Copper Bolts

CDA 101 Machine Screws and Carriage Bolts Manufacturer in india, view Copper Nuts And Bolts Price

copper bolts

 

Copper fastener is of 2 basic types, rigid copper and soft copper. Such types of fasteners are made from copper are mostly used to supply cold or hot tap water and it also finds use in HVAC systems, as a refrigerant line. Coper Hex Head Bolt is used for pressure application, as well as for the supply of commercial water and residential water. Type K is used for streets and sidewalks. Type DWV is suitable for use in only unpressurized applications such as waste, drain and vent (DWV) lines. Type M is used in applications where there calls for low pressure heating, such as those in commercial, as well as residential applications.

In Australia, Copper tube is classified as Type C, Type A, Type D and Type B. In Europe, fasteners made from Copper are classified as Type Z, Type Y and Type X. Today, all across the globe, the amount of Copper and its alloys consumed, is in excess of 18 million tonnes per year. Copper Nut is yellowish red, but when it is polished, it gets a kind of bright metallic luster. 1083 ºC, is the melting point of Copper which is pure. Tubes made from soft (ductile) copper are used in heat pumps and in refrigerant lines for split ACs. For water lines, rigid copper screw is used. As tubes made from Copper are long lasting, they are a favorite for use in various kinds of systems like cooling, heating, plumbing and others.

 

Are you searching Copper Bolts Manufacturer in India ?

  • We always welcome our clients to visit our stockyard in Mumbai offline or online some time recently putting the purchase order to guarantee the accessibility of material.
  • If you don't mind check our cost List of Copper Nuts and Bolts in stock, You may discover 5% to 10% less cost and greatest sizes in our warehouse.
  • At Siddhagiri we are pleased to say that we have 90% repeat clients of copper hex bolts from Indonesia, Malaysia, UAE, Singapore, Thailand, Philippines, Vietnam KSA, Qatar, South Africa, Argentina, Italy, West Africa, Oman, USA and Europe.

 

SIDDHAGIRI is a well-known Copper Fasteners Suppliers in India & offer rigid copper and soft copper fasteners. Such types of fasteners are made from copper are mostly used to supply cold or hot tap water and it also finds use in HVAC systems, as a refrigerant line. Copper Hex Head Bolt is used for pressure application, as well as for the supply of commercial water and residential water.

Copper tube comes in various types such as Type C, Type A, Type D and Type B whereas In Europe, fasteners made from Copper are classified as Type Z, Type Y and Type X. Copper bolts are yellowish red, but when it is polished, it gets a kind of bright metallic luster. 1083 C, is the melting point of Copper which is pure. Tubes made from soft (ductile) copper are used in heat pumps and in refrigerant lines for split ACs. For water lines, rigid copper screw is used.

Copper fasteners bolts sizes come in M 02 to M 160, length 3mm to 200 mm and standards include DIN, ISO, JIS, GB, IS, BS, ASTM ANSI – American National Standards Institute ANSI B 18.2.4 2M, ANSI B 28.2.4 1M, Copper Stud Bolt length are defined in ASME B16.5 standard, Copper Hex nuts are defined in ASME B18.2.2, ASME B18.5. DIN 931, DIN 933, DIN 934, DIN 970, ISO (International Organization for Standardization), ISO 4032, ISO 4033. Available in nuts, bolts, screws and washers made of copper.

 

Copper Nuts And Bolts
Copper Nuts And Bolts
Copper Fasteners
Copper Fasteners
Copper Machine Screws
Copper Machine Screws

 

copper bolts

 

Copper Bolts Specifications

Size M 02 to M 33
Length 3 mm to 200 mm
Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard: DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Stud Bolt length are defined in ASME B16.5 standard
  • Hex nuts are defined in ASME B18.2.2
  • ASME B18.5
  • BS en iso 3506

