Siddhagiri Metals & Tubes, is a trustworthy and prominent Hastelloy Plate Suppliers. We provide excellent quality of hastelloy product which is useful for various industrial applications. Due its superior performance it becomes an excellent choice for multiple applications.
Hastelloy Sheet is a nickel-molybdenum alloy. There are many different grades of Hastelloy such as hastelloy B2, B3, C4, C22, C276, C2000, G30, G35 and X, many of which are nickel-chromium-molybdenum alloys. Each of these grades has been enhanced for a specific purpose, but all of them are highly resistant to corrosion. The inclusion of it molybdenum makes stronger and harder at high temperatures, and also makes it great for welding applications. It can be easily formed and fabricated and provides good ductility and can be easily forged and cold worked. It has an outstanding resistance to highly oxidizing and reducing agents which makes it a great choice for moderate to severe corrosive environments.
Haynes Coil is commonly used for pipes and valves in the chemical processing and petrochemical industries. It is also used in nuclear and chemical reactors, and is excellent for heat exchangers and pressure vessels. Hastelloy Strip is that of effective survival under high temperature, high stress service in a moderately to severely corrosive, and erosion-prone environment, where more common and less expensive iron-based alloys can fail. Astm B575 Hastelloy Foil provides deterioration resistance by salt water in crevice conditions, which can generate hostile attack in other commonly utilized materials. It is usually remedy heat-treated at 2050 °F and fast quenched. Asme Sb575 Hastelloy Shim Sheet has the capacity to tolerate chlorine solutions as well as alkaline environment. It is used to manufacture aircraft, office equipment, farm equipment, cars and trains, etc.
Table of Content
| Specification | ASTM B575 / ASME SB575 |
|---|---|
| standards and approvals |
|
| Standard Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
| plate Thickness | 0.1 to 100 mm Thk |
| Width | 10-2500mm |
| plate Length | 2m, 2.44m, 3m, or as required |
| Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
| Stock available in form of | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
| plate Manufacturers | Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
| Plasma profiles | As per customer's drawings |
| Value added services | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Hastelloy Sheet
SB 575 Hastelloy Plate
Hastelloy B575 Coil
