We, Siddhagiri Metals and Tubes, are leading Inconel 600 Plate suppliers, 2.4816 Inconel 600 Foil, Nickel Alloy 600 Strip and the thickness and the size of the ASTM B168 UNS N06600 Cold Rolled Plate that we have in stock, is almost impossible to find anywhere else. For us, there is no enquiry for 2.4816 Alloy 600 Sheet that is too small or too big. And if we do not have what you need in stock or in the event that you have special requirements for AMS 5540 Inconel 600 Alloy Polished Plate, we will supply these to you, direct from our mill. If you happen to be seeking Inconel 600 plate for sale, at the best possible market price, be sure to call us. Whatever is your need for Inconel 600 shim stock and all kinds of Inconel Alloy 600 strip, Flat Shim you can be sure that we have all that you seek.
Table of Content
Inconel 600 sheet contains the combination of nickel and chromium. Nickel leads to the ductile element in the sheet and makes Alloy 600 Nickel Flat Plate flexible for various uses in chemical and other suited industries. The Alloy 600 Inconel Clad Plate is good for temperatures up to 700 degree Celsius. Furthermore, the Inconel 600 Plate is made with such components that it is non magnetic and extremely responsive to varying conditions in industries. The Inconel 600 Din 2.4816 2D Plate thickness tolerance is its USP, as a result of which most Nuclear reactors; aerospace, marine, petrochemical and pharmaceutical industries prefer the 2.4816 Inconel 600 Plate material compared to any other.
Inconel 600 Plate are manufactured from an alloy of nickel chromium and they are specially designed for use in applications that involve the use of high temperatures. Alloy 600 plate exhibit excellent mechanical strength and they are also used in processes where there are cryogenic temperatures, up to a temperature range of 1200 °C. Inconel 600 clad plate has been approved under ASME and AS1210 pressure vessel and boiler code Section I, Section III and Section VIII, for use in temperatures up to 650 °C. By using the conventional shop welding techniques, it is possible to very easily weld Inconel 600 Hot Rolled Plate. In industries where there is a need for furnace atmospheres and resistance to oxidation, there is a huge demand for the use of Inconel 600 Cold Rolled Plate.
The Inconel Alloy 600 Plate consists of 70 percent Nickel with an addition of cobalt. The chromium level is followed by 14-17 percent and the aluminium percent ranges from 0.4 to 1 percent in total. Other elements that reflect in the composition are Iron, Silicon, Sulfur, Copper and Carbon in less than or almost 1 percent. The UNS N06600 Inconel 600 Strip varies in its composition but they have pretty much the same nature when we look into the Inconel sheets and their functionality. We are best manufacturer, exporter and Inconel 600 Sheet suppliers in the world and our experience has made us a leader in metal industry.
Specification | ASTM B168 / ASME SB168 |
---|---|
standards and approvals |
|
Standard Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
Thickness | 0.1 to 100 mm Thk |
Width | 10-2500mm |
Length | 2m, 2.44m, 3m, or as required |
Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
Stock available in form of | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
Manufacturers | Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
Plasma profiles | As per customer's drawings |
Value added services | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Inconel 600 UNS N06600 Plate density |
---|