DIN: DIN 931, DIN 933, DIN 934, DIN 970

UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF

ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards

SCOPE OF MANUFACTURE
  • Up to M36 / 1-1/2” Dia, up to 1100mm lg
  • CNC Machined Fasteners, up to M100 / 4” Dia, up to 1500mm lg
Dia M6 to M64 (1/4" - 2.5")
Length 12 MM - 500 MM (Upto 20 Inch)
IS 1363, 1364
DIN 931, 933
ISO ISO 3506
Form of: Hex, Square, Round, Threading as per Gauge Etc.
Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Finishing: Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET
Production process M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element
Origin and service-region: European, Origin of Western European. However projects with eastern origin are possible on request.
Top Manufacturers SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fasteners Etc.
Types Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts

 

Looking for Pure Copper Hex Bolts manufacturers? your searched end here, get Copper Bolts Nuts Washers online in all metric sizes M4/ M5/ M6/ M10

 

Most Selling types of Copper Fasteners

Copper Stud Bolt
Copper Stud Bolt
Copper Threaded Rod
Copper Threaded Rod
Copper Hex Bolts
Copper Hex Bolts
Copper Bolts Nuts Washers
Copper Bolts Nuts Washers

 

Copper Nuts And Bolts Price

Description Price
3/8 copper bolts price per piece US $0.20-$2.00 / Piece
Solid Copper bolt price per piece US $0.50-$2.00 / Piece
Copper stud bolt c/w 2 heavy hex nut US $15.60-$19.00 / Pieces
Solid copper screws Price US $14.80-$15.60 / Pieces
Pure Copper bolts Price US $0.01-$0.50 / Piece
Copper plated bolts Price US $0.10-$100.00 / Piece
14-20 Copper bolt price per piece US $0.50-$2.00 / Piece
High quality Copper price stud bolts with hex nut US $0.01-$2.00 / Piece
Copper cotter pin bolt Price US $0.10-$5.00 / Piece
Cheap Copper hex bolt and nut Price US $0.04-$0.60 / Piece
High quality M8 Copper bolt price per piece US $0.50-$2.00 / Piece
Copper 12 Point Flange Bolt Price US $3.20-$3.60 / Pieces
Best price Iso 4017 Copper Hex Bolt And Nut US $0.05-$1.00 / Piece
Copper DIN/EN 12 point bolt flange shoulder bolt U bolt eye bolt Price US $10.50-$12.00 / Pieces
Copper hex bolts Price US $0.20-$0.50 / Pieces

 

Copper Fasteners Suppliers, Check size chart & dimensions of Copper Eye Bolt, Cu Stud Bolts and threaded rod ex Mumbai in almost all sizes

 

Copper Hex Bolts Sizes

D1D1 K E S
M3 2 6.01 5.5
M4 2.8 7.66 7
M5 3.5 8.79 8
M6 4 11.05 10
M8 5.3 14.38 13
M10 6.4 18.9 17
M12 7.5 21.1 19
M14 8.8 24.49 22
M16 10 26.75 24
M18 11.5 30.14 27
M20 12.5 33.53 30
M22 14 35.72 32
M24 15 39.98 36
M27 17 45.2 41
M30 18.7 50.85 46
M33 21 55.37 50
M36 22.5 60.79 55
M42 26 71.3 65
M48 30 82.6 75

 

Size Range of CDA 101 Copper Stud

Size Range of CDA 101 Copper Stud
Diameter Of Stud Bolts Copper Studs Bolts
Plain
UNC8UN
1/2 Inch19568-
5/8 Inch19569-
3/4 Inch19570
7/8 Inch19571-
1 Inch19572-
11/8 Inch1957313979
11/4 Inch1957413980
13/8 Inch1965613981
11/2 Inch1965713982
13/4 Inch1965813983
2 Inch1965913984

 

We forge Solid Copper Nuts And Bolts from ½” up to 4” in diameter, check Torque and weight chart of ASME SF 467 Hex head, heavy hex bolts and cap screws

 

Copper Hex Bolts Drive Style

Copper Hex Bolts Drive Style

 

