Nickel Alloy Fasteners

ASTM B160 Nickel 200 Hex Bolts and Nuts Manufacturer in india

Nickel alloy fasteners have nickel as their primary element. These fasteners are used in combination with other metals like titanium, copper, aluminum, titanium to give them enhanced performance and tolerances. The fasteners in this range exhibit superior corrosion resistance properties along with excellent hardness due to their superior chemical composition. There are different types of fasteners within this grade which include screws, nuts, washers, bolts, nails, anchors, reverts, etc. These fasteners mechanically affix two or more metal equipment together within the system. The components strongly bind with all types of metal modules and securely seal the modules for long periods.

The versatile fasteners are characterized by their superior resistance to high pressures and temperatures in different environments. The nickel alloy fasteners can be permanent or dismantled without causing any damage to the existing system. Nickel alloy 200 and 201 are the most common grades of nickel alloy fasteners. Both these grades exhibit superior tensile and yield strengths. They possess a density of 8.902 gm/cc with excellent elongation properties. Their good magnetic and electric properties give them an edge in the market. A nickel alloy fastener has an average life span of 30 years or more depending on the application and environment. Apart from this, the material is recyclable and can be reused.

Nickel Alloy Fasteners

Nickel Alloy Bolts

Nickel 200 Bolts

buy Polished & Brushed Ni 200 Studs and Threaded Rod In Both Metric and Imperial (BSW, BSF, BA, UNC & UNF) Thread forms, view price list

Nickel alloy 200 and 201 are both commercially pure nickel grades. Both these grades are low-carbon modules that offer a range of advantages. However, both of them can be distinguished by certain features.

• The major difference between both these components is the carbon content in their composition. A 201 nickel alloy contains only 0.02% of maximum carbon compared to 0.15% of nickel 200 alloys.
• The nickel 200 is a pure grade nickel component, while the nickel 201 is a low carbon modification of the 200 grade.
• The nickel 200 has an enhanced hardness and work-hardening rate in comparison to the nickel 201 grade. 
• Nickel 201 is suited in applications that exceed 600 degrees F. Nickel 200 grade performs well in temperatures below 600 degrees F.
• Nickel 201 is more suited for cold forming procedures in comparison to nickel 200 grade.

Nickle 200 hex bolt is a six-sided bolt that has external threads which are fixed on the component using a nut. A hex bolt can be fully or partially threaded, consisting of a hex cap or a hex tap. The hexagonal shape of these bolts allows them to be easily fitted and dismantled across different components. The bolts offer exceptional strength and performance in environments below 600 degrees F. Their high tolerance to alkaline and neutral salts leads to low corrosion rates. The unique designs and threads used to produce these bolts enable them to fasten wood, steel, and a range of construction materials.

View our sizes, weight chart & dimension table of Nickel Alloy 201 Hex Screws, Flange Bolt and Washers

Nickel Alloy Fasteners Description	No.
Slotted Pan Head Machine Screws	DIN 85
Slotted Cheese Head Machine Screws	DIN 84
Flat Washer (without Chamfer)	DIN 125A
Cotter Pin	DIN 94
Split Lock Washer	DIN 127B
Flat Washer (with Chamfer)	DIN 125B
Spring Wave Washer	DIN 137B
Machine Screws Hex Nut, Finished Hex Jam Nut	DIN 439B
Wing Nut	DIN 315
Long Arm Hex Key	DIN 911
Hex Socket Set Screws	DIN 916
Hex Socket Head Cap Screws	DIN 912
Hex Head Cap Screws Fully Threaded	DIN 933
Hex Head Cap Screws Partially Threaded	DIN 931
Double End Stud	DIN 939
Finished Hex Nut	DIN 934
Hex Head Cap Screws Fully Threaded	DIN 961
Hex Head Cap Screws Partially Threaded	DIN 960
Slotted Oval Head Machine Screws	DIN 964
Slotted Flat Head Machine Screws	DIN 963
Phillips Oval Head Machine Screws	DIN 966
Phillips Flat Head Machine Screws	DIN 965
Threaded Rod	DIN 975
Hex Nylon Insert Lock Nut	DIN 985
Hex Flat Socket Head Cap Screws	DIN 7991
Hex Steel Prevailing Torque Lock Nut	DIN 980V
External Tooth Lock Washer	DIN 6797A
Rod Coupling Nut	DIN 6334
Hex Low Socket Head Cap Screws
Internal Tooth Lock Washer
Hex Flange Nut
Hex Flange Head Screws
Hex Button Socket Head Cap Screws
Hex Socket Head Shoulder Screws
Phillips Pan Head Machine Screws