Density, lb/in3: 0.306 Mg/m3: 8.47 |
Inconel 600 Plate melting range |
---|
°F: 2470-2575 °C: 1354-1413 |
Price list of Inconel 600 Plate in India | Inconel 600 UNS N06600 Plate Price in India (INR) | 600 Inconel Plate Price in UK Pound sterling | Alloy Inconel 600 Plate Price in UAE Dirham |
---|---|---|---|
INCONEL ALLOY 600 (UNS N06600) HR PLATE ANNEALED,DESCALED.ASTM B168/ASME SB168 65MM THK X 900MM X 1 | INR 1,658/kg | 17.92 UK Pound sterling | 85.62 UAE Dirham |
DEFECTIVE INCONEL PLATE GRADE 600 | INR 494/Kg | 5.34 UK Pound sterling | 25.51 UAE Dirham |
HOT ROLLED SB 168 UNS NO6600 INCONEL 600 PLATE 70MM THK, 2400MM X 2400MM | INR 1,514/Kg | 16.37 UK Pound sterling | 78.19 UAE Dirham |
Netherlands, Malaysia, Philippines | nickel Sheet Inconel 600 Plate |
Chile, China, South Africa, United Kingdom -UK | High Temperature Alloy Material Inconel 600 Plate |
Egypt, Sweden, Oman, Europe | Uns No6600 Inconel600 Steel Plate |
Australia, Malaysia, Germany, Spain | Nickel Based Alloy Inconel 600 Nickel-Chromium Steel Strip Sheet Plate |
United Arab Emirates (UAE), Philippines, Bahrain, UK | Inconel 600 Nickel Alloy Plate with Annealing Treatment |
Italy, Japan, Saudi Arabia (KSA), Canada | ASTM B168 UNS N06600 sheet |
Malaysia, Singapore, USA, Europe | Inconel 600 Plate 6*1500*6000mm Uns N06600 |
Malaysia, Taiwan, Thailand, Mexico | Inconel 600/N06600 Cold Rolled Stainless Steel Plate |
Turkey, Colombia, South Africa, Malaysia | Cold Rolled Strip Alloy 600/N06600/Inconel 600 Nickel Alloy Plate & Plate |
Singapore, Romania, Kuwait, Poland | 0.1mm Nickel Alloy inconel 600 Plate |
UK, South Korea, Bangladesh, Malaysia | N06600 Corrosion Resistant Nickel Base Alloy Plate |
Iran, Malaysia, Singapore, Canada | Cold Rolled Strip Inconel 600 Plate |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 600 Plate | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 600 Plate | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Element | Density | Melting Point | Specific Heat | Magnetic Permeability (75°F, 200 oersted): |
Inconel 600 Plate | 0.306 (m g/m3) | 2470-2575°F | 0.106 Btu/lb x °F (444 J/kg-°C) | 1.010 |
Density |
---|
Density, lb/in3: 0.306, Mg/m3: 8.47 |
Melting range |
---|
°F: 2470-2575 , °C: 1354-1413 |
Alloy 600 UNS N06600 Plate 2b Finish | ASTM B168 Inconel 600 Alloy Diamond Plate |
ASTM B168 Inconel 600 Alloy Clad Plate | Alloy Inconel 600 B168 Tisco Plate |
Inconel 6600 Chequer Plate | Inconel Alloy 600 Tread Plate |
Alloy Inconel 600 B168 Checker Plate | 2.4816 Inconel Polished Plate |
2.4816 Inconel Plate Brushed Finish | SB 168 Alloy 600 Nickel Hot Rolled Sheet |
Alloy 600 Inconel 10mm Plate | 2.4816 Inconel 600 Cold Rolled Sheet |
2.4816 Alloy 600 B168 Embossed Plate | 600 Inconel Plasma Cutting Plate |
Inconel Alloy 600 Plate Mirror Finish | Alloy 600 Inconel Chequered Plate |
SB 168 Alloy 600 Nickel 1/4 Inch Plate | Inconel 600 Din 2.4816 Perforated Sheet |
Inconel UNS No 6600 Plate Mill Finish | Inconel 6600 Thin Plate |
Inconel 600 Chequered Plate | Alloy Inconel 600 Quarto Plate |
Inconel 600 Din 2.4816 Checkered Plate | Inconel 600 Laser Cut Plate |
Stocked Sizes |
|
---|---|
Size (in inches) |
Size (in mm) |
.125" |
3.18mm |
.134" |
3.40mm |
.156" |
3.96mm |
.187" |
4.75mm |
.250" |
6.35mm |
.312" |
7.92mm |
.375" |
9.53mm |
.500" |
12.7mm |
.600" |
15.9mm |
.750" |
19.1mm |
.875" |
22.2mm |
1" |
25.4mm |
1.125" |
28.6mm |
1.250" |
31.8mm |
1.500" |
38.1mm |
1.750" |
44.5mm |
2" |
50.8mm |
2.500" |
63.5mm |
3" |
76.2mm |
Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.
