Incoloy 800 Flanges

ASTM B564 UNS N08810 Blind And Slip On Flange Manufacturer In India.


Incoloy 800 Flanges (B564 N08810 Blind Flanges) are employable in heat-treating equipment, chemical and petrochemical processing. Alloy 800 Flanges are Non-magnetic and have high strength & good weldability. Before you buy B564 UNS N08810 Slip On Flanges in India or UK, compare Alloy 800H Flanges, Alloy 800H Flanges and Incoloy 800HT Flanges compositions, specs and price. We stock from SB 564 UNS N08810 Lap Joint Flanges, through SB 564 N08810 Weld Neck Flanges,. 1.4876 Incoloy 800 Flange. The Incoloy 1.4876 Flange material invented by Special Metals Corporation Group of Companies. UNS N08810 Flange are suitable under extremely corrosive environments in power, chemical, and petrochemical industries.

Incoloy 800 Flanges
Incoloy 800 Flanges
Alloy 800 Blind Flanges
Alloy 800 Blind Flanges
UNS N08810 Slip On Flanges
UNS N08810 Slip On Flanges


incoloy 800 flanges manufacturer


incoloy 800 flanges supplier in india



Incoloy 800 Blind Flanges Equivalent

STANDARD WERKSTOFF NR. AFNOR EN OR UNS JIS BS GOST
Incoloy 800 Flanges 1.4876 Z8NC32-21 X10NiCrAlTi32-20 XH32T N08800 NCF 800 NA 15 ЭИ670
Incoloy 800H Flanges 1.4958 / 1.4876 Z8NC33-21 X5NiCrAlTi31-20 XH32T N08810 NCF 800H NA 15(H) ЭИ670
Incoloy 800HT Flanges 1.4859 / 1.4876 X8NiCrAlTi32-21 XH32T N08811 NCF 800HT NA 15(HT) ЭИ670

Chemical Compatibility Of Alloy 800 Slip On Flange

Incoloy 800 Flanges Chemical Composition, %
S ≤0.015
Fe ≥39.5
Cu ≤0.75
C ≤0.10
Mn ≤1.50
Si ≤1.00
Ni 30.0-35.0
Al 0.15-0.60
Cr 19.0-23.0
Ti 0.15-0.60

Mechanical Chart Of ASTM B564 Incoloy 800H Flanges

Element Yield Strength (0.2%Offset) Elongation Density Melting Point Tensile Strength
Incoloy 800/ 800H/ 800HT Flanges Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 7.94 g/cm3 1385 °C (2525 °F) 30 %

Incoloy 800 Weld Neck Flanges Physical Properties

Density Of Incoloy 800 Flanges Melting Range Specific Heat Electrical Resistivity
g/cm3 °C °F J/kg. k Btu/lb.°F µΩ·m
7.94 1357-1385 2475-2525 460 0.110 989

Pressure Rating Of UNS N08810 Flanges

Temperature °C 150 LBS 300 LBS 400 LBS 600 LBS 900 LBS 1500 LBS 2500 LBS
-29~38 15.9 41.4 55.2 82.7 124.1 206.8 344.7
50 15.4 40.2 53.7 80.5 120.7 201.2 335.3
100 13.8 35.9 47.9 71.9 107.8 179.7 299.5
150 12.9 33.7 45.0 67.5 101.2 168.7 281.1
200 12.5 32.7 43.6 65.4 98.1 163.5 272.4
250 12.1 32.6 43.5 65.2 97.8 163.0 271.7
300 10.2 32.6 43.5 65.2 97.8 163.0 271.7
325 9.3 32.6 43.5 65.2 97.8 163.0 271.7
350 8.4 32.6 43.4 65.1 97.7 162.8 271.3
375 7.4 32.4 43.2 64.8 97.2 161.9 269.9
400 6.5 32.1 42.8 64.2 96.2 160.4 267.4
425 5.5 31.6 42.2 63.3 94.9 158.2 263.6
450 4.6 26.9 35.9 53.8 80.7 134.5 224.2
475 3.7 20.8 27.7 41.5 62.3 103.8 173.0