 

Compare our price list of Nickel 200 Nut Bolts before buying ASME SB 160 UNS N02200 forging material

 

Nickel Alloy Hex Nuts Dimensions Standards

Nominal Size or Basic Major Thread Diameter		F			G		H
		Width, Across Flats			Width, Across Corners		Thickness
		Basic	Max	Min	Max	Min	Basic	Max	Min
1/4	.2500	7/16	.438	.428	.505	.488	7/32	.226	.212
5/16	.3125	1/2	.500	.489	.577	.557	17/64	.273	.258
3/8	.3750	9/16	.562	.551	.650	.628	21/64	.337	.479
7/16	.4375	11/16	.688	.675	.794	.768	3/8	.385	.365
1/2	.5000	3/4	.750	.736	.866	.840	7/16	.448	.427
9/16	.5625	7/8	.875	.861	1.010	.982	31/64	.496	.473
5/8	.6250	15/16	.938	.922	1.083	1.051	35/64	.559	.535
3/4	.7500	1-1/8	1.125	1.088	1.299	1.240	41/64	.665	.617
7/8	.8750	1-5/16	1.312	1.269	1.516	1.447	3/4	.776	.724
1	1.0000	1-1/2	1.500	1.450	1.732	1.653	55/64	.887	.831
1-1/8	1.1250	1-11/16	1.688	1.631	1.949	1.859	31/32	.999	.939
1-3/8	1.3750	2-1/16	2.062	1.994	2.382	2.273	1-11/64	1.206	1.138
1-1/2	1.500	2-1/4	2.250	2.175	2.598	2.480	1-9/32	1.ASTM A194 GR. 8	1.245
1-5/8	1.6250	2-7/16	2.438	2.356	2.815	2.686	1-25/64	1.429	1.353
1-3/4	1.7500	2-5/8	2.625	2.538	3.031	2.893	1-1/2	1.540	1.460
2	2.0000	3	3.000	2.900	3.464	3.306	1-23/32	1.763	1.675
2-1/4	2.2500	3-3/8	3.375	3.263	3.897	3.719	1-15/16	1.986	1.890
2-1/2	2.5000	3-3/4	3.750	3.625	4.330	4.133	2-5/32	2.209	2.105
2-3/4	2.7500	4-1/8	4.125	3.988	4.763	4.546	2-3/8	2.431	2.319

 

ASME SB 160 Nickel 200 Nuts Size Chart

Nickel 200 Nuts Size, (mm)	Diameter*, (mm)	Height, (mm)
		Nickel Alloy Hex Nuts	Nickel Alloy Jam Nuts	Nickel Alloy Nylock Nuts
2	4	1.6	1.2	-
2.5	5	2	1.6	-
3	5.5	2.4	1.8	4
4	7	3.2	2.2	5
5	8	4	2.7	5
6	10	5	3.2	6
7	11	5.5	3.5	-
8	13	6.5	4	8
10	17	8	5	10
12	19	10	6	12
14	22	11	7	14
16	24	13	8	16
18	27	15	9	18.5
20	30	16	10	20
*This is the diameter across the flats. It is also the size of wrench to use.

