Table of Content
The High Tensile Hex Bolts, with their hexagonal shape, make it easy for the fastener to turn. It is done by reducing the required turning distance. The bolt and nut can be easily tightened by turning it and that is because of its shape. It has a turning radius of just 30 degrees for reaching the next flat parallel.
The a2 70 Stainless Steel Hex Bolts and Nuts are more economical than the a4 70 products. The a4 grade is a marine grade as it can effectively resist seawater and brine solutions. Even though grade a2 is more popular, grade a4 has higher mechanical strength and it resists corrosion better, even at elevated temperatures.
The Stainless Steel Heavy Hex Bolts are designed to be used in a wide range of high temperature applications. They can also be found in high strength industrial applications, especially in general construction and steel fabrication industries. They come with a thicker head than the regular hexagonal headed bolts.
The mechanical and corrosion resisting properties of 316 grade Stainless Steel Hex Head Shoulder Bolts are better than the 304 grade. However, 316 ss is more expensive than 304 ss. It is because of the increased nickel and the added molybdenum content in its chemical composition. But as the 316 type shows better performance, it is considered to be more cost effective than the 304 type.
The top 3 reasons for buying Stainless steel hex cap screw and other products from manufacturers are:
The Stainless Steel Hex Head Bolts can be defined as a type of machined bolt which is used with a nut or inside a tapered hole. These bolt fasteners come with six (hexagon) sided heads and they have externally threaded bodies. The benefits of these bolts are that, they enable easy wrenching while enough torque is put to the bolting joint. They are mostly used in tight spaces for securing a wide range of materials.
standard | ISO 4032, ISO 7380, ISO 4017, JIS standards, ISO 4033 |
---|---|
British standards | BS 57 |
Bolt Size |
M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes |
Length | 3 mm to 200 mm |
Bolt Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Bolt Standard: |
DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards, ANSI – American National Standards Institute |
DIN Standard | B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985 |
UTS – Unified Thread Standard | UNC, UNF, UNEF, UNS, NPT, NPTF |
Bolt Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Type | Pan/ Round/ Oval/ Hex Head/ Truss head |
Bolt Head | Pan head, flat head, oval head, hex head, phillips head |
