A number of sheets made up of different alloys and metals are used in a wide variety of applications. Copper Sheet Metal is one amongst those many. These sheets have excellent finish and high strength. These Copper Strip display high strength and are good conductors of electricity. They have high tensile strength and technical precision.
Copper Foil offers low maintenance cost and has high durability. Due to these reasons, they are used in making terminals, switches, keys, radiators, taps, and locks. Moreover, they are also used in producing connectors, general stamping, icons, statues, and deep drawing articles. They also display thermal conductivity and are widely recommended by Copper Plate Manufacturer In Mumbai.
Astm B152 Uns C12200 Copper Coil can be tempered using hot rolling, cold rolling, or annealing procedures. Certain specifications require these sheets to be passed through various tests including embrittlement tests. Since copper showcases excellent malleability and formidability.
Copper Sheet Manufacturers In India mostly recommend this due to all the above mentioned qualities and the ability of the metal to carry out any function that it is put through with precision. This reduces the cost of production in any mechanical system and improves efficiency.
Hot Rolled Copper Sheets Price varies from country to country. However, these sheets are available at comparatively cheaper rates in India than abroad. We are among the leading manufacturers and suppliers of these sheets in India and our customer base is extended to various countries. Our quality and on time delivery make us stand among the leaders in the supply chain.
Table of Content
| Standards and approvals |
|
|---|---|
| Standard Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
| Thickness | 0.1 to 100 mm Thk |
| Width | 10-2500mm |
| Length | 2m, 2.44m, 3m, or as required |
| Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
| Stock available in form of | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
| Manufacturers | Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
| Plasma profiles | As per customer's drawings |
| Value added services | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| Thickness | Width | Length | Price |
|---|---|---|---|
| OFHC Cu Sheet .025" | 12" | 12" | $25.55 |
| OFHC Cu Sheet .025" | 12" | 48" | $84.42 |
| OFHC Cu Sheet .025" | 36" | 48" | $150.27 |
| OFHC Cu Sheet .032" | 12" | 12" | $30.43 |
| OFHC Cu Sheet .032" | 12" | 48" | $105.60 |
| Gauge Number |
MM | Inches |
| 8 | 4.0365 | .017187 |
| 9 | 3.0968 | .015625 |
| 10 | 3.0571 | .014062 |
| 11 | 3.0175 | .0125 |
| 12 | 2.0778 | .010937 |
| 14 | 1.0984 | .007812 |
| 16 | 1.0587 | .00625 |
| 18 | 1.0270 | .0050 |
| 20 | .09525 | .00375 |
| 22 | .07937 | .003125 |
| 24 | .0635 | .0025 |
| 26 | .0476 | .001875 |
| 28 | .0396 | .001562 |
| 30 | .03175 | .00125 |
| Size (in Inches) | Size (in mm) | ||
|---|---|---|---|
| .0875" | .0125" | 22.02 | 3.018 |
| 1" | .0134" | 25.04 | 3.040 |
| 1.0125" | .0156" | 28.06 | 3.096 |
| 1.0250" | .0187" | 31.08 | 4.075 |
| 1.0500" | .0250" | 38.01 | 6.035 |
| 1.0750" | .0312" | 44.05 | 7.092 |
| 2" | .0375" | 50.08 | 9.053 |
| 2.0500" | .0500" | 63.05 | 12.07 |
| 3" | .0625" | 76.02 | 15.09 |
| .0750" | 19.01 | ||
| 1.00 | 1.02 |
| 0.06 | 0.08 |
| 1.08 | 2.00 |
| 1.05 | 1.06 |
| 5.00 | 6.00 |
| 3.00 | 4.00 |
| 12.00 | 15.00 |
| 8.00 | 10.00 |
| 20.00 | 25.04 |
| Example | 4.50g/cm³ | x | 6mm | x | 2m | x | 1m | = | 54.00 kg |
|---|---|---|---|---|---|---|---|---|---|
| Metric | density (g/cm³) | x | T | x | W | x | L | = | weight |
| Example | 0.163 lbs/in³ | x | 4in | x | 48in | x | 144in | = | 4506.6 lbs |
|---|---|---|---|---|---|---|---|---|---|
| Imperial | density (lbs/in³) | x | T | x | W | x | L | = | weight |
The calculation tool was programmed with best care and attention. For all that Rime does not guarantee the correctness of the calculation result!
