Inconel Sheet is a corrosion-resistant material that holds great protection to work in outrageous conditions. This forms a thick, stable and passivating oxide layer. This further protects the surface from any external attack. The Inconel Alloy Coils are specifically used for destructive applications. Inconel Cold Rolled Sheets comes under the category of the nickel-chromium family.
At the same time, Inconel Hot Rolled Plates holds several characteristics. Inconel Plate 718 also frames a proactive oxide layer, which makes it heat impervious to oxidation, pressure and erosion. The Asme Sb168 Inconel® Alloy Cr Plates works proficiently at the high-temperature applications where steel and aluminum capitulate to creep due to thermally induced crystal vacancies.
If you are looking for Inconel Plates, we are the leading Inconel Plate Supplier in India, and we supply the exact amount of Inconel Alloy Shim Sheet that you need. We hold a team that perform various tests to check all parameters and to avoid defects. As a result, we offer dimensionally precise Incoloy Perforated Sheet to our clients. Our offered Astm B168 Inconel Hr Plates comes in several forms: Coils, Rolls, Sheets, Shim Sheet, Strip, Flats, etc.
The dainty material can be used in power plants, atomic plants or gas and oil refineries. After manufacturing these Inconel Sheet/Plate, we perform various destructive and non-ruinous tests on the final Sheet/Plate. Being the reliable Inconel Plates Manufacturers in India, we are packing these Inconel Sheet/Plate with suitable packaging material and providing convenient delivery to our esteem clients. We are also offering doorstep delivery to our ideal buyers on time.
If you are looking for Inconel Plate suppliers in India, make sure you keep a few things in mind. Begin by comparing the inconel sheet price. You can do this by calculating the amount of sheets that you wish to buy. Once you know the amount based on the sizes, thickness and other specifications. If all is good, then ask for a quotation. If a company is offering very less price as compared to others, make sure you are in check of the quality by checking the standardisations. All authentic Inconel sheet suppliers follow this pattern and also give you good delivery time periods. Make sure the company has enough in their inventory, and only then place a large order to avoid any delays.
Siddhagiri offers Inconel clad plate of numerous grades like 600, 601, 625, X750 & 718. SB 443 Alloy 625 Strip is the composite plate multi-layered with carbon and low alloy steel plates which makes it corrosion resistant and ensure strength. As this super alloy Nickel Alloy 625 Coil is quite prone to hardening, it is advised to use low cutting speed and an appropriate load rate. Besides, it should also be made sure that the tool is in working mode at all times and not left idle, else its hardening property may affect the functionality.
Siddhagiri is passionate about manufacturing some of the best Inconel 718 Plate, which are increasingly popular all over the world due to their high quality, superior strength, corrosion resistance and other favourable properties. At Siddhagiri testing capabilities meet most external standards depending on Inconel Sheet applications and individual customer specifications. Inconel Alloy 718 DIN 2.4668 Plate other available forms are Inconel 718 Cold Rolled Plate, Inconel 718 Flat Plate, ASTM B670 Gr.718 Mirror Polished Plate, Inconel 718 Perforated Plate, ASME SB670 Inconel 718 Polished Plate, B670 Alloy 718 2D Plate, Inconel 718 Shim Plate, B670 718 Alloy Diamond Plate and Inconel 718 Chequered Plate etc.Inconel® 718 Plate is available in thicknesses ranging from .010 to .120". Inconel® 718 strip in coil from is available in lighter gauges up 24" wide.
We, Siddhagiri Metals and Tubes, are a leading Inconel 718 Plate Suppliers and we supply these Inconel Alloy 601 Plate to companies located in all parts of the world. No matter what your specifications are for Inconel 601 Strips, we can deliver them to you, to your exact specifications. Inconel Sheet Metal can be procured from us in various forms such as Foils, Shim Sheets, Rolling Plates, Sheets, Plates, Plain Sheets, Flat Shims, Clad Plates, Coils, Rolling Sheets, Flats, Rolls, Strips and Flat Sheets. We also have a very good cutting service, offering free, up to 10 cuts per length. We supply Inconel 601 Polished Plate in various thicknesses and sizes and we support this with shearing, punching, laser cutting and profiling.