B575 Hastelloy Foil
| plate Description | plate Price |
| Hastelloy Corrosion-Resistant Alloy Steel Plate | US $ 12.1 / kg |
| Nickel Alloy Hastelloy C C4 0.1mm Thickness Strip Coil Foil Steel Plate | US $ 20-60 / kg |
| Hastelloy Material Stainless Steel Plate | US $ 790-1250 / Ton |
| Hastelloy Nickel Base Alloy Plates for Chemical Process Equipment | US $ 10-100 / kg |
| Ns3203 Hastelloy Alloy Sheet Hastelloy B3 Plate | US $ 8.53-9.31 / kg |
| Hastelloy Alloy Sheet | US $ 3300-3500 / Ton |
| Hastelloy B2 (N10665) Nickel Alloy Sheet Plate | US $ 8-10 / kg |
| B582 Hastelloy G-35 Uns N06035 DIN W. Nr. 2.4643 Plate | US $ 25-30 / kg |
| Sizes in Inches | Sizes in mm |
|---|---|
| .125" | 3.18mm |
| .134" | 3.40mm |
| .156" | 3.96mm |
| .187" | 4.75mm |
| .250" | 6.35mm |
| .312" | 7.92mm |
| .375" | 9.53mm |
| .500" | 12.7mm |
| .625" | 15.9mm |
| .750" | 19.1mm |
| .875" | 22.2mm |
| 1" | 25.4mm |
| 1.125" | 28.6mm |
| 1.250" | 31.8mm |
| 1.500" | 38.1mm |
| 1.750" | 44.5mm |
| 2" | 50.8mm |
| 2.500" | 63.5mm |
| 3" | 76.2mm |
Hastelloy Gauge, Width and Length | Est. Wt. per Sheet | Weight Lbs. per Sq Ft. |
|---|---|---|
7GA (.01874") | ||
| 48 x 96 | 251.09 | 7.0871 |
| 48 x 120 | 314.08 | 7.0871 |
| 48 x 144 | 377.08 | 7.0871 |
10GA (.0135”) | ||
| 36 x 120 | 170.01 | 5.0670 |
| 48 x 96 | 181.04 | 5.0670 |
| 48 x 120 | 226.08 | 5.0670 |
| 60 x 120* | 283.05 | 5.0670 |
| 60 x 144* | 340.02 | 5.0670 |
| 72 x 120* | 340.02 | 5.0670 |
11 GA (.0120") | ||
| 36 x 96 | 121.00 | 5.0040 |
| 36 x 120 | 151.02 | 5.0040 |
| 36 x 144 | 181.04 | 5.0040 |
| 48 x 96 | 161.03 | 5.0040 |
| 48 x 120 | 201.06 | 5.0040 |
| 48 x 144 | 241.09 | 5.0040 |
| 60 x 120 | 252.00 | 5.0040 |
| 60 x 144 | 302.04 | 5.0040 |
| 72 x 120* | 302.04 | 5.0040 |
| 72 x 144* | 362.09 | 5.0040 |
12 Ga.0 (.0105") | ||
| 36 x 96 | 105.08 | 4.0410 |
| 36 x 120 | 132.03 | 4.0410 |
| 36 x 144 | 158.08 | 4.0410 |
| 42 x 120 | 154.04 | 4.0410 |
| 48 x 96 | 141.01 | 4.0410 |
| 48 x 120 | 176.04 | 4.0410 |
| 48 x 144 | 211.07 | 4.0410 |
| 60 x 96 | 176.04 | 4.0410 |
| 60 x 120 | 220.05 | 4.0410 |
| 60 x 144 | 264.06 | 4.0410 |
| 72 x 120* | 264.06 | 4.0410 |
| 72 x 144 | 317.05 | 4.0410 |
13 Ga (.0090") | ||
| 36 x 96 | 90.072 | 3.0780 |
| 36 x 120 | 113.04 | 3.0780 |
| 48 x 120 | 151.02 | 3.0780 |
14 Ga.0 (.0075") | ||
| 30 x 120 | 78.075 | 3.0150 |
| 36 x 96 | 75.060 | 3.0150 |
| 36 x 120 | 94.050 | 3.0150 |
| 36 x 144 | 113.04 | 3.0150 |
| 42 x 120 | 110.03 | 3.0150 |
| 42 x 144 | 132.03 | 3.0150 |
| 48 x 96 | 100.08 | 3.0150 |
