Siddhagiri Metals & Tubes, is a Monel Fasteners suppliers. Our product is been fabricated by using high quality raw material. We provide it in different grades, sizes and specifications according to the need and satisfaction of the customers.Monel Bolts & Nuts are a type of fastener which is used to secure or fasten materials together. The type of monelBolt are wheel bolts, eye bolts and machine bolts while types of monelnuts are expansion nuts, cap nuts, and u-nuts. As it work-hardens very quickly it is very difficult to machine. It needs to be worked and turned and at low feed rates and slow speeds.
We are the leading Monel Bolts Suppliers, our specialized technical team ensures customer satisfaction in teams of quality. Monel Threaded Rod is a fastener and functions thanks to the threading, which causes a tightening action from the rotational movement. It allows other fixings like bolts and nuts to easily screw or fasten to it. It is resistant to corrosion and acids, and can withstand a fire in pure oxygen.
Monel Rivets is a mechanical fastener consisting of a smooth, cylindrical shaft with a head.It is ideal for supporting tensile loads and shear, as well as watertight applications. It is usually used in applications with highly corrosive conditions. It provides excellent mechanical properties at subzero temperatures.
Monel Pop Rivets use a hollow shaft which reduces the ability to withstand shear loads. The strength of the materials used also depends on the power of riveting tools which is available.Its strength and hardness increase with only slight impairment of ductility or impact resistance. Monel Blind Rivets is a rivet that can be completely installed from one side, unlike machine screws and nuts, which requires access to both sides of the material. It does not undergo a ductile-to-brittle transition even when it is cooled to the temperature of liquid hydrogen. Monel Rivets Aircraft is used for the critical components of an aircraft's body. It is preferred due to its ability to withstand extreme stress without breaking or otherwise succumbing to damage.
Table of Content
Standard | ASTM F468/ ASME SA468 |
---|---|
Size | M 02 to M 33 |
Length | 3 mm to 200 mm |
Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: | DIN, ISO, JIS, GB, IS, BS, ASTM, ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
SCOPE OF MANUFACTURE |
|
Dia | M6 to M64 (1/4" - 2.5") |
Length | 12 MM - 500 MM (Upto 20 Inch) |
IS | 1363, 1364 |
DIN | 931, 933 |
ISO | ISO 3506 |
Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
Finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
Production process | M2-M24: Cold Froging, hot forging M24-M100, , machining and CNC for Customized connecting element |