 

Ni 200 Heavy Hex Nuts Dimensions Schedule

Nominal Size or Basic Major Thread Diameter		F			G		H
		Width Across Flats			Width Across Corners		Thickness
		Basic	Max	Min	Max	Min	Basic	Max	Min
1/4	.2500	1/2	.500	.488	.577	.556	15/64	.250	.218
5/16	.3125	9/16	.562	.546	.650	.622	19/64	.314	.280
3/8	.3750	11/16	.688	.669	.794	.763	23/64	.377	.341
7/16	.4375	3/4	.750	.728	.866	.830	27/64	.441	.403
1/2	.5000	7/8	.875	.850	1.010	.969	31/64	.504	.464
9/16	.5625	15/16	.938	.909	1.083	1.037	35/64	.568	.526
5/8	.6250	1-1/16	1.062	1.031	1.227	1.175	39/64	.631	.587
3/4	.7500	1-1/4	1.250	1.212	1.443	1.382	47/64	.758	.710
7/8	.8750	1-7/16	1.438	1.394	1.660	1.589	55/64	.885	.833
1	1.0000	1-5/8	1.325	1.575	1.876	1.796	63/64	1.012	.956
1-1/8	1.1250	1-13/16	1.812	1.756	2.093	2.002	1-7/64	1.139	1.079
1-1/4	1.2500	2	2.000	1.938	2.309	2.209	1-7/32	1.251	1.187
1-3/8	1.3750	2-3/16	2.188	2.119	2.526	2.416	1-11/32	1.378	1.460
1-1/2	1.5000	2-3/8	2.375	2.300	2.742	2.622	1-15/32	1.505	1.433
1-5/8	1.6250	2-9/16	2.562	2.481	2.959	2.828	1-19/32	1.632	1.556
1-3/4	1.7500	2-3/4	2.750	2.662	3.175	3.035	1-23/32	1.759	1.679
2	2.0000	3-1/8	3.125	3.025	3.608	3.449	1-31/32	2.013	1.925
2-1/4	2.2500	3-1/2	3.500	3.388	4.041	3.862	2-13/64	2.251	2.155
2-1/2	2.5000	3-7/8	3.875	3.750	4.474	4.275	2-29/64	2.505	2.401
2-3/4	2.7500	4-1/4	4.250	4.112	4.907	4.688	2-45/64	2.759	2.647
3	3.0000	4-5/8	4.625	4.475	5.340	5.102	2-61/64	3.013	2.893
3-1/4	3.2500	5	5.000	4.838	5.774	5.515	3-3/16	3.252	3.124
3-1/2	3.5000	5-3/8	5.375	5.200	6.207	5.928	3-7/16	3.506	3.370
3-3/4	3.7500	5-3/4	5.750	5.562	6.640	6.341	3-11/16	3.670	3.616
4	4.0000	6-1/8	6.125	5.925	7.073	6.755	3-15/16	4.014	3.862

 

A trusted supplier & exporter of DIN / EN 2.4066 Bolts buy many Petrochemical, Oil & Gas companies

 

