Copper Nickel 90/10 Plate

ASTM B122 UNS C70600 Sheet & Strip manufacturers in India.


Copper-Nickel, famously known as Cupronickel is an alloy that contains 60-90 % of copper. The metal bars made out of Copper-Nickel with different amounts of copper act differently. Copper Nickel 90/10 Plate consists of 90 % copper and 10% nickel. This makes the product highly ductile, tough, and thermal stable at high temperatures. Thus suitable for marine, industrial and architectural applications. UNS C70600 Sheet has a density of 8.94 g/cm3 and it also has high resistance to biofouling. The tensile strength in the ranges of 303-414 MPa and yield strength of 110 to 393 MPa. It supports only 20% machinability due to its high strength. Copper Nickel UNS C70600 Hot Rolled Plate has a maximum hardness of 42 HRB and elastic modulus of 140 Gpa. The thermal conductivity is low at 26 W/m.K, thus it causes heat while machining. The 90/10 Cu-Ni Cold Rolled Sheet requires annealing after cold forming.

However, it should be within the range of 593 to 816 Celsius to avoid any stress fracture. This makes it useful in forged valve and pump parts and in chloride solutions. The ASTM B122 Copper Nickel 90/10 Perforated Sheet has a thermal conductivity of 45 W/m-K at room temperature and a melting point of 1099 to 1149 Celsius. It has a minimum yield strength of 105 MPa in the annealed condition when treated at the H55 heat condition.

The UNS equivalent Werkstoff No 2.0872 Chequered Plate has a thickness of 10 to 150 mm and proof stress of 140 - 190 N/mm2 and tensile strength of 340-360 N/mm2. It shows excellent resistance to pitting corrosion and thus useful in piping applications. The 90/10 Copper Nickel Shim Sheet supports hot working in the temperature range of 800 to 900 Celsius. It might require a stress relief treatment after cold work and thus the temperature of 350 Celsius is enough.


Cu-Ni 90/10 Cold Rolled Sheet

UNS C70600 Coil

Werkstoff No 2.0872 Foil

Copper Nickel 90/10 Plate
Copper Nickel 90/10 Plate
Copper Nickel 90/10 Sheet
Copper Nickel 90/10 Sheet

ASME SB 122 Cupro Nickel 90/10 foil can be easily fabricated and welded. It becomes paramagnetic at temperatures of 150-200 Celsius. The elongation at room temperature is between 27 to 30%. It is thus used in offshore and marine. Copper Nickel 90/10 Sheet has excellent resistance to corrosion in seawater and can be easily machined. Welding can be done on the coil using a spot, gas-shielded arc. Cupro Nickel 90/10 strip has a shear modulus of 52 GPa and elastic modulus of 140 GPa.

copper nickel 90 10 plate supplier in india

90/10 cu-ni cold rolled sheet


Don't spend extra for size of Cu-Ni 90/10 Coil, we supply custom sizes ASME SB 122 Cupro Nickel 90/10 foil.


90/10 Cuni Plate Sizes Chart

STOCKED SIZES
Size Range Copper Nickel 90/10 Plate And Sheet Size Of Plate & Sheet
.125" Perforated Plate And Sheet 3.18mm
.134" Coil And Strips 3.40mm
156" Perforated Plate And Sheet 3.96mm
187" Sheet & Rolling Plate 4.75mm
250" Rolling Sheets 6.35mm
312" Perforated Plate And Sheet 7.92mm
375" Rolling Plate And Sheet 9.53mm
.500" Sheet And Clad Plate 12.7mm
.625" Flat Shim And Sheet 15.9mm
.750" Sheet And Strips 19.1mm
.875" Rolling Sheets 22.2mm
1" Plate/ Flat Shim/ Sheet 25.4mm
2" Plate And Clad Plate & Sheet 50.8mm
3" Plate And Rolling Sheets 76.2mm

Werkstoff No 2.0872 Chequered Plate Dimensions Chart

Dimensions Of Metric

finish Surface

Thickness (millimeter)

Width (millimeter)

