ASTM F467 UNS N06625 Nuts
ASME SF467m Grade 5 Nut Suppliers in custom sizes
Fasteners produced under F467 grade alloys are considered to be non-ferrous. The ASTM F467m nuts are made up of copper and nickel alloys. Due to the usage of this alloy, these nuts provide high ductility, malleability, thermal and electrical conductivity.
Nominal threading diameters are included in ASTM F467 Hex Nuts specifications. They are available in the diameter ranging between M6 to M36. Furthermore, other specifications covered by this grade include workmanship of the product, finishes given to the product, dimensions, and various methods of testing used in the final product.
The mechanical properties displayed by ASTM F467 Grade 5 Nuts include high tensile strength, high proof load, and stress, along with excellent hardness. These can be modified as per requirement.
For general application industries typically use ASTM F467 Square Nuts. They display the ability to resist stress-related corrosion and cracking along with intergranular corrosion. Therefore it is common to see ASTM f467 nuts in pulp and paper, seawater equipment, acid processing, oil refineries, and gas scrubbing industries.
The material used in the production of ASTM F467 Thin Nuts helps in determining the properties of it. For instance, if an alloy like brass is used to make these bolts then they will display material yield resistance in seawater and will be apt for Marine engineering. Whereas, if the bolt is made up of aluminum it will be light in weight and will have a low density.
In case our customers have any confusion or doubts with regards to ASTM F467 Wing Nuts our expert team is available to understand their concerns and resolve their doubts. We understand the industry requirements and then provide the solution according to the best-suited product.
ASTM F467 UNS N06625 Nuts
ASME SF 467m Grade 5 Hex Nuts
ASTM F467 Metric Nuts
Manufacturer of ASTM F467 Hex Nuts in india, Check sizes & updated price list of F467 Wing Nuts
Table of Content
- Specification List of ASTM F467 UNS N06625 Nuts
- Check Price of ASTM F467 Metric Nuts
- Chemical Structure of ASTM F467 Hex Nuts
- Mechanical Analysis of F467 Nyloc Nuts
- Material Equivalent of F467 UNS N06625 Nuts
- ASTM F467 Tensile Stress Area
- Dimensions Table Of ASME SF467 Heavy Hex Nut
- Size Chart of F467 Nuts
| Standard | DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards |
|---|---|
| Size | M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160 |
| Length | 3 mm to 200 mm |
| Studs Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard: | ANSI - American National Standards Institute
DIN: 931, 933, 934, 970 UTS - Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO - International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
| Bolts In Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
| Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Thread | Metric Coarse |
| Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
| finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
| Production process | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
| Bolts types | Hex Bolts, Flange Bolts, Hex Head Bolts, Lag Bolts, Square Bolts, Eye Bolts, U Bolts, T Bolts, Counter sunk Bolts etc. |
| Nut types | Hex Head Nut, Eye Nut, Dome Nut, Wing Nut, T Nut, Panel Nut, Lock Nut, Coupling Nut, Square Nut, Acorn Nut etc. |
| Screws types | Hex Head Cap Screws, Socket Set Screws, Anchor Screws, Blind Rivet, Socket Head Screws, Concrete Screws, Shoulder Screws, Panel Screws, Threaded Screws, Machine Screws etc. |
| Washers Types | Machine Washers, Flat Washer, Star Washers, Sealing Washer, Lock Washer, Split Washer |
| Packing: | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Description | Per Unit (INR) | Price in USD | Price in EURO |
|---|---|---|---|
| Heavy Hex Nut 1/2 - 13unc B18.2.2 - Inconel 625 Threaded Nuts | 147 | 2.00 | 1.64 |
| Hex Bolt Ft 1/2 - 13unc X 60mm B18.2.1- Inconel 625 Other Screws And Bolts W/nwith Their Nuts Or Washers Threaded | 401 | 5.45 | 4.48 |
| Hex Bolt Ft 1/2 - 13unc X 60mm B18.2.1- Inconel 625 Other Screws And Bolts W/nwith Their Nuts Or Washers Threaded | 321 | 4.36 | 3.58 |
Specialized in ASTM F467 Thin Nuts, Check SF467m Square Nuts size chart
| Composition, %, Nickel and Nickel Base Alloys | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UNS Designation | Alloy | General Name | Aluminum | Carbon, max | Chromium | CopperA | Iron, max | Manganese, max | NickelA | Phosphorus, max | Silicon, max | Titanium | Cobalt, max | Molybdenum | Sulfur, max | Vanadium | Tungsten |
| N06625 | 625C | Ni-Cr-No-Cb | 0.40 max | 0.010 max | 20.0 - 23.0 | -- | 5.00 | 0.50 | 58.0 min | 0.040 | 0.50 | 0.40 max | 1.00 | 8.0 - 10.0 | 0.015 | -- | 3.2 - 4.2 |
| Alloy | Mechanical Property Marking | Nominal Thread Diameter, inch | HardnessA | Proof Stress, min, ksi |
|---|---|---|---|---|
| Inconel 625 | ||||
| Ni 625 | F 467AC | all | 85 HRB - 35 HRC | 60 |
Find your choice of sizes from our ASTM F467 Coupling/Lock/Dome Nuts stock
Alloy Group |
Alloy Designation |
Alloy Type |
|---|---|---|
1 |
303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se |
Austenitic |
2 |
316, 316L |
Austenitic |
3 |
321, 347 |
Austenitic |
4 |
430, 430F |
Ferritic |
5 |
410, 416, 416Se |
Martensitic |
6 |
431 |
Martensitic |
7 |
630 (17-4) |
Precipitation Hardening |
| Nominal Size, inch. | Coarse Threads – UNC | Fine Threads – UNF | 8 Thread Series – 8UN | |||
|---|---|---|---|---|---|---|
| Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | Threads / inch | Stress AreaA, in2 | |
| 1/4 | 20 | 0.0318 | 28 | 0.0364 | — | — |
| 5/16 | 18 | 0.0524 | 24 | 0.0580 | — | — |
| 3/18 | 16 | 0.0775 | 24 | 0.0878 | — | — |
| 7/16 | 14 | 0.1063 | 20 | 0.1187 | ||
| 1/2 | 13 | 0.1419 | 20 | 0.1599 | ||
| 9/16 | 12 | 0.1820 | 18 | 0.2030 | ||
| 5/8 | 11 | 0.2260 | 18 | 0.2560 | ||
| 3/4 | 10 | 0.3340 | 16 | 0.3730 | ||
| 7/8 | 9 | 0.4620 | 14 | 0.5090 | ||
| 1 | 8 | 0.6060 | 12 | 0.6630 | ||
| 1 1/8 | 7 | 0.7630 | 12 | 0.8560 | 8 | 0.790 |
