Table of Content
Specification | ASTM B446/ ASME SB446 |
---|---|
Round bar size | Diameter: 3-~800mm |
Hex Bar size | 2-100mm A/F |
Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Square bar size | 4 to 100mm |
Angle bar size (in mm) | 3*20*20~12*100*100 |
Section | 3.0 to 12.0mm thickness |
Channel Bar (in mm) | 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
Hollow Bar (in mm) | 32 OD x 16 ID to 250 OD x 200 ID) |
Billet Size | 1/2" to 495mm Diameter |
Rectangles Size | 33 x 30mm to 295 x 1066mm |
Manufacturing Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Processing | Bar cutting to 650mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
ASME SB446 Inconel Round Bar
Incoloy Flat Bar
ASTM B446 Inconel Square Bar
Inconel Alloy Cold Drawn Bar
ASME SB167 inconel Annealed Bar
Inconel Polished Bar
Cold Drawn Inconel Bright Bar
ASTM B446 Inconel Forged Bar
Inconel Round Bar Price List | Quantity | Price in India |
---|---|---|
Inconel 600 Bar Price 200.0mm dia x 10mm long | 1 | $344.23 |
Price of Alloy 625 Bar 200.0mm dia x 10mm long | 2 | $623.82 |
Price of Alloy 825 Rod 200.0mm dia x 10mm long | 3 | $873.91 |
Inconel | Element (% By Mass) | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ni | Cr | Fe | Mo | Nb | Co | Mn | Cu | Al | Ti | Si | C | S | P | B | |
600 | 72.0 | 14.0–17.0 | 6.0–10.0 | 1.0 | 0.5 | 0.5 | 0.15 | 0.015 | |||||||
617 | 44.2–56.0 | 20.0–24.0 | 3.0 | 8.0–10.0 | 10.0–15.0 | 0.5 | 0.5 | 0.8–1.5 | 0.6 | 0.5 | 0.15 | 0.015 | 0.015 | 0.006 | |
625 | 58.0 | 20.0–23.0 | 5.0 | 8.0–10.0 | 3.15–4.15 | 1.0 | 0.5 | 0.4 | 0.4 | 0.5 | 0.1 | 0.015 | 0.015 | ||
690 | 59.5 | 30 | 9.2 | 0.35 | 0.01 | 0.02 | 0.35 | 0.019 | 0.003 | ||||||
718 | 50.0–55.0 | 17.0–21.0 | Balance | 2.8–3.3 | 4.75–5.5 | 1.0 | 0.35 | 0.2–0.8 | 0.65–1.15 | 0.3 | 0.35 | 0.08 | 0.015 | 0.015 | 0.006 |
X-750 | 70.0 | 14.0–17.0 | 5.0–9.0 | 0.7–1.2 | 1.0 | 1.0 | 0.5 | 0.4–1.0 | 2.25–2.75 | 0.5 | 0.08 | 0.01 |
Dammam -KSA, Indonesia, Belgium, Philippines | Solid Solution Nickel Alloy Inconel Round Bar |
Qatar, France, Thailand, Europe | Prime Quality Nickle Alloy Inconel X750 Round Bar |
Czechia, Germany, Malaysia, Thailand | Inconel 713LC Casting Round Bars (inconel 713C, IN713C, Inconel 713, Alloy 713LC, UNS R30783) |
Malaysia, USA, Finland, Bangladesh | Inconel Stainless Steel Round Bar (600 / 601 /625/ 718 /750) |
South Africa, Saudi Arabia (KSA), Brazil, Kuwait | ASME Sb-166 Inconel 690 Round Bar |
Bahrain, South Africa, Singapore | Polished Finish Alloy 601 Inconel 601 Nickel Alloy Round Rod/Bar |
Philippines, Australia, Nigeria, UK | AMS 5663 Nickel Alloy Inconel 718 Forging Steel Round Bar |
