Stainless Steel Flanges

Flanges are round or ring-shaped components used to connect pipes, valves, pumps, etc. in a piping system. Stainless steel flanges contain chromium which forms a protective layer on the surface of the steel to prevent corrosion.

The SS Flange is available in a variety of sizes, shapes and types including slip-on, weld neck, threaded, blind and lap flange. Each is designed for a specific type of pipe or device. They are fastened with the help of bolts throughout the welding process.

Stainless Steel Pipe Flanges are used in the oil and gas, chemical processing, food and beverage, and pharmaceutical industries. They have high durability, corrosion resistance and ability to withstand high temperatures and pressures- they are suitable for use in harsh environments and with various corrosive materials.

Flanges can be easily installed by bolting or welding. They are also easy to clean and maintain- this why they are used in applications where cleanliness is important. The SS flange price is cheaper than other flanges.

 

 

Manufacturer of Stainless steel forged flange in India, view SS flange types here

 

Stainless Steel Flanges Manufacturer in India manufactures different types of flanges for specific applications and purposes.

• Stainless Steel Weld Neck Flange has a long tapered hub and used for high pressure applications.
• Stainless Steel Slip On Flange is slipped over the end of a pipe and is then welded in place.
• Stainless Steel Blind Flange is used to seal the end of a pipe or valve.
• Stainless Steel Threaded Flanges have threads on the inside of the flange and are screwed onto a pipe.
• Stainless Steel Lap Joint Flanges are used in systems that require frequent dismantling or where alignment is a problem.

.

 

 

As supplier we keep India's largest inventory of ASTM A182 stainless steel blind, slip on and weld neck flange at best price, see stainless steel pipe flange size chart

 

To determine the size of your Stainless Steel Flanged Fittings, you will need to measure the outside diameter (OD) and the inside diameter (ID). Count the number of bolt holes on the Forged Stainless Steel Flanges- this will help you identify the type of flange you have, as different types of flanges have different bolt-hole patterns. Also, make sure to measure the bolt-hole diameter.

Once you have these measurements, you can consult a flange size chart or reference guide to determine the size and type of flange you have.

 

 

We are NABL approved class 150 stainless steel threaded flange stockists according to ANSI/ASME B16.5, view causes of breaking SS floor flange

 

Stainless Steel Flanges Suppliers designed the flanges to withstand high pressures and temperatures, but they can still break or fail under certain conditions.

If the flange is subjected to excessive loads or pressure beyond its design capacity, it can fail or break. In case the flange is not installed properly, it can cause stress concentrations that can lead to cracking or failure over time.

If the Stainless Steel Floor Flange is subjected to repeated stress cycles over time, it can develop cracks or fail due to metal fatigue. If the flange is exposed to rapid or extreme temperature changes, it can cause thermal stress that can lead to cracking or failure over time.

 

Are you looking for stainless steel socket weld flange ? Find here with price list and must check SS plate flange pressure rating also

 

2 Inch Stainless Steel Flanges can be distinguished based on their pressure-temperature rating- it is a measure of their maximum allowable pressure and temperature ranges. The class rating system helps to ensure the flanges are suitable for given applications and working conditions.

The class rating of a flange is determined by its pressure-temperature rating, It is expressed in pounds per square inch (psi) and temperature in degrees Fahrenheit (°F). For example, Class 150 is rated for a maximum working pressure of 150 psi at temperatures up to 600°F.

It is crucial to choose them efficiently based on the specific requirements of the application as well as working conditions. This can include factors like pressure, temperature, fluid type, and flow rate.

 

Know complete specifications and weight chart of stainless steel lap joint flange here as well as view ASME B16.5 and ASME B16.47 difference

 

ASME B16.5 is a standard for steel flanges and flanged fittings- it covers flanges from NPS 1/2 to NPS 24 and pressure classes from 150 to 2500. It provides dimensions and pressure-temperature ratings for various types of flanges. The standard also provides specifications for materials, marking, and testing of the flanges.

ASME B16.47 covers larger diameter Flange Stainless from NPS 26 to NPS 60 and pressure classes from 75 to 900. This standard is further divided into two series: Series A and Series B. Series A covers weld neck and blind flanges, while Series B covers flanges with raised face or ring joint face.