Monel Plate supplier in India

Cold Rolled ASTM B127 Monel Sheet stockist in Mumbai, Check Monel Foil Price in India

 

Monel Plate
Monel Plate
Monel Alloy Sheet
Monel Alloy Sheet
ASTM B127 Monel Strip Tape
ASTM B127 Monel Strip Tape

 

We help you to save your cost by providing exact size of Asme Sb127 Monel Hot Rolled Plate and Coil

We, Siddhagiri Metals and Tubes are leading Monel plate suppliers and we have a huge stock of Monel sheet, in so many different sizes and thicknesses, the likes of which you will find hard to get anywhere else. For us, there is no such thing as a small enquiry or a big enquiry for Monel plate. You can be sure that whatever is the size of your enquiry, we would be most happy to discuss it with you and help you. But that’s not all, if you have any special requirements and they are not available in our stock, you need not worry as we will supply that to you direct from our mill. We also have the infrastructure to supply ultra-thin gauge and thin gauge Monel strip and foil products which have been rolled down to 2 microns.

Monel Plate is manufactured from an alloy of Nickel-Copper and it exhibits very strong resistance to corrosion in various kinds of alkaline and acidic environs and it is very suitable for use in reducing conditions. Our bright annealed Monel sheet, so as to ensure that it has a mirror finish, we, Siddhagiri Metals and Tubes, continuously bright anneal it in an atmosphere that is inert. Monel Sheet possess very good thermal conductivity and ductility. Monel Strip is ideal for use in reducing conditions. Monel Clad Plate is in big demand in various kinds of sea water applications. Monel Alloy Plate are much sought after for use in various kinds of applications and industries like hydro-carbon processing, pumps, chemical processing, valves, heat exchangers, marine engineering, etc. leading monel sheet suppliers

We, Siddhagiri Metals and Tubes, manufacture and stock Monel Strips in a large range of thicknesses and sizes and with our cutting service, we give our clients FREE up to 10 cuts per length. And that’s not all, we support this service with profiling, punching, laser cutting and shearing. No matter what size and thickness you need Monel Strips in, rest assured that we can cut them to meet your exact specifications. Monel can be procured from us in various forms such as the likes of Plain Sheets, Clad Plates, Flat Sheets, Plates, Rolling Sheets, Strips, Sheets, Rolling Plates, Shim Sheets, Rolls, Flat Shims, Foils, Coils and Flats. No matter which part of the globe you might be based in, we, Siddhagiri Metals and Tubes, assure you of a timely and efficient delivery of all your needs of Monel Sheet. And we can give you this assurance, as we have our dealers based in all parts of the world, ensuring that we can give you a prompt service.

monel plate price is reflective of its vast use and its impact that leads to the proper industrial applications. Even though it is costlier than metals like steel etc, it provides a longer usability. Monel replaces all those metals that are prone to corrosion. Especially when exposed to a saltwater environment, some alloys are prone to oxidisation with time. In Monel Foil presence of nickel forms a non magnetic base and further allows the rust to stay off the plates. Bright Annealed Monel Sheet is also a great substitute for those metals which are not strength based and contain less amount of tensile and yield ability. The ideal application of monel plates can be witnessed in piping, shafts, strainers and much more. The monel plate weight calculator can further be used to determine the total weight in kilogram or pounds. We are manufacturer, exporter and supplier of the best Monel Coil in the world and our experience has made us a leader in metal industry.

Specification of Monel Plate / Sheet

Specification ASTM B127 / ASME SB127
standards and approvals
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
  • EN ISO 9445
  • ASTM A 480
  • ASTM A 959
  • ASME IID
Tolerances of width and thickness
  • EN 10258 (formerly DIN 59381)
  • EN 10151 Monel strip for springs
  • EN 10088 Monel strip (general)
Standard Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Cold rolled - 0.5-6.4 mm
  • Hot rolled - 3.0–10.0 mm
Thickness 0.1 to 100 mm Thk
Width 10-2500mm
Length 2m, 2.44m, 3m, or as required
Finish 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard
Stock available in form of Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Manufacturers Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO
Plasma profiles As per customer's drawings
Value added services Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.