2B – Cold rolled, heat treated, pickled, skin passed

0.25–8.0

maximum 2032

2D – Cold rolled, heat treated, pickled

0.4–6.35

maximum 1524

2E – Cold rolled, heat treated, mechanically descaled

0.4–8.0

maximum 2032

2R – Cold rolled, bright annealed

0.25–3.5

maximum 1524

2H – Work hardened

0.4–6.35

maximum 1524

Polished, brushed

0.5–4.0

maximum 1524


Cu Ni 90/10 Plate And Sheet Specification Checklist

Specification Copper Nickel 90/10 Plate And Sheet
Most Selling Type Of Rolling Sheet/ Rolling Plate/ Flat Shim/ Flat Sheet/ Shim Sheet/ descaled/ tread plate/ Checker Plate, Plate/ Sheet/ Coils/ Foils/ Strip/ Flats/ Clad Plate/ Plain Sheet/ Rolls/ Blank (Circle)/ sheared/ annealed/ soft annealed
Standard Dimensions Of Copper Nickel Sheet EN ISO 18286/ ASME IID/ ASTM A 959/ ASTM A 480
Plate Width 36 to 60 Inches
Thickness 0.063 to 0.375 Inches
Plate Length Up to 240 Inches
Chemical Composition UNS C70600 Sheet : Copper (69.5%)/ Nickel (30.0%)/ Iron (0.5%)
Mechanical Properties Of Tensile 40000 psi
Form Blank (Circle)/ Ring (Flange)/ Plain Sheet/ Strip/ Flats/ Coils/ Foils/ Rolls
UNS Number Of Copper Nickel 70/30 Plate UNS C70600
Check Availability Of Cupro Nickel 90/10 Sheet / Plate / Coil Below Locations Abu-Dhabi, Surabaya, Oyama, Al-Jubail, Nagpur, Johor-Bahru, Mumbai, Shanghai, Hangzhou, Madrid, Delhi, Quezon-City, Milan, Thane, Bangkok, Ahmedabad, Batam, Dhaka, Lagos, Jamshedpur, Gurgaon, Cairo, Riyadh, Puchong, Bogota, Dallas, Rajkot, Hanoi, Visakhapatnam, Singapore, New-Delhi, Sydney, Ghaziabad, Sharjah, Indore, Baku, Tehran, Dubai, Chandigarh, Bengaluru, Bhubaneswar, Chicago, Amsterdam, Agra, Kalyan, Alexandria, London, Mexico-City, Beijing, Ashburn, Mysuru, Paris, Brisbane, Raipur, Hyderabad, Zhengzhou, Pimpri-Chinchwad, Kota, Ludhiana, Vasai-Virar, Jeddah, Jaipur, Kolkata, Kochi, Shah-Alam, Chennai, Hazira, Secunderabad, Bhopal, Jamnagar, Kuala-Lumpur, Ambernath, Surat, Noida, Coimbatore, Ankleshwar, Vapi, Houston, Al-Khobar, Doha, Dombivli, Manama, Faridabad, Seoul, Patna, Pune, Ho-Chi-Minh-City, Nashik, Busan, Sao-Paulo, Istanbul, Santiago, Ajman, Panipat, Lucknow, Vung-Tau, Calgary, Jakarta, Navi-Mumbai, Guwahati, Melbourne, Karachi, Dammam, Perth, Tiruchirappalli, Vadodara,

Check standard specification & price list of 90/10 Copper Nickel Shim Sheet and Perforated Sheet Ex Mumbai.


ASTM B171 Cu-Ni 90/10 Plates Price List In India

Thickness Of Copper Nickel Plate Width Of Cu Ni Plate Length Of C70600 Copper Nicke Plate Price In India (INR)
10ga 1" 10" 111.36 To 4817.00
16ga 1" 10" 240.36 To 5210.00
20ga 1" 10" 300.36 To 5576.00

Well-known Manufacturer Of Copper Nickel 90/10 Plate in India. For final Copper Nickel 90/10 Sheet Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.


Cu-Ni 90/10 Coil Chemical Compatibility

Grade Cu Mn Pb Ni Fe Zn
Copper Nickel 90/10 Plate 88.6 minimum 1.0 maximum 0.05 maximum 9-11 maximum 1.8 maximum 1 maximum

90/10 Cupro Nickel Plate Equivalent

STANDARD UNS WERKSTOFF NR.
Copper Nickel 90/10 Plate C70600 2.0872
Keep Werkstoff No 2.0872 Chequered Plate stock with 2B/ BA/ HL/ NO.1 finish at factory price.