Bolt Production process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing |
Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc. |
MOQ | 5 pieces |
Bolt Test Certificate: |
|
Bolt Free Samples | Yes |
Description | Price |
ASTM A325m Heavy Hex Structural Bolts Stainless Steel | US $ 0.23-23 / Ton |
Hexagon Bolt 304 Stainless Steel DIN933, Full Thread Bolts | US $ 0.01 / Piece |
Stainless Steel A2-70 A4-80 Hexagon Head Full Threaded Bolts | US $ 0.0012-0.265 / Piece |
Stainless Steel Hex Bolt A4-80 DIN933 | US $ 0.01-0.1 / Piece |
M20 M22 Grade 8.8 10.9 Stainless Steel DIN931 DIN933 Hexagon Hex Head Bolt | US $ 0.01-0.2 / Piece |
Stainless Steel A2-70/A4-80 304/316 Half Thread Hex Bolt DIN931 | US $ 0.01 / Piece |
Stainless Steel A2 A4 316L Hex Bolt with Hex Nut | US $ 0.01-50 / Piece |
Super Stainless Steel 904L 1.4539 Hex Head Bolt | US $ 7.3-10 / Piece |
Stainless Steel Torque Specifications | |||||||
---|---|---|---|---|---|---|---|
Bolt Size, Inches or # | Threads, Per Inch | Standard Dry Torque in Inch-Pounds | |||||
304, Stainless Steel | 316, Stainless Steel | ||||||
#2 | 56 | 2.5 | 2.6 | ||||
64 | 3.0 | 3.2 | |||||
#3 | 48 | 3.9 | 4.0 | ||||
56 | 4.4 | 4.6 | |||||
#4 | 40 | 5.2 | 5.5 | ||||
48 | 6.6 | 6.9 | |||||
#5 | 40 | 7.7 | 8.1 | ||||
44 | 9.4 | 9.8 | |||||
#6 | 32 | 9.6 | 10.1 | ||||
40 | 12.1 | 12.7 | |||||
#8 | 32 | 19.8 | 20.7 | ||||
36 | 22.0 | 23.0 | |||||
#10 | 24 | 22.8 | 23.8 | ||||
32 | 31.7 | 33.1 | |||||
Bolt Size, Inches or # | Threads, Per Inch | Standard Dry Torque in Inch-Pounds | |||||
304, Stainless Steel | 316, Stainless Steel | ||||||
1/4 | 20 | 75.2 | 78.8 | ||||
28 | 94.0 | 99.0 | |||||
5/16 | 18 | 132 | 138 | ||||
24 | 142 | 147 | |||||
3/8 | 16 | 236 | 247 | ||||
24 | 259 | 271 | |||||
7/16 | 14 | 376 | 393 | ||||
20 | 400 | 418 | |||||
1/2 | 13 | 517 | 542 | ||||
20 | 541 | 565 | |||||
Bolt Size, Inches or # | Threads, Per Inch | Standard Dry Torque in Inch-Pounds | |||||
304, Stainless Steel | 316, Stainless Steel | ||||||
9/16 | 12 | 682 | 713 | ||||
18 | 752 | 787 | |||||
5/8 | 11 | 1110 | 1160 | ||||
18 | 1244 | 1301 | |||||
3/4 | 10 | 1530 | 1582 | ||||
16 | 1490 | 1558 | |||||
7/8 | 9 | 2328 | 2430 | ||||
14 | 2318 | 2420 | |||||
1 | 8 | 3440 | 3595 | ||||
14 | 3110 | 3250 | |||||
Bolt Size, Inches or # | Threads, Per Inch | Standard Dry Torque in Foot-Pounds | |||||
304, Stainless Steel | 316, Stainless Steel | ||||||
1 1/8 | 7 | 413 | 432 | ||||
12 | 390 | 408 | |||||
1 1/4 | 7 | 523 | 546 | ||||
12 | 480 | 504 | |||||
