Copper Nickel 70/30 Plate
ASTM B122 UNS C71500 Sheet and Coil Manufacturer in india as per International Standard
Cupronickel is an alloy of copper and nickel. It consists of about 70 percent of copper and 30 percent of nickel. Cupronickel was used for the first time in 1900.
Cupronickel material version is specially made for salt water residential pool applications, however copper is used for the standard heat exchange material for the well balanced pool and spa water. A thicker copper is used for the salt-water pools exchange. Cu-ni 70/30 sheets are used in condensers, various seawater piping as well as power plants and a lot of times in exchanger shells. Cupronickel 70/30 coils are used in welding backing rings.
The different thicknesses of these products:
- Cupro-nickel 70/30 plates have a thickness greater than 6.35 mm and thus with this thickness is also similar to 70/30 Cu-ni Chequered plates.
- Cu-ni 70/30 sheets have thickness greater than 0.15mm and less than 6.35 mm and thus are called as Cu-ni 70/30 sheets.
- Cupro-nickel 70/30 coils have a thickness of about less than 0.15 mm and thus are called as Cupro-nickel 70/30 coils.
Where are these products used?
These products are used in pharmaceutical Equipment, many chemical equipment, heat equipment, condensers, many power generation power plants, Gas processing, and speciality chemicals. Werkstoff No. 2.0882 perforated sheet are used in the chemical equipment.
Cu-ni 70/30 coils are widely used in many places and are of great use and they come in a wide variety. Technology has a great use of these products. UNS C71500 strip are used for marine applications due to their outstanding seawater corrosion. Copper Nickel 70/30 Hot rolled plates are used in petrochemicals. ASME SB 122 cupro nickel 70/30 foil has a wide range of usage in speciality chemicals. ASTM B122 Copper nickel 70/3 shim sheet is used in many heating equipments.
Cu-Ni 70/30 Hot Rolled Plate
Cu-Ni 70/30 Coil
UNS C71500 Sheet And Plate
Copper Nickel 70/30 Plate
Copper Nickel 70/30 Sheet
Supplier of ASME SB 122 Cupro Nickel 70/30 Perforated Sheet and strips in Mumbai, see mechanical properties
Table of Content
- Copper Nickel 70/30 Plate Material Specification
- CuNi 70/30 - Copper Nickel 70/30 Plate & Sheet Price List In Inches
- Cupro Nickel 70/30 Coil Chemical Composition
- Cu-Ni 70/30 Shim Sheets Mechanical Properties
- Cupro Nickel 70/30 Sheet And Plate & Coil Equivalent Material
- Standard Dimensions Of UNS C71500 Hot Rolled Plate
- Werkstoff Nr. 2.0882 Sheet And Plate Sizes Chart
- C71500 (70/30) Copper Nickel Plate Weight And Density Table
- Largest Independent Manufacturer Of Copper Nickel 70/30 Plate For Sale
| Specification | Copper Nickel 70/30 Plate |
|---|---|
| Standard Dimensions Of | EN ISO 18286/ ASME IID/ ASTM A 959/ ASTM A 480 |
| UNS Number Of Copper Nickel 70/30 Plate | UNS C71500 |
| Chemical Composition | UNS C71500 Sheet : Copper (69.5%)/ Nickel (30.0%)/ Iron (0.5%) |
| Mechanical Properties Of Tensile | 40000 psi |
| Plate Width | 36 to 60 Inches |
| Thickness | 0.063 to 0.375 Inches |
| Plate Length | Up to 240 Inches |
| Form | Blank (Circle)/ Ring (Flange)/ Plain Sheet/ Strip/ Flats/ Coils/ Foils/ Rolls |
| Most Selling Type Of | Rolling Sheet/ Rolling Plate/ Flat Shim/ Flat Sheet/ Shim Sheet/ descaled/ tread plate/ Checker Plate, Plate/ Sheet/ Coils/ Foils/ Strip/ Flats/ Clad Plate/ Plain Sheet/ Rolls/ Blank (Circle)/ sheared/ annealed/ soft annealed |
| Check The Market Price Before You Buy Below Locations | Zhengzhou, Patna, Beijing, Surabaya, Navi-Mumbai, Indore, Noida, Panipat, Perth, Calgary, Milan, Santiago, Thane, Hyderabad, Ghaziabad, Ankleshwar, Faridabad, Kota, Visakhapatnam, Hangzhou, Tiruchirappalli, Kochi, Nagpur, Jeddah, Kolkata, Surat, Puchong, Ajman, Ambernath, Kalyan, Quezon-City, Busan, Dubai, Mysuru, Vapi, Brisbane, Dammam, Amsterdam, Al-Jubail, Nashik, Bhopal, Jaipur, Sao-Paulo, Kuala-Lumpur, Vasai-Virar, Manama, Seoul, Lucknow, Riyadh, Agra, Dallas, Ahmedabad, Pimpri-Chinchwad, Bogota, Dombivli, Paris, London, Jamnagar, Guwahati, Coimbatore, Secunderabad, Sharjah, Delhi, Tehran, Doha, Raipur, Ludhiana, Bengaluru, Johor-Bahru, Singapore, Rajkot, Bhubaneswar, Vung-Tau, Chicago, Karachi, Lagos, Istanbul, Hazira, Hanoi, Cairo, Mexico-City, Al-Khobar, Sydney, Dhaka, Mumbai, Shanghai, Gurgaon, Ho-Chi-Minh-City, Houston, Shah-Alam, Melbourne, Jakarta, Madrid, Abu-Dhabi, Oyama, Batam, New-Delhi, Bangkok, Vadodara, Chandigarh, Jamshedpur, Chennai, Ashburn, Alexandria, Baku, Pune, |