Torque Specs Of ASTM B564 Incoloy 800HT Flange

Size in Inches Size in Millmeter Max. Radial Projection of Imperfections that are
Serrations, No Deeper Than the Bottom, Millmeter Serrations, Deeper Than the Bottom, Millmeter
1/2 15 3.0 1.5
3/4 20 3.0 1.5
1 25 3.0 1.5
1 1/4 32 3.0 1.5
1 1/2 40 3.0 1.5
2 50 3.0 1.5
2 1/2 65 3.0 1.5
3 80 4.5 1.5
3 1/2 90 6.0 3.0
4 100 6.0 3.0
5 125 6.0 3.0
6 150 6.0 3.0
8 200 8.0 4.5
10 250 8.0 4.5
12 300 8.0 4.5
14 350 8.0 4.5
16 400 10.0 4.5
18 450 12.0 6.0
20 500 12.0 6.0
24 600 12.0 6.0

See Dimensions, Sizes And Weight Chart Of UNS N08811 Weld Neck Flange, Get Genuine Material With Tests Radiography/ Hardness/ Impact And Heat No.


Weight Chart Of Werkstoff Nr. 1.4876 Flange

Normal Pipe Sizes Dimensions Of Flanges Weight In Kilogram
Normal Pipe Size
(Inch)
DN (Millimeter) Flanges
Millimeter
Flanges
Thickness
Slip-on
Socket Weld (KG)
Weld Neck (KG) Blind (KG)
1/2 15 88.9 11.2 0.4 0.5 0.4
3/4 20 98.6 12.7 0.6 0.7 0.6
1 25 108 14.2 0.8 1 0.9
1 1/4 32 117.3 15.7 1 1.3 1.2
1 1/2 40 127 17.5 1.3 1.7 1.5
2 50 152.4 19.1 2.1 2.6 2.4
2 1/2 65 177.8 22.4 3.3 4.1 3.9
3 80 190.5 23.9 3.9 4.9 4.9
3 1/2 90 215.9 23.9 4.8 6.1 6.2
4 100 228.6 23.9 5.3 6.8 7.0
5 125 254 23.9 6.1 8.6 8.6
6 150 279.4 25.4 7.5 10.6 11.3
8 200 342.9 28.4 12.1 17.6 19.6
10 250 406.4 30.2 16.5 24 28.6
12 300 482.6 31.8 26.2 36.5 43.2
14 350 533.4 35.1 34.6 48.4 58.1
16 400 596.9 36.6 44.8 60.6 76.1
18 450 635 39.6 48.9 68.3 93.7
20 500 698.5 42.9 61.9 84.5 122.0
24 600 812.8 47.8 86.9 115 185.0

Look Our ASME SB564 Nickel Alloy 800 Socket Weld And Forged Flanges Price List For Europe And Middle East Asia


800H Alloy Pipe Flanges Gasket Material

Nominal Size Of Pipe (NPS)Gasket (I.D.) Inside Diameter

(Inches)
Gasket (O.D.) Outside Diameter
150 LBS 300 LBS 400 LBS 600 LBS 900 LBS
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

