Monel Fasteners are widely used as they are one of the few materials available that can withstand contact with hydrogen fluoride, hydrofluoric acid, fluorine or derivatives of theirs. In fact, Monel 400 Bolts has such strong resistance, that it cannot even be affected by hydrofluoric acid, no matter what the concentration, even though it might be the boiling point of hydrofluoric acid. Monel 400 Bolts and Nuts has also been found to resist hydrochloric acids and sulfuric acids, under reducing conditions. In most industrial water applications and fresh water applications, Monel 400 Fasteners can resist pitting and stress corrosion cracking.
Table of Content
Monel 400 Hex Head Bolt are used in a wide number of applications such as in petroleum refining in storage and piping tanks, crude petroleum stills and alkylation units. Monel Metal Screws are also used as marine components in shipbuilding pumps, shafts, valves and in brackish water and in the sea. It is also used in oil and gas production in sour gas applications and in splashzones for offshore structures. Monel 400 Screw can also be found in use in water treatment in seawater desalination plant evaporators and in brine heaters. Monel 400 Threaded Rod is also used in chemical processing equipment in hydrochloric acid, dry chlorine service, fluorine, neutral and alkaline salt solutions, sulfuric acid, hydrofluoric acid, nonoxidizing halides, hydrogen fluoride and caustic alkalies.
We manufacture bolts, nuts, anti-theft bolts & nuts, studs, foundation bolts, U-bolts, plain and spring washers in Monel 400 material in India. Monel 400 Socket Head Cap Screws are most popular fastener & can come with large cylindrical heads that have recessed hex-shaped drives. Due to this quality these Monel 400 Screws are mainly in demand by the applications where clearance is limited, and sockets and wrenches can't be used. The size of a Monel 400 metric screws or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated "mm"). The size of Monel 400 nuts, will appear as diameter and pitch.
Standard | ASTM F467 / ASME SF467 |
---|---|
Size | M 02 to M 33 |
Length | 3 mm to 200 mm |
Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: | DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
SCOPE OF MANUFACTURE |
|
Dia | M6 to M64 (1/4" - 2.5") |
Length | 12 MM - 500 MM (Upto 20 Inch) |
IS | 1363, 1364 |
DIN | 931, 933 |
ISO | ISO 3506 |
Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
Finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
Production process | M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element |
Origin and service-region: | European, Origin of Western European. However projects with eastern origin are possible on request. |
Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fasteners Etc. |
Types | Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts |
Monel Alloy 400 Stud Bolts
ASTM F467 Monel 400 Bolts and Nuts
400 Monel Set Screws
Alloy 400 Lag Bolts
UNS N04400 Machine Screws
ASME SF467 Alloy 400 Hex Nuts
DIN 2.4360 Flat Washers
Nickel 400 Threaded Rod
Monel 400 / 2.4360/ N04400 HEX CAP SCREW / BOLT | US $0.10-$100.00 / Piece |
Monel 400 cotter pin bolt manufacturer | US $0.10-$5.00 / Piece |
Din975 High quality M8 Monel Alloy 400 bolt price per piece | US $0.50-$2.00 / Piece |
Monel 400 hex bolt and nut | US $0.01-$0.50 / Piece |
Din975 High quality M8 Monel 400 bolt price per piece | US $0.50-$2.00 / Piece |
High quality Monel 400 price stud bolts with hex nut | US $0.01-$2.00 / Piece |
Monel 400 UNS N04400 2.4360 Monel 400 stud bolt c/w 2 heavy hex nut | US $15.60-$19.00 / Pieces |
Cheap Monel 400 hex bolt and nut | US $0.04-$0.60 / Piece |
High quality M8 Monel 400 bolt price per piece | US $0.50-$2.00 / Piece |
Monel 400 UNS N04400 2.4360 Monel 400 12 Point Flange Bolt | US $3.20-$3.60 / Pieces |