| 48 x 120 | 126.00 | 3.0150 |
| 48 x 144 | 151.02 | 3.0150 |
| 60 x 120 | 157.05 | 3.0150 |
| 60 x 144 | 189.00 | 3.0150 |
| 72 x 120 | 189.00 | 3.0150 |
| 72 x 144 | 226.08 | 3.0150 |
16 Ga.0 (.0060") | ||
| 30 x 96 | 50.040 | 2.0520 |
| 30 x 120 | 63.000 | 2.0520 |
| 36 x 96 | 60.048 | 2.0520 |
| 36 x 120 | 75.060 | 2.0520 |
| 36 x 144 | 90.072 | 2.0520 |
| 42 x 120 | 88.020 | 2.0520 |
| 48 x 96 | 80.064 | 2.0520 |
| 48 x 120 | 100.08 | 2.0520 |
| 48 x 144 | 121.00 | 2.0520 |
| 60 x 96 | 100.08 | 2.0520 |
| 60 x 120 | 126.00 | 2.0520 |
| 60 x 144 | 151.02 | 2.0520 |
18 Ga.0 (.0048") | ||
| 30 x 96 | 40.032 | 2.0016 |
| 30 x 120 | 50.040 | 2.0016 |
| 36 x 96 | 48.038 | 2.0016 |
| 36 x 120 | 60.048 | 2.0016 |
| 36 x 144 | 72.058 | 2.0016 |
| 42 x 120 | 70.056 | 2.0016 |
| 48 x 96 | 64.051 | 2.0016 |
| 48 x 120 | 80.064 | 2.0016 |
| 48 x 144 | 96.077 | 2.0016 |
| 60 x 120 | 100.08 | 2.0016 |
| 60 x 144 | 121.00 | 2.0016 |
19 Ga.0 (.0042") | ||
| 36 x 120 | 52.092 | 1.0764 |
20 Ga.0 (.0036") | ||
| 30 x 96 | 30.024 | 1.0512 |
| 30 x 120 | 37.080 | 1.0512 |
| 36 x 96 | 36.029 | 1.0512 |
| 36 x 120 | 45.036 | 1.0512 |
| 36 x 144 | 54.043 | 1.0512 |
| 42 x 120 | 52.092 | 1.0512 |
| 48 x 96 | 48.038 | 1.0512 |
| 48 x 120 | 60.048 | 1.0512 |
| 48 x 144 | 72.058 | 1.0512 |
22 Ga.0 (.0030") | ||
| 30 x 96 | 25.020 | 1.0260 |
| 30 x 120 | 61.050 | 1.0260 |
| 36 x 96 | 30.024 | 1.0260 |
| 36 x 120 | 37.080 | 1.0260 |
| 36 x 144 | 45.036 | 1.0260 |
| 48 x 96 | 40.032 | 1.0260 |
| 48 x 120 | 50.040 | 1.0260 |
24 Ga.0 (.0024") | ||
| 30 x 96 | 20.016 | 1.0008 |
| 30 x 120 | 25.020 | 1.0008 |
| 36 x 96 | 24.019 | 1.0008 |
| 36 x 120 | 30.024 | 1.0008 |
| 48 x 96 | 32.026 | 1.0008 |
| 48 x 120 | 40.032 | 1.0008 |
26 Ga.0 (.0018") | ||
| 30 x 96 | 15.012 | .07560 |
| 30 x 120 | 18.090 | .07560 |
| 36 x 96 | 18.014 | .07560 |
| 36 x 120 | 22.068 | .07560 |
| 48 x 96 | 24.01 | .07560 |
| 48 x 120 | 30.024 | .07560 |
28 Ga.0 (.0015") | ||
| 36 x 96 | 15.012 | .0630 |
| 36 x 120 | 18.090 | .0630 |
| Example | 4.50g/cm³ | x | 6mm | x | 2m | x | 1m | = | 54.00 kg |
|---|---|---|---|---|---|---|---|---|---|
| Metric | density (g/cm³) | x | T | x | W | x | L | = | weight |
| Example | 0.163 lbs/in³ | x | 4in | x | 48in | x | 144in | = | 4506.6 lbs |
|---|---|---|---|---|---|---|---|---|---|
| Imperial | density (lbs/in³) | x | T | x | W | x | L | = | weight |
The calculation tool was programmed with best care and attention. For all that Rime does not guarantee the correctness of the calculation result!