Nickel Alloy hex bolt Dimensions chart

NOMINAL SIZE (D)	BODY DIAMETER		HEAD THICKNESS		ACROSS THE FLATS		ACROSS BOLTS CORNERS
	D (MAX)	D (MIN)	H (MAX)	H (MIN)	F (MAX)	F (MIN)	C (MAX)	C (MIN)
m10	10.00	9.78	6.63	6.17	17.00	15.73	18.48	17.77
m12	12.00	11.73	7.76	4.24	19.00	17.73	20.78	20.03
m14	14.00	13.73	9.09	8.51	22.00	20.67	24.25	23.35
m16	16.00	15.73	10.32	9.68	24.00	23.67	27.71	26.75
m20	20.00	19.67	12.88	12.12	30.00	29.16	34.64	32.95
m24	24.00	23.67	15.44	14.56	36.00	35.00	41.57	39.55
m30	30.00	29.67	19.48	17.92	46.00	45.00	53.12	50.85
m36	36.00	35.61	23.38	21.63	55.00	53.80	63.51	60.79
m42	42.00	41.38	26.97	25.03	65.00	62.90	75.06	71.71
m48	48.00	47.38	31.07	28.93	75.00	72.60	86.60	82.76
m56	56.00	55.26	36.2	33.80	85.00	82.20	98.15	93.71
m64	64.00	63.26	41.32	38.68	95.00	91.80	109.70	104.65
m72	72.00	71.26	46.45	43.55	105.00	101.40	121.24	115.60
m80	80.00	79.26	51.58	48.42	115.00	111.00	132.72	126.54
m90	90.00	89.13	57.74	54.26	130.00	125.50	150.11	143.07
m100	90.00	99.13	63.9	60.10	145.00	140.00	167.43	159.60

 

Dimensions chart of Uns N02200 Heavy Hex Bolt

HEAVY HEX BOLT DIMENSIONS
Nickel Alloy Bolt Size	A (max)	B	C (min)	D	E		F Thread Length for Nickel Alloy Bolt Length
					max	min	6" and shorter	over 6"
1/2"	0.515	7/8	0.969	11/32	0.03	0.01	1.250	1.500
5/8"	0.642	1-1/16	1.175	27/64	0.06	0.02	1.500	1.750
3/4"	0.768	1-1/4	1.383	1/2	0.06	0.02	1.750	2.000
7/8"	0.895	1-7/16	1.589	37/64	0.06	0.02	2.000	2.250
1"	1.022	1-5/8	1.796	43/64	0.09	0.03	2.250	2.500
1-1/8"	1.149	1-13/16	2.002	3/4	0.09	0.03	2.500	2.750
1-1/4"	1.277	2	2.209	27/32	0.09	0.03	2.750	3.000
1-3/8"	1.404	2-3/16	2.416	29/32	0.09	0.03	3.000	3.250
1-1/2"	1.531	2-3/8	2.622	1	0.09	0.03	3.250	3.500
1-3/4"	1.785	2-3/4	3.035	1-5/32	0.12	0.04	3.750	4.000
2"	2.039	3-1/8	3.449	1-11/32	0.12	0.04	4.250	4.500
2-1/4"	2.305	3-1/2	3.862	1-1/2	0.19	0.06	4.750	5.000
2-1/2"	2.559	3-7/8	4.275	1-21/32	0.19	0.06	5.250	5.500
2-3/4"	2.827	4-1/4	4.688	1-13/16	0.19	0.06	5.750	6.000
3"	3.081	4-5/8	5.102	2	0.19	0.06	6.250	6.500

 