Oman, Malaysia, UAE, Hong Kong | Inconel Nickel Alloy Round Bar with Black Surface |
Chile, Italy, Singapore, Iran | ASME 5663 Nickel Based Super Alloy Inconel 718 Round Bar |
United Arab Emirates (UAE), Turkey, Malaysia, Norway | Nickel Based Alloy ASME Sb-166 Inconel 601 Nickel-Chromium Steel Round Flat Bar |
Netherlands, Malaysia, Dubai, Russia | Alloy Inconel 713c Steel Round Bar |
Egypt, Spain, UK, Mexico | Machining Inconel Alloy 718 (UNS N07718) Centerless Ground Round Bar |
United Kingdom -UK, Europe, UAE, Malaysia | Inconel 601 Forged/Forging Round Bars (UNS N06601, 2.4851, Alloy 601) |
UK, Canada, Ellington -United States, Poland | Inconel X-750 Forged/Forging Round Bars (UNS N07750, 2.4669, Alloy X-750) |
Philippines, Malaysia, Singapore, Canada | Inconel 690 Forged/Forging Round Bars (UNS N06690, 2.4642, Alloy 690) |
Europe, Japan, Malaysia, Romania | Inconel 686 Round Bar |
Sweden, Colombia, China, Malaysia | Inconel 617 Forged/Forging Round Bars (UNS N06617, 2.4663, Alloy 617) |
Malaysia, Taiwan, Philippines, Los Alamos -Mexico | Inconel 713c Bright Round Bar |
Singapore, South Korea, Malaysia, NY 12203 (USA) | Inconel X-750 N07750 Round Nickel Bar |
Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | |||
Psi – 1,35,000 , MPa -930 | Psi – 75,000 , MPa – 517 | 42.5 | – | – |
Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
BS | En | No | AFNOR | ||||
Inconel 600 | N06600 | NA 13 | NiCr15Fe | 2.4816 | NC15FE11M | МНЖМц 28-2,5-1,5 | NCF 600 |
Inconel 625 | N06625 | NA 21 | NiCr22Mo9Nb | 2.4856 | NC22DNB4M | ХН75МБТЮ | NCF 625 |
Inconel 601 | N06601 | NA 49 | NiCr23Fe | 2.4851 | NC23FeA | XH60BT | NCF 601 |
Incoloy 825 | N08825 | NA 16 | NiCr21Mo | 2.4858 | NFE30C20DUM | ЭП703 | NCF 825 |
H&T | Hardened and tempered. |
ANN | Annealed |
PH | Precipitation hardened. |
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
SIZES (mm) | SIZES (Inches) | ISO Tolerance |
---|---|---|
3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
Specifications: |
ASTM B166, AMS 5665 |
International Specifications: |
BS 3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4816 TÜV 305 AFNOR-NC 15 Fe |
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
---|---|---|---|---|---|---|---|
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.625 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Shape / Section | Size, diameter or width across flats | Permitted variation |
mm | mm | |
Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
hex bar Size in Inches |
hex bar Wt per Ft |
hex bar Wt per 12′ |
---|---|---|
3/16″ |
0.104 |
1.248 |
1/4″ |
0.180 |
2.160 |
5/16″ |
0.290 |
3.480 |
3/8″ |
