Duplex stainless steel grade Duplex 2205 Round Bar is one of the most dynamic players in the machining industry all across the world. With the magnificent property of corrosion resistance, these duplex stainless steel round bars are engaged in manufacturing industries which have been indulged in the production of fasteners as well as machineries. These Duplex 2205 Rod has been treated with calcium tend to be of free machining grades .
Table of Content
Hence, these bars require a higher cutting speed and are able to offer a longer tool life. Most 2205 Round Bar suppliers in India prefer to order these duplex grade stainless steel bars in the form of precision straightened and avail mirror finish surfaces. This specialty 2205 Duplex Stainless Steel Bar could be widely employed in the production of different machine parts across various sectors. For instance, the Duplex 2205 Round Bar is seen in application for industries such as Atomic energy, nuclear power, Construction, Aerospace, aviation, Boiler heat exchanger, Ocean development, Food, environmental protection, Petroleum, chemical industries. Typically, 2205 Stainless Round Bar are delivered in either Hot Forged, Hot Rolled, Pickled, Bead Blasted, Peeled or a Cold Drawn condition.
Duplex 2205 Stainless Steel Rebar, also referred to as reinforcement bars are used in various applications to improve the tensile strength of the concrete. As a material of construction, although concrete is very weak in tension, it has strong compression properties. Duplex grade stainless Steel 2205 is only used as rebar due to the elongation of steel, which occurs at high temperatures or when the thermal expansion coefficient nearly equals to that of concrete material.
Duplex 2205 Stainless Steel Spigots are referred to as the end connection of a fitting which needs to be assembled into another fitting. The spigot end of any fitting typically has the same outside diameter as that of a pipe.
The specification for ASTM A276 standard covers both hot- finished or cold- finished bars with the exception of bars which are meant for reforging. The ASTM A276 Type 2205 specification includes several forms of bars such as squares, rounds, and hexagons, as well as either hot- rolled or extruded shapes, like either angles, tees, or channels in the more commonly used kinds of stainless steel grades. The bars must be furnished in either one of the following conditions: Condition A is in which the bars need to be in an annealed condition. The bars that fall under Condition H are those which have been hardened as well as tempered at a relative temperature. Similar to condition H, Condition T bars are those bars, which are hardened and tempered at a relatively high temperature. Those bars belonging to the category of Condition S have to be either strain hardened or relatively light cold worked, while Condition B is in which the bars have been relatively severe cold worked. The ASTM A276 Type 2205 needs to be subjected to a mechanical test in order to determine its properties such as tensile strength, yield strength, elongation, and Brinell hardness.
Generally, the use of a 2205 Flat Bar is in the applications of the construction industries in the form of both base plates and brackets . similar to round bars, the 2205 Duplex Flat Bar can be finished in a hot rolled annealed and pickled (HRAP) finish. To ensure exceptional uniformity in the product quality, the stainless steel Flat Alloy 2205 Bar undergoes numerous high- tech production procedures. First, the steel 2205 Duplex Rod has been hot rolled followed by which the alloy is then annealed to release stress. This process ensures that the 2205 Stainless Steel Rod receives the highest level of resistance against corrosion. In the final step, a pickling process is performed on the alloy by immersing the prepared steel in to a compound solution in order to remove any marks or scale on the surface of the 2205 Stainless Bar.
2205 Hollow Bar can otherwise be referred to as seamless mechanical tubing. This type of a bar is a tubular product, which has been made with characteristics as well as properties that are well suited for subsequent transformation. These transformations include a great variety of hollow products & cylindrical components meant for use in general engineering purposes. Carbon and alloy steel hollow bars such as Saf 2205 Bar are normally supplied in the form of circular sections although other shapes are available on request .
We are the largest 2205 Round Bar suppliers in India. Click on the link given here for a list of Duplex 2205 Bar Stock produced by our factory. Specializing in manufacturing various Duplex 2205 Round Bar since 1999.