We, Siddhagiri Metals and Tubes, have a huge stock of Inconel X750 Sheet , which can be obtained from us in many different grades. Plus, to ensure that all of our clients get a quick and efficient delivery of our Alloy 601 Plates, we have our dealers located in all parts of the world. Our dealers play a vital role in ensuring that our clients get inconel 617 plate , as per their precise requirements. For us, Siddhagiri Metals and Tubes, there is no such thing as a large enquiry or a small enquiry for Inconel 601 plates. Whatever is your requirement, we will be more than happy to talk it with you. For all your needs of Inconel 601 Plates, at the best market rates, be sure to call us.
Table of Content
| Specification | ASTM B168 / ASME SB168 |
|---|---|
| standards and approvals |
|
| Standard Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
| Thickness | 0.1 to 100 mm Thk |
| Width | 10-2500mm |
| Length | 2m, 2.44m, 3m, or as required |
| Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
| Stock available in form of | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
| Manufacturers | Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
| Plasma profiles | As per customer's drawings |
| Value added services | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
ASTM B168 Inconel Plate
Inconel Perforated Sheet
ASME SB168 Inconel Alloy Clad Plate
Inconel Shim Sheet
| Price list of Inconel Plate in India | Incone Alloy Plate Price in India (INR) | Inconel Plate Price in UK Pound sterling | Alloy Inconel Plate Price in UAE Dirham |
|---|---|---|---|
| .024 Thick 120x36 Inconel 718 Sheet Heat No.: Ht2553ek (Ni: 53.50%, Cr: 18.40%, Fe: 18.31%) | INR 7,507/Kg | 79.70 UK Pound | 390.06 UAE Dirham |
| Cold Formed Inconel 718 Sheet (718 Ann. 0.1875x36x120 Ams 5596) | INR 2,638/Kg | 28.01 UK Pound | 137.07 UAE Dirham |
| Hot Rolled Sb 168 Uns No6601 Inconel 601 Plate 70mm Thk, 2400mm X 2400mm | INR 1,614/Kg | 17 UK Pound sterling | 79 UAE Dirham |
| Inconel Alloy 601 (Uns N06601) Hr Plate Annealed, Descaled. Astm B168/asme Sb168 65mm Thk X 900mm X 1 | INR 1,758/kg | 19 UK Pound sterling | 86 UAE Dirham |
| Defective Inconel Plate Grade 601 | INR 594/Kg | 6 UK Pound sterling | 27 UAE Dirham |
Sheet - Imperial
| Size ft | Thickness in | Weight lbs/sheet |
| 10 x 3 | 0.0012 | 14.07 |
| 10 x 3 | 0.0014 | 17.02 |
| 10 x 3 | 0.0016 | 19.06 |
| 10 x 3 | 0.0018 | 22.01 |
| 10 x 3 | 0.0020 | 24.05 |
| 10 x 3 | 0.0022 | 27.00 |
| 10 x 3 | 0.0024 | 29.04 |
| 10 x 3 | 0.0028 | 34.04 |
| 10 x 3 | 0.0032 | 39.03 |
| 10 x 3 | 0.0036 | 44.02 |
| 10 x 3 | 0.0040 | 49.01 |
| 10 x 3 | 0.0047 | 57.07 |
| 10 x 3 | 0.0048 | 58.09 |
| 10 x 3 | 0.0050 | 61.03 |
| 10 x 3 | 0.0056 | 68.07 |
| 10 x 3 | 0.0063 | 77.03 |