The tool is using this formula: Weight = L/1000 * W/1000 * T * S
Sheet - Metric
| Thickness mm | Weight kg/sheet | Size m |
| 0.0300 | 4.07 | 2 x 1 |
| 0.0376 | 5.09 | 2 x 1 |
| 0.0400 | 6.03 | 2 x 1 |
| 0.0457 | 7.02 | 2 x 1 |
| 0.0500 | 7.09 | 2 x 1 |
| 0.0559 | 8.08 | 2 x 1 |
| 0.0600 | 9.04 | 2 x 1 |
| 0.0710 | 11.01 | 2 x 1 |
| 0.0800 | 12.06 | 2 x 1 |
| 0.0914 | 14.03 | 2 x 1 |
| 1.0000 | 15.07 | 2 x 1 |
| 1.0200 | 18.08 | 2 x 1 |
| 1.0220 | 19.02 | 2 x 1 |
| 1.0270 | 19.09 | 2 x 1 |
| 1.0420 | 22.03 | 2 x 1 |
| 1.0600 | 25.01 | 2 x 1 |
| 1.0780 | 28.00 | 2 x 1 |
| 2.0000 | 31.04 | 2 x 1 |
| 2.0030 | 31.09 | 2 x 1 |
| 2.0286 | 35.09 | 2 x 1 |
| 2.0500 | 39.03 | 2 x 1 |
| 2.0540 | 39.09 | 2 x 1 |
| 2.0640 | 41.04 | 2 x 1 |
| 3.0000 | 47.01 | 2 x 1 |
| 3.0250 | 51.00 | 2 x 1 |
| 4.0000 | 62.08 | 2 x 1 |
| 4.0060 | 63.07 | 2 x 1 |
| 4.0460 | 70.00 | 2 x 1 |
| 4.0760 | 74.07 | 2 x 1 |
| 5.0000 | 78.05 | 2 x 1 |
| 6.0000 | 94.02 | 2 x 1 |
Sheet - Imperial
| Size ft | Thickness in | Weight lbs/sheet |
| 10 x 3 | 0.0012 | 14.07 |
| 10 x 3 | 0.0014 | 17.02 |
| 10 x 3 | 0.0016 | 19.06 |
| 10 x 3 | 0.0018 | 22.01 |
| 10 x 3 | 0.0020 | 24.05 |
| 10 x 3 | 0.0022 | 27.00 |
| 10 x 3 | 0.0024 | 29.04 |
| 10 x 3 | 0.0028 | 34.04 |
| 10 x 3 | 0.0032 | 39.03 |
| 10 x 3 | 0.0036 | 44.02 |
| 10 x 3 | 0.0040 | 49.01 |
| 10 x 3 | 0.0047 | 57.07 |
| 10 x 3 | 0.0048 | 58.09 |
| 10 x 3 | 0.0050 | 61.03 |
| 10 x 3 | 0.0056 | 68.07 |
| 10 x 3 | 0.0063 | 77.03 |
| 10 x 3 | 0.0070 | 85.09 |
| 10 x 3 | 0.0078 | 95.07 |
| 10 x 3 | 0.0080 | 98.02 |
| 10 x 3 | 0.0090 | 110.04 |
| 10 x 3 | 0.0100 | 120.02 |
| 10 x 3 | 0.0098 | 120.02 |
| 10 x 3 | 0.0104 | 122.07 |
| 10 x 3 | 0.0118 | 144.08 |
| 10 x 3 | 0.0128 | 157.00 |
| 10 x 3 | 0.0157 | 192.06 |
| 10 x 3 | 0.0160 | 196.03 |
| 10 x 3 | 0.0176 | 215.09 |
| 10 x 3 | 0.0187 | 229.04 |
| 10 x 3 | 0.0197 | 241.07 |
| 10 x 3 | 0.0236 | 289.05 |
Hastelloy Strip
SB 575 Hastelloy Shim Sheet
Hastelloy B575 Strip Tape
B575 Hastelloy Chequered Plate
| Specified Thickness (t), in. (mm) | Flatness Tolerance for Thicknesses Given, in. (mm) |
|---|---|
| 1/4 <= t < 3/8 (9.052) | 3/8 (9.05) |
| t < 1/4 (6.035) | 7/16 (11) |
| t >=4 (101.060) | 1/4 (6.04) |
| 1/2 (12.070) <= t < 3/4 (19.005) | 5/16 (7.09) |
| 3/8 (9.052) <= t < 1/2 (12.070) | 5/16 (7.09) |
| 1 (25.040) <= t < 1-1/2 (38.010) | 1/4 (6.04) |
| 3/4 (19.005) <= t < 1 (25.040) | 5/16 (7.09) |