Torque chart of Nickel Bolts And Nuts Tightening And Preload

Nickel Alloy Fasteners Thread	Tightening Torque (Nm) class				Preload (Kn) Property Class/ Grade		Coefficient of friction	Min Breaking Torque
	A2-70 (304)	A1-50 (303)	A2-70 (304)	A4-80 (316)	A4-80 (316)	A1-50 (303)		A1-50 (303)	A1-70 (303)	A4-80 (316)
M2.00	0.06	0.015	0.02	0.03	0.06	0.05	0.01	0.03	0.04	0.048
	0.05	0.025	0.03	0.04	0.05	0.04	0.02
	0.036	0.04	0.04	0.055	0.036	0.025	0.03
M6.00	6.085	2.08	5.09	8	6.085	3.02	0.01	9.03	13	15
	5.054	4.01	8.08	11.08	5.054	2.059	0.02
	4.049	4.08	10.04	13.09	4.049	2.009	0.03
M1.06	0.055	0.01	0.01	0.02	0.055	0.04	0.01	0.015	0.02	0.024
	0.035	0.01	0.02	0.035	0.035	0.03	0.02
	0.03	0.02	0.025	0.045	0.03	0.02	0.03
M3.00	1	0.085	1	1.03	1	0.09	0.01	1.01	1.06	1.08
	0.065	1	1.01	1.06	0.065	0.06	0.02
	0.045	1.025	1.035	1.085	0.045	0.04	0.03
M2.05	0.09	0.025	0.045	0.06	0.09	0.065	0.01	0.06	0.09	0.096
	0.05	0.045	0.06	0.065	0.05	0.04	0.02
	0.03	0.06	0.075	0.08	0.03	0.03	0.03
M5.00	4.085	1.06	3.04	4.06	4.085	2.026	0.01	5.05	7.08	8.08
	3.093	2.04	5.01	6.09	3.093	1.083	0.02
	3.019	2.08	6.01	8	3.019	1.049	0.03
M4.00	2.097	0.08	1.07	2.03	2.097	1.008	0.01	2.07	3.08	4.03
	2.04	1.03	2.06	3.05	2.04	1.012	0.02
	1.094	1.05	3	4.01	1.094	0.09	0.03
M8.00	12.06	6.08	14.05	19.03	12.06	5.086	0.01	23	32	37
	10.02	10.01	21.04	28.07	10.02	4.075	0.02
	8.085	11.09	25.05	33.09	8.085	3.085	0.03

 

Indian Standard Code of Nickel 201 Bolt

• Bolts- IS 3757, IS 1364, IS 6639, IS 3640
• IS 3757 - High Tensile Friction Grip Bolts.
• IS 6623 - High Tensile Friction Grip Nuts.
• IS 6649 - High Tensile Friction Grip Washers.
• IS 3640 - Hexagon Fit Bolts.
• IS 1367 - Alloy Steel and Low Carbon High Tensile Nuts, Bolts, Studs as per IS 4218
• Studs- IS 1862.
• IS 6610 - Heavy washer for Steel structure.
• Nuts- IS 6623, IS 1364
• Washers- IS 6648, IS 6610, IS 2016.
• IS 6639 - Hexagon Bolts for Steel structure.

 

Drive Style of EN 2.4066 bolts

 