Size Chart Of JIS NCF 800 RTJ Flanges

Size in Inches Size in Millimeter Outer Diameter (O.D.) Flange Thickness Hub Outer Diameter Length Of Pipe Flange Diameter Of RF (Raised Face) Height Of RF (Raised Face) PCD Socket Bore Number of Bolt Bolts Sizes UNC Length Of Machine Bolts Length Of Raised Face (RF) Studs Size Of Bolt Hole Size Of ISO Studs Weight in kilogram
A B C D E F G H
1/2 15 90 9.6 30 14 34.9 2 60.3 22.2 4 1/2 50 55 5/8 M14 0.8
3/4 20 100 11.2 38 14 42.9 2 69.9 27.7 4 1/2 50 65 5/8 M14 0.9
1 25 110 12.7 49 16 50.8 2 79.4 34.5 4 1/2 55 65 5/8 M14 0.9
1 1/4 32 115 14.3 59 19 63.5 2 88.9 43.2 4 1/2 55 70 5/8 M14 1.4
1 1/2 40 125 15.9 65 21 73 2 98.4 49.5 4 1/2 65 70 5/8 M14 1.4
2 50 150 17.5 78 24 92.1 2 120.7 61.9 4 5/8 70 85 3/4 M16 2.3
2 1/2 65 180 20.7 90 27 104.8 2 139.7 74.6 4 5/8 75 90 3/4 M16 3.2
3 80 190 22.3 108 29 127 2 152.4 90.7 4 5/8 75 90 3/4 M16 3.7
3 1/2 90 215 22.3 122 30 139.7 2 177.8 103.4 8 5/8 75 90 3/4 M16 5
4 100 230 22.3 135 32 157.2 2 190.5 116.1 8 5/8 75 90 3/4 M16 5.9
5 125 255 22.3 164 35 185.7 2 215.9 143.8 8 3/4 85 95 7/8 M20 6.8
6 150 280 23.9 192 38 215.9 2 241.3 170.7 8 3/4 85 100 7/8 M20 8.6
8 200 345 27 246 43 269.9 2 298.5 221.5 8 3/4 90 110 7/8 M20 13.7
10 250 405 28.6 305 48 323.8 2 362 276.2 12 7/8 100 115 1 M24 19.5
12 300 485 30.2 365 54 381 2 431.8 327 12 7/8 100 120 1 M24 29
14 350 535 33.4 400 56 412.8 2 476.3 359.2 12 1 115 135 1 1/8 M27 41
16 400 595 35 457 62 469.9 2 539.8 410.5 16 1 115 135 1 1/8 M27 54
18 450 635 38.1 505 67 533.4 2 577.9 461.8 16 1 1/8 125 145 1 1/4 M30 59
20 500 700 41.3 559 71 584.2 2 635 513.1 20 1 1/8 140 160 1 1/4 M30 75
24 600 815 46.1 663 81 692.2 2 749.3 616 20 1 1/4 150 170 1 3/8 M33 100

Material Specification Of Nickel Alloy 800 Flanges

Material Specification Incoloy 800 Flanges
Incoloy 800 Blind Flanges Used In Oil And Gas Industry Pipeline Service And Join A Pipe With Other Equipment (Pump, Valve, Pipe And Tube) And (SORF/ WNRF/ SWRF/ BLRF)
Manufacturer Of Different Type ASME Standard ASME B16.47/ ASME B16.5/ ASME B16.36/ ASME B16.48
Top 5 Common Type Of Flanges Threaded/ Socket Weld/ Blind/ Lap Joint/ Slip-On/ Weld Neck Flanges
Maximum Pressure 150# To 2500#
Length Of: NPS (1/4 Inch) To NPS (24 Inch)
Standard Of Awwa C207/ DIN/ MSS/ ISO/ EN/ BS 10/ API/ PN
Facing Type Flat Face (FF)/ Raised Face (RF)/ Ring Type Joint (RTJ)

Buy DIN 1.4876 RTJ Flange Directly From India's Largest Supplier Of Nickel Alloy Flanges And Save Money