Metric Dimensions | ||
---|---|---|
Surface finish | Thickness (mm) | Width (mm) |
2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
2H – Work hardened | 0.4–6.35 | max. 1524 |
Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions | ||
---|---|---|
Surface finish | Gauge (in) | Width (in) |
2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
BA Mexinox only | 18–28 | max. 48 |
Polished (not brushed) | 11–24 | max. 60 |
Temper rolled Mexinox only | 13–29 | max. 48 |
Alloy | Product form | Dimension |
---|---|---|
INCONEL 600 (75 Ni/16 Cr) | Strip; cold rolled, annealed | 0.10x150 mm x coil, 0.12 kg/m |
ALLOY 600 (75 Ni/16 Cr) | Strip; cold rolled, annealed | 0.40x200 mm x coil, 0.7 kg/m |
INCONEL 600 (75 Ni/16 Cr) | Sheet; cold rolled, annealed | 0.4x914.4 mm x coil, 3.03 kg/m |
INCONEL 600 (75 Ni/16 Cr) | Sheet; cold rolled, annealed | 0.5x1000 mm x coil, 4.14 kg/m |
INCONEL 600 (75 Ni/16 Cr) | Sheet; cold rolled, annealed | 0.7x1000x2000 mm, 13.25 kg/pc |
INCONEL 600 (75 Ni/16 Cr) | Sheet; cold rolled, annealed | 0.8x1219 mm x coil, 8.1 kg/m |
ALLOY 600 (75 Ni/16 Cr) | Sheet; cold rolled, annealed | 1.0x1220 mm x coil, 10.10 kg/m |
INCONEL 600 (75 Ni/16 Cr) | Sheet; cold rolled, annealed | 1.2x1200x3000 mm, 37.8 kg/pc |
INCONEL 600 (75 Ni/16 Cr) | Sheet; cold rolled, pickled, annealed | 1.6x1220x3600 mm, 59 kg/pc |
ALLOY 600 (75 Ni/16 Cr) | Sheet; cold rolled, annealed | 2.0x1200x3000 mm, 62 kg/pc |
INCONEL 600 (75 Ni/16 Cr) | Sheet; cold rolled, annealed, pickled | 2.5x1200x3000 mm, 76 kg/pc |
ALLOY 600 (75 Ni/16 Cr) | Sheet; cold rolled, soft annealed, descaled, sheared, tread plate, Checker Plate | 3.0x1220x3000 mm, 92 kg/pc |
ALLOY 600 (75 Ni/16 Cr) | Plate; hot rolled, annealed | 4.0x1200x3000 mm, 122 kg/pc |
ALLOY 600 (75 Ni/16 Cr) | Plate; hot rolled, annealed | 5.0x2400x6000 mm, 606 kg/pc |
ALLOY 600 (75 Ni/16 Cr) | Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate | 6.0x2440x6000 mm, 746 kg/pc |
INCONEL 600 (75 Ni/16 Cr) | Plate; hot rolled, descaled, annealed | 8.0x2000x4000 mm, 564 kg/pce |
ALLOY 600 (75 Ni/16 Cr) | Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate | 10.0x2000x4000 mm, 726 kg/pc |
ALLOY 600 (75 Ni/16 Cr) | Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate | 12.0x2000x3000 mm, 616 kg/pc |
INCONEL 600 (75 Ni/16 Cr) | Plate; hot rolled, annealed | 20.0x915x1235 mm, 193 kg/pc |
0.5 mm 0.6 mm 0.8 mm 1.0 mm 1.2 mm 1.5 mm 1.6 mm 1.8 mm 2.0 mm 3.0 mm |
4.0 mm |
Thickness | Alloy | Plate Weight per Unit Area | Density |
---|---|---|---|
3/16 inches | Inconel 600 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/4 inches | Inconel 600 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/8 inches | Inconel 600 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/2 inches | Inconel 600 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
5/8 inches | Inconel 600 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/4 inches | Inconel 600 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
7/8 inches | Inconel 600 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 inches | Inconel 600 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches | Inconel 600 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches | Inconel 600 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches | Inconel 600 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 inches | Inconel 600 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches | Inconel 600 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches | Inconel 600 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches | Inconel 600 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3 inches | Inconel 600 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |