A number of sheets made up of different alloys are available throughout the world. A nickel-copper alloy that is hardened by precipitation is Alloy K500 Sheet. It has the added advantage of strength and toughness. These magnifying properties of the DIN 2.4375 strip are obtained by adding the element of aluminum and titanium to the alloy. This is then passed through thermal processing to impact precipitation. This entire process that Monel K500 Plate is put through is called age hardening or aging.
These Nickel Alloy K500 Shim Sheet resist corrosion in various marine and chemical environments. Furthermore, the ASTM B127 UNS N05500 coil also resists corrosion in non-oxidizing mineral acid, salts, and alkalis. They also have outstanding resistance to high velocity seawater.
Moreover, K500 Monel Perforated Sheet also resists sour-gas environments and displays excellent mechanical properties from sub-zero to high temperatures of about 480 degrees C. ASME SB127 Monel Alloy K500 foil made of a non-magnetic alloy and hence does not attract any metal.
The ability of the Alloy Monel K500 Chequered Plate to display high strength and low corrosion rate in seawater makes it suitable for shafts of centrifugal pumps in marine services. The pitting on these plates slows down after a rapid attack initially.
Monel K500 Superalloy Cold Rolled Sheets have thrice the yield strength and twice the tensile strength of alloy 400. It can be strengthened further by cold working before precipitation hardening. UNS N05500 Hot Rolled Plate is ductile and tough below the temperature range of 400 degrees F. but maintains strength up to 1200 degrees F.
Table of Content
Specification | ASTM B127 / ASME SB127 |
---|---|
standards and approvals |
|
Standard Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
Thickness | 0.1 to 100 mm Thk |
Width | 10-2500mm |
Length | 2m, 2.44m, 3m, or as required |
Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
Stock available in form of | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
Manufacturers | Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
Plasma profiles | As per customer's drawings |
Value added services | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Monel K500 Sheet
Alloy K500 B127 Plate
Monel K500 UNS N05500 Coil
ASTM B127 K500 Monel Foil
Monel K500 Strip
Alloy K500 B127 Shim Sheet
Monel K500 UNS N05500 Strip Tape
ASTM B127 K500 Monel Chequered Plate
Price list of Monel K500 Plate in India | ASTM B127 K500 Monel Plate Price in India (INR) | Alloy K500 B127 Plate Price in UK Pound sterling | Monel K500 UNS N05500 Plate Price in UAE Dirham |
---|---|---|---|
SB127 MONEL K500 PLATE ANNEALED CONDITION (M), 16 X 2500 X 6700MM) | INR 1,357/Kg | 14 UK Pound sterling | 65 UAE Dirham |
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
STANDARD | WERKSTOFF NR. | UNS |
Monel K500 | 2.4375 | N05500 |
Monel K500 Chequered Plate | Monel K500 UNS N05500 Quarto Plate |
Alloy K500 B127 Plate | ASTM B127 K500 Monel Rolling Plate |
Monel K500 UNS N05500 Hot Rolled Plate | Monel K500 Alloy Perforated Plate |
ASTM B127 K500 Monel Cold Rolled Plate | 2.4375 Monel K500 Bbq Plate |
Monel K500 Alloy Plate 2b Finish | Monel Alloy K500 Diamond Plate |
2.4375 Monel K500 Plate Mill Finish | Alloy K500 Monel 2.4375 Thin Plate |
Monel Alloy K500 Clad Plate | Monel K500 ASTM B127 Tisco Plate |
Alloy K500 Monel 2.4375 Chequer Plate | UNS N05500 Monel K500 Tread Plate |
Monel K500 ASTM B127 Checker Plate | Monel 2.4375 Polished Plate |
UNS N05500 Monel K500 Plate Mirror Finish | 2.4375 Monel K500 Chequered Plate |
Monel 2.4375 Plate Brushed Finish | Monel K500 Steel Hot Rolled Sheet |
2.4375 Monel K500 10mm Plate | ASTM B127 Monel Grade K500 Cold Rolled Sheet |
Monel K500 Steel 1/4 Inch Plate | Monel K500 Grade Perforated Sheet |
ASTM B127 Monel Grade K500 Custom Cut Plate | B127 Monel K500 Nickel Sheet |
Monel K500 Grade Checkered Plate | Monel K500 Laser Cut Plate |
B127 Monel K500 Nickel Embossed Plate | Alloy K500 B127 Plasma Cutting Plate |
Metric Dimensions | ||
---|---|---|
Surface finish | Thickness (mm) | Width (mm) |
2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
2H – Work hardened | 0.4–6.35 | max. 1524 |
Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions | ||
---|---|---|
Surface finish | Gauge (in) | Width (in) |
2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
BA Mexinox only | 18–28 | max. 48 |
Polished (not brushed) | 11–24 | max. 60 |
Temper rolled Mexinox only | 13–29 | max. 48 |