Incoloy alloy 800 Flange Stud Bolt Size Chart

Class 150 Flanges Class 300 Flanges Class 600 Flanges
Nominal Size Of Pipe (NPS) # Studs And Bolts Bolt And Stud Diameter Studs Length # Bolt And Stud Diameter of Bolt And Stud Studs Length # Bolt And Stud Diameter of Bolt And Stud Studs Length
1/16 RF (Raised Face) RTJ (Ring Type Joint) 1/16 RF (Raised Face) RTJ (Ring Type Joint) 1/4 RF (Raised Face) RTJ (Ring Type Joint)
1/2 4 0.50 2-1/4 4 0.50 2-1/2 3 4 0.50 3 3
3/4 4 0.50 2-1/2 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1 4 0.50 2-1/2 3 4 0.63 3 3-1/2 4 0.63 3-1/2 3-1/2
1-1/4 4 0.50 2-3/4 3-1/4 4 0.63 3-1/4 3-3/4 4 0.63 3-3/4 3-3/4
1-1/2 4 0.50 2-3/4 3-1/4 4 0.75 3-1/2 4 4 0.75 4-1/4 4-1/4
2 4 0.63 3-1/4 3-3/4 8 0.63 3-1/2 4 8 0.63 4-1/4 4-1/4
2-1/2 4 0.63 3-1/2 4 8 0.75 4 4-1/2 8 0.75 4-3/4 4-3/4
3 4 0.63 3-1/2 4 8 0.75 4-1/4 4-3/4 8 0.75 5 5
3-1/2 8 0.63 3-1/2 4 8 0.75 4-1/4 5 8 0.88 5-1/2 5-1/2
4 8 0.63 3-1/2 4 8 0.75 4-1/2 5 8 0.88 5-3/4 5-3/4
5 8 0.75 3-3/4 4-1/4 8 0.75 4-3/4 5-1/4 8 1.00 6-1/2 6-1/2
6 8 0.75 4 4-1/2 12 0.75 4-3/4 5-1/2 12 1.00 6-3/4 6-3/4
8 8 0.75 4-1/4 4-3/4 12 0.88 5-1/2 6 12 1.13 7-1/2 7-3/4
10 12 0.88 4-1/2 5 16 1.00 6-1/4 6-3/4 16 1.25 8-1/2 8-1/2
12 12 0.88 4-3/4 5-1/4 16 1.13 6-3/4 7-1/4 20 1.25 8-3/4 8-3/4
14 12 1.00 5-1/4 5-3/4 20 1.13 7 7-1/2 20 1.38 9-1/4 9-1/4
16 16 1.00 5-1/4 5-3/4 20 1.25 7-1/2 8 20 1.50 10 10
18 16 1.13 5-3/4 6-1/4 24 1.25 7-3/4 8-1/4 20 1.63 10-3/4 10-3/4
20 20 1.13 6-1/4 6-3/4 24 1.25 8 8-3/4 24 1.63 11-1/4 11-1/2
24 20 1.25 6-3/4 7-1/4 24 1.50 9 10 24 1.88 13 13-1/4

Online Inventory Of Class 150 DIN 1.4958 WNRF To CL 300 DIN 1.4859 SWRF Flange In All International Standards Confirming To ASME/ ANSI B16.5

