- +91-22-23865529
- enquiry@siddhagirimetals.com
Incoloy 800 Plate
buy Astm B409 Uns N08800 Sheet online at best price in India
Incoloy 800 Plate is a form of nickel-iron-chromium alloys that holds a good strength and are resistant to oxidation in high-temperature exposures. This Alloy 800 Sheet can stay static, and the austenitic structure remains maintained even after exposure to high temperature. Also, the Nickel Alloy 800 Shim Sheet is recognized because of its excellent cold-foaming properties.
These properties are specifically connected with the nickel-chromium based alloy. These alloys are exhibited with the Uns N08800 Inconel 800 Chequered Plate. These sheets have restricted chemistry, and they require heat treatment of around 2100 Degree F (1149 Degree C) minimum.
We are known as the best Inconel 800 Plate Suppliers in India, and we believe in offering superior technology and extensive quality control of Din 1.4876 Strips. Whether it is finishing the surface or the steelmaking, we maintain stability in the production process.
Also, you will get the Nickel Alloy 800 Shim Sheet in varied forms. These forms can be Foil, Rolls, Shim Sheet, Coils, Strip, Rolling sheet, etc. Using our Incoloy 800 Alloy Foil, you can easily estimate the different weight of Astm B409 Alloy 800 Hot Rolled Plate. These plates are suitable for water heater, and it saves your time & cost to procure any size range in Incoloy 800 Perforated Sheet from any other vendor or Manufacturer of Astm B409 Uns N08800 Coil in India.
Incoloy 800 Plate
Alloy 800 Sheet
1.4876 Alloy 800 Coil
Manufacturer & supplier of 2B/ BA/ HL/ NO.1 finish Din 1.4876 Strips and Coil
Table of Content
- Specification Format of Incoloy 800 Plate / Sheet
- Most Selling types of Alloy 800 Sheet
- View Prices of 1.4876 Alloy 800 Plate
- Chemical Properties of Nickel Alloy 800 Plate
- Mechanical Characteristics of Incoloy 800 Alloy Coil
- Equivalent material of Incoloy 800 Strip
- Stock List of SB 409 Alloy 800 Plate
- Incoloy 800 Alloy Plate Dimensions
| Specification | ASTM B409 / ASME SB409 |
|---|---|
| standards and approvals |
|
| Standard Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
| Thickness | 0.1 to 100 mm Thk |
| Width | 10-2500mm |
| Length | 2m, 2.44m, 3m, or as required |
| Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
| Stock available in form of | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
| Manufacturers | Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
| Plasma profiles | As per customer's drawings |
| Value added services | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Incoloy 800 Sheet
Nickel Alloy 800 Plate
Incoloy 800 Alloy Coil
SB 409 Alloy 800 Foil
Incoloy 800 Strip
Nickel Alloy 800 Shim Sheet
Incoloy 800 Alloy Strip Tape
SB 409 Alloy 800 Chequered Plate
Check weight & dimensions of Nickel Alloy 800 Shim and Perforated Sheet
| Price list of Incoloy 800 Plate in India | SB 409 Alloy 800H Plate Price in India (INR) | Nickel Alloy 800 Plate Price in UK Pound sterling (kg) | Incoloy 800 Alloy Plate Price in UAE Dirham (kg) |
|---|---|---|---|
| ASME-SB-409 ALLOY 800 COLD ROLLED ANNEALED (UNS N08800) 078/.086X48X120 HEAT#520905 | INR 2,107/kg | 22.78 UK Pound sterling | 108.81 UAE Dirham |
| Grade | C | Mn | Si | Al | S | Cr | Cu | Ni | Fe |
| Incoloy 800 | 0.10 max | 1.50 max | 1 max | 0.15 – 0.60 | 0.015 max | 19.0-23.0 | 0.75 max | 30.0-35.0 | 39.5 min |
Are you searching your specific size and length in Nickel Alloy 800 Foil ? Check our stock with price list
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN | OR |
|---|---|---|---|---|---|---|---|---|
| Incoloy 800 | 1.4876 | N08800 | ЭИ670 | Z8NC32-21 | NCF 800 | NA 15 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800 Chequered Plate | Incoloy 800 Alloy Quarto Plate |
| Nickel Alloy 800 Plate | SB 409 Alloy 800H Rolling Plate |
| Incoloy 800 Alloy Hot Rolled Plate | Incoloy Alloy 800 Perforated Plate |
| SB 409 Alloy 800H Cold Rolled Plate | Alloy 800 Incoloy Bbq Plate |
| Incoloy Alloy 800 Plate 2b Finish | Inconel 800 Diamond Plate |
| Alloy 800 Incoloy Plate Mill Finish | Alloy 800 Inconel Thin Plate |
| Incoloy 800 Din 1.4876 Plate Mirror Finish | Incoloy 800 Nickel Chequered Plate |
| N08800 Alloy 800 Plate Brushed Finish | ASTM B409 Incoloy 800H Hot Rolled Sheet |
| Inconel 800 Clad Plate | Alloy Incoloy 800 Tisco Plate |
| Alloy 800 Inconel Chequer Plate | Incoloy 800 Din 1.4876 Tread Plate |
| Alloy Incoloy 800 Checker Plate | N08800 Alloy 800 Polished Plate |
| Incoloy UNS No 8800 Embossed Plate | Nickel Alloy 800 Plasma Cutting Plate |
| Incoloy 800 Nickel 10mm Plate | Incoloy N08800 Cold Rolled Sheet |
| ASTM B409 Incoloy 800H 1/4 Inch Plate | ASTM B409 800H Incoloy Perforated Sheet |
| Incoloy N08800 Custom Cut Plate | Incoloy UNS No 8800 Sheet |
| ASTM B409 800H Incoloy Checkered Plate | Incoloy 800 Laser Cut Plate |
Know in detail about exact specification of Asme Sb409 Alloy 800 Hot and Cold Rolled Plate with best price Ex Mumbai
Metric Dimensions | ||
|---|---|---|
Surface finish | Thickness (mm) | Width (mm) |
2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
2H – Work hardened | 0.4–6.35 | max. 1524 |
Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions | ||
|---|---|---|
Surface finish | Gauge (in) | Width (in) |
2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
BA Mexinox only | 18–28 | max. 48 |
Polished (not brushed) | 11–24 | max. 60 |
Temper rolled Mexinox only | 13–29 | max. 48 |