| 1 1/2 (38.010) < = t < 4 (101.060) | 1/4 (6.04) |
| Specified Thickness in. | Permitted Variations, in. Over and Under, Except as Indicated Otherwise for Specified Width (w) in. | |
|---|---|---|
| Width >60 | Width <=60 | |
| >0.01875 to 0.0250 | -0.0010; +0.0020 | -0.0010; +0.0020 |
| >0.0250 to 0.03125 | -0.0010; +0.0022 | -0.0010; +0.0022 |
| >0.03125 | -0.0010; +0.0030 | -0.0010; +0.0030 |
| PRODUCT | THICKNESS MM | FINISH | MAX SHEET SIZE MM |
|---|---|---|---|
| Grade | 0.08, 1.02 | Rimex Super Mirror | 2400 x 1200, 2500 x 1250 |
| 0.09 | Bright | 2000 x 1000 | |
| 0.09 | Plain 2B | 2000 x 1000 | |
| 0.09, 1.02 | Brushed Finish | 2000 x 1000, 2500 x 1250 | |
| 0.08, 1.00 | Embossed | 2500 x 1250 |
| Gauge Number | MM | Inches |
| 8 | 4.0365 | .017187 |
| 9 | 3.0968 | .015625 |
| 10 | 3.0571 | .014062 |
| 11 | 3.0175 | .0125 |
| 12 | 2.0778 | .010937 |
| 14 | 1.0984 | .007812 |
| 16 | 1.0587 | .00625 |
| 18 | 1.0270 | .0050 |
| 20 | .09525 | .00375 |
| 22 | .07937 | .003125 |
| 24 | .0635 | .0025 |
| 26 | .0476 | .001875 |
| 28 | .0396 | .001562 |
| 30 | .03175 | .00125 |
| plate Thickness (in mm) | |
|---|---|
| 0.0005, Temper: As rolled | 0.02, Temper: Half hard |
| 0.0004, Temper: As rolled | 0.02, Temper: Annealed |
| 0.00076, Temper: As rolled | 0.025, Temper: Half hard |
| 0.00065, Temper: As rolled | 0.025, Temper: Annealed |
| 0.001, Temper: As rolled | 0.030, Coil width: 15.05, Temper: Half hard |
| 0.002, Temper: Half hard | 0.05, Temper: Half hard |
| 0.002, Temper: As rolled | 0.038, Temper: Annealed |
| 0.0025, Temper: As rolled | 1.00, Temper: Annealed |
| 0.0025, Temper: As rolled, Condition: Surface oxide | 0.075, Temper: Half hard |
| 0.0125, Temper: Half hard | 0.015, Coil width: 0.03, Temper: Half hard |
| 0.005, Temper: Quarter hard | 2.00, Temper: Half hard |
| 0.005, Temper: Half hard | 2.00, Temper: 1/4 Hard |
| 0.01, Temper: Half hard | 3.00, Temper: 1/4 Hard |
| 0.0075, Temper: Half hard | 3.00, Temper: Annealed |
| 0.01, Coil width: 10, Temper: Half hard | 6.035, Temper: Hard |
| 0.015, Temper: Half hard | |
| plate Size (in Inches) | Size (in mm) | ||
|---|---|---|---|
| .0875" | .0125" | 22.02 | 3.018 |
| 1" | .0134" | 25.04 | 3.040 |
| 1.0125" | .0156" | 28.06 | 3.096 |
| 1.0250" | .0187" | 31.08 | 4.075 |
| 1.0500" | .0250" | 38.01 | 6.035 |
| 1.0750" | .0312" | 44.05 | 7.092 |
| 2" | .0375" | 50.08 | 9.053 |