| 10 x 3 | 0.0070 | 85.09 |
| 10 x 3 | 0.0078 | 95.07 |
| 10 x 3 | 0.0080 | 98.02 |
| 10 x 3 | 0.0090 | 110.04 |
| 10 x 3 | 0.0100 | 120.02 |
| 10 x 3 | 0.0098 | 120.02 |
| 10 x 3 | 0.0104 | 122.07 |
| 10 x 3 | 0.0118 | 144.08 |
| 10 x 3 | 0.0128 | 157.00 |
| 10 x 3 | 0.0157 | 192.06 |
| 10 x 3 | 0.0160 | 196.03 |
| 10 x 3 | 0.0176 | 215.09 |
| 10 x 3 | 0.0187 | 229.04 |
| 10 x 3 | 0.0197 | 241.07 |
| 10 x 3 | 0.0236 | 289.05 |
Sheet - Metric
| Thickness mm | Weight kg/sheet | Size m |
| 0.0300 | 4.07 | 2 x 1 |
| 0.0376 | 5.09 | 2 x 1 |
| 0.0400 | 6.03 | 2 x 1 |
| 0.0457 | 7.02 | 2 x 1 |
| 0.0500 | 7.09 | 2 x 1 |
| 0.0559 | 8.08 | 2 x 1 |
| 0.0600 | 9.04 | 2 x 1 |
| 0.0710 | 11.01 | 2 x 1 |
| 0.0800 | 12.06 | 2 x 1 |
| 0.0914 | 14.03 | 2 x 1 |
| 1.0000 | 15.07 | 2 x 1 |
| 1.0200 | 18.08 | 2 x 1 |
| 1.0220 | 19.02 | 2 x 1 |
| 1.0270 | 19.09 | 2 x 1 |
| 1.0420 | 22.03 | 2 x 1 |
| 1.0600 | 25.01 | 2 x 1 |
| 1.0780 | 28.00 | 2 x 1 |
| 2.0000 | 31.04 | 2 x 1 |
| 2.0030 | 31.09 | 2 x 1 |
| 2.0286 | 35.09 | 2 x 1 |
| 2.0500 | 39.03 | 2 x 1 |
| 2.0540 | 39.09 | 2 x 1 |
| 2.0640 | 41.04 | 2 x 1 |
| 3.0000 | 47.01 | 2 x 1 |
| 3.0250 | 51.00 | 2 x 1 |
| 4.0000 | 62.08 | 2 x 1 |
| 4.0060 | 63.07 | 2 x 1 |
| 4.0460 | 70.00 | 2 x 1 |
| 4.0760 | 74.07 | 2 x 1 |
| 5.0000 | 78.05 | 2 x 1 |
| 6.0000 | 94.02 | 2 x 1 |
Inconel Plate Gauge, Width and Length | Est. Wt. per Sheet | Weight Lbs. per Sq Ft. |
|---|---|---|
7GA (.01874") | ||
| 48 x 96 | 251.09 | 7.0871 |
| 48 x 120 | 314.08 | 7.0871 |
| 48 x 144 | 377.08 | 7.0871 |
10GA (.0135”) | ||
| 36 x 120 | 170.01 | 5.0670 |
| 48 x 96 | 181.04 | 5.0670 |
| 48 x 120 | 226.08 | 5.0670 |
| 60 x 120* | 283.05 | 5.0670 |
| 60 x 144* | 340.02 | 5.0670 |
| 72 x 120* | 340.02 | 5.0670 |
11 GA (.0120") | ||
| 36 x 96 | 121.00 | 5.0040 |
| 36 x 120 | 151.02 | 5.0040 |
| 36 x 144 | 181.04 | 5.0040 |
| 48 x 96 | 161.03 | 5.0040 |
| 48 x 120 | 201.06 | 5.0040 |
| 48 x 144 | 241.09 | 5.0040 |
| 60 x 120 | 252.00 | 5.0040 |
| 60 x 144 | 302.04 | 5.0040 |
| 72 x 120* | 302.04 | 5.0040 |
| 72 x 144* | 362.09 | 5.0040 |
12 Ga.0 (.0105") | ||
| 36 x 96 | 105.08 | 4.0410 |
| 36 x 120 | 132.03 | 4.0410 |
| 36 x 144 | 158.08 | 4.0410 |
| 42 x 120 | 154.04 | 4.0410 |
| 48 x 96 | 141.01 | 4.0410 |
| 48 x 120 | 176.04 | 4.0410 |
| 48 x 144 | 211.07 | 4.0410 |
| 60 x 96 | 176.04 | 4.0410 |
| 60 x 120 | 220.05 | 4.0410 |
| 60 x 144 | 264.06 | 4.0410 |
| 72 x 120* | 264.06 | 4.0410 |
| 72 x 144 | 317.05 | 4.0410 |
13 Ga (.0090") | ||
| 36 x 96 | 90.072 | 3.0780 |
| 36 x 120 | 113.04 | 3.0780 |
| 48 x 120 | 151.02 | 3.0780 |
14 Ga.0 (.0075") | ||
| 30 x 120 | 78.075 | 3.0150 |
| 36 x 96 | 75.060 | 3.0150 |
| 36 x 120 | 94.050 | 3.0150 |
| 36 x 144 | 113.04 | 3.0150 |