0.625 |
4.920 |
7/16″ |
0.560 |
6.72 |
1/2″ |
0.740 |
8.880 |
9/16″ |
0.930 |
11.16 |
5/8″ |
1.150 |
13.80 |
11/16″ |
1.390 |
16.68 |
3/4″ |
1.660 |
19.92 |
13/16″ |
1.950 |
23.40 |
7/8″ |
2.300 |
27.60 |
15/16″ |
2.625 |
31.20 |
1″ |
2.90 |
34.80 |
1-1/16″ |
3.30 |
39.60 |
1-1/8″ |
3.700 |
44.40 |
1-1/4″ |
4.625 |
55.20 |
1-5/16″ |
5.100 |
61.20 |
1-3/8″ |
5.625 |
67.20 |
1-7/16″ |
6.100 |
73.20 |
1-1/2″ |
6.625 |
79.20 |
1-5/8″ |
7.800 |
93.60 |
1-3/4″ |
9.030 |
108.36 |
1-7/8″ |
10.400 |
124.80 |
2″ |
11.80 |
141.60 |
2-1/4″ |
14.920 |
179.04 |
2-3/8″ |
16.920 |
203.04 |
2-1/2″ |
18.42 |
221.04 |
3″ |
26.53 |
318.36 |
Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
---|---|---|---|---|---|---|---|---|
3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
2-1/2" | 7.576 | 24.856 | ||||||
2-5/8" | 8.354 | 27.409 | ||||||
2-3/4" | 9.169 | 30.083 |
|
|
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
---|---|---|---|
Cold Drawn and Polish | 3.00 – 75.00 | 1/8” – 3.00” | h8-h9-h10-h11, ASTM B637 |
Cold Drawn and Ground | 10.00 – 75.00 | 5/6” – 2.50” | h8-h9-h10-h11 |
Peeled and Polished | 40.00 – 150.00 | 1.50” – 6.00” | h11, ASTMA-484 h11-DIN 1013 |
Peeled and Ground | 20.00 – 50.00 | 3/4″ – 2.00” | h9-h10-h11, ASTM B160 |
Inconel Flat bar – metric sizes and weights |
|||
---|---|---|---|
Flat Size |
KG’s per Metre |
Standard Length (metres) |
Colour Code |
10 x 3 |
0.24 |
6.0 |
Blue |
13 x 3 |
0.31 |
6.0 |
Blue |
13 x 5 |
0.46 |
6.0 |
Orange |
16 x 3 |
0.38 |
6.0 |
Blue |
16 x 5 |
0.64 |
6.0 |
Orange |
16 x 8 |
1.03 |
6.0 |
Red |
20 x 3 |
0.48 |
6.0 |
Blue |
20 x 5 |
0.81 |
6.0 |
Orange |
20 x 6 |
0.97 |
6.0 |
White |
20 x 10 |
1.61 |
6.0 |
Yellow |
25 x 3 |
0.60 |
6.0 |
Blue |
25 x 5 |
1.01 |
6.0 |
Orange |
25 x 6 |
1.21 |
6.0 |
White |
25 x 8 |
1.61 |
6.0 |
Red |
25 x 10 |
2.01 |
6.0 |
Yellow |
25 x 12 |
2.41 |
6.0 |
Pink |
32 x 3 |
0.77 |
6.0 |
Blue |
32 x 5 |
1.29 |
6.0 |
Orange |
32 x 6 |
1.55 |
6.0 |
White |
32 x 8 |
2.06 |
6.0 |
Red |
32 x 10 |
2.58 |
6.0 |
Yellow |
32 x 12 |
3.09 |
6.0 |
Pink |
40 x 3 |
0.97 |
6.0 |
Blue |
40 x 5 |
1.61 |
6.0 |
Orange |
40 x 6 |
1.93 |
6.0 |
White |
40 x 8 |
2.58 |
6.0 |
Red |
40 x 10 |
3.22 |
6.0 |
Yellow |
40 x 12 |
3.86 |
6.0 |
Pink |
40 x 16 |
5.15 |
6.0 |
Grey |
40 x 20 |
6.14 |
6.0 |
Green |
50 x 3 |
1.21 |
6.0 |
Blue |
50 x 5 |
2.01 |
6.0 |
Orange |
50 x 6 |
2.41 |
6.0 |
White |
50 x 8 |
3.22 |
6.0 |
Red |
50 x 10 |
4.02 |
6.0 |
Yellow |
50 x 12 |
4.83 |
6.0 |
Pink |
50 x 16 |
6.44 |
6.0 |
Grey |
50 x 20 |
8.05 |
6.0 |
Green |
50 x 25 |
10.1 |
6.0 |
Purple |
65 x 3 |
1.57 |
6.0 |
Blue |
65 x 5 |
2.62 |
6.0 |
Orange |
65 x 6 |
3.14 |