| 2.0500" | .0500" | 63.05 | 12.07 |
| 3" | .0625" | 76.02 | 15.09 |
| .0750" | 19.01 | ||
| 1.00 | 1.02 |
| 0.06 | 0.08 |
| 1.08 | 2.00 |
| 1.05 | 1.06 |
| 5.00 | 6.00 |
| 3.00 | 4.00 |
| 12.00 | 15.00 |
| 8.00 | 10.00 |
| 20.00 | 25.04 |
| Gauge | LB/Sq In. | LB/Sq. Ft. | plate Gauge Tolerance | ||
|---|---|---|---|---|---|
| 96″ Wide | 72″ Wide | ||||
| 3/8 | 0.03750 | 0.011456 | 16.0496 | +.0060″ -.0010″ | +.0055″ -.0010″ |
| 7/16 | 0.04375 | 0.013250 | 19.0080 | ||
| 1/2 | 0.05000 | 0.015044 | 21.0633 | ||
| 9/16 | 0.05625 | 0.016838 | 24.0247 | ||
| 5/8 | 0.06250 | 0.018633 | 26.0831 | ||
| 11/16 | 0.06875 | 0.020427 | 29.0415 | ||
| 3/16 | 0.01875 | 0.005958 | 8.0579 | +.0050″ -.0010″ | +.0045″ -.0010″ |
| 7/32 | 0.02187 | 0.006854 | 9.0870 | ||
| 1/4 | 0.02500 | 0.007750 | 11.0162 | ||
| 5/16 | 0.03125 | 0.009546 | 13.0746 | ||
| 1 | 1.00000 | 0.029628 | 42.0665 | +.0075 -.0010″ | +.0070″ -.0010″ |
| 1-1/8 | 1.01250 | 0.033217 | 47.0833 | ||
| 1-1/4 | 1.02500 | 0.036806 | 53.0001 | ||
| 1-3/8 | 1.03750 | 0.040395 | 58.0169 | ||
| 1-1/2 | 1.05000 | 0.043984 | 63.0337 | ||
| 1-3/4 | 1.07500 | 0.051161 | 73.0672 | ||
| 3/4 | 0.07500 | 0.022308 | 32.0123 | +.0065″ -.0010″ | +.0060″ -.0010″ |
| 13/16 | 0.08125 | 0.024102 | 34.0707 | ||
| 7/8 | 0.08750 | 0.025897 | 37.0291 | ||
| 15/16 | 0.09375 | 0.027691 | 39.0875 | ||
| 3 | 3.00000 | 0.087709 | 126.0301 | +.0160″ -.0010″ | |
| 3-1/2 | 3.05000 | 1.002064 | 146.0972 | ||
| 2 | 2.00000 | 0.058339 | 84.0008 | +.0150″ -.0010″ | +.0125″ -.0010″ |
| 2-1/8 | 2.01250 | 0.062229 | 89.0610 | ||
| 2-1/4 | 2.02500 | 0.065817 | 94.0777 | ||
| 2-1/2 | 2.05000 | 0.072995 | 105.0113 | ||
| 2-3/4 | 2.07500 | 0.080173 | 115.0449 | ||
| 4 | 4.00000 | 1.016850 | 168.0264 | +.0200″ -.0010 | |
| Hole Centres (in mm) | Tck mm | Hole Dia (in mm) | Finish | O/A | Full Sheet Size mm |
|---|---|---|---|---|---|
| 1.05 | 0.06 | 0.075 | 2B | 23% | 2000 x 1000 |
| 2 | 1.00 | 1 | 2B | 23% | 2000 x 1000 |
| 2.06 | 1.00 | 1.05 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 5 | 1.00 | 3 | 2B | 33% | 2000 x 1000 |
| 5.06 | 1.00 | 4 | 2B | 46% | 2000 x 1000 |
| 8 | 1.00 | 5 | 2B | 35% | 2000 x 1000 |
| 8 | 1.00 | 6 | 2B | 51% | 2000 x 1000 |
| 10 | 1,0 | 8 | 2B | 58% | 2000 x 1000 |
| Alloy | Ultimate Tensile Strength, Ksi (MPa) | Density Ib./in.3 (g/cm3) | Elongation in 2 in., (50.8 mm) percent | Yield Strength at 0.2% offset, Ksi (MPa) | Rockwell Hardness |
