Stainless Steel Hanger Bolts is a headless bolts with a wood or lag screw threads at one end while machine thread at another end. stainless hanger bolts are mostly used for wood to metal bolting purpose. It is also known as headless hanger bolts or hanger screws. It can require a nut or can be fastened into a machined tapped hole.
Coupling nuts and threaded rod are often used with M8 Hanger Bolt to put up junction/pull boxes, electrical channels, fixtures and sheet metal. The furniture industry uses them with tee nuts, corner brackets, clinch nut plates, and whenever machine screw and wood threads are needed in a single fastener. M10 Hanger Bolts are also known as M10 couch bolts, M10 headless hanger bolts, M10 hanger screws.
M6 Hanger Bolt require predrilled, full-depth pilot holes to ensure maximum withdrawal resistance, whole size is based on bolt size and wood density. U Bolt Hanger is a bolt in the letter shape of U with screw threads on both the ends. It is primarily been used to support pipework, pipes through which gasses and water pass. It would be described by the size of pipe it was supporting. It also used to hold ropes together. Long Hanger Boltsfasten two components and are not visible on the workpiece. It has a wood screw on one end and a machine screw or bolt on the other end. Hanger Bolts For Wood may also be called coach screw rods.6 Inch Hanger Bolt are designed for insertion into a pre-drilled hole and are ideal for overhead application, usually in a wall or ceiling
standard | ISO 10642 |
---|---|
British standards | BS 57 |
Stainless Steel Hanger Bolts Size |
M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes |
Length | 3 mm to 200 mm |
Stainless Steel Hanger Bolts Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: |
DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards, ANSI – American National Standards Institute |
DIN Standard | B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985 |
UTS – Unified Thread Standard | UNC, UNF, UNEF, UNS, NPT, NPTF |
Stainless Steel Hanger Bolts Dimensions | ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded. |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Type | Pan/ Round/ Oval/ Hex Head/ Truss head |
Head | Pan head, flat head, oval head, hex head, phillips head |
Stainless Steel Hanger Bolts Finish | Per ASTM A380/A380M |
Production process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing |
Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc. |
