Table of Content
Specification | ASTM B424 / ASME SB424 |
---|---|
standards and approvals |
|
Standard Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
Thickness | 0.1 to 100 mm Thk |
Width | 10-2500mm |
Length | 2m, 2.44m, 3m, or as required |
Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
Stock available in form of | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
Manufacturers | Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
Plasma profiles | As per customer's drawings |
Value added services | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Incoloy 825 Sheet
Alloy Incoloy 825 Plate
Incoloy Alloy 825 Coil
ASTM B424 825 Incoloy Foil
Incoloy 825 Strip
Alloy Incoloy 825 Shim Sheet
Incoloy Alloy 825 Strip Tape
ASTM B424 825 Incoloy Chequered Plate
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Incoloy 825 Chequered Plate | Incoloy Alloy 825 Quarto Plate | ASTM B424 825 Incoloy Cold Rolled Plate | 2.4858 Incoloy 825 Bbq Plate |
Incoloy 825 Din 2.4858 Plate 2b Finish | Incoloy 8825 Diamond Plate |
Alloy Incoloy 825 Plate | ASTM B424 825 Incoloy Rolling Plate |
Incoloy Alloy 825 Hot Rolled Plate | Incoloy 825 Din 2.4858 Perforated Plate |
2.4858 Incoloy 825 Plate Mill Finish | SB424 Alloy 825 Thin Plate |
2.4858 Alloy 825 Plate Mirror Finish | Alloy 825 Inconel Chequered Plate |
Incoloy 825 Alloy Checker Plate | Nickel Alloy 825 Polished Plate |
Alloy 825 UNS N08825 Custom Cut Plate | Alloy 825 Nickel Sheet |
Inconel 825 1/4 Inch Plate | Incoloy 825 Nickel Alloy Perforated Sheet |
Incoloy 8825 Clad Plate | Incoloy 825 Alloy Tisco Plate |
SB424 Alloy 825 Chequer Plate | 2.4858 Alloy 825 Tread Plate |
Metric Dimensions | ||
---|---|---|
Surface finish | Thickness (mm) | Width (mm) |
2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
2H – Work hardened | 0.4–6.35 | max. 1524 |
Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions | ||
---|---|---|
Surface finish | Gauge (in) | Width (in) |
2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
BA Mexinox only | 18–28 | max. 48 |
Polished (not brushed) | 11–24 | max. 60 |
Temper rolled Mexinox only | 13–29 | max. 48 |