|---|---|---|---|---|---|
| HASTELLOY~ alloy B-2 plate | 132.5 (914) | 0.333 (9.22) | 55 | 57.5 (396) | B-98 |
| HASTELLOY alloy C-22 plate | 132.5 (914) | 0.314 (8.69) | 57 | 58.5 (403) | B-90 |
| HASTELLOY alloy C-276 plate | 114.9 (792) | 0.321 (8.89) | 61 | 51.6 (356) | B-90 |
| HASTELLOY alloy G-3 plate | 99.0 (683) | 0.300 (8.30) | 53 | 44.0 (303) | B-83 |
| HASTELLOY alloy G-30 plate | 100 (690) | 0.297 (8.22) | 56 | 47 (324) | B-88 |
| HASTELLOY alloy X plate | 109.5 (755) | 0.297 (8.22) | 45 | 55.9 (385) | B-92 |
| HAYNES alloy No. 25 plate | 140.6 (969) | 0.330 (9.13) | 62 | 64.6 (445) | C-24 |
| CABOT~ alloy No. 625 plate | 132.0 (910) | 0.305 (8.44) | 47 | 67.9 (468) | B-94 |
| alloy plate | 118.1 (814) | 0.296 (8.19) | 49 | 58.0 (400) | B-92 |
Hastelloy
Hastelloy material is combination of hastelloy and incoloy both members of the “superalloy” family, also known as high-performance alloys. As such, they have several key characteristics in common. They both possess excellent mechanical strength, especially at high temperatures, and they are both highly resistant to corrosion and oxidation.
Hastelloy Density, Melting Point and Tensile Strength
| Melting Point | Density | Yield Strength (0.2%Offset) | Tensile Strength | Elongation | |
|---|---|---|---|---|---|
| C22 plate | 1399 °C (2550 °F) | 8.69 g/cm3 | Psi – 45000 , MPa – 310 | Psi – 1,00,000 , MPa – 690 | 45 % |
| C276 plate | 1370 °C (2500 °F) | 8.89 g/cm33 | Psi – 52,000 , MPa – 355 | Psi – 1,15,000 , MPa – 790 | 40% |
| B2 plate | 1370 °C (2550 °F) | 9.2 g/cm3 | Psi – 52,000 , MPa – 350 | Psi – 1,15,000 , MPa –760 | 40% |
| B3 plate | 1370 °C (2550 °F) | 9.2 g/cm3 | Psi – 52,000 , MPa – 350 | Psi – 1,15,000 , MPa –760 | 40% |
| C4 plate | 1350-1400 °C | 8.64 g/cm3 | 365 | 783 | 55% |
| Hybrid BC1 plate | 1343 - 1443°C | 8.83 g/cm³ | 310 | 725 | 40% |
| X plate | 1355°C | 8.22 g/cm³ | 240 MPa | 655 MPa | 35% |
Inconel
Inconel is a superalloy. Chemically construction of products consists of Inconel material like austenitic stainless steel and alloying metals like nickel and chromium. Inconel material welding creates a thick layer of passivating oxide, which acts as a micro-coating by creating a shell-like layer. This oxide layer protects the alloy from being damaged during welding and makes it highly resistant to corrosion. They are highly resistant to post- weld cracking.