Origin and service-region: | European, Origin of Western European. However projects with eastern origin are possible on request. |
Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fasteners Etc. |
Types | Nuts, Bolts, Screws, Socket Screw, Sockets, Studs, Screw, Nut, Spring Washers, Hex Set Screw, Socket Hexagon Head Screw, Cap Screw, Wing Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Studs, Anchors, Hex Nut,Marine Anchors, Hexagon Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Anchor Bolt, U- Bolts, J Bolts, T-Head Bolts, Mushroom Head Square Neck Bolts, Eye Bolt, Foundation Bolts, Structural Bolts |
Monel Carriage Bolts
Monel Flange Bolts
Monel Alloy Hex Head Bolts
Monel Stud Bolts
Monel Threaded Rod
Monel Self Locking Nuts
Monel Wing Nuts
Alloy Wing Screw
Description | Price |
CNC Machining Monel Square Bolt Fastener | US $ 1 / Piece |
Exotic Alloy Monel Fastener | US $ 1 / Piece |
Monel Stud Bolt | US $ 1.28-2 / Piece |
Monel Hex Bolt | US $ 0.01-0.2 / Piece |
Exotic Alloy Monel K500 Hex Nut | US $ 1 / Piece |
DIN934 Monel Hex Head Bolt | US $ 4-10 / Piece |
M10 M16 Monel Wing Screw | US $ 0.001-0.9 / Piece |
Monel Allen Bolt | US $ 1 / Piece |
Torque Specifications | |||||||
---|---|---|---|---|---|---|---|
Bolt Size, Inches or # | Threads, Per Inch | Standard Dry Torque in Inch-Pounds | |||||
Monel | Monel | ||||||
#2 | 56 | 2.5 | 2.6 | ||||
64 | 3.0 | 3.2 | |||||
#3 | 48 | 3.9 | 4.0 | ||||
56 | 4.4 | 4.6 | |||||
#4 | 40 | 5.2 | 5.5 | ||||
48 | 6.6 | 6.9 | |||||
#5 | 40 | 7.7 | 8.1 | ||||
44 | 9.4 | 9.8 | |||||
#6 | 32 | 9.6 | 10.1 | ||||
40 | 12.1 | 12.7 | |||||
#8 | 32 | 19.8 | 20.7 | ||||
36 | 22.0 | 23.0 | |||||
#10 | 24 | 22.8 | 23.8 | ||||
32 | 31.7 | 33.1 | |||||
Bolt Size, Inches or # | Threads, Per Inch | Standard Dry Torque in Inch-Pounds | |||||
Monel | Monel | ||||||
1/4 | 20 | 75.2 | 78.8 | ||||
28 | 94.0 | 99.0 | |||||
5/16 | 18 | 132 | 138 | ||||
24 | 142 | 147 | |||||
3/8 | 16 | 236 | 247 | ||||
24 | 259 | 271 | |||||
7/16 | 14 | 376 | 393 | ||||
20 | 400 | 418 | |||||
1/2 | 13 | 517 | 542 | ||||
20 | 541 | 565 | |||||
Bolt Size, Inches or # | Threads, Per Inch | Standard Dry Torque in Inch-Pounds | |||||
Monel | Monel | ||||||
9/16 | 12 | 682 | 713 | ||||
18 | 752 | 787 | |||||
5/8 | 11 | 1110 | 1160 | ||||
18 | 1244 | 1301 | |||||
3/4 | 10 | 1530 | 1582 | ||||
16 | 1490 | 1558 | |||||
7/8 | 9 | 2328 | 2430 | ||||
14 | 2318 | 2420 | |||||
1 | 8 | 3440 | 3595 | ||||
14 | 3110 | 3250 | |||||
Bolt Size, Inches or # | Threads, Per Inch | Standard Dry Torque in Foot-Pounds | |||||
Monel | Monel | ||||||
1 1/8 | 7 | 413 | 432 | ||||
12 | 390 | 408 | |||||
1 1/4 | 7 | 523 | 546 | ||||
12 | 480 | 504 | |||||
1 1/2 | 6 | 888 | 930 | ||||
12 | 703 | 732 |
Nominal Size, inch. | Coarse Threads - UNC | Fine Threads - UNF | 8 Thread Series - 8UN | |||