ASME SF467 Cu Alloy Hex Nuts Dimensions Schedule

ASME SF467 Cu Alloy Hex Nuts Dimensions Schedule
Nominal Size or Basic Major Thread Diameter F G H
Width, Across Flats Width, Across Corners Thickness
Basic Max Min Max Min Basic Max Min
1/4.25007/16.438.428.505.4887/32.226.212
5/16.31251/2.500.489.577.55717/64.273.258
3/8.37509/16.562.551.650.62821/64.337.479
7/16.437511/16.688.675.794.7683/8.385.365
1/2.50003/4.750.736.866.8407/16.448.427
9/16.56257/8.875.8611.010.98231/64.496.473
5/8.625015/16.938.9221.0831.05135/64.559.535
3/4.75001-1/81.1251.0881.2991.24041/64.665.617
7/8.87501-5/161.3121.2691.5161.4473/4.776.724
11.00001-1/21.5001.4501.7321.65355/64.887.831
1-1/81.12501-11/161.6881.6311.9491.85931/32.999.939
1-3/81.37502-1/162.0621.9942.3822.2731-11/641.2061.138
1-1/21.5002-1/42.2502.1752.5982.4801-9/321.ASTM A194 GR. 81.245
1-5/81.62502-7/162.4382.3562.8152.6861-25/641.4291.353
1-3/41.75002-5/82.6252.5383.0312.8931-1/21.5401.460
22.000033.0002.9003.4643.3061-23/321.7631.675
2-1/42.25003-3/83.3753.2633.8973.7191-15/161.9861.890
2-1/22.50003-3/43.7503.6254.3304.1332-5/322.2092.105
2-3/42.75004-1/84.1253.9884.7634.5462-3/82.4312.319

 

Copper Nut Bolt Thread Style

Copper Nut Bolt Thread Style

 

Tightening and Preload Torque Table of Copper Eye Bolt

Fasteners Thread Tightening Torque (Nm) class Preload (Kn) Property Class/ Grade Coefficient of friction Min Breaking Torque
A2-70 (304) A1-50 (303) A2-70 (304) A4-80 (316) A4-80 (316) A1-50 (303) A1-50 (303) A1-70 (303) A4-80 (316)
M2.00 0.06 0.015 0.02 0.03 0.06 0.05 0.01 0.03 0.04 0.048
0.05 0.025 0.03 0.04 0.05 0.04 0.02
0.036 0.04 0.04 0.055 0.036 0.025 0.03
M6.00 6.085 2.08 5.09 8 6.085 3.02 0.01 9.03 13 15
5.054 4.01 8.08 11.08 5.054 2.059 0.02
4.049 4.08 10.04 13.09 4.049 2.009 0.03
M1.06 0.055 0.01 0.01 0.02 0.055 0.04 0.01 0.015 0.02 0.024
0.035 0.01 0.02 0.035 0.035 0.03 0.02
0.03 0.02 0.025 0.045 0.03 0.02 0.03
M3.00 1 0.085 1 1.03 1 0.09 0.01 1.01 1.06 1.08
0.065 1 1.01 1.06 0.065 0.06 0.02
0.045 1.025 1.035 1.085 0.045 0.04 0.03
M2.05 0.09 0.025 0.045 0.06 0.09 0.065 0.01 0.06 0.09 0.096
0.05 0.045 0.06 0.065 0.05 0.04 0.02
0.03 0.06 0.075 0.08 0.03 0.03 0.03
M5.00 4.085 1.06 3.04 4.06 4.085 2.026 0.01 5.05 7.08 8.08
3.093 2.04 5.01 6.09 3.093 1.083 0.02
3.019 2.08 6.01 8 3.019 1.049 0.03
M4.00 2.097 0.08 1.07 2.03 2.097 1.008 0.01 2.07 3.08 4.03
2.04 1.03 2.06 3.05 2.04 1.012 0.02
1.094 1.05 3 4.01 1.094 0.09 0.03
M8.00 12.06 6.08 14.05 19.03 12.06 5.086 0.01 23 32 37
10.02 10.01 21.04 28.07 10.02 4.075 0.02
8.085 11.09 25.05 33.09 8.085 3.085 0.03

 

we can offer below to you with quick delivery at Best price

Copper Carriage Bolts
Copper Carriage Bolts
Copper Bolts
ASTM F467 Copper Bolts
Copper Eye Bolt
Copper Eye Bolt
ASME SF467 Copper Screw
ASME SF467 Copper Screw

 

