Hex bolts are well known throughout the world for the ease of production and their suitability for every pocket. Various M12 Hex Bolt Dimensions are available throughout the world. An M12 coarse threaded nut is usually used with an M12 Hex Head Bolt. The letter M in it indicates that it uses metric thread and the number following it indicates the diameter of the bolt shaft. Which in this case is 12 millimeter.
The M12 Hex Bolt Head Dimensions are manufactured in such a way that the thread of the bolt and the nut match easily. M12 Hex Flange Bolt is the best alternative for applications that require the load to be spread across even without the use of circular flange or washers as we call them to be attached to them. This is possible due to the broader construction of the head at the edges.
M12 Hex Socket Head Bolt also known as Allan bolt is considered among those fasteners which cannot be tampered with and have more stability. The six-sided M12 Hex Bolt Socket Size and the size of the spanner or wrench need to correspond for it to bolt and unbolt easily. The M12 Hex Bolt can be fastened using torque as well. For dome shaped bolt like this the M12 the length is measure from the thickest part of the head to the tip. We provide you a wide variety of these bolts and the nuts to fit them. To ensure the quality of these bolts remains superior we put them through the various tests as well.
standard | ISO 10642 |
---|---|
British standards | BS 57 |
Size |
M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes |
Length | 3 mm to 200 mm |
Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: |
DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards, ANSI – American National Standards Institute |
DIN Standard | B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985 |
UTS – Unified Thread Standard | UNC, UNF, UNEF, UNS, NPT, NPTF |
Dimensions | ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded. |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Type | Pan/ Round/ Oval/ Hex Head/ Truss head |
Head | Pan head, flat head, oval head, hex head, phillips head |
Finish | Per ASTM A380/A380M |
Production process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing |
Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc. |
MOQ | 5 pieces |
Test Certificate: |
|
Free Samples | Yes |
Delivery time | Regular product is about 7-15 days, custom product will according to special requirement |
Payment Terms | T/T, Paypal, Western Union, L/C or Trade Assurance 30% deposit & balance before shipping |
d1d1 | k | e | s |
---|---|---|---|
M3 | 2 | 6.01 | 5.5 |
M4 | 2.8 | 7.66 | 7 |
M5 | 3.5 | 8.79 | 8 |
M6 | 4 | 11.05 | 10 |
M8 | 5.3 | 14.38 | 13 |
M10 | 6.4 | 18.9 | 17 |
M12 | 7.5 | 21.1 | 19 |
M14 | 8.8 | 24.49 | 22 |
M16 | 10 | 26.75 | 24 |
M18 | 11.5 | 30.14 | 27 |
M20 | 12.5 | 33.53 | 30 |
M22 | 14 | 35.72 | 32 |
M24 | 15 | 39.98 | 36 |
M27 | 17 | 45.2 | 41 |
M30 | 18.7 | 50.85 | 46 |
M33 | 21 | 55.37 | 50 |
M36 | 22.5 | 60.79 | 55 |
M42 | 26 | 71.3 | 65 |
M48 | 30 | 82.6 | 75 |
d1d1 | k | e | s |
---|---|---|---|
M3 | 2 | 6.01 | 5.5 |
M4 | 2.8 | 7.66 | 7 |
M5 | 3.5 | 8.79 | 8 |
M6 | 4 | 11.05 | 10 |
M8 | 5.3 | 14.38 | 13 |
M10 | 6.4 | 18.9 | 16 |
M12 | 7.5 | 21.1 | 18 |
M14 | 8.8 | 24.49 | 21 |
M16 | 10 | 26.75 | 24 |
M18 | 11.5 | 30.14 | 27 |
M20 | 12.5 | 33.53 | 30 |
M22 | 14 | 35.72 | 34 |
15 | 39.98 | 36 | |
M27 | 17 | 45.2 | 41 |
M30 | 18.7 | 50.85 | 46 |
M33 | 21 | 55.37 | 50 |
M36 | 22.5 | 60.79 | 55 |
M42 | 26 | 71.3 | 65 |
M48 | 30 | 82.6 | 75 |
Material
|
Standards
|
Grades
|
---|---|---|
Nickel Alloy |
ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
|
UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
|
Stainless Steel
|
ASTM / ASME A/SA 193 / 194
|
B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4
|
Alloy Steel
|
ASTM / ASME A/SA 193 / 194 GR
|
B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M
|
Duplex Steel
|
UNS NO. S 31803, S 32205
|
Range: M10 TO M100, LENGTH UPTO 5 METERS
|
Nonmetallic Materials:
|
Acrylic, Kel-F, Lexan, Polypropylene, Poly Vinyl Chloride, Teflon, Zytel 31, 101, 105 | |
High-Temp Alloys
|
Discaloy, 19-9 DL, 16-25-6, A286, Titanium, Nimonic 80, Mulitmet, Haynes 25, Greek Ascalloy, Unitemp 252, Udimet 500, Rene 41, Inco 700, Inco 901, Hastelloy X, 235, Waspaloy, RA 330 | |
Copper Base Alloys
|
Copper, Brasses: Yellow, Free-cut, Red, Naval, Bronze: Commercial, Phosphor, Silicon A & B, Aluminum, Silicon-Aluminum, Manganese, Ampco Alloys, Munitz Metal, Cupro-Nicles | |
Aluminum Alloys:
|
1100, 2011, 2014, 2017, 2024, 3003, 5052, 6053, 6061, 7075 | |
Trademarks:
|
Carpenter, Armco, INCO, Cabot, DuPont. | |
Finish:
|
Black Oxide, Zinc Plating, Hot Dip Galvanized |