---|---|---|---|---|---|---|
Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | |
1/4 | 20 | 0.0318 | 28 | 0.0364 | -- | -- |
5/16 | 18 | 0.0524 | 24 | 0.0580 | -- | -- |
3/18 | 16 | 0.0775 | 24 | 0.0878 | -- | -- |
7/16 | 14 | 0.1063 | 20 | 0.1187 | ||
1/2 | 13 | 0.1419 | 20 | 0.1599 | ||
9/16 | 12 | 0.1820 | 18 | 0.2030 | ||
5/8 | 11 | 0.2260 | 18 | 0.2560 | ||
3/4 | 10 | 0.3340 | 16 | 0.3730 | ||
7/8 | 9 | 0.4620 | 14 | 0.5090 | ||
1 | 8 | 0.6060 | 12 | 0.6630 | ||
1 1/8 | 7 | 0.7630 | 12 | 0.8560 | 8 | 0.790 |
1 1/4 | 7 | 0.9690 | 12 | 1.0730 | 8 | 1.000 |
1 3/8 | 6 | 1.1550 | 12 | 1.3150 | 8 | 1.233 |
1 1/2 | 6 | 1.4050 | 12 | 1.5810 | 8 | 1.49 |
Monel Screws | 12 Point Screws, Button Head Cap Screws, Flat Head Screws, Hex Head Cap Screws, Pan Head Screws, Security Screws, Set Screws, Socket Head Cap Screws, Vented Screws |
| ||
Monel Bolts | Hex Head Bolts, Shoulder Bolts, Wedge Anchor Bolts | • DIN 931 • DIN 933 • ISO 4014 • ISO 4017 • ISO 7370 | ||
Monel Nuts | Hex Nuts, Lock Nuts | • DIN 439 / ISO 4035 • DIN 934 / ISO 4032 • DIN 985 / ISO 7040 • DIN 986 • DIN 980 / ISO 7042 / ISO 19513 • DIN 6923 / ISO 4161 | ||
Monel Studs/Rod | Studs, Threaded Rod, Weld Studs | • DIN 975 • DIN 976 | ||
Monel Washers | Flat Washers, Lock Washer | • DIN 125 / ISO 7089 / ISO 7090 • DIN 126 / ISO 7091 • DIN 127 / ISO 7090 • DIN 9021 / ISO 7093 | ||
Monel Hose Clamps | Medium Duty Hose Clamps |
Bolts Size | A (max) | B | C (min) | D | E | F Thread Length for Bolts Length | ||
---|---|---|---|---|---|---|---|---|
max | min | 6" and shorter | over 6" | |||||
1/4" | 0.260 | 3/8 | 0.498 | 11/64 | 0.03 | 0.01 | 0.750 | 1.000 |
5/16" | 0.324 | 1/2 | 0.665 | 13/64 | 0.03 | 0.01 | 0.875 | 1.125 |
3/8" | 0.388 | 9/16 | 0.747 | 1/4 | 0.03 | 0.01 | 1.000 | 1.250 |
7/16" | 0.452 | 5/8 | 0.828 | 19/64 | 0.03 | 0.01 | 1.125 | 1.375 |
1/2" | 0.515 | 3/4 | 0.995 | 21/64 | 0.03 | 0.01 | 1.250 | 1.500 |
5/8" | 0.642 | 15/16 | 1.244 | 27/64 | 0.06 | 0.02 | 1.500 | 1.750 |
3/4" | 0.768 | 1-1/8 | 1.494 | 1/2 | 0.06 | 0.02 | 1.750 | 2.000 |
7/8" | 0.895 | 1-5/16 | 1.742 | 19/32 | 0.06 | 0.02 | 2.000 | 2.250 |
1" | 1.022 | 1-1/2 | 1.991 | 21/32 | 0.09 | 0.03 | 2.250 | 2.500 |
1-1/8" | 1.149 | 1-11/16 | 2.239 | 3/4 | 0.09 | 0.03 | 2.500 | 2.750 |
1-1/4" | 1.277 | 1-7/8 | 2.489 | 27/32 | 0.09 | 0.03 | 2.750 | 3.000 |
1-3/8" | 1.404 | 2-1/16 | 2.738 | 29/32 | 0.09 | 0.03 | 3.000 | 3.250 |
1-1/2" | 1.531 | 2-1/4 | 2.986 | 1 | 0.09 | 0.03 | 3.250 | 3.500 |
Nominal Sizes | F | G | H | ||||||
Width Across Flats | Width Across Corners | Thickness | |||||||
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 |
Bolt Size | USS | SAE | ||||
OD (in.) | ID (in.) | Thickness | OD (in.) | ID (in.) | Thickness | |
1/8 (#6) | 0.375 | 0.156 | .036/.065 | |||