 

B127 Monel Plate density
g/cm3 :8.80
lb/in.3 : 0.318

 

Monel Plate melting range
°F : 2370-2460
°C : 1300-1350

 

Our shipments of Monel Plate / Sheet in following locations in every three months

France, Qatar, Thailand, Europe  Nickel Based Alloy Monel Sheet Strip Coil Plate
Indonesia, Dammam -KSA, Belgium, Philippines  Monel Stainless Steel Plate (Monel 400 2.4360 Alloy 400)
USA, Malaysia, Finland, Bangladesh  Corrosion Resistant Monel Cladding Steel Pressure Vessel Plate
Germany, Czechia, Malaysia, Thailand  Monel 1219 X 2438 X 4.8mm Alloy Sheet Steel Plate
South Africa, Bahrain, Singapore  N04404 2.4867 Low Magnetic Monel 404 Plate
Saudi Arabia (KSA), South Africa, Brazil, Kuwait  Cold Rolled Nickel Based Alloy Monel 401 Plate
France, Philippines, UK, Australia, Nigeria  8mm Monel Plate
Italy, Chile, Singapore, Iran  1219 X 2438 X 4.8mm ASTM B127 Steel Plate
Malaysia, Oman, UAE, Hong Kong  Nickel Based Alloy Monel K-500 Iron Nickel Steel Strip Coil Sheet Plate
Malaysia, Netherlands, Dubai, Russia  Monel K500 Plate for Valve 5*200mm
Turkey, United Arab Emirates (UAE), Malaysia, Norway  Hot Cold Rolled Customized Monel Nickle Alloy 4X8 Steel Sheet Plate
Europe, United Kingdom -UK, UAE, Malaysia Uns N05502 AMS 4677 Monel 502 Nickel Copper Alloy Plate for Pump Shafting
Spain, Egypt, UK, Mexico  Monel R405 Stainless Steel Plate Corrosion Resistant Alloy Steel Plate
Malaysia, Philippines, Singapore, Canada  Nickel Alloy 2.4375 (monel K500) Seamless Steel /Plate
Taiwan, Malaysia, Philippines, Los Alamos -Mexico   ASME Sb127 Monel Sheet

 

Monel Plate suppliers

Monel Sheet

Monel Sheet

SB 127 Monel Plate

SB 127 Monel Plate

Monel B127 Coil

Monel B127 Coil

B127 Monel Foil

B127 Monel Foil

Monel Strip

Monel Strip

SB 127 Monel Shim Sheet

SB 127 Monel Shim Sheet

Monel B127 Strip Tape

Monel B127 Strip Tape

B127 Monel Chequered Plate

B127 Monel Chequered Plate

 

Check weight, size chart and Price list of Alloy Monel Strips and Foil Ex Mumbai, get Monel Sheet Weight Calculator

 

Check SB 127 Monel Plate Price List

Price list of Monel Plate in India B127 Monel Plate Price in India (INR) ASME SB 127 Monel Plate Price in UK Pound sterling (Kg) Monel Plate Price in UAE Dirham (Kg)
MONEL 400 PLATE ANNEALED CONDITION (M) SB127, 16 X 2500 X 6700MM) INR 1,257/Kg 13.59 UK Pound sterling 64.91 UAE Dirham

Chemical Equation of B127 Monel Foil

Designation C% Co% Cr% Mo% Ni% V% W% Ai% Cu% Nb/Cb Ta% Ti% Fe% Sonstige Autres-Other %
Monel 400 0.12 - - - 65.0 - - - 32.0 - - 1.5 Mn 1.0
Monel 401 0.10 - - - 43.0 - - - 53.0 - - 0.75 Si 0.25; Mn 2.25
Monel 404 0.15 - 52.0-57.0 - - 0.05 rest/bal - - 0.50 Mn 0.10; Si 0.10;S o.024
Monel 502 0.10 - - - 63.0-17.0 - - 2.5-3.5 rest/bal - 0.50 2.0 Mn 1.5;Si 0.5; S 0.010
Monel K 500 0.13 - - - 64.0 - - 2.8 30.0 - 0.6 1.0 Mn 0.8
Monel R 405 0.15 - - - 66.0 - - - 31.0 - - 1.2 Mn 1.0; S 0.04