ASTM F467 Copper Fasteners Weight Chart

MM THREADS AS PER IS 1363/67
APPROXIMATE WEIGHT IN KGS FOR 100 NOS
LENGTH Steel Fasteners DIAMETER
M 12 M 5 M 6 M 8 M 14 M 10 M 22 M 18 M 20 M 16
16 mm 0.0448 0.0743 1.0590 3.0211
20 mm 4.0892 0.0598 0.0812 1.0711 3.0411
25 mm 5.0252 0.0660 0.0897 1.0871 8.0170 3.0660
30 mm 5.0574 0.0737 1.0010 2.0070 9.0690 3.0912 18.0657 10.0707
35 mm 5.0974 0.0804 1.0120 2.0271 10.0000 4.0223 16.0026 19.0608 11.0416
40 mm 6.0410 0.0881 1.0230 2.0470 10.0288 4.0533 16.0667 20.0747 12.0107
45 mm 6.0859 0.0958 1.0340 2.0671 10.0504 4.0840 17.0241 21.0739 12.0821
50 mm 7.0299 1.0030 1.0450 2.0870 11.0261 5.0155 28.0409 17.0857 22.0727 13.0624
55 mm 7.0740 1.0560 3.0071 11.0628 5.0464 30.0120 18.0868 23.0810 14.0409
60 mm 8.0183 1.0670 3.0270 12.0255 5.0774 32.0051 20.0000 25.0126 15.0244
65 mm 8.0621 1.0781 3.0472 12.0626 6.0083 34.0014 21.0008 26.0455 16.0026
70 mm 9.0058 1.0890 3.0671 12.0987 6.0394 35.0461 22.0124 27.0778 16.0835
75 mm 9.0506 2.0000 3.0873 13.0228 6.0702 39.0063 23.0256 29.0070 17.0606
80 mm 10.0000 2.0111 4.0072 13.0889 7.0013 40.0000 24.0510 30.0303 18.0248
90 mm 10.0917 4.0472 14.0925 7.0634 41.0667 26.0042 33.0113 19.0841
100 mm 11.0820 4.0873 16.0340 8.0251 46.0296 27.0778 35.0714 21.0459
110 mm 12.0723 17.0730 8.0881 47.0170 31.0250 38.0168 23.0041
120 mm 13.0624 18.0797 9.0506 50.0000 32.0895 40.0984 24.0631
130 mm 14.0535 20.0000 10.0101 52.0632 34.0722 43.0478 26.0316
140 mm 15.0432 20.0833 10.0707 55.0556 35.0461 46.0296 27.0933
150 mm 16.0340 22.0222 11.0312 58.0824 37.0594 48.0544 29.0412
160 mm 17.0241 24.0272 11.0905 61.0728 40.0984 50.0505 31.0056
170 mm 18.0116 12.0500 64.0935 53.0191 32.0680
180 mm 19.0011 26.0882 13.0123 67.0568 55.0556 34.0247
190 mm 19.0920 13.0736 70.0423 58.0140 35.0971
200 mm 20.0833 29.0586 14.0327 73.0529 49.0020 60.0976 37.0594
220 mm 22.0624 15.0528 79.0365 65.0789 40.0650
240 mm 24.0510 16.0722 84.0746 71.0429 43.0860
250 mm 25.0381 17.0301 87.0719 74.0627 45.0455
260 mm 26.0316 17.0921 90.0909 76.0923 47.0170
280 mm 28.0090 19.0157 98.0039 81.0967 50.0505
300 mm 29.0940 20.0325 104.0167 87.0719 53.0763
320 mm 31.0646 92.0593 56.0818
340 mm 33.0557 98.0039 60.0241
360 mm 35.0211 104.0167 63.0291
380 mm 37.0037 108.0696 66.0667
400 mm 39.0063   113.0636 69.0444

 

ANSI and/or ASME Standards (inch series) of Copper Machine Screws

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screw and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screw Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

 