Specification | ASTM A276/ ASME SA276 |
---|---|
Round bar size | Diameter: 3-~800mm |
Hex Bar size | 2-100mm A/F |
Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Square bar size | 4 to 100mm |
Angle bar size (in mm) | 3*20*20~12*100*100 |
Section | 3.0 to 12.0mm thickness |
Channel Bar (in mm) | 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
Hollow Bar (in mm) | 32 OD x 16 ID to 250 OD x 200 ID) |
Billet Size | 1/2" to 495mm Diameter |
Rectangles Size | 33 x 30mm to 295 x 1066mm |
Manufacturing Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Processing | Bar cutting to 650mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
2205 Duplex Stainless Steel Hex Bar
Duplex Steel UNS S32205 Round Bar
Duplex SS 2205 Flat Bar
WERKSTOFF NR. 1.4462 Square Bar
ASTM A276 Duplex 2205 Annealed Bar
2205 Duplex Stainless Flat Bar Hot Rolled
Saf 2205 Bright Bar
ASME SA276 Duplex SS 2205 Black Bar
Grade | Duplex Round Bar Price per kg in INR | Duplex Steel Bar Price per kg in USD | Duplex Round Bar Price in UAE Dirham |
---|---|---|---|
Duplex Round Bar Price per kg in India | INR 290-350 Per Kg | USD $ 3.98-5.03 Per Kg | AED 14.55-18.48 Per Kg |
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
Fe |
S31803 |
0.030 max |
2.00 max |
1.00 max |
0.030 max |
0.020 max |
22.0 – 23.0 |
3.0 – 3.5 |
4.50 – 6.50 |
0.14 – 0.20 |
63.72 min |
S32205 |
0.030 max |
2.00 max |
1.00 max |
0.030 max |
0.020 max |
21.0 – 23.0 |
2.50 – 3.50 |
4.50 – 6.50 |
0.8 – 0.20 |
63.54 min |
S31803 / S32205 | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
STANDARD | WERKSTOFF NR. | UNS |
Duplex 2205 | 1.4462 | S31803 / S32205 |
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
Belgium, Indonesia, Philippines, Dammam -KSA | Cold Drawn High Precision JIS Duplex 2205 Stainless Steel Bright Round Bar |
Thailand, France, Europe, Qatar | Cold Drawn Polish Finish Duplex 2205 Stainless Steel Rod |
Malaysia, Germany, Thailand, Czechia | duplex stainless steel round bar 2205 rod dia 6mm |
Finland, USA, Bangladesh, Malaysia | 20mm Duplex 2205 solid Round bar |
Brazil, Saudi Arabia (KSA), Kuwait, South Africa | Alloy 2205 Stainless Steel Round Bar 2mm, 3mm, 6mm Metal Rod |
Singapore, South Africa, Singapore, Bahrain | Duplex stainless steel round bar/rod from 5mm to 250mm diameter |
Nigeria, Australia, UK, Philippines | Duplex 2205 stainless steel bar rod with diameter 10mm |
UAE, Malaysia, Hong Kong, Oman | 1~1500mm Diameter ASTM Duplex 2205 Round Stainless Steel Bar |
Singapore, Italy, Iran, Chile | Cold Rolled 2205 Duplex Stainless Steel Bar |
Malaysia, Turkey, Norway, United Arab Emirates (UAE) | 2205 Stainless Steel Round Bar Black Surface |
Dubai, Malaysia, Russia, Netherlands | Flat Steel Bar in Duplex 2205 |
UK, Spain, Mexico, Egypt | 6mm Stainless Steel Round Super Duplex Bar |
UAE, Europe, Malaysia, United Kingdom -UK | 2205 Stainless Steel U Channel Bar |
Ellington -United States, Canada, Poland, UK | 30mm Duplex Stainless Steel Round Bar |
Singapore, Malaysia, Canada, Philippines | 89mm 2205 Cold Drawn Stainless Steel Bar |
Malaysia, Japan, Romania, Europe | 2mm 3mm 6mm Cold Drawn Duplex Round Bar |
China, Colombia, Malaysia, Sweden | Stainless Steel U Channel Bar of 2205 Hot Rolled/Cold Rolled |
Philippines, Taiwan, Los Alamos -Mexico, Malaysia | 50mm Bright Duplex Round Bar 2205 |
H&T | Hardened and tempered. |
ANN | Annealed |
PH | Precipitation hardened. |
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
---|---|---|---|
ASTM A276 Duplex Cold Drawn and Polish Round Bar | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
---|---|---|---|---|---|---|---|
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.625 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Tolerances for Cold Drawn | ||