| 1 1/4 | 7 | 0.9690 | 12 | 1.0730 | 8 | 1.000 |
| 1 3/8 | 6 | 1.1550 | 12 | 1.3150 | 8 | 1.233 |
| 1 1/2 | 6 | 1.4050 | 12 | 1.5810 | 8 | 1.492 |
Nominal Size or Basic Major Thread Diameter |
F |
G |
H |
||||||
Width, Across Flats |
Width, Across Corners |
Thickness |
|||||||
Basic |
Max |
Min |
Max |
Min |
Basic |
Max |
Min |
||
1/4 |
.2500 |
7/16 |
.438 |
.428 |
.505 |
.488 |
7/32 |
.226 |
.212 |
5/16 |
.3125 |
1/2 |
.500 |
.489 |
.577 |
.557 |
17/64 |
.273 |
.258 |
3/8 |
.3750 |
9/16 |
.562 |
.551 |
.650 |
.628 |
21/64 |
.337 |
.479 |
7/16 |
.4375 |
11/16 |
.688 |
.675 |
.794 |
.768 |
3/8 |
.385 |
.365 |
1/2 |
.5000 |
3/4 |
.750 |
.736 |
.866 |
.840 |
7/16 |
.448 |
.427 |
9/16 |
.5625 |
7/8 |
.875 |
.861 |
1.010 |
.982 |
31/64 |
.496 |
.473 |
5/8 |
.6250 |
15/16 |
.938 |
.922 |
1.083 |
1.051 |
35/64 |
.559 |
.535 |
3/4 |
.7500 |
1-1/8 |
1.125 |
1.088 |
1.299 |
1.240 |
41/64 |
.665 |
.617 |
7/8 |
.8750 |
1-5/16 |
1.312 |
1.269 |
1.516 |
1.447 |
3/4 |
.776 |
.724 |
1 |
1.0000 |
1-1/2 |
1.500 |
1.450 |
1.732 |
1.653 |
55/64 |
.887 |
.831 |
1-1/8 |
1.1250 |
1-11/16 |
1.688 |
1.631 |
1.949 |
1.859 |
31/32 |
.999 |
.939 |
1-3/8 |
1.3750 |
2-1/16 |
2.062 |
1.994 |
2.382 |
2.273 |
1-11/64 |
1.206 |
1.138 |
1-1/2 |
1.500 |
2-1/4 |
2.250 |
2.175 |
2.598 |
2.480 |
1-9/32 |
1.ASTM A194 GR. 8 |
1.245 |
1-5/8 |
1.6250 |
2-7/16 |
2.438 |
2.356 |
2.815 |
2.686 |
1-25/64 |
1.429 |
1.353 |
1-3/4 |
1.7500 |
2-5/8 |
2.625 |
2.538 |
3.031 |
2.893 |
1-1/2 |
1.540 |
1.460 |
2 |
2.0000 |
3 |
3.000 |
2.900 |
3.464 |
3.306 |
1-23/32 |
1.763 |
1.675 |
2-1/4 |
2.2500 |
3-3/8 |
3.375 |
3.263 |
3.897 |
3.719 |
1-15/16 |
1.986 |
1.890 |
2-1/2 |
2.5000 |
3-3/4 |
3.750 |
3.625 |
4.330 |
4.133 |
2-5/32 |
2.209 |
2.105 |
2-3/4 |
2.7500 |
4-1/8 |
4.125 |
3.988 |
4.763 |
4.546 |
2-3/8 |
2.431 |
2.319 |
Get complete information about ASTM F467 Metric Nuts and Nyloc Nuts Composition, Equivalent, specification chart online
| NOM., DIA. | PITCH, mm | DIAMETER, mm | DIAMETER, inch | NUT, Size |
|---|---|---|---|---|
| M10 | 1.5 | 10 | 0.3937 | 17 |
| M12 | 1.75 | 12 | 0.4724 | 19 |
| M14 | 2 | 14 | 0.5512 | 22 |
| M16 | 2 | 16 | 0.6299 | 24 |
| M18 | 2.5 | 18 | 0.7087 | 27 |
| M20 | 2.5 | 20 | 0.7874 | 30 |
| M22 | 2.5 | 22 | 0.8661 | 32 |
| M24 | 3 | 24 | 0.9449 | 36 |
| M27 | 3 | 27 | 1.063 | 41 |
| M30 | 3.5 | 30 | 1.1811 | 46 |
| M33 | 3.5 | 33 | 1.2992 | 50 |
| M36 | 4 | 36 | 1.4173 | 55 |
| M39 | 4 | 39 | 1.5354 | 60 |
| M42 | 4.5 | 42 | 1.6535 | 65 |
| M45 | 4.5 | 45 | 1.7717 | 70 |
| M48 | 5 | 48 | 1.8898 | 75 |
| M52 | 5 | 52 | 2.0472 | 80 |
| M56 | 5.5 | 56 | 2.2047 | 85 |
| M60 | 5.5 | 60 | 2.3622 | 90 |
| M64 | 6 | 64 | 2.5197 | 95 |
| M68 | 6 | 68 | 2.6772 | 100 |
| M72 | 6 | 72 | 2.8346 | 105 |
| M76 | 6 | 76 | 2.9921 | 110 |
| M80 | 6 | 80 | 3.1496 | 115 |
| M85 | 6 | 85 | 3.3464 | 120 |
| M90 | 6 | 90 | 3.5433 | 130 |
| M100 | 6 | 100 | 3.937 | 145 |
| M110 | 6 | 110 | 4.3307 | 155 |
| M125 | 6 | 125 | 4.9212 | 180 |
| M140 | 6 | 140 | 5.5118 | 200 |
| M160 | 6 | 160 | 6.2992 | 230 |