Pure Copper Bolts Properties

C11000 ETP Copper
C17300 Beryllium Copper
C23000 Red Brass
C26000 Cartridge Brass 70/30
C27000 Yellow Brass 65%
C36000 Free Cutting Brass
C46400 Naval Brass
C51000 Phosphor Bronze
C61400 Aluminum Bronze
C62400 Aluminum Bronze
C63000 Nickel Aluminum Bronze
C63400 Aluminum Bronze
C65100 Silicon Bronze
C65500 Silicon Bronze
C67500 Manganese Bronze
C70600 Copper Nickel 90/10
C71500 Copper Nickel 70/30
C93200 Bearing Bronze

 

copper bolts for sale, Buy Copper Alloy studs, forged rings, U bolt, washers & Custom CNC Turned Parts at lowest price in India

 

Stock List of Copper Fasteners

  • Copper socket head bolt
  • Copper Fasteners
  • Copper Nuts and Bolts
  • Copper rivets
  • Copper Machine Screws
  • Copper Nut Bolt
  • Copper Zip Screws
  • Copper Set Screws
  • Copper Hex Bolts
  • Copper Carriage Bolts
  • Copper U Bolt
  • Copper Pan Head Screws
  • M6 Copper Bolt
  • Copper Bolts Nuts Washers
  • Copper Snap Fasteners
  • Copper Nut Bolt Price
  • Copper Stud Bolt
  • Copper hex screw
  • Solid Copper Wood Screws
  • Copper Bolt Nut
  • Pure Copper Bolts
  • Copper Sheet Metal Screws
  • Copper Flange bolt
  • Copper Eye Bolt
  • Copper washers
  • Copper spring

 

Cu Washers Dimensions

DIA

M16

M27

M22

M20

M24

M36

M30

Tolerance for OD Minus(-)

1.06

1.09

HARDNESS FOR PL. WASHER

35 TO 45 HRC

Hardness for Hot Dip Galvd washer

26 HRC

Inner Dia (Min) d1

18

22

24

 

26

30

33

Thickness (S)

3.01 TO 4.06

Outer Dia (Max) d2

34

42

44

 

50

56

60

Tolerance for ID Plus(+)

0.043

0.052

0.062

 

Copper Bolts Nuts Washers Application

  • military based operations
  • food and pharmaceutical industries
  • electrical wiring.
  • Gas Processing
  • Aircraft Exhaust Manifolds

 

General Styles and Types of Copper Nuts And Bolts

Unified Inch Coarse and Fine Threads
Steel Bolts Size Threads per Inch
Frac. [No.] Decimal UNC UNF
1/8 [#6]0.13803240
5/32 [#8]0.16403236
3/16 [#10]0.19002432
1/40.25002028
5/160.31251824
3/80.37501624
7/160.43751420
1/20.50001320
9/160.56251218
5/80.62501118
3/40.75001016
7/80.8750914
11.0000812, 14
1 1/81.1250712
1 1/41.2500712
1 3/81.3750612
1 1/21.5000612
1 3/41.75005-

 

Head Style of Copper Machine Screws

Head Style of Copper Machine Screws

 

Cu Alloy U Bolts Allowable Shear Stress Chart

Fasteners Specification & Condition Shear Stress (ksi) Finish 0.2% Yield Stress (ksi) Dia (in.) Fasteners Min. Tensile Requirement
Threads in Shear Plane No Threads in Shear Plane Tensile Strength (ksi)
Condition A (Annealed) in ASTM A276-71 12.6 Cold Finished Fasteners 45 18 90
Condition A (Annealed) in ASTM A276-71
Class 1 (solution treated) in ASTM A193-71
10.5 Hot Finished Fasteners 30 all 15 75
Condition B (cold-worked) in ASTM A276-71
Class 2 (solution treated and strain hardened) in ASTM A193-71*
17.5 Cold Finished Fasteners 100 25 125

 

Dimensions of ASTM F467 Copper Socket head cap Screw

Dimensions of ASTM F467 Copper Socket head cap Screw

 