ASTM B564 Incoloy Alloy 800 Flanges Dimensions Class 150

ASTM B564 Incoloy Alloy 800 Flanges Dimensions Class 150
Normal Pipe Size Outer Daimeter of Flanges Thickness of Flanges Daimeter of (RF) Raised Face Daimeter of Hub At Base Lengtd Tdru Hub Daimeter And Bore Daimeter of Hub at Bevel Fillet Radius Socket Deptd
Weld Neck (WN) Flanges Slip On And Threaded/ Socket Weld Flanges Lap Joint Flanges Slip-on (SORF) And Socket Weld Flanges Lap Joint (Loose) Flanges
O Q R X Y Y Y W B H r Z
1/2 3-1/2 7/16 1-3/8 1-3/16 1-7/8 5/8 5/8 .88 .90 .84 1/8 3/8
3/4 3-7/8 1/2 1-11/16 1-1/2 2-1/16 5/8 5/8 1.09 1.11 1.05 1/8 7/16
1 4-1/4 9/16 2 1-15/16 2-3/16 11/16 11/16 1.36 1.38 1.32 1/8 1/2
1-1/4 4-5/8 5/8 2-1/2 2-5/16 2-1/4 13/16 13/16 1.70 1.72 1.66 3/16 9/16
1-1/2 5 11/16 2-7/8 2-9/16 2-7/16 7/8 7/8 1.95 1.97 1.90 1/4 5/8
2 6 3/4 3-5/8 3-1/16 2-1/2 1 1 2.44 2.46 2.38 5/16 11/16
2-1/2 7 7/8 4-1/8 3-9/16 2-3/4 1-1/8 1-1/8 2.94 2.97 2.88 5/16 3/4
3 7-1/2 15/16 5 4-1/4 2-3/4 1-3/16 1-3/16 3.57 3.60 3.50 3/8 13/16
3-1/2 8-1/2 15/16 5-1/2 4-13/16 2-13/16 1-1/4 1-1/4 4.07 4.10 4.00 3/8 7/8
4 9 15/16 6-3/16 5-5/16 3 1-5/16 1-5/16 4.57 4.60 4.50 7/16 15/16
5 10 15/16 7.5/16 6-7/16 3-1/2 1-7/16 1-7/16 5.66 5.69 5.56 7/16 15/16
6 11 1 8-1/2 7-9/16 3-1/2 1-9/16 1-9/16 6.72 6.75 6.63 1/2 1-1/16
8 13-1/2 1-1/8 10-5/8 9-11/16 4 1-3/4 1-3/4 8.72 8.75 8.63 1/2 1-1/4
10 16 1-3/16 12-3/4 12 4 1-15/16 1-15/16 10.88 10.92 10.75 1/2 1-5/16
12 19 1-1/4 15 14-3/8 4-1/2 2-3/16 2-3/16 12.88 12.92 12.75 1/2 1-9/16
14 21 1-3/8 16-1/4 15-3/4 5 2-1/4 3-1/8 14.14 14.18 14.00 1/2 1-5/8
16 23-1/2 1-7/16 18-1/2 18 5 2-1/2 3-7/16 16.16 16.19 16.00 1/2 1-3/4
18 25 1-9/16 21 19-7/8 5-1/2 2-11/16 3-13/16 18.18 18.20 18.00 1/2 1-15/16
20 27-1/2 1-11/16 23 22 5-11/16 2-7/8 4-1/16 20.20 20.25 20.00 1/2 2-1/8
24 32 1-7/8 27-1/4 26-1/8 6 3-1/4 4-3/8 24.25 24.25 24.00 1/2 2-1/2

Incoloy 800/800H/800HT Flanges Dimensions Class 300

Incoloy 800/800H/800HT Flanges Dimensions Class 300
Normal Pipe Size (NPS) Outside
Diameter of Flanges (O.D.)
Flanges Thickness (Minimum) Overall Length Circle Of Bolts Number And
Size of
Holes
Outside Diameter Of
Raised Face (RF)
Welding
neck flanges
Slip-on flanges
& socket
welding flanges
Lap Joint flanges
O Q Y Diameter Number Diameter R
1/2 95 14.3 52.4 22.2 22.2 666.5 4 15 35
3/4 117 15.9 57.2 25.4 25.4 82.4 4 19 43
1 124 17.5 61.9 27.0 27.0 89.0 4 19 51
1-1/4 133 19.1 65.1 27.0 27.0 98.5 4 19 64
1-1/2 156 20.7 68.3 30.2 30.2 114.5 4 22 73
2 165 22.3 69.8 33.3 33.3 127.0 8 19 92
2-1/2 190 25.4 76.2 38.1 38.1 149.0 8 22 105
3 210 28.6 79.4 42.9 42.9 168.0 8 22 127
4 254 318 85.7 47.6 47.6 200.0 8 22 157
5 279 35.0 98.4 50.8 50.8 235.0 8 22 186
6 313 36.6 98.4 52.4 52.4 270.0 12 22 216
6 381 413 111.1 61.9 91.9 330.0 12 25 270
10 444 47.7 117.5 66.7 95.3 387.5 16 29 324
12 521 50.8 130.2 73.0 101.6 451.0 16 32 381
14 584 54.0 142.9 76.2 111.1 514.5 20 32 413
16 648 57.2 146.0 82.6 120.7 571.5 20 35 470
18 711 60.4 158.8 88.9 130.2 628.5 24 35 533
20 775 63.5 161.9 95.2 139.7 686.0 24 35 584
24 914 69.9 168.3 106.4 152.4 843.0 24 41 692