Nickel 200 Fasteners Weight Chart

MM THREADS AS PER IS 1363/67
APPROXIMATE WEIGHT IN KGS FOR 100 NOS
LENGTH	Nickel AlloyFasteners DIAMETER
	M 12	M 5	M 6	M 8	M 14	M 10	M 22	M 18	M 20	M 16
16 mm		0.0448	0.0743	1.0590		3.0211
20 mm	4.0892	0.0598	0.0812	1.0711		3.0411
25 mm	5.0252	0.0660	0.0897	1.0871	8.0170	3.0660
30 mm	5.0574	0.0737	1.0010	2.0070	9.0690	3.0912			18.0657	10.0707
35 mm	5.0974	0.0804	1.0120	2.0271	10.0000	4.0223		16.0026	19.0608	11.0416
40 mm	6.0410	0.0881	1.0230	2.0470	10.0288	4.0533		16.0667	20.0747	12.0107
45 mm	6.0859	0.0958	1.0340	2.0671	10.0504	4.0840		17.0241	21.0739	12.0821
50 mm	7.0299	1.0030	1.0450	2.0870	11.0261	5.0155	28.0409	17.0857	22.0727	13.0624
55 mm	7.0740		1.0560	3.0071	11.0628	5.0464	30.0120	18.0868	23.0810	14.0409
60 mm	8.0183		1.0670	3.0270	12.0255	5.0774	32.0051	20.0000	25.0126	15.0244
65 mm	8.0621		1.0781	3.0472	12.0626	6.0083	34.0014	21.0008	26.0455	16.0026
70 mm	9.0058		1.0890	3.0671	12.0987	6.0394	35.0461	22.0124	27.0778	16.0835
75 mm	9.0506		2.0000	3.0873	13.0228	6.0702	39.0063	23.0256	29.0070	17.0606
80 mm	10.0000		2.0111	4.0072	13.0889	7.0013	40.0000	24.0510	30.0303	18.0248
90 mm	10.0917			4.0472	14.0925	7.0634	41.0667	26.0042	33.0113	19.0841
100 mm	11.0820			4.0873	16.0340	8.0251	46.0296	27.0778	35.0714	21.0459
110 mm	12.0723				17.0730	8.0881	47.0170	31.0250	38.0168	23.0041
120 mm	13.0624				18.0797	9.0506	50.0000	32.0895	40.0984	24.0631
130 mm	14.0535				20.0000	10.0101	52.0632	34.0722	43.0478	26.0316
140 mm	15.0432				20.0833	10.0707	55.0556	35.0461	46.0296	27.0933
150 mm	16.0340				22.0222	11.0312	58.0824	37.0594	48.0544	29.0412
160 mm	17.0241				24.0272	11.0905	61.0728	40.0984	50.0505	31.0056
170 mm	18.0116					12.0500	64.0935		53.0191	32.0680
180 mm	19.0011				26.0882	13.0123	67.0568		55.0556	34.0247
190 mm	19.0920					13.0736	70.0423		58.0140	35.0971
200 mm	20.0833				29.0586	14.0327	73.0529	49.0020	60.0976	37.0594
220 mm	22.0624					15.0528	79.0365		65.0789	40.0650
240 mm	24.0510					16.0722	84.0746		71.0429	43.0860
250 mm	25.0381					17.0301	87.0719		74.0627	45.0455
260 mm	26.0316					17.0921	90.0909		76.0923	47.0170
280 mm	28.0090					19.0157	98.0039		81.0967	50.0505
300 mm	29.0940					20.0325	104.0167		87.0719	53.0763
320 mm	31.0646								92.0593	56.0818
340 mm	33.0557								98.0039	60.0241
360 mm	35.0211								104.0167	63.0291
380 mm	37.0037								108.0696	66.0667
400 mm	39.0063								113.0636	69.0444

 

Uns N02200 Hex Bolts Surface Coating

• Hot Dipped Galvanized(HDG) Fasteners
• Plain Finish Fasteners
• Zinc and Chromate Fasteners
• Zinc and Yellow Chromate Fasteners
• Zinc Plated Fasteners

 

Thread Style of Nickel Alloy bolts

 

Ni 201 Nut Bolt Common Types And Styles

Unified Inch Coarse and Fine Threads
Steel Bolts Size		Threads per Inch
Frac. [No.]	Decimal	UNC	UNF
1/8 [#6]	0.1380	32	40
5/32 [#8]	0.1640	32	36
3/16 [#10]	0.1900	24	32
1/4	0.2500	20	28
5/16	0.3125	18	24
3/8	0.3750	16	24
7/16	0.4375	14	20
1/2	0.5000	13	20
9/16	0.5625	12	18
5/8	0.6250	11	18
3/4	0.7500	10	16
7/8	0.8750	9	14
1	1.0000	8	12, 14
1 1/8	1.1250	7	12
1 1/4	1.2500	7	12
1 3/8	1.3750	6	12
1 1/2	1.5000	6	12
1 3/4	1.7500	5	-

 

Head Style Uns N02201 Bolts

 

Nickel Alloy Stud Bolts Din German Standard

Metric Form A Washers (DIN 125) Metric Nyloc Hex Thin Nuts (DIN 985) Metric Penny Washers Metric Hex Thin Nuts (DIN 439) Metric Hex Nuts (DIN 934) Metric Flange Nuts (DIN 6923) Metric Washers for Cheesehead (DIN 433) Metric Form C Washers Metric Square Nuts (DIN 557) Metric Wing Nuts (DIN 315) Metric Type M Washers Metric Spring Wave Washers (DIN 137)