D Nominal Size
Body Of Diameter
Head Thick.
Flats Acrosses
Bolts Corners Acrosses
D (Maxi.)D (Minimum)H (Maxi.)H (Minimum)F (Maxi.)F (Minimum)C (Maxi.)C (Mini.)
M1010.009.786.636.1717.0015.7318.4817.77
M1212.0011.737.764.2419.0017.7320.7820.03
M1414.0013.739.098.5122.0020.6724.2523.35
M1616.0015.7310.329.6824.0023.6727.7126.75
M2020.0019.6712.8812.1230.0029.1634.6432.95
M2424.0023.6715.4414.5636.0035.0041.5739.55
M3030.0029.6719.4817.9246.0045.0053.1250.85
M3636.0035.6123.3821.6355.0053.8063.5160.79
M4242.0041.3826.9725.0365.0062.9075.0671.71
M4848.0047.3831.0728.9375.0072.6086.6082.76
M5656.0055.2636.233.8085.0082.2098.1593.71
M6464.0063.2641.3238.6895.0091.80109.70104.65
M7272.0071.2646.4543.55105.00101.40121.24115.60
M8080.0079.2651.5848.42115.00111.00132.72126.54
M9090.0089.1357.7454.26130.00125.50150.11143.07
M10090.0099.1363.960.10145.00140.00167.43159.60

 

Types of Copper metric nuts

Full Hex Nuts Standard Pitch - ISO 4032 (DIN 934), Copper Full Hex Nuts Fine Pitch - ISO 8673 (DIN 934), Copper
Full Hex Nuts With Left Hand Thread (DIN 934), Copper Half Nuts Coarse Pitch ISO 4035 (DIN 439 part 2), Copper
Half Nuts Fine Pitch ISO 4035, Copper Half Nuts With Left Hand Thread, Copper
Thick Nyloc Nuts (Type P) ISO 10512 (DIN 982), Copper Thin Nyloc Nuts (Type T) ISO 10511 (DIN 985), Copper
Aerotight All Metal Locking Nuts, Copper Stover Nuts, Copper
Dome Nuts DIN 1587, Copper Dome Nyloc Nuts DIN 986, Copper
Cap Nuts DIN 917, Copper Hex Serrated Flange Nuts EN 1661 (DIN 6923), Copper
Hex Plain Flange Nuts, Copper Hex Plain (Non-Serrated) Flange Nuts with Nylon Insert, Copper
Hex Serrated Flange Nuts with Nylon Insert, Copper Hexagon Nut (Type B) with height 1.5 x thread diameter, Copper
Hexagon Nut with Collar and height 1.5 x thread diameter, Copper Wing Nuts DIN 315 American Form, Copper
Wing Nuts DIN 315 German Form, Copper Thumb Nuts High Type DIN 466, Copper
Square Nuts, Copper Square Thin Nuts, Copper
Sleeve Nuts With Pan Head and Slot, Copper Studding Connector Nuts, Copper
Castle Nuts DIN 935, Copper Hexagon Coupler Nut, Copper
Round Coupler Nut, Copper Counter Nuts DIN 7967, Copper
Hexagon Weld Nuts, Copper Square Weld Nuts DIN 928, Copper
Cage Nuts - Metric Thread, Copper Pronged Tee Nuts (4 Prongs), Copper
Slotted Round Nuts for hook spanner DIN 1804, Copper Plastic Head Covers for Hex Screws/Nuts, Copper

 

Full Range of Copper Bolts Nuts Washers both Imperial & Metric.

Hexagon Bolts / Set Screws Stud Bolts Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1

 

Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693
DIN 553 BS 2470 Spring Washers
DIN 438 DIN 127
BS 4168 BS 4464
BS 1802

 

Dimensions Table of Copper Bolts

Nominal Size Of (D)Body Diameter Of BoltsThickness Of HeadHastelloy C276 Bolts Across The FlatsHastelloy C276 Bolts Across Corners
MAXIMUM (D)MINIMUM (D)MAXIMUM (H)MINIMUM (H)MAXIMUM (F)MINIMUM (F)MAXIMUM (C)MINIMUM (C)
M 1010.009.786.636.1717.0015.7318.4817.77
M 1212.0011.737.764.2419.0017.7320.7820.03
M 1414.0013.739.098.5122.0020.6724.2523.35
M 1616.0015.7310.329.6824.0023.6727.7126.75
M 2020.0019.6712.8812.1230.0029.1634.6432.95
M 2424.0023.6715.4414.5636.0035.0041.5739.55
M 3030.0029.6719.4817.9246.0045.0053.1250.85
M 3636.0035.6123.3821.6355.0053.8063.5160.79
M 4242.0041.3826.9725.0365.0062.9075.0671.71
M 4848.0047.3831.0728.9375.0072.6086.6082.76
M 5656.0055.2636.233.8085.0082.2098.1593.71
M 6464.0063.2641.3238.6895.0091.80109.70104.65
M 7272.0071.2646.4543.55105.00101.40121.24115.60
M 8080.0079.2651.5848.42115.00111.00132.72126.54
M 9090.0089.1357.7454.26130.00125.50150.11143.07
M 10090.0099.1363.960.10145.00140.00167.43159.60