MOQ | 5 pieces |
Stainless Steel Hanger Bolts Test Certificate: |
|
Free Samples | Yes |
Stainless Steel Hanger Bolts Delivery time | Regular product is about 7-15 days, custom product will according to special requirement |
Payment Terms | T/T, Paypal, Western Union, L/C or Trade Assurance 30% deposit & balance before shipping |
ASME B18.2.1 | 3/8 inch to 3 inch |
BS 1769 | ½ inch to 2 inch |
ASME B18.2.3.6M | M12 to M36 |
ASME B18.2.3.7M | M16 to M36 |
DIN 6914 | M12 to M36 |
ISO 7412 | M12 to M36 |
UNI 5712 | M12 to M36 |
DIN-EN 14399-4 | M12 to M36 |
Stainless Steel Hanger Bolts Length | Finish | Pkg Qty | Price |
---|---|---|---|
4" | Plain | CS | 1222.00 |
2-1/2" | Plain | CS | 811.00 |
3" | Plain | CS | 947.00 |
4" | Plain | EA | 4.75 |
2" | Plain | CS | 676.00 |
3-1/2" | Plain | EA | 3.44 |
2-1/2" | Plain | EA | 2.82 |
3" | Plain | EA | 6.15 |
2" | Plain | EA | 6.22 |
Stainless Steel Hanger Bolts Sizes |
|||
Sizes | size chart | size guide | dimensions |
3/8-16 x 1 Grade 5 Finish | 1/2-13 x 1-1/2 Grade 5 Finish | 1/4-20 x 1 Grade 5 Finish | |
3/8-16 x 1-1/4 Grade 5 Finish | 3/8-16 x 1-1/2 Grade 5 Finish | 1/4-20 x 3/4 Grade 5 Finish | |
1/2-13 x 2 Grade 8 Yellow Finish | 1/2-13 x 2 Grade 5 Finish | 1/2-13 x 1-1/2 Grade 8 Yellow Finish | |
5/8-11 x 2 Grade 8 Yellow Finish | 1/4-20 x 3/4 Grade 18-8 Stainless Steel | 5/16-18 x 1 Grade 5 Finish | |
3/8-16 x 1 Grade 8 Yellow Finish | 3/8-16 x 1 Grade 18-8 Stainless Steel | 3/8-16 x 1-1/2 Grade 8 Yellow Finish | |
1/4-20 x 1 Grade 18-8 Stainless Steel | 5/8-11 x 2 Grade 5 Finish | 5/8-11 x 2-1/2 Grade 8 Yellow Finish | |
3/8-16 x 2 Grade 5 Finish | 3/8-16 x 1-1/4 Grade 8 Yellow Finish |
Stainless Steel Hanger Bolts Pilot Hole Sizes | ||
---|---|---|
Stainless Steel Hanger Bolts Size | Pilot Hole Size | |
Soft Wood | Hard Wood | |
6-32 | 7/64 | 7/64 |
8-32 | 9/64 | 9/64 |
10-24 | 5/32 | 11/64 |
1/4-20 | 7/32 | 15/64 |
5/16-18 | 9/32 | 19/64 |
3/8-16 | 11/32 | 23/64 |
UK, Philippines, Bahrain, United Arab Emirates (UAE) | stainless hanger bolts |
United Kingdom -UK, China, South Africa, Chile | Wood Hanger Screw |
Philippines, Malaysia, Philippines, Netherlands | M6/M8/M10 Stainless Steel Hanger Bolts |
Spain, Malaysia, Germany, Australia | 6 Inch Stainless Steel Hanger Bolts |
Europe, Sweden, Oman, Egypt | U Bolt Hanger |
Europe, Singapore, USA, Malaysia | Long Stainless Steel Hanger Bolts |
Malaysia, Colombia, South Africa, Turkey | Stainless Steel Hanger Bolts For Wood |
