Inconel Studs manufacturer in India

Alloy 718 Exhaust and Inconel Turbo Studs supplier in Mumbai in M8/ M10 metric sizes

 

Inconel Studs
Inconel Studs
Inconel Exhaust Studs
Inconel Exhaust Studs
Inconel Turbo Studs
Inconel Turbo Studs

 

Supplier and exporter of full race M8x1.25 Inconel Studs with copper nuts in all sizes and dimensions, view latest price list ex Mumbai

These Inconel studs will not stretch or break as the factory steel items do. This will prevent repeated repairs to the exhaust manifold as is common place with most CRD/Di and TD42 Patrols. These Inconel manifold studs are 10mm x 1.5 into the head and 1.25mm external thread pitch. Inconel exhaust studs offers superior resistance to fatigue from heat and pressure well above standard high tensile steel fasteners which ensures the correct clamping pressure is always applied during its service life. These inconel studs include B7, L7, B16, B8, B8M, stain hardened and many more. 

Inconel Studs is an externally threaded headless fastener. It one end is commonly mates with a standard nut and the other with a tapped component. It is nickel-based alloys that exhibit traits such as high resistance to oxidation, corrosion, carburization, crevice, pitting, corrosion cracking, and high temperature strength. M8 Inconel Studs are of different types such as tap end stud bolt, weld bolt, fully threaded stud bolt, double end stud bolt, clinch stud, Dowel screw and bonding stud, etc.

Inconel Turbo Studs are ideal for fitting any turbo to manifold or to replace the exhaust manifold studs in your head.It is corrosion-resistant superalloys which is widely useful in extreme environments where tremendous heat and corrosion resistance is supreme to the probity of the end product. M10 Inconel Studs are typically used in high temperature applications.It is widely useful for chemical processing, petrochemical, nuclear, marine and aerospace industries

Inconel Exhaust Studs will not stretch or break as the factory steel items do. These studs are 10mm x 1.5 into the head and 1.25mm external thread pitch. This will stop repairs to the exhaust manifold as is commonplace with most CRD and some Di Patrols. It provides good resistance to acids, such as nitric, sulfuric, phosphoric, and hydrochloric

 


Specification Format of Inconel Studs

Specifications
ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
Types of Inconel studs
  • Turbo studs
  • Weld studs
  • Exhaust studs
  • Manifold studs
Standards

IS, ANSI, ASTM DIN, ISO, JIS, GB, ASME, BS, UNI and all International Standards

DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute

  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Studs length are defined in ASME B16.5 standard
  • Hex nuts are defined in ASME B18.2.2
  • ASME B18.5
  • BS en iso 3506

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards

Inconel manifold studs
  • 10mm x 1.5 into the head
  • 1.25mm external thread pitch
Length
UPTO 1 METERS
Common uses CRD/Di and TD42 Patrols
Inconel studs grades Alloy 718, B7, L7, B16, B8, B8M, stain hardened etc
Threads: BSF, UNF METRIC, UNC, BSW or as required
Size
M10 TO M100
Finishing Zinc white, (yellow, black, blue), black oxide,
Geometry, Dacroment, anodizing, plated zinc-nickel, Stainless steel: Passivated
Self-Colour, nickel plated, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Stainless Steel, Sherardized, some special one like DACROMET and Mechanically Applied coating
Length 3 mm to 200 mm
Fasteners/ Bolts Size M8, M6, M30, M5, M2, M3, M10, M36 M2.5, M4, M12, M20, M14, M24, M16 to M160
Test Certificate as per EN 10204 / 3.1 Manufacturer Test Certificate
Process of Production hot forging M24-M100, M2-M24: Cold Froging, CNC and machining for Customized connecting element
Inconel Studs Surface Coating
  • Hot Dipped Galvanizing Coated Turbo Studs
  • Phosphate Coated Manifold Studs
  • Xylon Coated Turbo Studs
  • Cadmium Coated Exhaust Studs
  • Ptfe Coated Stainless Steel Turbo Studs
  • Zinc Coated Turbo Studs
  • Teflon Coated Exhaust Studs
Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe etc
raw materials of Source JSPL, Usha Martin, Tata Steel, Mukund Steel, RINL, Dhamm Steel etc.
Form Square, Hex, Threading as per Gauge, Round Etc.
Packing IN BULK: pallet, canton, carton / Small Boxs / pallet or customer request