| 42 x 120 | 110.03 | 3.0150 |
| 42 x 144 | 132.03 | 3.0150 |
| 48 x 96 | 100.08 | 3.0150 |
| 48 x 120 | 126.00 | 3.0150 |
| 48 x 144 | 151.02 | 3.0150 |
| 60 x 120 | 157.05 | 3.0150 |
| 60 x 144 | 189.00 | 3.0150 |
| 72 x 120 | 189.00 | 3.0150 |
| 72 x 144 | 226.08 | 3.0150 |
16 Ga.0 (.0060") | ||
| 30 x 96 | 50.040 | 2.0520 |
| 30 x 120 | 63.000 | 2.0520 |
| 36 x 96 | 60.048 | 2.0520 |
| 36 x 120 | 75.060 | 2.0520 |
| 36 x 144 | 90.072 | 2.0520 |
| 42 x 120 | 88.020 | 2.0520 |
| 48 x 96 | 80.064 | 2.0520 |
| 48 x 120 | 100.08 | 2.0520 |
| 48 x 144 | 121.00 | 2.0520 |
| 60 x 96 | 100.08 | 2.0520 |
| 60 x 120 | 126.00 | 2.0520 |
| 60 x 144 | 151.02 | 2.0520 |
18 Ga.0 (.0048") | ||
| 30 x 96 | 40.032 | 2.0016 |
| 30 x 120 | 50.040 | 2.0016 |
| 36 x 96 | 48.038 | 2.0016 |
| 36 x 120 | 60.048 | 2.0016 |
| 36 x 144 | 72.058 | 2.0016 |
| 42 x 120 | 70.056 | 2.0016 |
| 48 x 96 | 64.051 | 2.0016 |
| 48 x 120 | 80.064 | 2.0016 |
| 48 x 144 | 96.077 | 2.0016 |
| 60 x 120 | 100.08 | 2.0016 |
| 60 x 144 | 121.00 | 2.0016 |
19 Ga.0 (.0042") | ||
| 36 x 120 | 52.092 | 1.0764 |
20 Ga.0 (.0036") | ||
| 30 x 96 | 30.024 | 1.0512 |
| 30 x 120 | 37.080 | 1.0512 |
| 36 x 96 | 36.029 | 1.0512 |
| 36 x 120 | 45.036 | 1.0512 |
| 36 x 144 | 54.043 | 1.0512 |
| 42 x 120 | 52.092 | 1.0512 |
| 48 x 96 | 48.038 | 1.0512 |
| 48 x 120 | 60.048 | 1.0512 |
| 48 x 144 | 72.058 | 1.0512 |
22 Ga.0 (.0030") | ||
| 30 x 96 | 25.020 | 1.0260 |
| 30 x 120 | 61.050 | 1.0260 |
| 36 x 96 | 30.024 | 1.0260 |
| 36 x 120 | 37.080 | 1.0260 |
| 36 x 144 | 45.036 | 1.0260 |
| 48 x 96 | 40.032 | 1.0260 |
| 48 x 120 | 50.040 | 1.0260 |
24 Ga.0 (.0024") | ||
| 30 x 96 | 20.016 | 1.0008 |
| 30 x 120 | 25.020 | 1.0008 |
| 36 x 96 | 24.019 | 1.0008 |
| 36 x 120 | 30.024 | 1.0008 |
| 48 x 96 | 32.026 | 1.0008 |
| 48 x 120 | 40.032 | 1.0008 |
26 Ga.0 (.0018") | ||
| 30 x 96 | 15.012 | .07560 |
| 30 x 120 | 18.090 | .07560 |
| 36 x 96 | 18.014 | .07560 |
| 36 x 120 | 22.068 | .07560 |
| 48 x 96 | 24.01 | .07560 |
| 48 x 120 | 30.024 | .07560 |
28 Ga.0 (.0015") | ||
| 36 x 96 | 15.012 | .0630 |
| 36 x 120 | 18.090 | .0630 |
Stocked Sizes | |
|---|---|
Size (in inches) | Size (in mm) |
.125" | 3.18mm |
.134" | 3.40mm |
.156" | 3.96mm |
.187" | 4.75mm |
.250" | 6.35mm |
.312" | 7.92mm |
.375" | 9.53mm |
.500" | 12.7mm |
.625" | 15.9mm |
.750" | 19.1mm |
.875" | 22.2mm |
1" | 25.4mm |
1.125" | 28.6mm |
1.250" | 31.8mm |
1.500" | 38.1mm |
1.750" | 44.5mm |
2" | 50.8mm |
2.500" | 63.5mm |
3" | 76.2mm |
| SIZE | Inconel Alloy PLATE/ SHEET | SIZE |
|---|---|---|
| .125" | Inconel Sheet | 3.18mm |
| .134" | Inconel Sheet | 3.40mm |
| .156" | Inconel Sheet | 3.96mm |
| .187" | Inconel Sheet | 4.75mm |
| .250" | Inconel Sheet | 6.35mm |
| .312" | Inconel Sheet | 7.92mm |