The tool is using this formula: Weight = L/1000 * W/1000 * T * S
| Thickness (in mm) | |
|---|---|
| 0.0005, Temper: As rolled | 0.02, Temper: Half hard |
| 0.0004, Temper: As rolled | 0.02, Temper: Annealed |
| 0.00076, Temper: As rolled | 0.025, Temper: Half hard |
| 0.00065, Temper: As rolled | 0.025, Temper: Annealed |
| 0.001, Temper: As rolled | 0.030, Coil width: 15.05, Temper: Half hard |
| 0.002, Temper: Half hard | 0.05, Temper: Half hard |
| 0.002, Temper: As rolled | 0.038, Temper: Annealed |
| 0.0025, Temper: As rolled | 1.00, Temper: Annealed |
| 0.0025, Temper: As rolled, Condition: Surface oxide | 0.075, Temper: Half hard |
| 0.0125, Temper: Half hard | 0.015, Coil width: 0.03, Temper: Half hard |
| 0.005, Temper: Quarter hard | 2.00, Temper: Half hard |
| 0.005, Temper: Half hard | 2.00, Temper: 1/4 Hard |
| 0.01, Temper: Half hard | 3.00, Temper: 1/4 Hard |
| 0.0075, Temper: Half hard | 3.00, Temper: Annealed |
| 0.01, Coil width: 10, Temper: Half hard | 6.035, Temper: Hard |
| 0.015, Temper: Half hard | |
Sheet - Metric
| Thickness mm |
Weight kg/sheet |
Size m |
| 0.0300 | 4.07 | 2 x 1 |
| 0.0376 | 5.09 | 2 x 1 |
| 0.0400 | 6.03 | 2 x 1 |
| 0.0457 | 7.02 | 2 x 1 |
| 0.0500 | 7.09 | 2 x 1 |
| 0.0559 | 8.08 | 2 x 1 |
| 0.0600 | 9.04 | 2 x 1 |
| 0.0710 | 11.01 | 2 x 1 |
| 0.0800 | 12.06 | 2 x 1 |
| 0.0914 | 14.03 | 2 x 1 |
| 1.0000 | 15.07 | 2 x 1 |
| 1.0200 | 18.08 | 2 x 1 |
| 1.0220 | 19.02 | 2 x 1 |
| 1.0270 | 19.09 | 2 x 1 |
| 1.0420 | 22.03 | 2 x 1 |
| 1.0600 | 25.01 | 2 x 1 |
| 1.0780 | 28.00 | 2 x 1 |
| 2.0000 | 31.04 | 2 x 1 |
| 2.0030 | 31.09 | 2 x 1 |
| 2.0286 | 35.09 | 2 x 1 |
| 2.0500 | 39.03 | 2 x 1 |
| 2.0540 | 39.09 | 2 x 1 |
| 2.0640 | 41.04 | 2 x 1 |
| 3.0000 | 47.01 | 2 x 1 |
| 3.0250 | 51.00 | 2 x 1 |
| 4.0000 | 62.08 | 2 x 1 |
| 4.0060 | 63.07 | 2 x 1 |
| 4.0460 | 70.00 | 2 x 1 |
| 4.0760 | 74.07 | 2 x 1 |
| 5.0000 | 78.05 | 2 x 1 |
| 6.0000 | 94.02 | 2 x 1 |
Sheet - Imperial
| Size ft |
Thickness in |
Weight lbs/sheet |
| 10 x 3 | 0.0012 | 14.07 |
| 10 x 3 | 0.0014 | 17.02 |
| 10 x 3 | 0.0016 | 19.06 |
| 10 x 3 | 0.0018 | 22.01 |
| 10 x 3 | 0.0020 | 24.05 |
| 10 x 3 | 0.0022 | 27.00 |
| 10 x 3 | 0.0024 | 29.04 |
| 10 x 3 | 0.0028 | 34.04 |
| 10 x 3 | 0.0032 | 39.03 |
| 10 x 3 | 0.0036 | 44.02 |
| 10 x 3 | 0.0040 | 49.01 |
| 10 x 3 | 0.0047 | 57.07 |
| 10 x 3 | 0.0048 | 58.09 |
| 10 x 3 | 0.0050 | 61.03 |
| 10 x 3 | 0.0056 | 68.07 |
| 10 x 3 | 0.0063 | 77.03 |
| 10 x 3 | 0.0070 | 85.09 |
| 10 x 3 | 0.0078 | 95.07 |
| 10 x 3 | 0.0080 | 98.02 |
| 10 x 3 | 0.0090 | 110.04 |
| 10 x 3 | 0.0100 | 120.02 |
| 10 x 3 | 0.0098 | 120.02 |
| 10 x 3 | 0.0104 | 122.07 |
| 10 x 3 | 0.0118 | 144.08 |
| 10 x 3 | 0.0128 | 157.00 |
| 10 x 3 | 0.0157 | 192.06 |
| 10 x 3 | 0.0160 | 196.03 |
| 10 x 3 | 0.0176 | 215.09 |
| 10 x 3 | 0.0187 | 229.04 |
| 10 x 3 | 0.0197 | 241.07 |
| 10 x 3 | 0.0236 | 289.05 |
| Gauge | LB/Sq In. | LB/Sq. Ft. | Gauge Tolerance | ||