5/32 (#8) | 0.438 | 0.188 | .036/.065 | |||
3/16 (#10) | 0.560 | 0.250 | .036/.065 | 0.500 | 0.220 | .036/.065 |
7/32 (#12) | 0.562 | 0.250 | .051/.080 | |||
1/4 (#14) | 0.734 | 0.312 | .051/.080 | 0.625 | 0.281 | .051/.080 |
5/16 | 0.875 | 0.375 | .064/.104 | 0.688 | 0.344 | .051/.080 |
3/8 | 1.000 | 0.438 | .064/.104 | 0.812 | 0.406 | .051/.080 |
7/16 | 1.250 | 0.500 | .064/.104 | 0.922 | 0.469 | .051/.080 |
1/2 | 1.375 | 0.562 | .086/.132 | 1.062 | 0.531 | .074/.121 |
9/16 | 1.469 | 0.625 | .086/.132 | 1.156 | 0.594 | .074/.121 |
5/8 | 1.750 | 0.688 | .108/.160 | 1.312 | 0.656 | .074/.121 |
3/4 | 2.000 | 0.812 | .122/.177 | 1.469 | 0.812 | .108/.160 |
7/8 | 2.250 | 0.938 | .136/.192 | 1.750 | 0.938 | .108/.160 |
1 | 2.500 | 1.062 | .136/.192 | 2.000 | 1.062 | .108/.160 |
1 1/8 | 2.750 | 1.250 | .136/.192 | 2.250 | 1.250 | .108/.160 |
1 1/4 | 3.000 | 1.375 | .136/.192 | 2.500 | 1.375 | .136/.192 |
1 3/8 | 3.250 | 1.500 | .153/.213 | 2.750 | 1.500 | .136/.213 |
1 1/2 | 3.500 | 1.625 | .153/.213 | 3.000 | 1.625 | .153/.213 |
1 5/8 | 3.750 | 1.750 | .153/.213 | |||
1 3/4 | 4.000 | 1.875 | .153/.213 | |||
1 7/8 | 4.250 | 2.000 | .153/.213 | |||
2 | 4.500 | 2.125 | .153/.213 | |||
2 1/4 | 4.750 | 2.375 | .320/.248 | |||
2 1/2 | 5.000 | 2.625 | .210/.280 | |||
2 3/4 | 5.250 | 2.875 | .228/.410S | |||
3 | 5.500 | 3.125 | .249/.327 |
Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in | Ring Joint | |
1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 |
Flange Size | B16.5 Class 300 RF/ Ring Gaskets | ||||
---|---|---|---|---|---|
Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence* | ||||
1st | 2nd | Final | Dwg/No. | Stud Bolts Size | |
1/2 | 10 | 20 | 30 | 4-bolt | 1/2 |
3/4 | 15 | 30 | 50 | 4-bolt | 5/8 |
1 | 21 | 42 | 70 | 4-bolt | 5/8 |
1-1/4 | 30 | 60 | 100 | 4-bolt | 5/8 |
1-1/2 | 45 | 90 | 150 | 4-bolt | 3/4 |
2 | 33 | 66 | 110 | 8-bolt | 5/8 |
2-1/2 | 42 | 84 | 140 | 8-bolt | 3/4 |
3 | 60 | 120 | 200 | 8-bolt | 3/4 |
3-1/2 | 60 | 120 | 200 | 8-bolt | 3/4 |
4 | 60 | 120 | 200 | 8-bolt | 3/4 |
5 | 60 | 120 | 200 | 8-bolt | 3/4 |
6 | 60 | 120 | 200 | 12-bolt | 3/4 |
8 | 95 | 190 | 320 | 12-bolt | 7/8 |
10 | 147 | 294 | 490 | 16-bolt | 1 |
12 | 213 | 426 | 710 | 16-bolt | 1-1/8 |
14 | 195 | 390 | 650 | 20-bolt | 1-1/8 |
16 | 273 | 546 | 910 | 20-bolt | 1-1/4 |
18 | 300 | 600 | 1,000 | 24-bolt | 1-1/4 |
20 | 300 | 600 | 1,000 | 24-bolt | 1-1/4 |
24 | 465 | 930 | 1,550 | 24-bolt | 1-1/2 |
Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
Width Across Flats | Width Across Corners | Thickness | |||||||
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 | .2500 | 1/2 | .500 | .488 | .577 | .556 | 15/64 | .250 | .218 |
5/16 | .3125 | 9/16 | .562 | .546 | .650 | .622 | 19/64 | .314 | .280 |