1 1/2 | 6 | 888 | 930 | ||||
12 | 703 | 732 |
Nom Bolt Size, (in) | Grade | |||
---|---|---|---|---|
2 | 5 | 8 | Lamalloy | |
Proof Load | ||||
1/4 | 1750 | 2700 | 3800 | 4600 |
5/16 | 2900 | 4450 | 6300 | 7600 |
3/8 | 4250 | 6600 | 9300 | 11250 |
7/16 | 5850 | 9050 | 12800 | 15400 |
1/2 | 7800 | 12100 | 17000 | 20600 |
9/16 | 10000 | 15500 | 21800 | 26400 |
5/8 | 12400 | 19200 | 27100 | 32750 |
3/4 | 15200 | 28400 | 40100 | 48500 |
7/8 | 18400 | 39300 | 55400 | 67000 |
1 | 20000 | 51500 | 72700 | 87900 |
1 1/8 | 25200 | 56500 | 91600 | 110700 |
1 1/4 | 32000 | 71700 | 116300 | 140500 |
1 3/8 | 38100 | 85500 | 138600 | 167500 |
1 1/2 | 46400 | 104000 | 168600 | 203700 |
Stainless Steel Bolt Size | B | C | D | E, Radius of Fillet | A | F, Thread Length | G, Transitional, Thread Length | Runout of, Bearing Surface, FIM | ||
---|---|---|---|---|---|---|---|---|---|---|
minimum | maximum | minimum | maximum | minimum | maximum | |||||
1/2" | 7/8 | 0.0969 | 5/16 | 0.0031 | 0.0009 | 0.0515 | 0.0482 | 1.000 | 0.019 | 0.0016 |
5/8" | 1-1/16 | 1.0175 | 25/64 | 0.0062 | 0.0021 | 0.0642 | 0.0605 | 1.025 | 0.022 | 0.0019 |
3/4" | 1-1/4 | 1.0383 | 15/32 | 0.0062 | 0.0021 | 0.0768 | 0.0729 | 1.038 | 0.025 | 0.0022 |
7/8" | 1-7/16 | 1.0589 | 35/64 | 0.0062 | 0.0031 | 0.0895 | 0.0852 | 1.050 | 0.028 | 0.0025 |
1" | 1-5/8 | 1.0796 | 39/64 | 0.0093 | 0.0062 | 1.0022 | 0.0976 | 1.075 | 0.031 | 0.0028 |
1-1/8" | 1-13/16 | 2.0002 | 11/16 | 0.0093 | 0.0062 | 1.0149 | 1.0098 | 2.000 | 0.034 | 0.0032 |
1-1/4" | 2 | 2.0209 | 25/32 | 0.0093 | 0.0062 | 1.0277 | 1.0223 | 2.000 | 0.038 | 0.0035 |
1-3/8" | 2-3/16 | 2.0416 | 27/32 | 0.0093 | 0.0062 | 1.0404 | 1.0345 | 2.025 | 0.044 | 0.0038 |
1-1/2" | 2-3/8 | 2.0622 | 15/16 | 0.0093 | 0.0062 | 1.0531 | 1.0470 | 2.025 | 0.044 | 0.0041 |
Dia | M16 | M12 | M36 | M24 | M22 | M30 | M20 | M27 |
---|---|---|---|---|---|---|---|---|
Length | ||||||||
30 | 49.01 | |||||||
35 | 53.06 | |||||||
40 | 105 | 58.00 | ||||||
45 | 113 | 62.01 | 188 | |||||
50 | 121 | 66.06 | 257 | 200 | ||||
55 | 129 | 71.00 | 272 | 212 | ||||
60 | 137 | 75.04 | 362 | 286 | 225 | |||
65 | 145 | 79.09 | 380 | 301 | 237 | |||
70 | 153 | 84.03 | 398 | 316 | 249 | 532 | ||
75 | 160 | 88.08 | 415 | 331 | 701 | 262 | 554 | |
80 | 168 | 93.02 | 433 | 346 | 728 | 274 | 576 | |
85 | 176 | 97.06 | 1184 | 451 | 361 | 756 | 286 | 599 |
90 | 184 | 102 | 1224 | 467 | 375 | 784 | 298 | 621 |
95 | 192 | 107 | 1264 | 485 | 390 | 812 | 310 | 644 |
100 | 199 | 1304 | 503 | 405 | 838 | 322 | 665 | |
105 | 207 | 1336 | 520 | 420 | 865 | 335 | 688 | |