---|---|---|
Shape / Section | Size, diameter or width across flats | Permitted variation |
mm | mm | |
Round | ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 | + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140 |
Flat (thickness) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.250, + 0 to - 0.350 |
Flat (width) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.190, + 0 to - 0.220, + 0 to - 0.350, + 0 to - 1.00, + 1.00 to - 1.00 |
Square and, hexagon | ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 | + 0 to - 0.090, + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.250 |
Turned Tolerances | |
---|---|
Size, diameter | Permitted variation |
mm | mm |
≧ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 120, > 120 ≦ 180, > 180 ≦ 250, > 250 ≦ 315, > 315 ≦ 400, > 400 | + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140, + 0 to - 0.160, + 0 to - 0.185, + 0 to - 0.210, + 0 to - 0.230, + 0 to - 0.250 |
Precision Tolerances | ||||
---|---|---|---|---|
Section | Size,, diameter | Permitted overall variation | ||
Class A | Class B | Class C | ||
mm | mm | mm | mm | |
Round | ≧ 6 <75 | 0.05 | 0.025 | 0.013 |
Tolerance ISO “H” Series in MM | ||||||||
---|---|---|---|---|---|---|---|---|
NOMINAL SIZE | h5 | h6 | h7 | h8 | h9 | H10 | H11 | h12 |
DIAMETER mm | ||||||||
~ to 3 | +0.004/0 | +0.006/0 | +0.01/0 | +0.014/0 | +0.025/0 | +0.04/0 | +0.06/0 | +0.1/0 |
over 3 to 6 | +0.005/0 | +0.008/0 | +0.012/0 | +0.018/0 | +0.03/0 | +0.048/0 | +0.075/0 | +0.12/0 |
over 6 to 10 | +0.006/0 | +0.009/0 | +0.015/0 | +0.022/0 | +0.036/0 | +0.058/0 | +0.09/0 | +0.15/0 |
over 10 to 18 | +0.008/0 | +0.011/0 | +0.018/0 | +0.027/0 | +0.043/0 | +0.07/0 | +0.11/0 | +0.18/0 |
over 18 to 30 | +0.009/0 | +0.013/0 | +0.021/0 | +0.033/0 | +0.052/0 | +0.084/0 | +0.13/0 | +0.21/0 |
over 30 to 50 | +0.011/0 | +0.016/0 | +0.025/0 | +0.039/0 | +0.062/0 | +0.1/0 | +0.16/0 | +0.25/0 |
over 50 to 80 | +0.013/0 | +0.019/0 | +0.03/0 | +0.046/0 | +0.074/0 | +0.12/0 | +0.19/0 | +0.3/0 |
over 80 to 120 | +0.015/0 | +0.022/0 | +0.035/0 | +0.054/0 | +0.087/0 | +0.14/0 | +0.22/0 | +0.35/0 |
over 120 to 180 | +0.018/0 | +0.025/0 | +0.04/0 | +0.063/0 | +0.1/0 | +0.16/0 | +0.25/0 | +0.4/0 |
over 180 to 250 | +0.02/0 | +0.029/0 | +0.046/0 | +0.072/0 | +0.115/0 | +0.185/0 | +0.29/0 | +0.46/0 |
Duplex 2205 Round Bar | Inox Duplex 2205 Flat Bar |
Avesta 2205 Bar | Lean Duplex 2205 Flat Bar Black |
Duplex 2205 Steel Rounds | Duplex Type 2205 Flat Bar Bright |
Duplex 2205 Alloy Bright Bar | Duplex SS 2205 Rod |
Duplex 2205 Stainless Steel Rods | 2205 Duplex 1.4462 Flat Bar Cold Drawn |
2205 Duplex Round Bars | Duplex 2205 F60 Flat Bar stock |
2205 Duplex Steel Hex Bar | 1.4462 duplex 2205 Threaded Bar |
22cr Duplex Square Bar Black | Duplex 2205 Grade F51 Flat Bar Annealed |
2205 Stainless Steel Hex Bar Black | 1.4462 saf 2205 Square Rod |
2205 Duplex Stainless Steel Hex Bar Bright | 22Cr Duplex Stainless Steel Hollow Bar |
Duplex 2205 Alloy Square Bar Polished | Duplex Stainless Steel 22 cr Cold Drawn Round Bar |
Alloy 2205 Hex Bar Cold Drawn | 22Cr Duplex Stainless Triangular Bar |
Duplex Stainless Steel 2205 Hex Bar Annealed | DSS 2205 Polished Bar |
22 Cr Duplex Steel Forged Bar | 2205 DSS Polished Flat Bar |
22 Cr Super Duplex Square Bar | Duplex 2205 Werkstoff 1.4462 Flat Bar Polished |
2205 Duplex SS Hex Bar Polished | 22Cr Duplex Steel Hexagonal Bar |
Duplex 2205 AISI Square Bar Bright | Duplex Stainless Steel Grade 2205 Rectangular Bar |
Saf 2205 Duplex Stainless Steel Rectangular Bar Black | ASTM A276 Type 2205 Duplex Polished Hex Bar |
Duplex 2205 F51 Rectangular Bar Bright | Duplex 2205 Grade Rectangular Bar Polished |