| .375" | Inconel Sheet | 9.53mm |
| .500" | Inconel Sheet | 12.7mm |
| .625" | Inconel Sheet | 15.9mm |
| .750" | Inconel Sheet | 19.1mm |
| .875" | Inconel Sheet | 22.2mm |
| 1" | Inconel Sheet | 25.4mm |
| 1.125" | Inconel Sheet | 28.6mm |
| 1.250" | Inconel Sheet | 31.8mm |
| 1.500" | Inconel Sheet | 38.1mm |
| 1.750" | Inconel Sheet | 44.5mm |
| 2" | Inconel Sheet | 50.8mm |
| 2.500" | Inconel Sheet | 63.5mm |
| 3" | Inconel Sheet | 76.2mm |
How to recognised sheet, plate or foil:
| France, Europe, Thailand, Qatar | Uns No6601 Inconel601 Steel Plate |
| Indonesia, Philippines, Belgium, Dammam -KSA | Cold Rolled Nickel Alloy Inconel Plate |
| USA, Bangladesh, Finland, Malaysia | Nickel Alloy Inconel 601 Cold-Bonded Stainless Steel Plate |
| Germany, Thailand, Malaysia, Czechia | Pure Inco Nickel Sheet |
| South Africa, Singapore, Singapore, Bahrain | Inconel 718 Stainless Steel Plate (UNS N07718, 2.4668, ALLOY 718) Haynes 718 |
| Saudi Arabia (KSA), Kuwait, Brazil, South Africa | Inconel 6601 High Quality Alloy Thin Plate |
| Malaysia, Hong Kong, UAE, Oman | Inconel 686/ (Alloy 686/2.4606) Cold Rolled Sheets/Plate |
| Australia, UK, Nigeria, Philippines | Gas Turbine Operations 1219mm Width 2438mm Length Inconel 718 Nickel Alloy Plate |
| Turkey, Norway, Malaysia, United Arab Emirates (UAE) | ASTM B168 Inconel Alloy Plate/Sheet Inconel 600 601 625 X-750 718 825 |
| Italy, Iran, Singapore, Chile | Heat-Resisting Inconel 690/Alloy 690 Stainless Steel Plate |
| Malaysia, Russia, Dubai, Netherlands | Inconel Plate 6*1500*6000mm |
| Europe, Malaysia, UAE, United Kingdom -UK | Inconel 690/Alloy 690 Polished Bright Surface Plate |
| South Korea, NY 12203 (USA), Malaysia, Singapore | Inconel X750 Nickel-Base Superalloy Steel Plate |
| Spain, Mexico, UK, Egypt | Inconel 713c Corrosion Resistant Stainless Steel Plate |
| Malaysia, Canada, Singapore, Philippines | 0.1mm Nickel Alloy Plate |
| Thickness (in mm) | |
|---|---|
| 0.0005, Temper: As rolled | 0.02, Temper: Half hard |
| 0.0004, Temper: As rolled | 0.02, Temper: Annealed |
| 0.00076, Temper: As rolled | 0.025, Temper: Half hard |
| 0.00065, Temper: As rolled | 0.025, Temper: Annealed |
| 0.001, Temper: As rolled | 0.030, Coil width: 15.05, Temper: Half hard |
| 0.002, Temper: Half hard | 0.05, Temper: Half hard |
| 0.002, Temper: As rolled | 0.038, Temper: Annealed |
| 0.0025, Temper: As rolled | 1.00, Temper: Annealed |
| 0.0025, Temper: As rolled, Condition: Surface oxide | 0.075, Temper: Half hard |
| 0.0125, Temper: Half hard | 0.015, Coil width: 0.03, Temper: Half hard |
| 0.005, Temper: Quarter hard | 2.00, Temper: Half hard |
| 0.005, Temper: Half hard | 2.00, Temper: 1/4 Hard |
| 0.01, Temper: Half hard | 3.00, Temper: 1/4 Hard |