|---|---|---|---|---|---|
| 96″ Wide | 72″ Wide | ||||
| 3/8 | 0.03750 | 0.011456 | 16.0496 | +.0060″ -.0010″ | +.0055″ -.0010″ |
| 7/16 | 0.04375 | 0.013250 | 19.0080 | ||
| 1/2 | 0.05000 | 0.015044 | 21.0633 | ||
| 9/16 | 0.05625 | 0.016838 | 24.0247 | ||
| 5/8 | 0.06250 | 0.018633 | 26.0831 | ||
| 11/16 | 0.06875 | 0.020427 | 29.0415 | ||
| 3/16 | 0.01875 | 0.005958 | 8.0579 | +.0050″ -.0010″ | +.0045″ -.0010″ |
| 7/32 | 0.02187 | 0.006854 | 9.0870 | ||
| 1/4 | 0.02500 | 0.007750 | 11.0162 | ||
| 5/16 | 0.03125 | 0.009546 | 13.0746 | ||
| 1 | 1.00000 | 0.029628 | 42.0665 | +.0075 -.0010″ | +.0070″ -.0010″ |
| 1-1/8 | 1.01250 | 0.033217 | 47.0833 | ||
| 1-1/4 | 1.02500 | 0.036806 | 53.0001 | ||
| 1-3/8 | 1.03750 | 0.040395 | 58.0169 | ||
| 1-1/2 | 1.05000 | 0.043984 | 63.0337 | ||
| 1-3/4 | 1.07500 | 0.051161 | 73.0672 | ||
| 3/4 | 0.07500 | 0.022308 | 32.0123 | +.0065″ -.0010″ | +.0060″ -.0010″ |
| 13/16 | 0.08125 | 0.024102 | 34.0707 | ||
| 7/8 | 0.08750 | 0.025897 | 37.0291 | ||
| 15/16 | 0.09375 | 0.027691 | 39.0875 | ||
| 3 | 3.00000 | 0.087709 | 126.0301 | +.0160″ -.0010″ | |
| 3-1/2 | 3.05000 | 1.002064 | 146.0972 | ||
| 2 | 2.00000 | 0.058339 | 84.0008 | +.0150″ -.0010″ | +.0125″ -.0010″ |
| 2-1/8 | 2.01250 | 0.062229 | 89.0610 | ||
| 2-1/4 | 2.02500 | 0.065817 | 94.0777 | ||
| 2-1/2 | 2.05000 | 0.072995 | 105.0113 | ||
| 2-3/4 | 2.07500 | 0.080173 | 115.0449 | ||
| 4 | 4.00000 | 1.016850 | 168.0264 | +.0200″ -.0010 | |
| Specified Thickness (t), in. (mm) | Flatness Tolerance for Thicknesses Given, in. (mm) |
|---|---|
| 1/4 <= t < 3/8 (9.052) | 3/8 (9.05) |
| t < 1/4 (6.035) | 7/16 (11) |
| t >=4 (101.060) | 1/4 (6.04) |
| 1/2 (12.070) <= t < 3/4 (19.005) | 5/16 (7.09) |
| 3/8 (9.052) <= t < 1/2 (12.070) | 5/16 (7.09) |
| 1 (25.040) <= t < 1-1/2 (38.010) | 1/4 (6.04) |
| 3/4 (19.005) <= t < 1 (25.040) | 5/16 (7.09) |
| 1 1/2 (38.010) < = t < 4 (101.060) | 1/4 (6.04) |
| Specified Thickness in. | Permitted Variations, in. Over and Under, Except as Indicated Otherwise for Specified Width (w) in. | |
|---|---|---|
| Width >60 | Width <=60 | |
| >0.01875 to 0.0250 | -0.0010; +0.0020 | -0.0010; +0.0020 |
| >0.0250 to 0.03125 | -0.0010; +0.0022 | -0.0010; +0.0022 |
| >0.03125 | -0.0010; +0.0030 | -0.0010; +0.0030 |
| Hole Centres (in mm) | Tck mm | Hole Dia (in mm) | Finish | O/A | Full Sheet Size mm |
|---|---|---|---|---|---|
| 1.05 | 0.06 | 0.075 | 2B | 23% | 2000 x 1000 |
| 2 | 1.00 | 1 | 2B | 23% | 2000 x 1000 |
| 2.06 | 1.00 | 1.05 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 5 | 1.00 | 3 | 2B | 33% | 2000 x 1000 |
| 5.06 | 1.00 | 4 | 2B | 46% | 2000 x 1000 |
| 8 | 1.00 | 5 | 2B | 35% | 2000 x 1000 |
| 8 | 1.00 | 6 | 2B | 51% | 2000 x 1000 |
| 10 | 1,0 | 8 | 2B | 58% | 2000 x 1000 |
| PRODUCT | THICKNESS MM | FINISH | MAX SHEET SIZE MM |
|---|---|---|---|
| Grade | 0.08, 1.02 | Rimex Super Mirror | 2400 x 1200, 2500 x 1250 |
| 0.09 | Bright | 2000 x 1000 | |
