Hastelloy is a nickel-molybdenum alloy and provides resistance to highly oxidizing and reducing agents. It is mostly used in aerospace and chemical processing. Hastelloy C22 Round Bar uses a molybdenum element which at high temperature makes the alloy hard. It has a minimum tensile strength of 765 MPa and a Yield strength of 359 MPa. It is known as Alloy C22 Hex Bar. It is resistant to acid chlorides, seawater, brine solutions and has good weldability, thus useful in the chemical processing industries. Other variants such as C22 Hastelloy Square Bar have tensile strength of 115 ksi and 60% elongation in the annealed state. However, it should not be used above 1250 Fahrenheit as it may develop cracks.
ASTM B574 UNS N06022 Bar is cold-formed because of its ductility as it is generally harder than austenitic steels. However, it still requires annealing between ranges of 2020-2150 Fahrenheit. Forging can also be done on this between temperature ranges of 1750 to 2050 Fahrenheit. It is suitable for industrial gas turbines and petrochemical industries as it has good resistance to oxidizing and reducing agents. Its Werkstoff equivalent DIN 2.4602 Flat Bar has a moderate density of 8.69 g/cm3 and a high melting point of 1325 to 1370 degrees celsius. Its tensile strength of minimum of 690 N/mm2 at room temperature and hardness of 240 HB which is suitable for the paper and pulp industry.
Hastelloy C22 Rod is a part of UNS N06022 industry standardized superalloys. It has a minimum tensile strength of 100 Ksi and a yield strength of 45 Ksi.
Element | Melting Point | Tensile Strength | Density | Yield Strength (0.2%Offset) | Elongation |
Hastelloy C22 Round Bar | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | 8.89 g/cm3 | Psi – 52,000 , MPa – 355 | 40 % |
Specification Of: | Hastelloy C22 Round Bar |
---|---|
Grade And UNS Number | AMS 5665 And ASTM B166/ UNS N06022 |
Size Of Rectangles | 33 x 30 millimeter to 295 x 1066 millimeter |
Bars Standard | ASTM/ASME B166 And AMS 5513, AMS 5647 Or AMS 5511 |
Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
Size Chart | Round Bars (Diameter 3-~800 Millimeter), HexBars (2-100mm (Millimeter) A/F), Flat Bars (2 -100mm (Millimeter), Square bars (4 to 100 Millimeter), Angle Bars (3*20*20~12*100*100 In MM)) |
Type Of Nickel Alloy C22 Bars | Round Bars/ HexBars/ Flat Bars/ Square bars/ Angle Bars/ Channel Bars |
Surface Area | Cold Drawn/ Polished And Hairline/ Bright |
Technique Use To Making Bars | Cold Rolled/ Forged Round Bars/ Cold Drawn/ Rod/ Hot Rolled |
Cutting Processing | Bars Cutting To 650 millimeter |
Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
Outside Diameter Of Hollow Bars | 32 Outside Diameter x 16 Inside Diameter to 250 Outside Diameter x 200 Inside Diameter In MM) |
Type Of Finish | Smooth Turned/ Cold (bright)/ Drawn Hot Rolled/ Centreless Ground |
Largest Independent Stockholder Of ASTM B574 UNS N06022 Flat Bar | Vapi, Sharjah, Melbourne, Batam, Oyama, New-Delhi, Madrid, Lucknow, Al-Jubail, Seoul, Mexico-City, Mysuru, Shah-Alam, Coimbatore, Ludhiana, Karachi, Sao-Paulo, Doha, Ahmedabad, Faridabad, Hyderabad, Pune, Lagos, Shanghai, Gurgaon, Dombivli, Dammam, Quezon-City, Houston, Noida, Jamshedpur, Baku, Calgary, Jeddah, Vasai-Virar, Singapore, Hazira, Nashik, Indore, Visakhapatnam, Bangkok, Paris, Istanbul, Johor-Bahru, Kuala-Lumpur, Dubai, Busan, Tiruchirappalli, Tehran, Guwahati, Ho-Chi-Minh-City, Kalyan, Hangzhou, Chennai, Dallas, Ashburn, Bhubaneswar, Kochi, Mumbai, Puchong, Rajkot, Jakarta, Cairo, Brisbane, Abu-Dhabi, Raipur, Beijing, Surabaya, Delhi, Agra, Bengaluru, Bogota, Secunderabad, Vung-Tau, Perth, Thane, Chandigarh, Milan, Chicago, Alexandria, Jaipur, Ambernath, Bhopal, Surat, Amsterdam, Kolkata, Panipat, Vadodara, London, Riyadh, Al-Khobar, Patna, Sydney, Santiago, Ghaziabad, Navi-Mumbai, Pimpri-Chinchwad, Manama, Hanoi, Nagpur, Ajman, Dhaka, Jamnagar, Kota, Zhengzhou, Ankleshwar, |
STANDARD | WERKSTOFF NR. | JIS | EN | UNS |
---|---|---|---|---|
Hastelloy C22 Round Bar | 2.4602 | NW 6022 | NiCr21Mo14W | N06022 |
Hastelloy C22 Round Bar Chemical Composition, % | |
---|---|
Manganese | ≤0.5 |
Silicon | ≤0.08 |
Chromium | 22 |
Vanadium | ≤0.35 |
Iron | 3 |
Carbon | ≤0.01 |
Copper | ≤0.5 |
Nickel | Balance |
Cobalt | ≤2.5 |
Tungsten | 3 |
Molybdenum | 13 |
Electrical Resistivity | Specific Heat | Density | Melting Range | ||||
---|---|---|---|---|---|---|---|
µohm.in | µohm.m | Btu/lb.°F | J/kg*°C | lb/in3 | g/cm3 | °F | °C |
44.9 | 1.14 | 0.098 | 414 | 0.314 | 8.69 | 2475-2550 | 1357-1399 |
Size | Grade | Price In INR Per Unit |
---|---|---|
Size :50mm Diameter X 500 Mm | Hastelloy C22 | 764.00 |
Size :60mm Diameter X 400 Mm | Hastelloy C22 | 985.00 |
Size :80mm Diameter X 600 Mm | Hastelloy C22 | 1370.00 |
Size :100mm Diameter X 800 Mm | Hastelloy C22 | 1827.00 |
Buy Hastelloy C22 Round Bar With Best Price & Fast Delivery in India. For final ASTM B574 Hastelloy C22 Rod Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.