Call for small piece of Cu-ni 70/30 Chequered Plate and foil to test before buying
| Thickness Of Plate And Sheet | Width | Length | Price In INR (Per KG) |
|---|---|---|---|
| 10Ga | 1" | 8" | 109.62–47356.55 |
| 16Ga | 1" | 10" | 182.70–47356.55 |
| 20Ga | 1" | 12" | 255.78–47356.55 |
| 22Ga | 1" | 14" | 328.86–47356.55 |
| 24Ga | 1" | 16" | 401.95–47356.55 |
| Grade | Ni | Fe | Zn | Cu | Mn | Pb |
| Copper Nickel 70/30 Plate | 29-33 maximum | 0.4-1.0 maximum | 1 maximum | 65 minimum | 1.0 maximum | 0.05 maximum |
View latest price & ready sizes of Werkstoff No 2.0882 Hot Rolled Plate and Shim Sheet Ex Mumbai
| Density | Yield Strength (0.2%Offset) | Elongation | Melting Point | Tensile Strength |
| 0.323 lb/in3 at 68 F | 20000 psi | 30 % | 2260 F | 50000 psi |
| STANDARD | WERKSTOFF NR. | UNS |
| Copper Nickel 70/30 Plate | 2.0882 | C71500 |
buy Cupro Nickel 70/30 Clad and Mesh Plate, check hardness, equivalent and chemical composition here
|
Dimensions Of Metric |
||
|---|---|---|
|
finish Surface |
Thickness (millimeter) |
Width (millimeter) |
|
2B – Cold rolled, heat treated, pickled, skin passed |
0.25–8.0 |
maximum 2032 |
|
2D – Cold rolled, heat treated, pickled |
0.4–6.35 |
maximum 1524 |
|
2E – Cold rolled, heat treated, mechanically descaled |
0.4–8.0 |
maximum 2032 |
|
2R – Cold rolled, bright annealed |
0.25–3.5 |
maximum 1524 |
|
2H – Work hardened |
0.4–6.35 |
maximum 1524 |
|
Polished, brushed |
0.5–4.0 |
maximum 1524 |
| STOCKED SIZES | ||
|---|---|---|
| Size Range | Cuni 70/30 Sheet And Plate | Size Of Plate & Sheet |
| .125" | Perforated Plate And Sheet | 3.18mm |
| .134" | Coil And Strips | 3.40mm |
| 156" | Perforated Plate And Sheet | 3.96mm |
| 187" | Sheet & Rolling Plate | 4.75mm |
| 250" | Rolling Sheets | 6.35mm |
| 312" | Perforated Plate And Sheet | 7.92mm |
| 375" | Rolling Plate And Sheet | 9.53mm |
| .500" | Sheet And Clad Plate | 12.7mm |
| .625" | Flat Shim And Sheet | 15.9mm |
| .750" | Sheet And Strips | 19.1mm |
| .875" | Rolling Sheets | 22.2mm |
| 1" | Plate/ Flat Shim/ Sheet | 25.4mm |
| 2" | Plate And Clad Plate & Sheet | 50.8mm |
| 3" | Plate And Rolling Sheets | 76.2mm |
| Thickness In Inches | Plate Weight (Unit Area) | Density |
|---|---|---|
| 3/16" | 0.06000 lbs/in²42.184176 kilogram/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4" | 0.08 lbs/in²56.245568 kilogram/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8" | 0.121 lbs/in²85.0714216 kilogram/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2" | 0.161 lbs/in²113.1942056 kilogram/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8" | 0.196 lbs/in²137.8016416 kilogram/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4" | 0.235 lbs/in²165.221356 kilogram/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8" | 0.274 lbs/in²192.6410704 kilogram/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1" | 0.313 lbs/in²220.0607848 kilogram/m² | 0.315 lbs/in³8.72 g/cm³ |
70/30 Cupro Nickel Chequered Plate
Werkstoff Nr. 2.0882 Perforated Sheets
Cupro Nickel 70/30 Cold Rolled Sheets
70/30 Cu-Ni Hot Rolled Plate
Cupro Nickel 70/30 Sheets
ASTM B171 Cu-Ni 70/30 Plates
Cupro Nickel 70/30 Shim Sheets
Cupro Nickel UNS C71500 Coil
Locations We Have Supplied Recently
| Sheet and Plate C71500 70/30 | South Africa, Bahrain, Singapore |
| Copper Nickel 70/30 Plates | Europe, Qatar, Thailand, France |
| Copper Nickel 70/30 Sheet | Nigeria, UK, Australia, Philippines |
| Cupro Nickel 70/30 Sheet / Plate / Coil | Malaysia, UAE, Hong Kong, Oman |
| UNS C71500 Plate | Finland, Bangladesh, Malaysia, USA |
| Cu-Ni UNS C71500 Plate | Iran, Singapore, Chile, Italy |
| Cupro Nickel DIN 2.0882 Sheets | United Arab Emirates (UAE), Norway, Malaysia, Turkey |
| Copper Nickel 70/30 Plate | Dammam -KSA, Philippines, Indonesia, Belgium |
| Cu-Ni 70/30 Plates | Canada, Singapore, Malaysia, Philippines |
| Cupro Nickel UNS C71500 Sheets | Egypt, Spain, UK, Mexico |
| Cu-Ni 70/30 Coil | Ellington -United States, UK, Poland, Canada |
| 70/30 Cu-Ni Hot Rolled Plate | United Kingdom -UK, Malaysia, Europe, UAE |
| Cupro Nickel 70/30 Perforated Sheet | Europe, Romania, Malaysia, Japan |
| Cu-Ni 70/30 Hot Rolled Plate | Germany, Thailand, Czechia, Malaysia |
| Cu-Ni 70/30 Cold Rolled Sheet | Colombia, Malaysia, Sweden, China |