Incoloy 800 Socket Weld Flanges Thickness Chart In MM

Wll Thickness Of Incoloy 800 Flanges
NPS Outside Daimeter (O.D.) Sch/ Schedule 10 Sch/ Schedule 20 Sch/ Schedule 30 STD Wall Sch/ Schedule 40 Sch/ Schedule 60 EXT Hvy Sch/ Schedule 80 Sch/ Schedule 100 Sch/ Schedule 120 Sch/ Schedule 140 Sch/ Schedule 160 XX Hvy
½ 0.84 0.083 0.109 0.109 0.147 0.147 0.188 0.294
¾ 1.05 0.083 0.113 0.113 0.154 0.154 0.219 0.308
1 1.315 0.109 0.133 0.133 0.179 0.179 0.25 0.358
1 ¼ 1.66 0.109 0.14 0.14 0.191 0.191 0.25 0.382
1 ½ 1.9 0.109 0.145 0.145 0.2 0.2 0.281 0.4
2 2.375 0.109 …….. …….. 0.154 0.154 …….. 0.218 0.218 …….. …….. …….. 0.344 0.436
2 ½ 2.875 0.12 …….. …….. 0.203 0.203 …….. 0.276 0.276 …….. …….. …….. 0.375 0.552
3 3.5 0.12 …….. …….. 0.216 0.216 …….. 0.3 0.3 …….. …….. …….. 0.438 0.6
3 ½ 4 0.12 …….. …….. 0.226 0.226 …….. 0.318 0.318 …….. …….. …….. …….. 0.636
4 4.5 0.12 …….. …….. 0.237 0.237 …….. 0.337 0.337 …….. 0.438 …….. 0.531 0.674
5 5.563 0.134 …….. …….. 0.258 0.258 …….. 0.375 0.375 …….. 0.5 …….. 0.625 0.75
6 6.625 0.134 …….. …….. 0.28 0.28 …….. 0.432 0.432 …….. 0.562 …….. 0.719 0.864
8 8.625 0.148 0.25 0.277 0.322 0.322 0.406 0.5 0.5 0.594 0.719 0.812 0.906 0.875
10 10.75 0.165 0.25 0.307 0.365 0.365 0.5 0.5 0.594 0.719 0.844 1 1.125 1
12 12.75 0.18 0.25 0.33 0.375 0.406 0.562 0.5 0.688 0.844 1 1.125 1.312 1
14 14 0.25 0.312 0.375 0.375 0.438 0.594 0.5 0.75 0.938 1.094 1.25 1.406 ……..
16 16 0.25 0.312 0.375 0.375 0.5 0.656 0.5 0.844 1.031 1.219 1.438 1.594 ……..
18 18 0.25 0.312 0.438 0.375 0.562 0.75 0.5 0.938 1.156 1.375 1.562 1.781 ……..
20 20 0.25 0.375 0.5 0.375 0.594 0.812 0.5 1.031 1.281 1.5 1.75 1.969 ……..
22 22 0.25 …….. …….. 0.375 …….. …….. 0.5 …….. …….. …….. …….. …….. ……..
24 24 0.25 0.375 0.562 0.375 0.688 0.969 0.5 1.219 1.531 1.812 2.062 2.344 ……..