UNS C70600 Coil Mechanical Strength

Grade Cu Mn Pb Ni Fe Zn
Copper Nickel 90/10 Plate 88.6 minimum 1.0 maximum 0.05 maximum 9-11 maximum 1.8 maximum 1 maximum

buy Custom Cut Lengths of 90/10 Cu-Ni Hot rolled and Cold Rolled Plate with Mill Test Certificate.

Cupro Nickel 90/10 Sheet Weight

Thickness In Inches Plate Weight (Unit Area) Density
3/16" 0.06000 lbs/in²42.184176 kilogram/m² 0.315 lbs/in³8.72 g/cm³
1/4" 0.08 lbs/in²56.245568 kilogram/m² 0.315 lbs/in³8.72 g/cm³
3/8" 0.121 lbs/in²85.0714216 kilogram/m² 0.315 lbs/in³8.72 g/cm³
1/2" 0.161 lbs/in²113.1942056 kilogram/m² 0.315 lbs/in³8.72 g/cm³
5/8" 0.196 lbs/in²137.8016416 kilogram/m² 0.315 lbs/in³8.72 g/cm³
3/4" 0.235 lbs/in²165.221356 kilogram/m² 0.315 lbs/in³8.72 g/cm³
7/8" 0.274 lbs/in²192.6410704 kilogram/m² 0.315 lbs/in³8.72 g/cm³
1" 0.313 lbs/in²220.0607848 kilogram/m² 0.315 lbs/in³8.72 g/cm³

Visit Our Copper Nickel 90/10 Plate And Sheet Mill In Mumbai, India

Cupro Nickel 90/10 Sheets

Cupro Nickel 90/10 Sheets

ASTM B171 Cu-Ni 90/10 Plates

ASTM B171 Cu-Ni 90/10 Plates

Cupro Nickel 90/10 Shim Sheets

Cupro Nickel 90/10 Shim Sheets

Cupro Nickel UNS C70600 Coil

Cupro Nickel UNS C70600 Coil

90/10 Cupro Nickel Chequered Plate

90/10 Cupro Nickel Chequered Plate

Cupro Nickel DIN 2.0872 Perforated Sheets

Cupro Nickel DIN 2.0872 Perforated Sheets

Cupro Nickel 90/10 Cold Rolled Sheets

Cupro Nickel 90/10 Cold Rolled Sheets

90/10 Cu-Ni Hot Rolled Plates

90/10 Cu-Ni Hot Rolled Plates


Some Of The Countries We Have Supplied Various Types Of Copper Nickel 90/10 Plate And Sheet Recently:

Copper Nickel Plate 90/10 Norway, Turkey, United Arab Emirates (UAE), Malaysia
ASTM B122 UNS C70600 Sheet Malaysia, Europe, United Kingdom -UK, UAE
Copper Nickel 90/10 Strip & Plate Ellington -United States, Poland, UK, Canada
UNS C70600 Sheet And Plate Malaysia, Philippines, Canada, Singapore
90/10 Cu-Ni Cold Rolled Sheet Romania, Europe, Japan, Malaysia
Copper Nickel UNS C70600 Hot Rolled Plate Belgium, Philippines, Dammam -KSA, Indonesia.
Copper Nickel Sheet Thailand, Europe, Qatar, France.
ASTM B122 Copper Nickel 90/10 Perforated Sheet Singapore, South Africa, Bahrain
Werkstoff No 2.0872 Chequered Plate UK, Australia, Philippines, Nigeria
90/10 Copper Nickel Shim Sheet UAE, Hong Kong, Oman, Malaysia
ASME SB 122 Cupro Nickel 90/10 Foil Iran, Chile, Singapore, Italy
Cu-ni 90/10 Coil Or Plate Thailand, Germany, Malaysia, Czechia
C70600 Copper Nickel "90/10" Plate Bangladesh, Malaysia, Finland, USA
Cupro Nickel 90/10 Sheet / Plate / Coil Kuwait, South Africa, Saudi Arabia (KSA), Brazil
90/10 Copper Nickel Plate Russia, Malaysia, Netherlands, Dubai
Cuni 90/10 Sheet & Plate UK, Mexico, Egypt, Spain