110 | 215 | 1376 | 538 | 435 | 893 | 347 | 710 | |
115 | 223 | 1415 | 556 | 450 | 921 | 359 | 732 | |
120 | 231 | 1455 | 574 | 465 | 949 | 372 | 755 | |
125 | 239 | 1495 | 591 | 479 | 976 | 384 | 777 | |
130 | 247 | 1535 | 609 | 494 | 1004 | 396 | 800 | |
135 | 1575 | 627 | 509 | 1032 | 409 | 822 | ||
140 | 1615 | 645 | 524 | 1059 | 421 | 845 | ||
145 | 1655 | 662 | 539 | 1087 | 433 | 867 | ||
150 | 1695 | 680 | 554 | 1115 | 446 | 890 | ||
155 | 1735 | 698 | 569 | 1143 | 458 | 912 | ||
160 | 1775 | 716 | 584 | 1170 | 935 | |||
165 | 1815 | 733 | 599 | 1198 | 957 | |||
170 | 1855 | 751 | 1226 | 979 | ||||
175 | 1895 | 769 | 1254 | 1002 | ||||
180 | 1935 | 787 | 1281 | 1024 | ||||
185 | 1974 | 804 | 1309 | 1047 | ||||
190 | 2014 | 822 | 1337 | 1069 | ||||
195 | 2054 | 840 | 1365 | 1092 | ||||
200 | 2094 | 1392 | 1114 |
SS Hex Bolts Size | E | D | F Thread Length for Bolts Length | B | A (max) | C (min) | ||
---|---|---|---|---|---|---|---|---|
max | min | 6" and shorter | over 6" | |||||
5/16" | 0.003 | 0.001 | 7/32 | 0.0875 | 1.0125 | 1/2 | 0.0324 | 0.0552 |
1/4" | 0.003 | 0.001 | 11/64 | 0.0750 | 1.0000 | 7/16 | 0.0260 | 0.0484 |
7/16" | 0.003 | 0.001 | 19/64 | 1.0125 | 1.0375 | 5/8 | 0.0452 | 0.0687 |
3/8" | 0.003 | 0.001 | 1/4 | 1.0000 | 1.0250 | 9/16 | 0.0388 | 0.0620 |
5/8" | 0.006 | 0.002 | 27/64 | 1.0500 | 1.0750 | 15/16 | 0.0642 | 1.0033 |
3/4" | 0.006 | 0.002 | 1/2 | 1.0750 | 2.0000 | 1-1/8 | 0.0768 | 1.0240 |
1/2" | 0.003 | 0.001 | 11/32 | 1.0250 | 1.0500 | 3/4 | 0.0515 | 0.0826 |
7/8" | 0.006 | 0.002 | 37/64 | 2.0000 | 2.0250 | 1-5/16 | 0.0895 | 1.0447 |
1-1/8" | 0.009 | 0.003 | 3/4 | 2.0500 | 2.0750 | 1-11/16 | 1.0149 | 1.0859 |
1" | 0.009 | 0.003 | 43/64 | 2.0250 | 2.0500 | 1-1/2 | 1.0022 | 1.0653 |
1-1/4" | 0.009 | 0.003 | 27/32 | 2.0750 | 3.0000 | 1-7/8 | 1.0277 | 2.0066 |
1-1/2" | 0.009 | 0.003 | 1 | 3.0250 | 3.0500 | 2-1/4 | 1.0531 | 2.0480 |
1-3/8" | 0.009 | 0.003 | 29/32 | 3.0000 | 3.0250 | 2-1/16 | 1.0404 | 2.0273 |
1-3/4" | 0.012 | 0.004 | 1-5/32 | 3.0750 | 4.0000 | 2-5/8 | 1.0785 | 2.0893 |
2" | 0.012 | 0.004 | 1-11/32 | 4.0250 | 4.0500 | 3 | 2.0039 | 3.0306 |
2-1/4" | 0.019 | 0.006 | 1-1/2 | 4.0750 | 5.0000 | 3-3/8 | 2.0305 | 3.0719 |
4" | 0.019 | 0.006 | 2-11/16 | 8.0250 | 8.0500 | 6 | 4.0111 | 6.0612 |
2-3/4" | 0.019 | 0.006 | 1-13/16 | 5.0750 | 6.0000 | 4-1/8 | 2.0837 | 4.0546 |
3" | 0.019 | 0.006 | 2 | 6.0250 | 6.0500 | 4-1/2 | 3.0081 | 4.0959 |
3-1/4" | 0.019 | 0.006 | 2-3/16 | 6.0750 | 7.0000 | 4-7/8 | 3.0335 | 5.0372 |
2-1/2" | 0.019 | 0.006 | 1-21/32 | 5.0250 | 5.0500 | 3-3/4 | 2.0559 | 4.0133 |