China supplier best price Iso 4017 Monel 400 Hex Bolt And Nut | US $0.05-$1.00 / Piece |
Monel 400 UNS N04400 DIN/EN 2.4360 12 point bolt flange shoulder bolt U bolt eye bolt | US $10.50-$12.00 / Pieces |
M8~M72 Monel 400 alloy steel bolt price per piece | US $0.20-$2.00 / Piece |
UNS N04400 Monel 400 2.4360 Monel 400 Big NUT Heavy hex Nut | US $14.80-$15.60 / Pieces |
Monel 400 / 2.4360 / UNS N04400 hex nut 3/8-16 5/16-18 | US $0.20-$0.50 / Pieces |
Monel 400 | Ni | C | Al | Mn | Si | Fe | Cu | S | Co | Cr |
63.0 min | 0.3 max | 0.50 max | 2.0 max | 0.5 max | 1.0 – 2.5 | 28.0 – 34.0 | 0.02 max | – | – |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 35,000 , MPa – 240 | Psi – 80,000 , MPa – 550 | 40 % |
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
Monel 400 | N04400 | 2.4360 | NU-30M | NiCu30Fe | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 |
Monel 400 Screws Type | SIZE | GRADE | ASME | ISO | ASTM |
---|---|---|---|---|---|
Monel 400 Socket Head Cap Screws | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
Monel 400 Socket Low Head Cap Screws | M4 to M20 | 10.9 | |||
Monel 400 Socket Head Shoulder Screws | M6 to M24 | 012.9 | B18.3.3M | ||
Monel 400 Countersunk Socket Head Screws | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
Monel 400 Button Head Socket Screws | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
Monel 400 Flange Button Head Socket Screws | M3 to M10 | 012.9 | F835M | ||
Monel 400 Knurled Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Monel 400 Flat Point Socket Set Screws | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
Monel 400 Dog Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
Monel 400 Cone Point Socket Set Screws | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
Monel 400 Plain Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
Monel 400 Taper Pressure Plug | M8 to M22 | - |
Monel 400 Hex Head Bolts | Alloy 400 Hex Head Bolts |
400 Alloy Hex Head Bolts | 400 Monel Hex Head Bolts |
UNS N04400 Hex Head Bolts | WERKSTOFF NR. 2.4360 Hex Head Bolts |
ASTM F467 Monel 400 Hex Head Bolts | Monel 400 Square Bolts |
Alloy 400 Square Bolts | UNS N04400 Square Bolts |
ASTM F467 400 Monel Square Bolts | Monel 400 U Bolts |
Alloy 400 U Bolts | ASTM F467 400 Monel U Bolts |
Monel 400 Eye Bolts | UNS N04400 Monel Nuts Bolts |
WERKSTOFF NR. 2.4360 Eye Bolts | ASTM F467 400 Monel Eye Bolts |
Monel 400 T Bolts | Alloy 400 T Bolts |
WERKSTOFF NR. 2.4360 T Bolts | ASTM F467 400 Monel Nuts and Bolts |
Monel 400 Hex Bolts | Alloy 400 Hex Bolts |
400 Alloy Hex Bolts | 400 Monel Hex Bolts |
WERKSTOFF NR. 2.4360 Hex Bolts | ASTM F467 400 Monel Hex Bolts |
Monel 400 Lag Bolts | Alloy 400 Lag Bolts |
ASTM F467 400 Monel Lag Bolts | Monel 400 Counter sunk Bolts |
Alloy 400 Counter sunk Bolts | UNS N04400 Counter sunk Bolts |
WERKSTOFF NR. 2.4360 Counter sunk Bolts | ASTM F467 400 Monel Nuts and Bolts |
Monel 400 Hex Head Nut | Alloy 400 Hex Head Nut |
UNS N04400 Hex Head Nut | WERKSTOFF NR. 2.4360 Hex Head Nut |
Monel 400 Square Nut | Alloy 400 Nut Bolt |
UNS N04400 Square Nut | WERKSTOFF NR. 2.4360 Square Nut |
Monel 400 Lock Nut | Alloy 400 Lock Nut |
400 Alloy Lock Nut | 400 Monel Lock Nut |
UNS N04400 Lock Nut | WERKSTOFF NR. 2.4360 Lock Nut |
ASTM F467 400 Monel Lock Nut | Monel 400 Eye Nut |
Alloy 400 Eye Nut | UNS N04400 Eye Nut |
WERKSTOFF NR. 2.4360 Eye Nut | Monel 400 wing Nut |
Alloy 400 wing Nut | UNS N04400 wing Nut |
WERKSTOFF NR. 2.4360 wing Nut | Monel 400 T Nut |
Alloy 400 T Nut | UNS N04400 Rings |
WERKSTOFF NR. 2.4360 Nut Bolt | ASTM F467 400 Monel Springs |
Monel 400 Panel Nut | Alloy 400 Panel Nut |
UNS N04400 Panel Nut | WERKSTOFF NR. 2.4360 Panel Nut |
ASTM F467 400 Monel Panel Nut | Monel 400 Coupling Nut |
Alloy 400 Coupling Nut | UNS N04400 Monel 400 Nuts and Bolts |