6.0 |
White |
65 x 8 |
4.18 |
6.0 |
Red |
65 x 10 |
5.23 |
6.0 |
Yellow |
65 x 12 |
6.28 |
6.0 |
Pink |
65 x 16 |
8.37 |
6.0 |
Grey |
65 x 20 |
10.5 |
6.0 |
Green |
65 x 25 |
13.1 |
6.0 |
Purple |
75 x 5 |
3.02 |
6.0 |
Orange |
75 x 6 |
3.62 |
6.0 |
White |
75 x 8 |
4.83 |
6.0 |
Red |
75 x 10 |
6.04 |
6.0 |
Yellow |
75 x 12 |
7.24 |
6.0 |
Pink |
75 x 16 |
9.66 |
6.0 |
Grey |
75 x 20 |
12.1 |
6.0 |
Green |
75 x 25 |
15.1 |
6.0 |
Purple |
75 x 40 |
24.1 |
6.0 |
Yellow |
90 x 5 |
3.62 |
6.0 |
Orange |
90 x 6 |
4.35 |
6.0 |
White |
90 x 8 |
5.79 |
6.0 |
Red |
90 x 10 |
7.24 |
6.0 |
Yellow |
90 x 12 |
8.69 |
6.0 |
Pink |
100 x 5 |
4.02 |
6.0 |
Orange |
100 x 6 |
4.83 |
6.0 |
White |
100 x 8 |
6.44 |
6.0 |
Red |
100 x 10 |
8.05 |
6.0 |
Yellow |
100 x 12 |
9.66 |
6.0 |
Pink |
100 x 16 |
12.9 |
6.0 |
Grey |
100 x 20 |
16.1 |
6.0 |
Green |
100 x 25 |
20.1 |
6.0 |
Purple |
100 x 50 |
40.2 |
6.0 |
Green |
110 x 6 |
5.31 |
6.0 |
White |
110 x 8 |
7.08 |
6.0 |
Red |
110 x 10 |
8.85 |
6.0 |
Yellow |
110 x 12 |
10.6 |
6.0 |
Pink |
130 x 5 |
5.23 |
6.0 |
Orange |
130 x 6 |
6.28 |
6.0 |
White |
130 x 8 |
8.37 |
6.0 |
Red |
130 x 10 |
10.5 |
6.0 |
Yellow |
130 x 12 |
12.6 |
6.0 |
Pink |
130 x 16 |
16.7 |
6.0 |
Grey |
130 x 20 |
20.9 |
6.0 |
Green |
130 x 25 |
26.2 |
6.0 |
Purple |
150 x 5 |
6.04 |
6.0 |
Orange |
150 x 6 |
7.24 |
6.0 |
White |
150 x 8 |
9.66 |
6.0 |
Red |
150 x 10 |
12.1 |
6.0 |
Yellow |
150 x 12 |
14.5 |
6.0 |
Pink |
150 x 16 |
19.3 |
6.0 |
Grey |
150 x 20 |
24.1 |
6.0 |
Green |
150 x 25 |
30.1 |
6.0 |
Purple |
150 x 50 |
60.4 |
6.0 |
Green |
180 x 5 |
7.24 |
6.0 |
Orange |
180 x 6 |
8.69 |
6.0 |
White |
180 x 10 |
14.5 |
6.0 |
Yellow |
180 x 12 |
17.4 |
6.0 |
Pink |
180 x 16 |
23.2 |
6.0 |
Grey |
180 x 20 |
29.0 |
6.0 |
Green |
180 x 25 |
36.2 |
6.0 |
Purple |
200 x 6 |
9.66 |
6.0 |
White |
200 x 8 |
12.9 |
6.0 |
Red |
200 x 10 |
16.1 |
6.0 |
Yellow |
200 x 12 |
19.3 |
6.0 |
Pink |
200 x 16 |
25.7 |
6.0 |
Grey |
200 x 20 |
32.2 |
6.0 |
Green |
200 x 25 |
40.3 |
6.0 |
Purple |
250 x 6 |
12.1 |
6.0 |
White |
250 x 8 |
16.1 |
6.0 |
Red |
250 x 10 |
20.1 |
6.0 |
Yellow |
250 x 12 |
24.1 |
6.0 |
Pink |
250 x 16 |
32.2 |
6.0 |
Grey |
250 x 20 |
40.2 |
6.0 |
Green |
250 x 25 |
50.3 |
6.0 |
Purple |
300 x 6 |
14.5 |
6.0 |
White |
300 x 8 |
19.3 |
6.0 |
Red |
300 x 10 |
24.1 |
6.0 |
Yellow |
300 x 12 |
29.0 |
6.0 |
Pink |
300 x 16 |
38.6 |
6.0 |
Grey |
300 x 20 |
48.3 |
6.0 |
Green |
300 x 25 |
60.4 |
6.0 |
Purple |
0.2% Proof Stress |
Tensile Strength |
Elongation |
Reduction of area |
Hardness |
---|---|---|---|---|
MPA |
MPA |
% |
% |
HRC |
Min |
Min |
Min |
Min |
Min |
827 |
1034 |
17 |
25 |
40 |
|
|