3-1/2" | 0.019 | 0.006 | 2-5/16 | 7.0250 | 7.0500 | 5-1/4 | 3.0589 | 5.0786 |
3-3/4" | 0.019 | 0.006 | 2-1/2 | 7.0750 | 8.0000 | 5-5/8 | 3.0858 | 6.0198 |
Stainless Steel Hex Cap Screw | Stainless Steel Hex Tap Bolts |
18-8 Stainless Steel Hex Bolts | 410 Stainless Steel Hex Bolts |
304 Stainless Steel Hex Bolts | 304L Stainless Steel Hex Bolts |
304H Stainless Steel Hex Bolts | 310 Stainless Steel Hex Bolts |
316 Stainless Steel Hex Bolts | 316H Stainless Steel Hex Bolts |
316L Stainless Steel Hex Bolts | 317 Stainless Steel Hex Bolts |
317L Stainless Steel Hex Bolts | 321 Stainless Steel Hex Bolts |
347 Stainless Steel Hex Bolts | 904L Stainless Steel Hex Bolts |
18-8 Stainless Steel Hex Bolts | 8.8 Hex Bolts |
4.8 Hex Bolts | A2 Hex Bolts |
A4 Hex Bolts | A2-70 Hex Bolts |
A4-70 Hex Bolts | A4-80 Hex Bolts |
A193 B6 (410) Hex Bolts | A193 B8C (347) Hex Bolts |
A193 B8T (321) Hex Bolts | Duplex 2205 Hex Bolts |
17-4 PH Hex Bolts | 316 Stainless Hex Bolts |
Bolts Size | B | A | D | C | Runout of Bearing Surface FIM | F Thread Length | E Radius of Fillet | G Transitional Thread Length | ||
---|---|---|---|---|---|---|---|---|---|---|
max | min | min | max | min | max | |||||
1/2" | 7/8 | 0.0515 | 0.0482 | 5/16 | 0.0969 | 0.0016 | 1.000 | 0.0031 | 0.0009 | 0.019 |
5/8" | 1-1/16 | 0.0642 | 0.0605 | 25/64 | 1.0175 | 0.0019 | 1.025 | 0.0062 | 0.0021 | 0.022 |
3/4" | 1-1/4 | 0.0768 | 0.0729 | 15/32 | 1.0383 | 0.0022 | 1.038 | 0.0062 | 0.0021 | 0.025 |
7/8" | 1-7/16 | 0.0895 | 0.0852 | 35/64 | 1.0589 | 0.0025 | 1.050 | 0.0062 | 0.0031 | 0.028 |
1" | 1-5/8 | 1.0022 | 0.0976 | 39/64 | 1.0796 | 0.0028 | 1.075 | 0.0093 | 0.0062 | 0.031 |
1-1/8" | 1-13/16 | 1.0149 | 1.0098 | 11/16 | 2.0002 | 0.0032 | 2.000 | 0.0093 | 0.0062 | 0.034 |
1-1/4" | 2 | 1.0277 | 1.0223 | 25/32 | 2.0209 | 0.0035 | 2.000 | 0.0093 | 0.0062 | 0.038 |
1-3/8" | 2-3/16 | 1.0404 | 1.0345 | 27/32 | 2.0416 | 0.0038 | 2.025 | 0.0093 | 0.0062 | 0.044 |
1-1/2" | 2-3/8 | 1.0531 | 1.0470 | 15/16 | 2.0622 | 0.0041 | 2.025 | 0.0093 | 0.0062 | 0.044 |
|
|
D1D1 | E | K | S |
---|---|---|---|
M3 | 6.01 | 2 | 5.5 |
M4 | 7.66 | 2.8 | 7 |
M5 | 8.79 | 3.5 | 8 |
M6 | 11.05 | 4 | 10 |
M8 | 14.38 | 5.3 | 13 |
M10 | 18.9 | 6.4 | 17 |
M12 | 21.1 | 7.5 | 19 |
M14 | 24.49 | 8.8 | 22 |
M16 | 26.75 | 10 | 24 |
M18 | 30.14 | 11.5 | 27 |
M20 | 33.53 | 12.5 | 30 |
M22 | 35.72 | 14 | 32 |
M24 | 39.98 | 15 | 36 |
M27 | 45.2 | 17 | 41 |
M30 | 50.85 | 18.7 | 46 |
M33 | 55.37 | 21 | 50 |
M36 | 60.79 | 22.5 | 55 |
M42 | 71.3 | 26 | 65 |
M48 | 82.6 | 30 | 75 |