Canada, Japan, Saudi Arabia (KSA), Italy | metric hanger bolts nut |
Malaysia, South Korea, Bangladesh, UK | Stainless Steel A2 M10 200mm 250mm 300mm Solar Hanger Bolt |
Mexico, Taiwan, Thailand, Malaysia | Double Head Stainless Steel Hanger Bolts |
Singapore, Canada, Malaysia, Iran | stainless steel double end bolt threaded screw hanger bolt |
Poland, Romania, Kuwait, Singapore | Stainless Steel Solar Panel Mounting Double Threaded Hanger Bolt |
Ellington -United States, NY 12203 (USA), Brazil, Russia | Long Hanger Bolt Double Headed Bolt With Self-Tapping Screw |
Singapore, Los Alamos -Mexico, Finland, Norway | Metal Roof Stainless Steel M10 Hanger Bolt For Solar Panel Assembly |
Malaysia, Qatar, Nigeria, Dubai | M5 M6 M8 SS Wooden Thread Hanger Bolt |
Singapore, Dammam -KSA, UAE, Hong Kong | Stainless Steel SS304 solar roof hanger bolt |
Thailand, Malaysia, Indonesia, UK | Stainless Steel stud Hanger Bolt for Solar M10 with Flange Nuts and EPDM |
Belgium, Czechia, UAE, Malaysia | M4 M5 M6 M8 M10 TX Galvanized Star Drive Thread Head Stainless Steel Double Threaded Hanger Bolts |
Malaysia, Europe, France, Philippines | stainless steel M10 200mm 300mm hanger bolt for solar panel roof mounting |
Stainless Steel Hanger Bolts Length (B) |
Machine Thread Length (C) |
Wood Thread Length (D) |
---|---|---|
1/4-20 (A) | ||
2 | 1 | 1 |
2-1/2 | 1 | 1-1/2 |
3 | 1-1/2 | 1-1/2 |
3-1/2 | 1-1/2 | 2 |
4 | 2 | 2 |
5/16-18 (A) | ||
2 | 1 | 1 |
2-1/2 | 1 | 1-1/2 |
3 | 1-1/2 | 1-1/2 |
3-1/2 | 1-1/2 | 2 |
4 | 2 | 2 |
3/8-16 (A) | ||
3 | 1-1/2 | 1-1/2 |
3-1/2 | 1-1/2 | 2 |
4 | 2 | 2 |
5 | 2-1/2 | 2-1/2 |
6 | 2-1/2 | 3-1/2 |
1/2-13 (A) | ||
3 | 1 | 2 |
3-1/2 | 1-1/2 | 2 |
4 | 2 | 2 |
6 | 2-1/2 | 3-1/2 |
Stainless Steel Hanger Bolts Diameter | Length | Thread | Machine | Lag | #/m |
---|---|---|---|---|---|
6-32 | 5/8 | Full | 1/4 | 3/8 | 2.0 |
6-32 | 3/4 | 3/8 | 3/8 | 2.0 | |
6-32 | 7/8 | 1/4 | 5/8 | 3.0 | |
6-32 | 1 | 3/8 | 5/8 | 3.0 | |
6-32 | 1 1/4 | 5/8 | 5/8 | 4.0 | |
6-32 | 1 1/2 | 7/8 | 5/8 | 5.0 | |
6-32 | 2 1/2 | 1 1/2 | 1 | 7.0 | |
8-32 | 5/8 | 1/4 | 3/8 | 3.0 | |
8-32 | 3/4 | 3/8 | 3/8 | 3.0 | |
8-32 | 7/8 | 1/4 | 5/8 | 4.0 | |
8-32 | 1 | 3/8 | 5/8 | 4.0 | |
8-32 | 1 1/4 | 5/8 | 5/8 | 5.0 | |
8-32 | 1 1/2 | 5/8 | 7/8 | 6.0 | |
8-32 | 1 3/4 | 3/4 | 1 | 7.0 | |
8-32 | 2 | 1 | 1 | 8.0 | |
8-32 | 2 1/2 | 1 | 1 1/2 | 11.0 | |
10-24 | 7/8 | 1/4 | 5/8 | 4.0 | |
10-24 | 1 | 3/8 | 5/8 | 6.0 | |
10-24 | 1 1/4 | 5/8 | 5/8 | 7.0 | |