3/8 | .3750 | 11/16 | .688 | .669 | .794 | .763 | 23/64 | .377 | .341 |
7/16 | .4375 | 3/4 | .750 | .728 | .866 | .830 | 27/64 | .441 | .403 |
1/2 | .5000 | 7/8 | .875 | .850 | 1.010 | .969 | 31/64 | .504 | .464 |
9/16 | .5625 | 15/16 | .938 | .909 | 1.083 | 1.037 | 35/64 | .568 | .526 |
5/8 | .6250 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 39/64 | .631 | .587 |
3/4 | .7500 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.382 | 47/64 | .758 | .710 |
7/8 | .8750 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 55/64 | .885 | .833 |
1 | 1.0000 | 1-5/8 | 1.325 | 1.575 | 1.876 | 1.796 | 63/64 | 1.012 | .956 |
1-1/8 | 1.1250 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 1-7/64 | 1.139 | 1.079 |
1-1/4 | 1.2500 | 2 | 2.000 | 1.938 | 2.309 | 2.209 | 1-7/32 | 1.251 | 1.187 |
1-3/8 | 1.3750 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 1-11/32 | 1.378 | 1.460 |
1-1/2 | 1.5000 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1-15/32 | 1.505 | 1.433 |
1-5/8 | 1.6250 | 2-9/16 | 2.562 | 2.481 | 2.959 | 2.828 | 1-19/32 | 1.632 | 1.556 |
1-3/4 | 1.7500 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-23/32 | 1.759 | 1.679 |
2 | 2.0000 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-31/32 | 2.013 | 1.925 |
2-1/4 | 2.2500 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 2-13/64 | 2.251 | 2.155 |
2-1/2 | 2.5000 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 2-29/64 | 2.505 | 2.401 |
2-3/4 | 2.7500 | 4-1/4 | 4.250 | 4.112 | 4.907 | 4.688 | 2-45/64 | 2.759 | 2.647 |
3 | 3.0000 | 4-5/8 | 4.625 | 4.475 | 5.340 | 5.102 | 2-61/64 | 3.013 | 2.893 |
3-1/4 | 3.2500 | 5 | 5.000 | 4.838 | 5.774 | 5.515 | 3-3/16 | 3.252 | 3.124 |
3-1/2 | 3.5000 | 5-3/8 | 5.375 | 5.200 | 6.207 | 5.928 | 3-7/16 | 3.506 | 3.370 |
3-3/4 | 3.7500 | 5-3/4 | 5.750 | 5.562 | 6.640 | 6.341 | 3-11/16 | 3.670 | 3.616 |
4 | 4.0000 | 6-1/8 | 6.125 | 5.925 | 7.073 | 6.755 | 3-15/16 | 4.014 | 3.862 |
Size | USS | SAE | ||||
---|---|---|---|---|---|---|
Inside Diameter (A) | Outside Diameter (B) | Thickness (C) | Inside Diameter (A) | Outside Diameter (B) | Thickness (C) | |
#2 | 3/32" | 1/4" | 0.020" | |||
#4 | 1/8" | 5/16" | 0.032" | |||
#6 | 5/32" | 3/8" | 0.049" | |||
#8 | 3/16" | 7/16" | 0.049" | |||
#10 | 7/32" | 1/2" | 0.049" | |||
#12 | 1/4" | 9/16" | 0.065" | |||
1/4" | 5/16" | 0.734" | 0.065" | 9/32" | 5/8" | 0.065" |
5/16" | 3/8" | 7/8" | 0.083" | 11/32" | 11/16" | 0.065" |
3/8" | 7/16" | 1" | 0.083" | 13/32" | 13/16" | 0.065" |
7/16" | 1/2" | 1-1/4" | 0.083" | 15/32" | 15/16" | 0.065" |
1/2" | 9/16" | 1-3/8" | 0.109" | 17/32" | 1-1/16" | 0.095" |
9/16" | 5/8" | 1-15/32" | 0.109" | 19/32" | 1-5/32" | 0.095" |
5/8" | 11/16" | 1-3/4" | 0.134" | 21/32" | 1-5/16" | 0.095" |
3/4" | 13/16" | 2" | 0.148" | 13/16" | 1-15/32" | 0.134" |