DIN 931 & 933 - For High Tensile Bolts. Metric Spring Washers (DIN 7980) Metric Dome Nuts (DIN 1587) Metric Nyloc Hex Nuts (DIN 982) Metric Shakeproof (int) Washers (DIN 6797) DIN 934 - For High Tensile Nuts and other German Standards. Metric DIN 9021 Washers Metric Form B Washers (DIN 125/B) Metric Dome Nyloc Nuts (DIN 986) DIN 939– For High Tensile Studs. Metric Lifting Eye Nuts (DIN 582)

 

Technical Dimensions of Nickel 200 Washers

DIA	M16	M27	M22	M20	M24	M36	M30
Tolerance for OD Minus(-)	1.06					1.09
HARDNESS FOR PL. WASHER	35 TO 45 HRC
Hardness for Hot Dip Galvd washer	26 HRC
Inner Dia (Min) d1	18	22	24		26	30	33
Thickness (S)	3.01 TO 4.06
Outer Dia (Max) d2	34	42	44		50	56	60
Tolerance for ID Plus(+)	0.043	0.052					0.062

 

Nickel 201 Socket Head cap screw uses

A nickel 201 socket head cap is a fastener that is a barrel-shaped cylindrical head containing a hexagonal socket. These screws are preferred in applications where the availability of space is less. The components possess internal wrenching capabilities, which allow them to be used in applications where external wrench components aren’t desirable. They are also used in critical vehicle applications, mining machinery, tools, dies, earthmoving, and other engineering applications.

 

Nickel Alloy Socket head Cap Screw Dimensions

D Nominal Size	Body Of Diameter		Head Thick.		Flats Acrosses		Bolts Corners Acrosses
	D (Maxi.0)	D (Minimum)	H (Maxi.0)	H (Minimum)	F (Maxi.0)	F (Minimum)	C (Maxi.0)	C (Mini.0)
M10	10.000	9.078	6.063	6.017	17.000	15.073	18.048	17.077
M12	12.000	11.073	7.076	4.024	19.000	17.073	20.078	20.003
M14	14.000	13.073	9.009	8.051	22.000	20.067	24.025	23.035
M16	16.000	15.073	10.032	9.068	24.000	23.067	27.071	26.075
M20	20.000	19.067	12.088	12.012	30.000	29.016	34.064	32.095
M24	24.000	23.067	15.044	14.056	36.000	35.000	41.057	39.055
M30	30.000	29.067	19.048	17.092	46.000	45.000	53.012	50.085
M36	36.000	35.061	23.038	21.063	55.000	53.080	63.051	60.079
M42	42.000	41.038	26.097	25.003	65.000	62.090	75.006	71.071
M48	48.000	47.038	31.007	28.093	75.000	72.060	86.060	82.076
M56	56.000	55.026	36.02	33.080	85.000	82.020	98.015	93.071
M64	64.000	63.026	41.032	38.068	95.000	91.080	109.070	104.065
M72	72.000	71.026	46.045	43.055	105.000	101.040	121.024	115.060
M80	80.000	79.026	51.058	48.042	115.000	111.000	132.072	126.054
M90	90.000	89.013	57.074	54.026	130.000	125.050	150.011	143.007
M100	90.000	99.013	63.09	60.010	145.000	140.000	167.043	159.060

 

Alloy 200 Bolts Allowable Shear Stress Chart

Type	Nickel Alloy Fasteners Specification & Condition	Shear Stress (ksi)	Finish	0.2% Yield Stress (ksi)	Dia (in.)	Nickel Alloy Fasteners Min. Tensile Requirement
		Threads in Shear Plane				No Threads in Shear Plane	Tensile Strength (ksi)
302 304 316	Condition A (Annealed) in ASTM A276-71	12.6	Cold Finished Fasteners	45		18	90
302 304 316	Condition A (Annealed) in ASTM A276-71 Class 1 (solution treated) in ASTM A193-71	10.5	Hot Finished Fasteners	30	all	15	75
302 304 316	Condition B (cold-worked) in ASTM A276-71 Class 2 (solution treated and strain hardened) in ASTM A193-71*	17.5	Cold Finished Fasteners	100		25	125