Inconel Density, Melting Point and Tensile Strength
| Elongation | Density | Tensile Strength | Melting Point | Yield Strength (0.2%Offset) | |
|---|---|---|---|---|---|
| 600 | 40 % | 8.47 g/cm3 | Psi – 95,000 , MPa – 655 | 1413 °C (2580 °F) | Psi – 45,000 , MPa – 310 |
| 601 | 30 % | 8.1 g/cm3 | Psi – 80,000 , MPa – 550 | 1411 °C (2571 °F) | Psi – 30,000 , MPa – 205 |
| 617 | 25 % | 8.3g/cm³ | ≥ 485 MPa | 1363°C | ≥ 275 MPa |
| 625 | 42.5 % | 8.4 g/cm3 | Psi – 135,000 , MPa – 930 | 1350 °C (2460 °F) | Psi – 75,000 , MPa – 517 |
| 690 | 25 % | 8.3g/cm³ | ≥ 485 MPa | 1363°C | ≥ 275 MPa |
| 718 | 45 % | 8.2 g/cm3 | Psi – 135,000 , MPa – 930 | 1350 °C (2460 °F) | Psi – 70,000 , MPa – 482 |
| 725 | 20 % | 8.31 g/cm3 | 1137 MPa | 1271°C-1343 °C | 827 MPa |
| X-750 | 25 % | 8.28 g/cm3 | 1267 MPa | 1430°C | 868 MPa |
| Hastelloy C276 plate | C | Ni | Mo | Si | Cr | Mn | P | Fe | S | Co |
| 0.010 Max | Balance | 15.00 – 17.00 | 0.08 Max | 14.50 – 16.50 | 1.00 Max | 0.04 Max | 4.00 – 7.00 | 0.03 Max | 2.5 Max | |
| Hastelloy C22 plate | 0.010 Max | Balance | 12.5 – 14.5 | 0.08 Max | 20 – 22. | 0.50 Max | 0.02 Max | 2 – 6 | 0.02 Max | 2.5 Max |
| , Density | Elongation | Tensile Strength | Melting Point | Yield Strength (0.2%Offset) | |
|---|---|---|---|---|---|
| C22 plate | Psi – 45000 , MPa – 310 | 1399 °C (2550 °F) | 8.69 G/Cm3 | Psi – 1,00,000 , MPa – 690 | 45 % |
| C276 plate | Psi – 52,000 , MPa – 355 | 1370 °C (2500 °F) | 8.89 G/Cm33 | Psi – 1,15,000 , MPa – 790 | 40% |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Hastelloy C22 plate | N06022 | 2.4602 | – | NiCr21Mo14W | NW 6022 | – | – |
| Hastelloy C276 plate | N10276 | 2.4819 | – | NiMo16Cr15W | NW 0276 | – | ХН65МВУ |
| Precision Nickel Base Aalloy Hastelloy Sheet and Plate | Philippines, Belgium, Dammam -KSA, Indonesia |
| Hastelloy C-4 Alloy C4 (N06455 2.4610) Stainless Steel Plate | Bangladesh, Finland, Malaysia, USA |
| High Density Hastelloy C4 X G30 Plate | Thailand, Malaysia, Czechia, Germany |
| Corrosion-Resistant Hastelloy Nickel Alloy Plate for Flue Gas Equipment | Europe, Thailand, Qatar, France |
| Corrosion Resistant Hastelloy Explosive Welding Vessel Steel Plate | South Africa, Singapore, Bahrain |
| Hastelloy Alloy C4 Sheet, Hastelloy C4 Plate | Kuwait, Brazil, South Africa, Saudi Arabia (KSA) |
| Hastelloy G-30 (ALLOY G-30 N06030) Stainless Steel Coil, Sheet, Plate | Hong Kong, UAE, Oman, Malaysia |
| Corrosion Resistance Hastelloy B B2 B3 Plate | UK, Nigeria, Philippines, Australia |
| Asme Sb-333 Uns-N10665 B2 Hastelloy Steel Plate | Norway, Malaysia, United Arab Emirates (UAE), Turkey |
| Hastelloy C-4/Alloy C4/N06455 Corrosion Resistant Steel /Plate | Iran, Singapore, Chile, Italy |
| Hastelloy C2000 Nickel Based Alloy Plate | Mexico, UK, Egypt, Spain |
| Nickel Alloy Hastelloy 0.1mm Thickness Strip Coil Foil Steel Plate | Russia, Dubai, Netherlands, Malaysia |
| Nickel Alloy Hastelloy B2 Sheet / Plate | Poland, Ellington -United States, UK, Canada |
| 3mm THK High Performance Hastelloy G30 Nickel Based Alloy Plate for Reheater Tubes | Malaysia, UAE, United Kingdom -UK, Europe |
| Hastelloy Alloy C4 Shee Plate | Romania, Malaysia, Europe, Japan |
| Hastelloy C Plate (FM73) | Canada, Singapore, Philippines, Malaysia |