded Rod
  • 316 Stainless Threaded Rod
  • SS All Thread Rod
  • 304 Stainless Steel Threaded Rod
  • Stainless Studding
  • 316 Ss Threaded Rod
  • Stainless Acme Threaded Rod
  • Steel All Thread