| 0.09 | Plain 2B | 2000 x 1000 | |
| 0.09, 1.02 | Brushed Finish | 2000 x 1000, 2500 x 1250 | |
| 0.08, 1.00 | Embossed | 2500 x 1250 |
| HS Code | Description |
|---|---|
| 74091900 | COPPER FLATS/SHEETS/STRIPS- COPPER STRIPS |
| 74091900 | Cu FLATS/SHEETS/STRIPS- COPPER FLATS |
| 74091100 | ETP Cu FLATS/SHEETS/STRIPS-COPPER FLAT-25 X 3MM |
| 74091100 | ETP COPPER FLATS/SHEETS/STRIPS-COPPER FLAT-50 X 6 MM (TIN PLATED) |
| 74091100 | ETP Cu FLATS/SHEETS/STRIPS-COPPER FLAT- 16 X 1200MM |
| 74091100 | ETP COPPER FLATS/SHEETS/STRIPS-COPPER FLAT-20MM X 1200 MM |
| 74091100 | ETP Cu FLATS/SHEETS/STRIPS-COPPER TAPE 80 X 5 MM |
| Specific Gravity | 8.89 - 8.94 |
| Density | 0.322lb./cu. in. at 68°F |
| Thermal Conductivity | 226 BTU/Sq Ft/Ft/Hr °F at 68°F |
| Coefficient of Thermal Expansion | 0.0000098/°F from 68°F to 572°F |
| Modulus of Elasticity (Tension) | 17,000,000 psi |
| Tensile Strength | 32,000 psi min. |
| Yield Strength (0.5% Extension) | 20,000 psi min. |
| Elongation in 2" - approx. | 30% |
| Shear Strength | 25,000 psi |
| Hardness - , Rockwell (F Scale) , Rockwell (T Scale) | 54 min. , 15 min. |
| Temper Designation Standard | Tensile Strength (Ksi) | Yield Strength (Ksi) Min. | |
|---|---|---|---|
| Min. | Max. | ||
| 060 Soft | 30 | 38 | -- |
| H00 Cold-Rolled 1/8 Hard | 32 | 40 | 20 |
| H01 Cold-Rolled, high yield 1/4 Hard | 34 | 42 | 28 |
| H02 Half Hard | 37 | 46 | 30 |
| H03 Three quarter Hard | 41 | 50 | 32 |
| H04 Hard | 43 | 52 | 35 |
| Belgium, Philippines, Dammam -KSA, Indonesia | Copper Alloy Plate |
| Thailand, Europe, Qatar, France | Cu Pure Copper Plate Sheet |
| Malaysia, Thailand, Czechia, Germany | Fr-4 Cem-1 Copper Clad Laminated Sheet |
| Finland, Bangladesh, Malaysia, USA | C11000 C10100 C10200 C1100 Copper Sheet and Copper Plate |
| Brazil, Kuwait, South Africa, Saudi Arabia (KSA) | Copper Plated Sheets for Interior Decoration |
| Singapore, Bahrain, South Africa | 99.9% Copper Sheet (C11000 C10100 C10200 C1100 Tu1 T2) |
| Nigeria, UK, Philippines, Australia | Copper Composite Sheet Ccp Brushed for Historical Building |
| UAE, Hong Kong, Oman, Malaysia | 3mm 4mm Thickness 4X8 Cu Sheet |
| Singapore, Iran, Chile, Italy | Copper Material 0.5mm to 26mm Thick Copper Sheet |
| Malaysia, Norway, United Arab Emirates (UAE), Turkey | Copper Cathodes 99.99% Copper Alloy Plate/Sheet for Roofing |
| Dubai, Russia, Netherlands, Malaysia | Tx-002 Copper Sheet, Copper Plate Tx-002 |
| UK, Mexico, Egypt, Spain | Pure Copper Cathode / Pure Copper Sheet |
| UAE, Malaysia, United Kingdom -UK, Europe | 12inx24 in Copper Sheet for Boat |
| Ellington -United States, Poland, UK, Canada | 0.01mm Cu Plate |
| Singapore, Canada, Philippines, Malaysia | Hairline Etching Copper Stainless Steel Sheet |
| Malaysia, Romania, Europe, Japan | Copper Sheet Plate Coil 1mm - 20mm |
| Colombia, China, Sweden | Cu Acrylic Mirror Sheet for Interior Decorate |