WERKSTOFF NR. 2.4360 Threaded Rod | ASTM F467 Monel 400 Coupling Nut |
Monel 400 Dome Nut | Alloy 400 Dome Nut |
Flange, Size |
B16.5 Class 150 RF/ Ring Gaskets |
B16.5 Class 150 FF/ Full Face Gaskets |
||||||||
---|---|---|---|---|---|---|---|---|---|---|
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
Torque / Round (ft-lbs) |
Stud Bolts Tighten Sequence |
|||||||
1st |
2nd |
Final |
Dwg/No. |
Bolt Size |
1st |
2nd |
Final |
Dwg*/No. |
Bolt Size |
|
1/2″ |
10 |
20 |
30 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
3/4″ |
13 |
27 |
40 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1″ |
15 |
30 |
50 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1-1/4″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
1-1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
20 |
40 |
60 |
4-bolt |
1/2″ |
2″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
2-1/2″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
3″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
40 |
80 |
120 |
4-bolt |
5/8″ |
3-1/2″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
4″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
40 |
80 |
120 |
8-bolt |
5/8″ |
5″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
6″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
8″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
60 |
120 |
200 |
8-bolt |
3/4″ |
10″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
12″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
95 |
190 |
320 |
12-bolt |
7/8″ |
14″ |
147 |
294 |
490 |
12-bolt |
1″ |
147 |
294 |
490 |
12-bolt |
1″ |
16″ |
147 |
294 |
490 |
16-bolt |
1″ |
147 |
294 |
490 |
16-bolt |
1″ |
18″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
213 |
426 |
710 |
16-bolt |
1-1/8″ |
20″ |
213 |
426 |
710 |
20-bolt |
1-1/8″ |
213 |
426 |
710 |
20-bolt |
1-1/8″ |
24″ |
300 |
600 |
1,000 |
20-bolt |
1-1/4″ |
300 |
600 |
1,000 |
20-bolt |
1-1/4″ |
APPROX. WEIGHT IN KGS FOR 100 NOS |
|||||||||||
SIZE | PLAIN PUNCHED WASHER, IS:2016 | HEAVY WASHER, IS:6610 | MACHINED WASHER, IS:2016 | SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72, DIN : 7980 | Size (Inches) | PLAIN PUNCHED WASHER, BS:3410 TABLE 7 | |||
MACHINED | HIGH STRENGTH, FRICTION GRIP | ||||||||||
FOR, CHANNELS IS:5372-75 | FOR, I-BEAM IS:5374-75 | TYPE-B, (CHANNELS) IS : 6649-85 | TYPE-C, ( I-BEAMS ) IS : 6649-85 | ||||||||
M-3 | 0.01 | 0.01 | |||||||||
M-4 | 0.02 | 0.02 | |||||||||
M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||
M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||
M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||
M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 |
M-14 | 0.82 | 0.60 | 0.38 | ||||||||
M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 |
M-18 | 1.27 | 0.97 | 0.66 | ||||||||
M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 |
M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||
M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 |
M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 |
M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 |
M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 |
M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||
M-52 | 31.90 | 33.00 | 18.20 | ||||||||
M-56 | 47.90 | 19.30 | |||||||||
M-60 | 51.60 | 20.30 | |||||||||
M-64 | 55.40 | 21.80 | |||||||||
M-68 | 57.40 | ||||||||||
M-72 | 63.40 | 24.00 |
MM THREADS AS PER IS 1363/67 | ||||||||||
APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
LENGTH | DIAMETER | |||||||||
M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
200 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
320 mm | 31.646 | 56.818 | 92.593 | |||||||
340 mm | 33.557 | 60.241 | 98.039 | |||||||
360 mm | 35.211 | 63.291 | 104.167 | |||||||
380 mm | 37.037 | 66.667 | 108.696 | |||||||
400 mm | 39.063 | 69.444 | 113.636 |