7/8" | 15/16" | 2-1/4" | 0.165" | 15/16" | 1-3/4" | 0.134" |
1" | 1-1/16" | 2-1/2" | 0.165" | 1-1/16" | 2" | 0.134" |
1-1/8" | 1-1/4" | 2-3/4" | 0.165" | |||
1-1/4" | 1-3/8" | 3" | 0.165" | |||
1-3/8" | 1-1/2" | 3-1/4" | 0.180" | |||
1-1/2" | 1-5/8" | 3-1/2" | 0.180" | |||
1-5/8" | 1-3/4" | 3-3/4" | 0.180" | |||
1-3/4" | 1-7/8" | 4" | 0.180" | |||
2" | 2-1/8" | 4-1/2" | 0.213" |
MM THREADS AS PER IS 1363/67 | ||||||||||
APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
LENGTH | Steel Fasteners DIAMETER | |||||||||
M 12 | M 5 | M 6 | M 8 | M 14 | M 10 | M 22 | M 18 | M 20 | M 16 | |
16 mm | 0.0448 | 0.0743 | 1.0590 | 3.0211 | ||||||
20 mm | 4.0892 | 0.0598 | 0.0812 | 1.0711 | 3.0411 | |||||
25 mm | 5.0252 | 0.0660 | 0.0897 | 1.0871 | 8.0170 | 3.0660 | ||||
30 mm | 5.0574 | 0.0737 | 1.0010 | 2.0070 | 9.0690 | 3.0912 | 18.0657 | 10.0707 | ||
35 mm | 5.0974 | 0.0804 | 1.0120 | 2.0271 | 10.0000 | 4.0223 | 16.0026 | 19.0608 | 11.0416 | |
40 mm | 6.0410 | 0.0881 | 1.0230 | 2.0470 | 10.0288 | 4.0533 | 16.0667 | 20.0747 | 12.0107 | |
45 mm | 6.0859 | 0.0958 | 1.0340 | 2.0671 | 10.0504 | 4.0840 | 17.0241 | 21.0739 | 12.0821 | |
50 mm | 7.0299 | 1.0030 | 1.0450 | 2.0870 | 11.0261 | 5.0155 | 28.0409 | 17.0857 | 22.0727 | 13.0624 |
55 mm | 7.0740 | 1.0560 | 3.0071 | 11.0628 | 5.0464 | 30.0120 | 18.0868 | 23.0810 | 14.0409 | |
60 mm | 8.0183 | 1.0670 | 3.0270 | 12.0255 | 5.0774 | 32.0051 | 20.0000 | 25.0126 | 15.0244 | |
65 mm | 8.0621 | 1.0781 | 3.0472 | 12.0626 | 6.0083 | 34.0014 | 21.0008 | 26.0455 | 16.0026 | |
70 mm | 9.0058 | 1.0890 | 3.0671 | 12.0987 | 6.0394 | 35.0461 | 22.0124 | 27.0778 | 16.0835 | |
75 mm | 9.0506 | 2.0000 | 3.0873 | 13.0228 | 6.0702 | 39.0063 | 23.0256 | 29.0070 | 17.0606 | |
80 mm | 10.0000 | 2.0111 | 4.0072 | 13.0889 | 7.0013 | 40.0000 | 24.0510 | 30.0303 | 18.0248 | |
90 mm | 10.0917 | 4.0472 | 14.0925 | 7.0634 | 41.0667 | 26.0042 | 33.0113 | 19.0841 | ||
100 mm | 11.0820 | 4.0873 | 16.0340 | 8.0251 | 46.0296 | 27.0778 | 35.0714 | 21.0459 | ||
110 mm | 12.0723 | 17.0730 | 8.0881 | 47.0170 | 31.0250 | 38.0168 | 23.0041 | |||
120 mm | 13.0624 | 18.0797 | 9.0506 | 50.0000 | 32.0895 | 40.0984 | 24.0631 | |||
130 mm | 14.0535 | 20.0000 | 10.0101 | 52.0632 | 34.0722 | 43.0478 | 26.0316 | |||
140 mm | 15.0432 | 20.0833 | 10.0707 | 55.0556 | 35.0461 | 46.0296 | 27.0933 | |||
150 mm | 16.0340 | 22.0222 | 11.0312 | 58.0824 | 37.0594 | 48.0544 | 29.0412 | |||
160 mm | 17.0241 | 24.0272 | 11.0905 | 61.0728 | 40.0984 | 50.0505 | 31.0056 | |||
170 mm | 18.0116 | 12.0500 | 64.0935 | 53.0191 | 32.0680 | |||||
180 mm | 19.0011 | 26.0882 | 13.0123 | 67.0568 | 55.0556 | 34.0247 | ||||
190 mm | 19.0920 | 13.0736 | 70.0423 | 58.0140 | 35.0971 | |||||
200 mm | 20.0833 | 29.0586 | 14.0327 | 73.0529 | 49.0020 | 60.0976 | 37.0594 | |||