Price List Of ASTM B564 Incoloy 800 Flanges In India

Size Class Schedule Price In INR (Per Piece)
Incoloy 800 Slip On Flange
1" Class 150 Schedule 40 350.00
2" Class 150 Schedule 40 750.00
3" Class 150 Schedule 40 1000.00
4" Class 300 Schedule 80 1300.00
Incoloy 800 Weld Neck Flange
2" Class 150 Schedule 40 600.00
3" Class 150 Schedule 40 750.00
4" Class 150 Schedule 40 1099.00
6" Class 300 Schedule 80 1800.00
8" Class 300 Schedule 80 2400.00
Incoloy 800 Blind Flange
3/4" Class 150 Schedule 40 350.00
1" Class 150 Schedule 40 599.00
1-1/2" Class 150 Schedule 40 700.00
2" Class 150 Schedule 40 1000.00
3" Class 150 Schedule 40 1300.00
4" Class 150 Schedule 40 1900.00
6" Class 300 Schedule 80 2200.00
Incoloy 800 Socket Weld Flange
3/4" Class 150 Schedule 40 357.00
1” Class 150 Schedule 40 479.00
1-1/2” Class 150 Schedule 40 734.00

One Of India’s Largest Manufacturer Of Incoloy 800 Flanges in India. For final Alloy 800/ 800H Flanges Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.



PDO Approved Manufacturer Of Incoloy 800 Flanges

Incoloy UNS N08810 Flange

Incoloy UNS N08810 Flange

ASTM B564 Alloy 800 Threaded Flanges

ASTM B564 Alloy 800 Threaded Flange

ASME SB 564 Incoloy 800 Socket weld Flanges

ASME SB 564 Incoloy 800 Socket weld Flange

Incoloy 800H Flange

Incoloy 800H Flange

Alloy 800 Weld Neck Flanges

Alloy 800 Weld Neck Flange

Nickel Alloy 800 Flanges

Nickel Alloy 800 Flange

800 Incoloy SORF Flange

800 Incoloy SORF Flange

1.4876 Alloy 800 Lap Joint Flange

1.4876 Alloy 800 Lap Joint Flange


No Matter Where The Location, Recently We Have Successfully Supplied Incoloy 800 Flanges To The Following Countires

BS NA 15 Plate Flange Bahrain, South Africa, Singapore
Incoloy 800 Ring Joint Type Flange Singapore, Malaysia, Canada, Philippines
Alloy 800 Long Weld Neck Flange Indonesia, Belgium, Dammam -KSA, Philippines.
Incoloy alloy 800 Flange Poland, Canada, Ellington -United States, UK
JIS NCF 800 Weld Neck Flange Malaysia, Hong Kong, Oman, UAE
UNS N08810 RTJ Flange Netherlands, Russia, Dubai, Malaysia
ASTM B564 Alloy 800 Raised Face Flange Saudi Arabia (KSA), Kuwait, South Africa, Brazil
Werkstoff Nr. 1.4876 Blind Flange Nigeria, Australia, Philippines, UK
Alloy 800 Slip On Flange Europe, UAE, United Kingdom -UK, Malaysia
ASTM B564 Alloy 800 Flange Malaysia, Sweden, Colombia, China
GOST ЭИ670 Forged Flange Thailand, Europe, France, Qatar
EN X10NiCrAlTi32-20 Lap Joint Flange Norway, Malaysia, United Arab Emirates (UAE), Turkey
Incoloy 800 Spectacle Blind Flange Europe, Romania, Japan, Malaysia
ASTM B564 Incoloy 800 Flange Czechia, Malaysia, Germany, Thailand
Alloy 800 Flange Malaysia, USA, Finland, Bangladesh
ASTM B564 UNS N08810 Flange Iran, Chile, Italy, Singapore
Nickel Alloy 800 Flange Spain, UK, Egypt, Mexico