10-24 | 1 1/2 | 5/8 | 7/8 | 8.0 | |
10-24 | 1 3/4 | 3/4 | 1 | 9.0 | |
10-24 | 2 | 1 | 1 | 11.0 | |
10-24 | 2 1/2 | 1 | 1 1/2 | 13.0 | |
10-24 | 3 | 1 1/2 | 1 1/2 | 16.0 | |
10-24 | 3 1/2 | 1 1/2 | 2 | 19.0 | |
10-32 | 3/4 | 3/8 | 3/8 | 6.0 | |
10-32 | 1 | 3/8 | 5/8 | 6.0 | |
10-32 | 1 1/4 | 5/8 | 5/8 | 8.0 | |
10-32 | 1 1/2 | 5/8 | 7/8 | 9.0 | |
10-32 | 1 3/4 | 3/4 | 1 | 9.0 | |
10-32 | 2 | 1 | 1 | 11.0 | |
10-32 | 2 1/2 | 1 | 1 1/2 | 13.0 | |
10-32 | 3 | 1 1/2 | 1 1/2 | 16.0 | |
10-32 | 3 1/2 | 1 1/2 | 2 | 19.0 | |
1/4-20 | 1 | 3/8 | 5/8 | 9.0 | |
1/4-20 | 1 1/4 | 5/8 | 5/8 | 12.0 | |
1/4-20 | 1 1/2 | 5/8 | 7/8 | 14.0 | |
1/4-20 | 1 3/4 | 3/4 | 1 | 16.0 | |
1/4-20 | 2 | 1 | 1 | 19.0 | |
1/4-20 | 2 1/4 | 1 | 1 1/4 | 21.0 | |
1/4-20 | 2 1/2 | 1 | 1 1/2 | 24.0 | |
1/4-20 | 2 3/4 | 1 1/4 | 1 1/2 | 25.0 | |
1/4-20 | 3 | 1 1/2 | 1 1/2 | 29.0 | |
1/4-20 | 3 1/2 | 1 1/2 | 2 | 34.0 | |
1/4-20 | 4 | 2 | 2 | 39.0 | |
1/4-20 | 4 1/2 | 1 1/2 | 3 | 44.0 | |
1/4-20 | 5 | 2 | 3 | 49.0 | |
1/4-20 | 5 1/2 | 2 1/2 | 3 | 54.0 | |
1/4-20 | 6 | 3 | 3 | 59.0 | |
5/16-18 | 1 1/4 | 1/2 | 3/4 | 19.0 | |
5/16-18 | 1 1/2 | 5/8 | 7/8 | 26.0 | |
5/16-18 | 1 3/4 | 3/4 | 1 | 26.0 | |
5/16-18 | 2 | 1 | 1 | 31.0 | |
5/16-18 | 2 1/4 | 1 | 1 1/4 | 35.0 | |
5/16-18 | 2 1/2 | 1 | 1 1/2 | 39.0 | |
5/16-18 | 2 3/4 | 1 1/4 | 1 1/2 | 43.0 | |
5/16-18 | 3 | 1 1/2 | 1 1/2 | 47.0 | |
5/16-18 | 3 1/4 | 1 1/4 | 2 | 54.0 | |
5/16-18 | 3 1/2 | 1 1/2 | 2 | 54.0 | |
5/16-18 | 3 3/4 | 1 3/4 | 2 | 59.0 | |
5/16-18 | 4 | 2 | 2 | 65.0 | |
5/16-18 | 4 1/2 | 1 1/2 | 3 | 71.0 | |
5/16-18 | 5 | 2 | 3 | 79.0 | |
5/16-18 | 5 1/2 | 2 1/2 | 3 | 88.0 | |
5/16-18 | 6 | 3 | 3 | 98.0 | |
3/8-16 | 1 1/2 | 1/2 | 1 | 35.0 | |
3/8-16 | 2 | 1 | 1 | 45.0 | |
3/8-16 | 2 1/4 | 1 | 1 1/4 | 51.0 | |
3/8-16 | 2 1/2 | 1 | 1 1/2 | 56.0 | |
3/8-16 | 3 | 1 1/2 | 1 1/2 | 70.0 | |
3/8-16 | 3 1/2 | 1 1/2 | 2 | 82.0 | |
3/8-16 | 4 | 2 | 2 | 94.0 | |
3/8-16 | 4 1/2 | 1 1/2 | 3 | 108.0 | |
3/8-16 | 5 | 2 | 3 | 118.0 | |
3/8-16 | 5 1/2 | 2 1/2 | 3 | 130.0 | |
3/8-16 | 6 | 3 | 3 | 140.0 | |
1/2-13 | 3 | 1 | 2 | 130.0 | |
1/2-13 | 3 1/2 | 1 1/2 | 2 | 153.0 | |
1/2-13 | 4 | 2 | 2 | 165.0 | |
1/2-13 | 4 1/2 | 2 | 3 | 209.0 | |
5/16-18 | 3 1/2 | Partial | 1 1/2 | 2 | 54.0 |
5/16-18 | 5 | Partial | 1 1/4 | 3 | 79.0 |
5/16-18 | 3 | Full | 1 1/2 | 1 1/2 | 47.0 |
5/16-18 | 3 1/2 | 1 1/2 | 2 | 54.0 | |
5/16-18 | 4 1/2 | Partial | 1 1/2 | 2 | 71.0 |
5/16-18 | 6 | Partial | 1 1/2 | 3 | 96.0 |