 

Buy your sizes from our Monel Alloy Perforated Sheet and Chequered Plate Ready Stock

 

Mechanical Characteristics of Monel B127 Coil

Tensile strength, Ultimate 550 Mpa
Tensile strength, Yield 240 Mpa
Elongation at Break 48%

Material Equivalent of SB 127 Monel Shim Sheet

STANDARD
WERKSTOFF NR.
UNS
JIS
BS
GOST
AFNOR
EN
Monel 400
2.4360
N04400
NW 4400
NA 13
МНЖМц 28-2,5-1,5
NU-30M
NiCu30Fe
Monel K500
2.4375
N05500

 

Get Monel Orifice Plate cut to sizes, Supplier of Monel Shim Sheet as per International standard

 

Dimension of Monel Alloy Plate

Metric Dimensions

Surface finish

Thickness (mm)

Width (mm)

2B – Cold rolled, heat treated, pickled, skin passed

0.25–8.0

max. 2032

2D – Cold rolled, heat treated, pickled

0.4–6.35

max. 1524

2E – Cold rolled, heat treated, mechanically descaled

0.4–8.0

max. 2032

2R – Cold rolled, bright annealed

0.25–3.5

max. 1524

2H – Work hardened

0.4–6.35

max. 1524

Polished, brushed

0.5–4.0

max. 1524

Imperial Dimensions

Surface finish

Gauge (in)

Width (in)

2B – Cold rolled, heat treated, pickled, skin passed

10–24

max. 72*

2D – Cold rolled, heat treated, pickled

12–24

max. 60

BA Mexinox only

18–28

max. 48

Polished (not brushed)

11–24

max. 60

Temper rolled Mexinox only

13–29

max. 48

 

Monel Sheet Sizes

Sizes in Inches Sizes in mm
.125" 3.18mm
.134" 3.40mm
.156" 3.96mm
.187" 4.75mm
.250" 6.35mm
.312" 7.92mm
.375" 9.53mm
.500" 12.7mm
.625" 15.9mm
.750" 19.1mm
.875" 22.2mm
1" 25.4mm
1.125" 28.6mm
1.250" 31.8mm
1.500" 38.1mm
1.750" 44.5mm
2" 50.8mm
2.500" 63.5mm
3" 76.2mm

 

Monel Shim Sheet Weight per Unit

Thickness Alloy Plate Weight per Unit Area Density
3/16 inches Monel 0.06000 lbs/in²42.184176 kg/m² 0.315 lbs/in³8.72 g/cm³
1/4 inches Monel 0.08 lbs/in²56.245568 kg/m² 0.315 lbs/in³8.72 g/cm³
3/8 inches Monel 0.121 lbs/in²85.0714216 kg/m² 0.315 lbs/in³8.72 g/cm³
1/2 inches Monel 0.161 lbs/in²113.1942056 kg/m² 0.315 lbs/in³8.72 g/cm³
5/8 inches Monel 0.196 lbs/in²137.8016416 kg/m² 0.315 lbs/in³8.72 g/cm³
3/4 inches Monel 0.235 lbs/in²165.221356 kg/m² 0.315 lbs/in³8.72 g/cm³
7/8 inches Monel 0.274 lbs/in²192.6410704 kg/m² 0.315 lbs/in³8.72 g/cm³
1 inches Monel 0.313 lbs/in²220.0607848 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/4 inches Monel 0.391 lbs/in²274.9002136 kg/m² 0.315 lbs/in³8.72 g/cm³
1 1/2 inches Monel 0.47 lbs/in²330.442712 kg/m² 0.315 lbs/in³8.72 g/cm³
1 3/4 inches Monel 0.549 lbs/in²385.9852104 kg/m² 0.315 lbs/in³8.72 g/cm³
2 inches Monel 0.627 lbs/in²440.8246392 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/4 inches Monel 0.705 lbs/in²495.664068 kg/m² 0.315 lbs/in³8.72 g/cm³
2 1/2 inches Monel 0.784 lbs/in²551.2065664 kg/m² 0.315 lbs/in³8.72 g/cm³
2 3/4 inches Monel 0.862 lbs/in²606.0459952 kg/m² 0.315 lbs/in³8.72 g/cm³
3 inches Monel 0.941 lbs/in²661.5884936 kg/m² 0.315 lbs/in³8.72 g/cm³