 

Torque Chart of Copper Carriage Bolts

Copper Bolt Torque Chart

 

Copper Heavy Hex Nuts Dimensions Chart

Dimensions of Hex Nuts

Nominal Size or Basic Major Thread Diameter
F
G
H
Width
Across Flats
Width
Across Corners
Thickness
Basic
Max
Min
Max
Min
Basic
Max
Min
1/4
.2500
7/16
.438
.428
.505
.488
7/32
.226
.212
5/16
.3125
1/2
.500
.489
.577
.557
17/64
.273
.258
3/8
.3750
9/16
.562
.551
.650
.628
21/64
.337
.479
7/16
.4375
11/16
.688
.675
.794
.768
3/8
.385
.365
1/2
.5000
3/4
.750
.736
.866
.840
7/16
.448
.427
9/16
.5625
7/8
.875
.861
1.010
.982
31/64
.496
.473
5/8
.6250
15/16
.938
.922
1.083
1.051
35/64
.559
.535
3/4
.7500
1-1/8
1.125
1.088
1.299
1.240
41/64
.665
.617
7/8
.8750
1-5/16
1.312
1.269
1.516
1.447
3/4
.776
.724
1
1.0000
1-1/2
1.500
1.450
1.732
1.653
55/64
.887
.831
1-1/8
1.1250
1-11/16
1.688
1.631
1.949
1.859
31/32
.999
.939
1-3/8
1.3750
2-1/16
2.062
1.994
2.382
2.273
1-11/64
1.206
1.138
1-1/2
1.500
2-1/4
2.250
2.175
2.598
2.480
1-9/32
1.ASTM A194 GR. 8
1.245
1-5/8
1.6250
2-7/16
2.438
2.356
2.815
2.686
1-25/64
1.429
1.353
1-3/4
1.7500
2-5/8
2.625
2.538
3.031
2.893
1-1/2
1.540
1.460
2
2.0000
3
3.000
2.900
3.464
3.306
1-23/32
1.763
1.675
2-1/4
2.2500
3-3/8
3.375
3.263
3.897
3.719
1-15/16
1.986
1.890
2-1/2
2.5000
3-3/4
3.750
3.625
4.330
4.133
2-5/32
2.209
2.105
2-3/4
2.7500
4-1/8
4.125
3.988
4.763
4.546
2-3/8
2.431
2.319

 

Copper Nuts Size Chart

Nut Size
(mm)
Diameter*
(mm)
Height
(mm)
Hex Nut
Jam Nut
Nylock Nut
2
4
1.6
1.2
-
2.5
5
2
1.6
-
3
5.5
2.4
1.8
4
4
7
3.2
2.2
5
5
8
4
2.7
5
6
10
5
3.2
6
7
11
5.5
3.5
-
8
13
6.5
4
8
10
17
8
5
10
12
19
10
6
12
14
22
11
7
14
16
24
13
8
16
18
27
15
9
18.5
20
30
16
10
20
* This is the diameter across the flats. It is also the size of wrench to use.