 

Nickel 201 Stud Bolts

Stud bolts of nickel 201 are fully threaded fasteners that don’t have a head. These bolts comprise of two nuts on each of the sides of the bolt to compensate for the head. Depending on their design, these bolts can be classified as continuous treaded, tap end, double end, flange stud bolts, welding studs, and double end stud bolts with reduced shank. These nickel alloys are low carbon modules that offer superior corrosion resistance across a range of environments.

 

Nickel Alloy Stud bolts Dimensions

Diameter Of Nickel Alloy Stud Bolts	Nickel Alloy Studs Bolts
	Plain
	UNC	8UN
1/2 Inch	19568	-
5/8 Inch	19569	-
3/4 Inch	19570
7/8 Inch	19571	-
1 Inch	19572	-
11/8 Inch	19573	13979
11/4 Inch	19574	13980
13/8 Inch	19656	13981
11/2 Inch	19657	13982
13/4 Inch	19658	13983
2 Inch	19659	13984

 

Application of Nickel 200 Threaded Rod

A threaded nickel 200 rod is a pin that is utilized to fasten material in place. These rods can also be utilized to provide stability to different modules of steel and wood. Their unique properties allow them to be utilized in food processing, pulp, and paper, pharmaceutical industries. Their excellent tolerances and strengths make them suitable in oil and gas, petrochemicals, chemical, power plants, aerospace, and refining industries.

 

Dimensions of Nickel 200 Threaded Rod

D	P (mm)	D	P (mm)
M For Metric 2	0.04	M For Metric 20	1.05/2.05
M For Metric 2.05	0.045	M For Metric 22	1.05/2.05
M For Metric 3	0.05	M For Metric 24	2/3
M For Metric 3.05	0.06	M For Metric 27	2/3
M For Metric 4	0.07	M For Metric 30	2/3.05
M For Metric 5	0.08	M For Metric 33	2/3.05
M For Metric 6	1	M For Metric 36	3/4
M For Metric 8	1/1.025	M For Metric 39	3/4
M For Metric 10	1/1.025/1.05	M For Metric 42	3/4.05
M For Metric 12	1.025/1.05/1.075	M For Metric 45	3/4.05
M For Metric 14	1.05/2	M For Metric 48	3/5
M For Metric 16	1.05/2	M52	3/5
M18	1.05/2.05

 

UNS N02200 Fasteners Physical Properties

Density	8.902gm/cc
Melting Point	1453 oC
Boiling Point	2732 oC
Thermal Conductivity	0.909 W/cm/K @ 298.2K
Electrical Resistivity	6.84 microhm-cm @ 20
Electronegativity	1.8 Paulings
Specific Heat	0.106 Cal/g/ K @ 25
Heat of Vaporization	91.0 K-Cal/gm atom at 2732 oC
Heat of Fusion	4.20 Cal/gm mole

 

Chemical Structure of Nickel Alloy u bolt

Nickel Alloy 200 Fasteners	Ni	C	Mo	Mn	Si	Fe	P	S	Cu	Cr
	99.0 min	0.15 max	-	0.35 max	0.1 max	0.4 max	-	0.01 max	0.25 max	-

 

Mechanical Analysis of Nickel Alloy washers

Density	Melting Point	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
8.9 g/cm3	1446 °C (2635 °F)	Psi – 21500 , MPa – 148	Psi – 67000 , MPa – 462	45 %

 

Material Equivalent of Alloy 200 Self Tapping Screws

STANDARD	UNS	WERKSTOFF NR.	AFNOR	EN	JIS	BS	GOST
Nickel Alloy 200 Fasteners	N02200	2.4066	N-100M	Ni 99.2	NW 2200	NA 11	НП-2