220 mm | 22.0624 | 15.0528 | 79.0365 | 65.0789 | 40.0650 | |||||
240 mm | 24.0510 | 16.0722 | 84.0746 | 71.0429 | 43.0860 | |||||
250 mm | 25.0381 | 17.0301 | 87.0719 | 74.0627 | 45.0455 | |||||
260 mm | 26.0316 | 17.0921 | 90.0909 | 76.0923 | 47.0170 | |||||
280 mm | 28.0090 | 19.0157 | 98.0039 | 81.0967 | 50.0505 | |||||
300 mm | 29.0940 | 20.0325 | 104.0167 | 87.0719 | 53.0763 | |||||
320 mm | 31.0646 | 92.0593 | 56.0818 | |||||||
340 mm | 33.0557 | 98.0039 | 60.0241 | |||||||
360 mm | 35.0211 | 104.0167 | 63.0291 | |||||||
380 mm | 37.0037 | 108.0696 | 66.0667 | |||||||
400 mm | 39.0063 | 113.0636 | 69.0444 |
NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS | ACROSS THE FLATS | ACROSS CORNERS | ||||
---|---|---|---|---|---|---|---|---|
D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
|
|
Size | Finished Hex | Heavy Hex | Finished Jam | Heavy Hex Jam | Square | Heavy Square |
1⁄2“ Nut | 3.75 | 6.54 | 2.62 | 4.00 | 5.78 | 7.87 |
5⁄8“ Nut | 7.33 | 11.9 | 4.93 | 6.96 | 10.8 | 14.3 |
3⁄4“ Nut | 11.9 | 19.3 | 7.70 | 11.0 | 15.4 | 23.5 |
7⁄8“ Nut | 19.0 | 29.7 | 12.0 | 16.7 | 24.5 | 36.2 |
1″ Nut | 28.3 | 42.5 | 17.6 | 23.5 | 36.3 | 51.5 |
11⁄8“ Nut | 40.3 | 59.2 | 24.7 | 32.4 | 52.5 | 72.4 |
11⁄4“ Nut | 54.3 | 78.6 | 36.1 | 45.8 | 70.6 | 95.5 |
13⁄8“ Nut | 73.0 | 102 | 47.9 | 59.3 | 94.5 | 125.0 |
11⁄2“ Nut | 94.3 | 131 | 60.9 | 74.8 | 122 | 161 |
15⁄8“ Nut | 162 | 91.6 | ||||
13⁄4“ Nut | 151 | 204 | 100 | 114 | ||
17⁄8“ Nut | 241 | 134 | ||||
2″ Nut | 224 | 299 | 140 | 165 | ||
21⁄4“ Nut | 419 | 227 | ||||
21⁄2“ Nut | 564 | 332 | ||||
23⁄4“ Nut | 738 | 429 | ||||
3″ Nut | 950 | 545 | ||||
31⁄4“ Nut | 1194 | 651 | ||||
31⁄2“ Nut | 1526 | 851 | ||||
33⁄4“ Nut | 1812 | 1005 | ||||
4″ Nut | 2180 | 1200 |
D | P | D
| P |
---|---|---|---|
M For Metric 2 | 0.4 | M For Metric 20 | 1.5/2.5 |
M For Metric 2.5 | 0.45 | M For Metric 22 | 1.5/2.5 |
M For Metric 3 | 0.5 | M For Metric 24 | 2/3 |
M For Metric 3.5 | 0.6 | M For Metric 27 | 2/3 |
M For Metric 4 | 0.7 | M For Metric 30 | 2/3.5 |
M For Metric 5 | 0.8 | M For Metric 33 | 2/3.5 |
M For Metric 6 | 1 | M For Metric 36 | 3/4 |
M For Metric 8 | 1/1.25 | M For Metric 39 | 3/4 |
M For Metric 10 | 1/1.25/1.5 | M For Metric 42 | 3/4.5 |
M For Metric 12 | 1.25/1.5/1.75 | M For Metric 45 | 3/4.5 |
M For Metric 14 | 1.5/2 | M For Metric 48 | 3/5 |
M For Metric 16 | 1.5/2 | M52 | 3/5 |
M18 | 1.5/2.5 |
Diameter Of (D) | Body Diameter Of Heavy Hex Bolts (D) | Heavy Hex Bolts Across the Flats (F) | Heavy Hex Bolts Across the Corners © | Height Of (H) Head | Lengths Of (T) Thread | |||||
---|---|---|---|---|---|---|---|---|---|---|
MAXIMUM | MINIMUM | MAXIMUM | MINIMUM | MAXIMUM | MINIMUM | MAXIMUM | MINIMUM | < 6” | > 6” | |
1/2 | 0.515 | 0.482 | 0.875 | 0.85 | 1.01 | 0.969 | 0.364 | 0.302 | 1.25 | 1.5 |