View Prices of Inconel Turbo Studs

  • STUD W/2 HEAVY HEX NUT INCONEL 925 5/8-11X4 , 5/8-11 : 274 Rs
  • STUD W/2 HEAVY HEX NUT INCONEL 925 1/2-13X2-3/4 , 1/2 -13HEX NUT : 154 Rs

 

Check size chart with price list of inconel Exhaust Stud, call us to know more about Ready stock

Studs Length Table For 6b Flange Connections With "R" Gaskets

ACCOMMODATES
"R" TYPE GASKETS ONLY

STUD BOLT LENGTH TABLE
STUD BOLT LENGTH TABLE

LENGTH = 2( T + t + d ) + S + 2( P )

T= Total flange thickness.
t= Plus tolerence for flange thickness.
d= Heavy hex nut thickness.
S= Flange face standoff. (with "R" gasket)
P= Point Max. (1.5 X Pitch)

 

Chemical Properties of M10 Inconel Studs

Inconel Element (% By Mass)
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0–17.0 6.0–10.0 1.0 0.5 0.5 0.15 0.015
617 44.2–56.0 20.0–24.0 3.0 8.0–10.0 10.0–15.0 0.5 0.5 0.8–1.5 0.6 0.5 0.15 0.015 0.015 0.006
625 58.0 20.0–23.0 5.0 8.0–10.0 3.15–4.15 1.0 0.5 0.4 0.4 0.5 0.1 0.015 0.015
690 59.5 30 9.2 0.35 0.01 0.02 0.35 0.019 0.003
718 50.0–55.0 17.0–21.0 Balance 2.8–3.3 4.75–5.5 1.0 0.35 0.2–0.8 0.65–1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0–17.0 5.0–9.0 0.7–1.2 1.0 1.0 0.5 0.4–1.0 2.25–2.75 0.5 0.08 0.01

Mechanical Characteristics of Inconel Exhaust Studs

Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5

 

M8 Inconel Studs available with Test Certificates, check Dimensions and specification

 

Equivalent material of M8 Inconel Studs

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 600 N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600
Inconel 625 N06625 NA 21 NiCr22Mo9Nb 2.4856 NC22DNB4M ХН75МБТЮ NCF 625
Inconel 601 N06601 NA 49 NiCr23Fe 2.4851 NC23FeA XH60BT NCF 601
Incoloy 825 N08825 NA 16 NiCr21Mo 2.4858 NFE30C20DUM ЭП703 NCF 825

 

M10 Inconel Studs as well as Custom sizes Studs can be produced as per client drawing

 