Cold drawn | CD | Polished | P |
Bright drawn | BD | Slit rolled edge | SRE |
Centreless ground | CG | Hot finished | HF |
Cold finished | CF | Hot rolled annealed and pickled | HRAP |
Peeled and turned | P And T | Rough turned/peeled | RT |
Smooth turned | ST | Peeled and reeled | PR |
Hardened and tempered | H And T |
Annealed | ANN |
Precipitation hardened | PH |
Hastelloy C22 Round Barr Dimensions | |||||||
---|---|---|---|---|---|---|---|
Size Of Metric | US Bars Standard | Canadian Standard | Japanese Standard | ||||
Size Of Bars | Diameter In (millimeter) | Bars Size | Diameter In (Inches) | Bars Size | Diameter In (millimeter2) | Bars Size | Diameter In (millimeter) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.600 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.600 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Type Of Bar | Size In Millimeter | Size In Inches | Tolerance In ISO |
---|---|---|---|
Cold Drawn ; Polish Round Bars | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
Cold Drawn ; Ground Bars | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
Peeled ; Polished Round Bars | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
Peeled ; Ground Bars | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
Square Bar Tolerances | ||
---|---|---|
Shape And Section | Diameter And Size & width Across Flat | Permitted variation |
millimeter | millimeter | |
Round | ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 | + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140 |
Flats (thick.) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.250, + 0 to - 0.350 |
Flats Bars (width Of Bars) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.190, + 0 to - 0.220, + 0 to - 0.350, + 0 to - 1.00, + 1.00 to - 1.00 |
Square Bars and, hexagon Bar | ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 | + 0 to - 0.090, + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.250 |
|
|
Hastelloy C22 Round Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Size In Millimeter | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr |
3millimeter | 0.017 | 0.055 | 20millimeter | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
1/8" | 0.019 | 0.062 | 22millimeter | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
4millimeter | 0.030 | 0.098 | 24millimeter | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
3/16" | 0.043 | 0.141 | 25millimeter | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
5millimeter | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
7/32" | 0.058 | 0.190 | 26millimeter | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
6millimeter | 0.068 | 0.223 | 27millimeter | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
7millimeter | 0.091 | 0.298 | 30millimeter | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
8millimeter | 0.120 | 0.398 | 32millimeter | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
9millimeter | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
3/8" | 0.170 | 0.557 | 35millimeter | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
10millimeter | 0.189 | 0.620 | 36millimeter | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
11millimeter | 0.228 | 0.748 | 38millimeter | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
12millimeter | 0.271 | 0.889 | 40millimeter | 3.009 | 9.872 | |||
1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
13millimeter | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
14millimeter | 0.368 | 1.207 | 45millimeter | 3.807 | 12.555 | |||
9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
15millimeter | 0.424 | 1.391 | 48millimeter | 4.330 | 14.205 | |||
5/8" | 0.473 | 1.551 | 50millimeter | 4.698 | 15.414 | |||
16millimeter | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
17millimeter | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
18millimeter | 0.610 | 2.001 | 60millimeter | 6.768 | 22.205 | |||
3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
2-1/2" | 7.576 | 24.856 | ||||||
2-5/8" | 8.354 | 27.409 | ||||||
2-3/4" | 9.169 | 30.083 |
ASTM B574 UNS N06022 Flat Bar | Poland, Canada, UK, Ellington -United States |
Alloy C22 Hex Bars | Philippines, Singapore, Canada, Malaysia |
C22 Hastelloy Square Bars | Europe, Malaysia, Japan, Romania |
ASTM B574 UNS N06022 Bars | Malaysia, Colombia, Sweden, China |
DIN 2.4602 Flat Bars | Malaysia, United Kingdom -UK, Europe, UAE |
Hastelloy C22 Rod | Philippines, Indonesia, Dammam -KSA, Belgium. |
ASME SB 574 DIN 2.4602 Square Bars | Bahrain, Singapore, South Africa |
Hastelloy UNS N06022 Bright Bars | Australia, Nigeria, Philippines, UK |
ASTM B574 Hastelloy C22 Bars | Hong Kong, Malaysia, Oman, UAE |
C22 Hastelloy Rod | Iran, Italy, Chile, Singapore |
Alloy C22 Hastelloy Annealed Bars | Qatar, Europe, Thailand, France. |
2.4602 Hastelloy C22 Polished Bars | Germany, Czechia, Malaysia, Thailand |
ASTM B574 C22 Hastelloy Black Bars | Bangladesh, Malaysia, Finland, USA |
UNS N06022 Hastelloy Cold Drawn Bars | South Africa, Brazil, Saudi Arabia (KSA), Kuwait |
C22 Alloy Hot Rolled Bars | Norway, Turkey, Malaysia, United Arab Emirates (UAE) |