Stainless Steel Hanger Bolts Diameter (in Inch) | Length (in Inch) | Machine (in Inch) | Lag (in Inch) | #/m (in Inch) |
---|---|---|---|---|
8-32 | 1 1/2 | 3/8 | 7/8 | 6.0 |
8-32 | 1 3/4 | 1/2 | 1 | 7.0 |
8-32 | 2 | 5/8 | 1 | 8.0 |
8-32 | 2 1/4 | 1 1/4 | 1 3/4 | 9.0 |
8-32 | 2 1/2 | 5/8 | 1 1/2 | 11.0 |
8-32 | 2 3/4 | 7/8 | 1 1/2 | 12.0 |
8-32 | 3 | 7/8 | 1 1/2 | 12.0 |
10-24 | 1 1/2 | 3/8 | 7/8 | 8.0 |
10-24 | 1 3/4 | 1/2 | 1 | 9.0 |
10-24 | 2 | 5/8 | 1 | 11.0 |
10-24 | 2 1/2 | 5/8 | 1 1/2 | 13.0 |
10-24 | 3 | 7/8 | 1 1/2 | 16.0 |
10-24 | 3 1/2 | 7/8 | 2 | 19.0 |
10-24 | 4 | 1 1/8 | 2 | 23.0 |
10-24 | 4 1/2 | 1 1/8 | 3 | 26.0 |
1/4-20 | 1 1/2 | 3/8 | 7/8 | 14.0 |
1/4-20 | 1 3/4 | 1/2 | 1 | 16.0 |
1/4-20 | 2 | 5/8 | 1 | 19.0 |
1/4-20 | 2 1/4 | 5/8 | 1 1/4 | 21.0 |
1/4-20 | 2 1/2 | 5/8 | 1 1/2 | 24.0 |
1/4-20 | 2 3/4 | 7/8 | 1 1/2 | 25.0 |
1/4-20 | 3 | 7/8 | 1 1/2 | 29.0 |
1/4-20 | 3 1/2 | 7/8 | 2 | 34.0 |
1/4-20 | 4 | 1 1/8 | 2 | 39.0 |
1/4-20 | 4 1/2 | 1 1/8 | 3 | 44.0 |
1/4-20 | 5 | 1 3/8 | 3 | 49.0 |
1/4-20 | 5 1/2 | 1 1/2 | 3 | 54.0 |
1/4-20 | 6 | 1 1/2 | 3 | 59.0 |
1/4-20 | 6 1/2 | 1 1/2 | 3 | 64.0 |
1/4-20 | 7 | 2 1/2 | 3 | 72.0 |
1/4-20 | 7 1/2 | 2 1/2 | 3 | 76.0 |
1/4-20 | 8 | 2 1/2 | 3 | 79.0 |
1/4-20 | 8 1/2 | 2 1/2 | 3 | 84.0 |
1/4-20 | 9 | 2 1/2 | N/A | 92.0 |
1/4-20 | 9 1/2 | 2 1/2 | 3 | 96.0 |
1/4-20 | 10 | 2 1/2 | 3 | 102.0 |
1/4-20 | 12 | 2 1/2 | 3 | 124.0 |
5/16-18 | 1 1/4 | 3/8 | 5/8 | 20.0 |
5/16-18 | 1 1/2 | 3/8 | 7/8 | 22.0 |
5/16-18 | 1 3/4 | 1/2 | 1 | 26.0 |
5/16-18 | 2 | 5/8 | 1 | 31.0 |
5/16-18 | 2 1/4 | 5/8 | 1 1/4 | 35.0 |
5/16-18 | 2 1/2 | 5/8 | 1 1/2 | 39.0 |
5/16-18 | 2 3/4 | 7/8 | 1 1/2 | 43.0 |
5/16-18 | 3 | 7/8 | 1 1/2 | 47.0 |
5/16-18 | 3 1/4 | 7/8 | 1 1/2 | 51.0 |
5/16-18 | 3 1/2 | 7/8 | 2 | 54.0 |
5/16-18 | 3 3/4 | 1 1/8 | 2 | 59.0 |
5/16-18 | 4 | 1 1/8 | 2 | 65.0 |
5/16-18 | 4 1/2 | 1 1/8 | 3 | 71.0 |
5/16-18 | 5 | 1 3/8 | 3 | 79.0 |
5/16-18 | 5 1/2 | 1 1/2 | 3 | 88.0 |
5/16-18 | 6 | 1 1/2 | 3 | 98.0 |
3/8-16 | 2 | 5/8 | 1 | 45.0 |
3/8-16 | 2 1/4 | 5/8 | 1 1/4 | 51.0 |
3/8-16 | 2 1/2 | 5/8 | 1 1/2 | 56.0 |
3/8-16 | 3 | 7/8 | 1 1/2 | 70.0 |
3/8-16 | 3 1/2 | 7/8 | 2 | 82.0 |
3/8-16 | 4 | 1 1/8 | 2 | 94.0 |
3/8-16 | 4 1/2 | 1 1/8 | 3 | 108.0 |
3/8-16 | 5 | 1 3/8 | 3 | 118.0 |
3/8-16 | 5 1/2 | 1 1/2 | 3 | 130.0 |
3/8-16 | 6 | 1 1/2 | 3 | 140.0 |
3/8-16 | 7 | 2 1/2 | 3 | 166.0 |
3/8-16 | 8 | 2 1/2 | 3 | 190.0 |
3/8-16 | 9 | 2 1/2 | 3 | 215.0 |
3/8-16 | 10 | 2 1/2 | 3 | 238.0 |
3/8-16 | 11 | 2 1/2 | 3 | 262.0 |
3/8-16 | 12 | 2 1/2 | 3 | 286.0 |