Stainless Steel Hex Bolt Coating's | |||||
Hot Dipped Galvanizing | Passivation | Oxidized | Epoxy Coating | Zinc Plating | |
Electro Polished | Teflon Coating | Chrome Plating | Mirror Buffed |
D1D1 | E | K | S |
---|---|---|---|
M3 | 6.001 | 2 | 5.05 |
M4 | 7.066 | 2.08 | 7 |
M5 | 8.079 | 3.05 | 8 |
M6 | 11.005 | 4 | 10 |
M8 | 14.038 | 5.03 | 13 |
M10 | 18.09 | 6.04 | 16 |
M12 | 21.01 | 7.05 | 18 |
M14 | 24.049 | 8.08 | 21 |
M16 | 26.075 | 10 | 24 |
M18 | 30.014 | 11.05 | 27 |
M20 | 33.053 | 12.05 | 30 |
M22 | 35.072 | 14 | 34 |
39.098 | 15 | 36 | |
M27 | 45.02 | 17 | 41 |
M30 | 50.085 | 18.07 | 46 |
M33 | 55.037 | 21 | 50 |
M36 | 60.079 | 22.05 | 55 |
M42 | 71.03 | 26 | 65 |
M48 | 82.06 | 30 | 75 |
|
|
Grade | Si | Ti | C | P | Ni | Cr | Mn | Mo | S | N | Fe | |
304 seamless | minimum | 8.000 | 18.000 | |||||||||
maximum | 0.0075 | 0.0008 | 0.00045 | 10.005 | 20.000 | 2.000 | 0.00030 | 0.0010 | ||||
304L | minimum | 8.000 | 18.000 | |||||||||
maximum | 0.0075 | 0.00030 | 0.00045 | 12.000 | 20.000 | 2.000 | 0.00030 | 0.0010 | ||||
304H seamless | minimum | 0.0004 | 8.000 | 18.000 | ||||||||
maximum | 0.0075 | 0.00010 | 0.00045 | 10.005 | 20.000 | 2.000 | 0.00030 | |||||
SS 310 | 0.00015 max | 0.00015 max | 0.00020 max | 19.0000 21.0000 | 24.0000 26.0000 | 2 max | 0.0010 max | 0.00015 max | 54.007 minimum | |||
SS 310S | 1.0000 max | 0.0008 max | 0.00045 max | 19.0000 21.0000 | 24.0000 26.0000 | 2 max | 0.0075 max | 0.00030 max | 53.00095 minimum | |||
SS 310H | 1.0000 max | 0.0004 0.0010 | 0.00045 max | 19.0000 21.0000 | 24.0000 26.0000 | 2 max | 0.00030 max | 53.00885 minimum | ||||
316 seamless | minimum | 10.000 | 16.000 | 2.0003.000 | ||||||||
maximum | 0.0075 | 0.00035 | 0.00045 | 14.000 | 18.000 | 2.000 | 0.00030 | |||||
316L | minimum | 10.000 | 16.000 | 2.0003.000 | ||||||||
maximum | 0.0075 | 0.00035 | 0.00045 | 14.000 | 18.000 | 2.000 | 0.00030 | |||||
316TI | 2.000 max | 0.0008 max | 0.00045 max | 2.0000 3.0000 | 16.0000 18.0000 | 10.0000 14.0000 | 0.0075 max | 0.00030 max | ||||
317 | 1 max | 0.0008 max | 0.00045 max | 18.0000 20.0000 | 2 max | 3.0000 4.0000 | 0.00030 max | 57.00845 minimum | ||||
SS 317L | 1.000 max | 0.00035 max | 0.00045 max | 11.0000 15.0000 | 18.0000 20.0000 | 2.000 max | 3.0000 4.0000 | 0.00030 max | 57.0089 minimum | |||
SS 321 seamless | 1.000 max | 5(C+N) 0.0070 max | 0.0008 max | 0.00045 max | 9.0000 12.0000 | 17.0000 19.0000 | 2.000 max | 0.00030 max | 0.0010 max | |||
SS 321H | 1.000 max | 4(C+N) 0.0070 max | 0.0004 0.0010 | 0.00045 max | 9.0000 12.0000 | 17.0000 19.0000 | 2.000 max | 0.00030 max | 0.0010 max | |||