 

Monel Plate Ready stock

Monel Chequered Plate Monel B127 Quarto Plate
SB 127 Monel Plate B127 Monel Rolling Plate
Monel B127 Hot Rolled Plate Monel ASTM B127 Perforated Plate
B127 Monel Cold Rolled Plate ASTM B127 Monel Bbq Plate
Monel ASTM B127 Plate 2b Finish Monel Metal Diamond Plate
ASTM B127 Monel Plate Mill Finish High Nickel Monel Thin Plate
Monel Metal Clad Plate Monel Alloy Tisco Plate
High Nickel Monel Chequer Plate High Temperature Monel Tread Plate
Monel Alloy Checker Plate Monel Steel Polished Plate
High Temperature Monel Plate Mirror Finish High Temp Monel Chequered Plate
Monel Steel Plate Brushed Finish Monel Nickel Alloy Hot Rolled Sheet
High Temp Monel 10mm Plate Nickel Alloy Monel Cold Rolled Sheet
Monel Nickel Alloy 1/4 Inch Plate Steel Monel Perforated Sheet
Nickel Alloy Monel Custom Cut Plate Nickel Monel Sheet
Steel Monel Checkered Plate Monel Laser Cut Plate
Nickel Monel Embossed Plate SB 127 Monel Plasma Cutting Plate

 

Stock List of Monel Alloy Plate

Alloy Product form Dimension
MONEL (66 Ni/34 Cu) Sheet; cold rolled, annealed 0.6x914x2440 mm, 11.5 kg/pc
MONEL (66Ni/34Cu) Sheet; cold rolled, annealed 0.9x1220 mm x coil, 9.7 kg/m
MONEL (66Ni/34Cu) Sheet; cold rolled, annealed 1.0x1000x2000 mm, 17.5 kg/pc
MONEL (66 Ni/34 Cu) Sheet; cold rolled, annealed 1.6x1200x3000 mm, 50.7 kg/pc
MONEL (66 Ni/34 Cu) Sheet; cold rolled, pickled, annealed 2.0x1200x3000 mm, 64 kg/pc
MONEL (66 Ni/34 Cu) Sheet; cold rolled, soft annealed, descaled, sheared 3.0x1220x3000 mm, 97 kg/pc
MONEL (66 Ni/34 Cu) Plate; hot rolled, annealed 4.0x2000x0 mm, 281.5 kg/pc
MONEL (66 Ni/34 Cu) Plate; hot rolled, annealed, descaled 5.0x2x6000 mm, 640 kg/pc
MONEL (66 Ni/34 Cu) Plate; hot rolled, soft annealed, descaled 12.0x1495x2000 mm, 309 kg/pc
MONEL (66 Ni/34 Cu) Plate; hot rolled, descaled, annealed 20.0x1200x2000 mm, 413 kg/pc
MONEL 008,0 0 x 1000 plate 8.0x1000x0 mm, 144,3 kg/St.


Application of Monel Foil

  • Jet Engine exhaust systems
  • Sour gas production tubes
  • Motor racing exhaust systems
  • Chemical Processing
  • Chimney Linings
  • Aerospace equipment
  • Nuclear waste reprocessing equipment