Inconel Heavy Studs Weight Chart

MM THREADS AS PER IS 1363/67

APPROXIMATE WEIGHT IN KGS FOR 100 NOS

LENGTH

D      I      A      M      E      T      E      R

M 5

M 6

M 8

M 10

M 12

M 14

M 16

M 18

M 20

M 22

16 mm 0.448 0.743 1.590 3.211
20 mm 0.598 0.812 1.711 3.411 4.892
25 mm 0.660 0.897 1.871 3.660 5.252 8.170
30 mm 0.737 1.010 2.070 3.912 5.574 9.690 10.707 18.657
35 mm 0.804 1.120 2.271 4.223 5.974 10.000 11.416 16.026 19.608
40 mm 0.881 1.230 2.470 4.533 6.410 10.288 12.107 16.667 20.747
45 mm 0.958 1.340 2.671 4.840 6.859 10.504 12.821 17.241 21.739
50 mm 1.030 1.450 2.870 5.155 7.299 11.261 13.624 17.857 22.727 28.409
55 mm 1.560 3.071 5.464 7.740 11.628 14.409 18.868 23.810 30.120
60 mm 1.670 3.270 5.774 8.183 12.255 15.244 20.000 25.126 32.051
65 mm 1.781 3.472 6.083 8.621 12.626 16.026 21.008 26.455 34.014
70 mm 1.890 3.671 6.394 9.058 12.987 16.835 22.124 27.778 35.461
75 mm 2.000 3.873 6.702 9.506 13.228 17.606 23.256 29.070 39.063
80 mm 2.111 4.072 7.013 10.000 13.889 18.248 24.510 30.303 40.000
90 mm 4.472 7.634 10.917 14.925 19.841 26.042 33.113 41.667
100 mm 4.873 8.251 11.820 16.340 21.459 27.778 35.714 46.296
110 mm 8.881 12.723 17.730 23.041 31.250 38.168 47.170
120 mm 9.506 13.624 18.797 24.631 32.895 40.984 50.000
130 mm 10.101 14.535 20.000 26.316 34.722 43.478 52.632
140 mm 10.707 15.432 20.833 27.933 35.461 46.296 55.556
150 mm 11.312 16.340 22.222 29.412 37.594 48.544 58.824
160 mm 11.905 17.241 24.272 31.056 40.984 50.505 61.728
170 mm 12.500 18.116 32.680 53.191 64.935
180 mm 13.123 19.011 26.882 34.247 55.556 67.568
190 mm 13.736 19.920 35.971 58.140 70.423
200 mm 14.327 20.833 29.586 37.594 49.020 60.976 73.529
220 mm 15.528 22.624 40.650 65.789 79.365
240 mm 16.722 24.510 43.860 71.429 84.746
250 mm 17.301 25.381 45.455 74.627 87.719
260 mm 17.921 26.316 47.170 76.923 90.909
280 mm 19.157 28.090 50.505 81.967 98.039
300 mm 20.325 29.940 53.763 87.719 104.167
320 mm 31.646 56.818 92.593
340 mm 33.557 60.241 98.039
360 mm 35.211 63.291 104.167
380 mm 37.037 66.667 108.696
400 mm 39.063 69.444 113.636

 

Inconel Studs available Surface Coating

STUDS SURFACE COATINGS
Zinc Plating Stud
Chrome Plating Stud
Epoxy Coating Stud
Electro Polished Stud
Teflon Coating
Oxidized Stud
Passivation Stud Hot Dipped Galvanizing Stud
Mirror Buffed stud

 

Ready Stock of Inconel Studs:

Inconel Turbo Studs Zd30 Inconel Studs
Inconel Exhaust Studs Mx5 Inconel Studs
M10 Inconel Studs 8mm Inconel Studs
M10x1.25 Inconel Studs M10x1.25 Inconel Studs
Miata Inconel Studs Nissan Inconel Studs
M8 Inconel Studs Inconel 625 Stud Bolts
Inconel 718 Studs Inconel 718 Stud Bolts
Inconel Manifold Studs Inconel 625 Studs

 

Don't Forget to check our material supplied to Qatar, Malaysia and other countries in Europe and America

Philippines, Indonesia, Belgium, Dammam -KSA Exotic Alloy Inconel 625 Threaded Stud
Europe, France, Thailand, Qatar Fully Threaded Stud Inconel 601 C/W 2 X Heavy Hex Nut
Thailand, Germany,  Malaysia, Czechia Customized CNC Lathe Machining Inconel 718 Aerospace Threaded Studs
Bangladesh, USA, Finland, Malaysia Exotic Alloy Inconel X-750 Threaded Stud
Kuwait, Saudi Arabia (KSA), Brazil, South Africa Exotic Non Ferrous Nickle Alloy Studs
Singapore, South Africa, Singapore, Bahrain Exotic Alloy Incoloy 825 Threaded Stud
UK, Australia, Nigeria, Philippines Inconel Studs, Inconel 625, Uns N06625, 2.4856 Studs
Hong Kong, Malaysia, UAE, Oman Inconel 617 N06617 2.4663 DIN976 Stud Bolt
Iran, Italy, Singapore, Chile Inconel Turbo Studs
Norway, Turkey,  Malaysia, United Arab Emirates (UAE) M10 Inconel Studs
Russia, Malaysia, Dubai, Netherlands Inconel Exhaust Studs
Mexico, Spain, UK, Egypt M8 Inconel Studs