347/ 347H | 1.000 max | 0.0008 max | 0.00045 max | 9.000013.0000 | 17.0000 20.0000 | 2.000 max | 0.00030 max | |||||
410 | minimum | 11.005 | ||||||||||
maximum | 1.0000 | 0.0015 | 0.00040 | 0.0075 | 13.005 | 1.000 | 0.00030 | |||||
446 seamless | minimum | 23.000 | 0.0010 | |||||||||
maximum | 0.0075 | 0.002 | 0.00040 | 0.0050 | 30.000 | 1.005 | 0.00030 | 0.0025 | ||||
904L seamless | minimum | 23.0000 | 19.000 | 4.0000 | 0.0010 | |||||||
maximum | 1.0000 | 0.0020 | 0.00045 | 28.0000 | 23.000 | 2.0000 | 5.0000 | 0.00035 | 0.0025 |
Material | Temperure | Heat | Elongation %, Min | Yield Strength | Tensile Strength |
Min. | Treatment | Ksi (MPa), Min. | Ksi (MPa), Min. | ||
º F(º C) | |||||
TP316L seamless | 1900(1040) | Solution | 35 | 25(170) | 70(485) |
TP304L seamless | 1900 (1040) | Solution | 35 | 25(170) | 70(485) |
TP304 seamless | 1900 (1040) | Solution | 35 | 30(205) | 75(515) |
TP316 seamless | 1900(1040) | Solution | 35 | 30(205) | 75(515) |
Stainless Steel Round Bar Standard | UNS | AFNOR | EN | WERKSTOFF NR. | GOST | JIS | BS |
SS 304L | S30403 | Z3CN18‐10 | X2CrNi18-9 / X2CrNi19-11 | 1.4306 / 1.4307 | 03Х18Н11 | SUS 304L | 3304S11 |
SS 310 | S31000 | – | X15CrNi25-20 | 1.4841 | 20Ch25N20S2 | SUS 310 | 310S24 |
SS 304H | S30409 | – | – | 1.4301 | – | – | – |
SS 304 | S30400 | Z7CN18‐09 | X5CrNi18-10 | 1.4301 | 08Х18Н10 | SUS 304 | 304S31 |
Stainless Steel 310S | S31008 | – | X8CrNi25-21 | 1.4845 | 20Ch23N18 | SUS 310S | 310S16 |
SS 310H | S31009 | – | – | – | – | – | – |
SS 316L | S31603 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 | 1.4404 / 1.4435 | 03Ch17N14M3 / 03Ch17N14M2 | SUS 316L | 316S11 / 316S13 |
Stainless Steel 316H | S31609 | – | – | 1.4401 | – | – | – |
SS 316 | S31600 | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 | 1.4401 / 1.4436 | – | SUS 316 | 316S31 / 316S33 |
SS 316Ti | S31635 | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 | 1.4571 | 08Ch17N13M2T | SUS 316Ti | 320S31 |
SS 317 | S31700 | – | – | 1.4449 | – | SUS 317 | – |
Stainless Steel 321 | S32100 | – | X6CrNiTi18-10 | 1.4541 | – | SUS 321 | – |
SS 317L | S31703 | – | X2CrNiMo18-15-4 | 1.4438 | – | SUS 317L | – |
SS 321H | S32109 | – | X12CrNiTi18-9 | 1.4878 | – | SUS 321H | – |
Stainless Steel 347H | S34709 | – | X6CrNiNb18-12 | 1.4961 | – | SUS 347H | – |
SS 347 | S34700 | – | X6CrNiNb18-10 | 1.4550 | 08Ch18N12B | SUS 347 | – |
Stainless Steel 904L | N08904 | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 | 1.4539 | STS 317J5L | SUS 904L | 904S13 |