3/8-16 | 14 | 2 1/2 | 3 | 336.0 |
1/2-13 | 6 | 2 1/2 | 3 | 253.0 |
1/2-13 | 7 | 2 1/2 | 3 | 297.0 |
1/2-13 | 8 | 2 1/2 | 3 | 348.0 |
1/2-13 | 10 | 2 1/2 | 3 | 429.0 |
1/2-13 | 12 | 2 1/2 | 3 | 521.0 |
System of Measurement: Imperial (Inch) | |||
Stainless Steel Hanger Bolts Length | Finish | Pkg Qty | Price |
---|---|---|---|
1-1/2 | Plain | CS | 387.00 |
1-1/2 | Plain | EA | 3.37 |
2 | Plain | CS | 436.00 |
2 | Plain | EA | 1.51 |
2-1/2 | Plain | CS | 333.00 |
2-1/2 | Plain | EA | 1.83 |
3 | Plain | CS | 514.00 |
3 | Plain | EA | 2.09 |
3-1/2 | Plain | CS | 727.00 |
3-1/2 | Plain | EA | 8.38 |
4 | Plain | CS | 505.00 |
4 | Plain | EA | 3.12 |
6 | Plain | CS | 1115.00 |
Stainless Steel Hanger Bolts: Dimensions | ||||
---|---|---|---|---|
Diameter & Thread Pitch |
Standard Length (C) | Machine Thread Length (A) | Lag Thread Length (B) | Center Space (D) |
6-32 | 5/8 | 1/4 | 3/8 | |
3/4 | 3/8 | 3/8 | ||
7/8 | 1/4 | 5/8 | ||
1 | 3/8 | 5/8 | ||
8-32 | 5/8 | 1/4 | 3/8 | |
3/4 | 3/8 | 3/8 | ||
7/8 | 1/4 | 5/8 | ||
1 | 3/8 | 5/8 | ||
1-1/4 | 5/8 | 5/8 | ||
1-1/2 | 5/8 | 7/8 | ||
1-3/4 | 3/4 | 1 | ||
2 | 1 | 1 | ||
10-24 | 1 | 3/8 | 5/8 | |
1-1/4 | 5/8 | 5/8 | ||
1-1/2 | 5/8 | 7/8 | ||
1-3/4 | 3/4 | 1 | ||
2 | 1 | 1 | ||
2-1/2 | 1 | 1-1/2 | ||
3 | 1-1/2 | 1-1/2 | ||
3-1/2 | 1-1/2 | 2 | ||
1/4-20 | 1 | 3/8 | 5/8 | |
1-1/4 | 5/8 | 5/8 | ||
1-1/2 | 5/8 | 7/8 | ||
1-3/4 | 3/4 | 1 | ||
2 | 1 | 1 | ||
2-1/4 | 1 | 1-1/4 | ||
2-1/2 | 1 | 1-1/2 | ||
2-3/4 | 1-1/4 | 1-1/2 | ||
3 | 1-1/2 | 1-1/2 | ||
3-1/2 | 1-1/2 | 2 | ||
4 | 2 | 2 | ||
4-1/2 | 1-1/8 | 3 | 3/8 | |
5 | 1-3/8 | 3 | 5/8 | |
6 | 1-1/2 | 3 | 1-1/2 | |
5/16-18 | 1-1/2 | 5/8 | 7/8 | |
1-3/4 | 3/4 | 1 | ||
2 | 1 | 1 | ||
2-1/4 | 1 | 1-1/4 | ||
2-1/2 | 1 | 1-1/2 | ||
2-3/4 | 1-1/4 | 1-1/2 | ||
3 | 1-1/2 | 1-1/2 | ||
3-1/2 | 1-1/2 | 2 | ||
3-3/4 | 1-3/4 | 2 | ||
4 | 2 | 2 | ||
4-1/2 | 1-1/8 | 3 | 3/8 | |
5 | 1-3/8 | 3 | 5/8 | |
5-1/2 | 1-1/2 | 3 | 1 | |
6 | 1-1/2 | 3 | 1-1/2 | |
3/8-16 | 1-1/2 | 1/2 | 1 | |
2 | 1 | 1 | ||
2-1/2 | 1 | 1-1/2 | ||
3 | 1-1/2 | 1-1/2 | ||
3-1/2 | 1-1/2 | 2 | ||
4 | 2 | 2 | ||
4-1/2 | 1-1/8 | 3 | 3/8 | |
5 | 1-3/8 | 3 | 5/8 | |
5-1/2 | 1-1/2 | 3 | 1 | |
6 | 1-1/4 | 3 | 1-3/4 | |
8 | 2-1/2 | 3 | 2-1/2 | |
10 | 2-1/2 | 3 | 4-1/2 | |
12 | 2-1/2 | 3 | 6-1/2 | |
14 | 2-1/2 | 3 | 8-1/2 | |
1/2-13 | 3 | 1 | 2 | |
3-1/2 | 1-1/2 | 2 | ||
4 | 2 | 2 | ||
5 | 2 | 3 | ||
6 | 2-1/2 | 3 | 1/2 | |
8 | 2-1/2 | 3 | 2-1/2 | |
10 | 2-1/2 | 3 | 4-1/2 | |
12 | 2-1/2 | 3 | 6-1/2 |