 

Copper Threaded Rod Dimensions chart

Copper Threaded Rod Dimensions chart
D

P
(mm)

D

P
(mm)

M For Metric 20.4M For Metric 201.5/2.5
M For Metric 2.50.45M For Metric 221.5/2.5
M For Metric 30.5M For Metric 242/3
M For Metric 3.50.6M For Metric 272/3
M For Metric 40.7M For Metric 302/3.5
M For Metric 50.8M For Metric 332/3.5
M For Metric 61M For Metric 363/4
M For Metric 81/1.25M For Metric 393/4
M For Metric 101/1.25/1.5M For Metric 423/4.5
M For Metric 121.25/1.5/1.75M For Metric 453/4.5
M For Metric 141.5/2M For Metric 483/5
M For Metric 161.5/2M523/5
M181.5/2.5

 

ASME SF467 Cu Alloy Machine Screws Size chart

ASME SF467 Cu Alloy Machine Screws Size chart

 

Copper Heavy Hex Bolts Dimensions Standard

Copper Heavy Hex Bolts Dimensions Standard
Diameter Of (D)
Body Diameter Of Heavy Hex Bolts (D)
Heavy Hex Bolts Across the Flats (F)
Heavy Hex Bolts Across the Corners ©
Height Of (H) Head
Lengths Of (T) Thread
MAXIMUM
MINIMUM
MAXIMUM
MINIMUM
MAXIMUM
MINIMUM
MAXIMUM
MINIMUM
< 6”
> 6”
1/2
0.515
0.482
0.875
0.85
1.01
0.969
0.364
0.302
1.25
1.5
5/8
0.642
0.605
1.062
1.031
1.227
1.175
0.444
0.378
1.5
1.75
3/4
0.768
0.729
1.25
1.212
1.443
1.383
0.524
0.455
1.75
2
7/8
0.895
0.852
1.438
1.394
1.66
1.589
0.604
0.531
2
2.25
1
1.022
0.976
1.625
1.575
1.876
1.796
0.7
0.591
2.25
2.5
1 1/8
1.149
1.098
1.812
1.756
2.093
2.002
0.78
0.658
2.5
2.75
1 1/4
1.277
1.223
2
1.938
2.309
2.209
0.876
0.749
2.75
3
1 3/8
1.404
1.345
2.188
2.119
2.526
2.416
0.94
0.81
3
3.25
1 1/2
1.531
1.47
2.375
2.3
2.742
2.622
1.036
0.902
3.25
3.5
1 3/4
1.785
1.716
2.75
2.662
3.175
3.035
1.196
1.054
3.75
4
2
2.039
1.964
3.125
3.025
3.608
3.449
1.388
1.175
4.25
4.5
2 1/4
2.305
2.214
3.5
3.388
4.041
3.862
1.548
1.327
4.75
5
2 1/2
2.559
2.461
3.875
3.75
4.474
4.275
1.708
1.479
5.25
5.5
2 3/4
2.827
2.711
4.25
4.112
4.907
4.688
1.869
1.632
5.75
6
3
3.081
2.961
4.625
4.475
5.34
5.102
2.06
1.815
6.25
6.

 

Check our reference of material in these countries

Dammam -KSA, Indonesia, Belgium, Philippines Copper Hex Head Bolt M6
Qatar, France, Thailand, Europe ASME/ANSI B 18.2.1 Copper Hex Bolt
Czechia, Germany, Malaysia, Thailand Copper DIN933 DIN931 Hex Head Bolt
Malaysia, USA, Finland, Bangladesh M3 - M40 Copper Weld Bolt
South Africa, Saudi Arabia (KSA), Brazil, Kuwait M8 M10 full thread Brass hex head bolt DIN933
Bahrain, South Africa, Singapore Semi Tubular Drilling Copper Fastener for Quick-Release
Philippines, Australia, Nigeria, UK Copper Flat Head Solid Rivets Fasteners
Oman, Malaysia, UAE, Hong Kong Copper Drop in Anchor M10 Fastener
Chile, Italy, Singapore, Iran Copper Threaded Rod 8mm
United Arab Emirates (UAE), Turkey, Malaysia, Norway M24 DIN315 Copper Scaffolding Butterfly Wing Nut Fastener
Netherlands, Malaysia, Dubai, Russia Copper- Zinc Plated Stainless Steel Adjustable Fasteners
Egypt, Spain, UK, Mexico Milling Grooved Copper Pin Fastener
United Kingdom -UK, Europe, UAE, Malaysia Copper Quick Release Pin Fastener with Drilling Head