| 0.0075, Temper: Half hard | 3.00, Temper: Annealed |
| 0.01, Coil width: 10, Temper: Half hard | 6.035, Temper: Hard |
| 0.015, Temper: Half hard | |
Inconel Sheet
ASTM B162 Inconel Plate
Inconel Coil
Inconel Alloy Foil
| Hole Centres (in mm) | Tck mm | Hole Dia (in mm) | Finish | O/A | Full Sheet Size mm |
|---|---|---|---|---|---|
| 1.05 | 0.06 | 0.075 | 2B | 23% | 2000 x 1000 |
| 2 | 1.00 | 1 | 2B | 23% | 2000 x 1000 |
| 2.06 | 1.00 | 1.05 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 5 | 1.00 | 3 | 2B | 33% | 2000 x 1000 |
| 5.06 | 1.00 | 4 | 2B | 46% | 2000 x 1000 |
| 8 | 1.00 | 5 | 2B | 35% | 2000 x 1000 |
| 8 | 1.00 | 6 | 2B | 51% | 2000 x 1000 |
| 10 | 1,0 | 8 | 2B | 58% | 2000 x 1000 |
| Gauge Number | MM | Inches |
| 8 | 4.0365 | .017187 |
| 9 | 3.0968 | .015625 |
| 10 | 3.0571 | .014062 |
| 11 | 3.0175 | .0125 |
| 12 | 2.0778 | .010937 |
| 14 | 1.0984 | .007812 |
| 16 | 1.0587 | .00625 |
| 18 | 1.0270 | .0050 |
| 20 | .09525 | .00375 |
| 22 | .07937 | .003125 |
| 24 | .0635 | .0025 |
| 26 | .0476 | .001875 |
| 28 | .0396 | .001562 |
| 30 | .03175 | .00125 |
| Example | 4.50g/cm³ | x | 6mm | x | 2m | x | 1m | = | 54.00 kg |
|---|---|---|---|---|---|---|---|---|---|
| Metric | density (g/cm³) | x | T | x | W | x | L | = | weight |
| Example | 0.163 lbs/in³ | x | 4in | x | 48in | x | 144in | = | 4506.6 lbs |
|---|---|---|---|---|---|---|---|---|---|
| Imperial | density (lbs/in³) | x | T | x | W | x | L | = | weight |
The calculation tool was programmed with best care and attention. For all that Rime does not guarantee the correctness of the calculation result!
The tool is using this formula: Weight = L/1000 * W/1000 * T * S
| PRODUCT | THICKNESS MM | FINISH | MAX SHEET SIZE MM |
|---|---|---|---|
| Grade | 0.08, 1.02 | Rimex Super Mirror | 2400 x 1200, 2500 x 1250 |
| 0.09 | Bright | 2000 x 1000 | |
| 0.09 | Plain 2B | 2000 x 1000 | |
| 0.09, 1.02 | Brushed Finish | 2000 x 1000, 2500 x 1250 | |
| 0.08, 1.00 | Embossed | 2500 x 1250 |
| Gauge | LB/Sq In. | LB/Sq. Ft. | Gauge Tolerance | ||
|---|---|---|---|---|---|
| 96″ Wide | 72″ Wide | ||||
| 3/8 | 0.03750 | 0.011456 | 16.0496 | +.0060″ -.0010″ | +.0055″ -.0010″ |
| 7/16 | 0.04375 | 0.013250 | 19.0080 | ||
| 1/2 | 0.05000 | 0.015044 | 21.0633 | ||
| 9/16 | 0.05625 | 0.016838 | 24.0247 | ||
| 5/8 | 0.06250 | 0.018633 | 26.0831 | ||
| 11/16 | 0.06875 | 0.020427 | 29.0415 | ||
| 3/16 | 0.01875 | 0.005958 | 8.0579 | +.0050″ -.0010″ | +.0045″ -.0010″ |
| 7/32 | 0.02187 | 0.006854 | 9.0870 | ||
| 1/4 | 0.02500 | 0.007750 | 11.0162 | ||
| 5/16 | 0.03125 | 0.009546 | 13.0746 | ||
| 1 | 1.00000 | 0.029628 | 42.0665 | +.0075 -.0010″ | +.0070″ -.0010″ |
| 1-1/8 | 1.01250 | 0.033217 | 47.0833 | ||