5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
1 | 1.022 | 0.976 | 1.625 | 1.575 | 1.876 | 1.796 | 0.7 | 0.591 | 2.25 | 2.5 |
1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
1 3/8 | 1.404 | 1.345 | 2.188 | 2.119 | 2.526 | 2.416 | 0.94 | 0.81 | 3 | 3.25 |
1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
2 1/2 | 2.559 | 2.461 | 3.875 | 3.75 | 4.474 | 4.275 | 1.708 | 1.479 | 5.25 | 5.5 |
2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6. |
Designation | C% | Co% | Cr% | Mo% | Ni% | V% | W% | Ai% | Cu% | Nb/Cb Ta% | Ti% | Fe% | Sonstige Autres-Other % |
Monel 400 | 0.12 | - | - | - | 65.0 | - | - | - | 32.0 | - | - | 1.5 | Mn 1.0 |
Monel 401 | 0.10 | - | - | - | 43.0 | - | - | - | 53.0 | - | - | 0.75 | Si 0.25; Mn 2.25 |
Monel 404 | 0.15 | - | 52.0-57.0 | - | - | 0.05 | rest/bal | - | - | 0.50 | Mn 0.10; Si 0.10;S o.024 | ||
Monel 502 | 0.10 | - | - | - | 63.0-17.0 | - | - | 2.5-3.5 | rest/bal | - | 0.50 | 2.0 | Mn 1.5;Si 0.5; S 0.010 |
Monel K 500 | 0.13 | - | - | - | 64.0 | - | - | 2.8 | 30.0 | - | 0.6 | 1.0 | Mn 0.8 |
Monel R 405 | 0.15 | - | - | - | 66.0 | - | - | - | 31.0 | - | - | 1.2 | Mn 1.0; S 0.04 |
CNC Machining Monel Square Bolt Fastener | Philippines, Dammam -KSA, Belgium, Indonesia |
7.8X20.8 Monel Square Head Fasteners Connecting T Slot Bolt | Europe, Qatar, Thailand, France |
monel M24 x1.5 Hex bolt & nut | Thailand, Czechia, Malaysia, Germany |
Exotic Alloy Monel K500 Fastener | Bangladesh, Malaysia, Finland, USA |
Monel High Strength Thread Stud Bolt | Kuwait, South Africa, Brazil, Saudi Arabia (KSA) |
M10 M16 Monel Wing Screw | Singapore, Bahrain, Singapore, South Africa |
ISO 15979 Diameter 8mm Metal Steel Solid Monel Rivets | UK, Philippines, Nigeria, Australia |
Monel High Strength Hex Bolt | Hong Kong, Oman, UAE, Malaysia |
monel m36*210 nuts and bolts | Iran, Chile, Singapore, Italy |
monel din7045 m1.6*3mm pan head torx bolt | Norway, United Arab Emirates (UAE), Malaysia, Turkey |
DIN975 Monel Stud Bolt with Nut Washer | Russia, Netherlands, Dubai, Malaysia |
M6 M14 Monel Thumb Screw | Mexico, Egypt, UK, Spain |
M24 X 80 Monel BS 3076 Hex Socket Cap Screw DIN 912 | Malaysia, United Kingdom -UK, UAE, Europe |
Monel K500 2.4375 N05500 DIN931 Half Thread Hex Bolt | Poland, UK, Ellington -United States, Canada |
DIN912 Monel K500 M5X30 Hex Socket Cap Head Screw Bolts | Canada, Philippines, Singapore, Malaysia |
DIN976 Stainless Steel Monel Threaded Bolts, Stud Bolt | Romania, Europe, Malaysia, Japan |
Monel Stainless Steel Knurled Screw | Malaysia, Sweden, China, Colombia |
Tensile strength, Ultimate | 550 Mpa |
Tensile strength, Yield | 240 Mpa |
Elongation at Break | 48% |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Monel K500 | 2.4375 | N05500 | – | – | – | – | – |