| 1-1/4 | 1.02500 | 0.036806 | 53.0001 | ||
| 1-3/8 | 1.03750 | 0.040395 | 58.0169 | ||
| 1-1/2 | 1.05000 | 0.043984 | 63.0337 | ||
| 1-3/4 | 1.07500 | 0.051161 | 73.0672 | ||
| 3/4 | 0.07500 | 0.022308 | 32.0123 | +.0065″ -.0010″ | +.0060″ -.0010″ |
| 13/16 | 0.08125 | 0.024102 | 34.0707 | ||
| 7/8 | 0.08750 | 0.025897 | 37.0291 | ||
| 15/16 | 0.09375 | 0.027691 | 39.0875 | ||
| 3 | 3.00000 | 0.087709 | 126.0301 | +.0160″ -.0010″ | |
| 3-1/2 | 3.05000 | 1.002064 | 146.0972 | ||
| 2 | 2.00000 | 0.058339 | 84.0008 | +.0150″ -.0010″ | +.0125″ -.0010″ |
| 2-1/8 | 2.01250 | 0.062229 | 89.0610 | ||
| 2-1/4 | 2.02500 | 0.065817 | 94.0777 | ||
| 2-1/2 | 2.05000 | 0.072995 | 105.0113 | ||
| 2-3/4 | 2.07500 | 0.080173 | 115.0449 | ||
| 4 | 4.00000 | 1.016850 | 168.0264 | +.0200″ -.0010 | |
| Specified Thickness (t), in. (mm) | Flatness Tolerance for Thicknesses Given, in. (mm) |
|---|---|
| 1/4 <= t < 3/8 (9.052) | 3/8 (9.05) |
| t < 1/4 (6.035) | 7/16 (11) |
| t >=4 (101.060) | 1/4 (6.04) |
| 1/2 (12.070) <= t < 3/4 (19.005) | 5/16 (7.09) |
| 3/8 (9.052) <= t < 1/2 (12.070) | 5/16 (7.09) |
| 1 (25.040) <= t < 1-1/2 (38.010) | 1/4 (6.04) |
| 3/4 (19.005) <= t < 1 (25.040) | 5/16 (7.09) |
| 1 1/2 (38.010) < = t < 4 (101.060) | 1/4 (6.04) |
| Specified Thickness in. | Permitted Variations, in. Over and Under, Except as Indicated Otherwise for Specified Width (w) in. | |
|---|---|---|
| Width >60 | Width <=60 | |
| >0.01875 to 0.0250 | -0.0010; +0.0020 | -0.0010; +0.0020 |
| >0.0250 to 0.03125 | -0.0010; +0.0022 | -0.0010; +0.0022 |
| >0.03125 | -0.0010; +0.0030 | -0.0010; +0.0030 |
| 1.00 | 1.02 |
| 0.06 | 0.08 |
| 1.08 | 2.00 |
| 1.05 | 1.06 |
| 5.00 | 6.00 |
| 3.00 | 4.00 |
| 12.00 | 15.00 |
| 8.00 | 10.00 |
| 20.00 | 25.04 |
| Inconel | Element (% By Mass) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
| 600 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
| 617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
| 625 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
| 690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
| 718 | 50.0–55.0 | 17.0–21.0 | Balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
| X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 | |||
| Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | |||
| Psi – 1,35,000 , MPa -930 | Psi – 75,000 , MPa – 517 | 42.5 | – | – |
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 600 | N06600 | NA 13 | NiCr15Fe | 2.4816 | NC15FE11M | МНЖМц 28-2,5-1,5 | NCF 600 |
| Inconel 625 | N06625 | NA 21 | NiCr22Mo9Nb | 2.4856 | NC22DNB4M | ХН75МБТЮ | NCF 625 |
| Inconel 601 | N06601 | NA 49 | NiCr23Fe | 2.4851 | NC23FeA | XH60BT | NCF 601 |
| Incoloy 825 | N08825 | NA 16 | NiCr21Mo | 2.4858 | NFE30C20DUM | ЭП703 | NCF 825 |