- +91-22-23865529
- enquiry@siddhagirimetals.com
Incoloy 825 Round Bar
ASTM B425 UNS N08825 Rod and Flat Bar manufacturer in India.
Incoloy is a group of superalloys mostly made out of Nickel, Iron, and Chromium. They are designed for corrosion resistance and high creep and rupture properties. Incoloy 825 Round Bar uses additional copper and molybdenum. It has a better resistance against Incoloy 800 against aqueous corrosion and it is designed to work against sulfuric acids. It is also known as Alloy 825 Flat Bar and has a moderate density of 8.14 g/cm3 and provides 30% elongation in the annealed state. The standardized version ASTM B425 UNS N08825 Bar stock has austenitic microstructure and it supports ductility in cryogenic temperature. It has a high melting range of 1370-1400 Celsius and thus it is useful in oil and gas well piping and nuclear fuel reprocessing. The UNS N08825 Bright Bar provides a minimum tensile strength of 586 MPa and a yield strength of 241 MPa at room temperature. As its elasticity modulus is around 28.4 MPa, it is used in chemical processing. The Incoloy 825 Square bar has resistance to stress cracking and localized pitting and crevice corrosion but it cannot be hardened by heat treating. Thus it is annealed at the temperature of 1000 Fahrenheit.
Under Werkstoff standard, 2.4858 Alloy 825 Rod uses copper and titanium to provide the tensile strength of 585 N/mm2 and yield strength of 240 N/mm2. It is heat-treated to provide hardness in the range of 135-165 HB. The chromium helps in providing resistance to chloride pitting.
Inconel 825 Hex Bar is useful for industries that use sulphuric and phosphoric acids. It has a tensile strength of 85 ksi and supports high temperatures. However, exposure to temperatures above 1000 Fahrenheit could lower ductility and impact strength.
Incoloy 825 Round Bar
Alloy 825 Hex Bar
UNS N08825 Flat Bar
Nickel Alloy 825 Rod
Inconel 825 Square Bar
Table Of Content
- Specification Chart Of Inconel 825 Round Bar
- Alloy 825 Rod Price List In India
- Chemical Structure Of UNS N08825 Hex Bar
- Mechanical Properties Data Sheet Of ASTM B408 Incoloy 825 Flat Bar
- Equivalent Grades Of ASME SB425 Incoloy 825 Bright Bar
- Finishes Type Of Alloy 825 Rod
- Nickel Alloy 825 Square Bar Condition
- ASTM B425 UNS N08825 Incoloy 825 Bar Schedule Chart
- Available Shapes Of Inconel 825 (UNS N08825) Round Rod
- Werkstoff Nr. 2.4858 Hollow Bar Dimensional Tolerance
- 825 Nickel Alloy Flat Bar Size Chart
- ASTM B425 UNS N08825 Round Bar Dimensional Format
- Most Common Types Of Incoloy 825 Round Bar For Sale In Mumbai, India
We stock and produce Alloy 825 in various shapes including DIN 2.4858 hex/Square bar.
| Specification Of: | Incoloy 825 Round Bar |
|---|---|
| Grade And UNS Number | ASTM B425/ UNS N08825 |
| Size Chart | Flat Bars (2 -100mm (Millimeter), Square bars (4 to 100 Millimeter), Angle Bars (3*20*20~12*100*100 In MM), Round Bars (Diameter 3-~800 Millimeter), Hex Bars (2-100mm (Millimeter) A/F), |
| Type Of Nickel Alloy 825 Rod | Round Bars/ Hex Bars/ Angle Bars/ Channel Bars/ Flat Bars/ Square bars |
| Surface Area | Cold Drawn/ Polished And Hairline/ Bright |
| Technique Use To Making Bar | Cold Rolled/ Forged Round Bar/ Cold Drawn/ Rod/ Hot Rolled |
| Size Of Rectangles | 33 x 30 millimeter to 295 x 1066 millimeter |
| Bar Standard | ASTM/ASME B166 And AMS 5513, AMS 5647 Or AMS 5511 |
| Outside Diameter Of Hollow Bar | 32 Outside Diameter x 16 Inside Diameter to 250 Outside Diameter x 200 Inside Diameter In MM) |
| Type Of Finish | Smooth Turned/ Cold (bright)/ Drawn Hot Rolled/ Centreless Ground |
| Cutting Processing | Bars Cutting To 650 millimeter |
| Best Deals On Bulk Procurement Of Inconel 825 Hex Bar | Abu-Dhabi, Brisbane, Vasai-Virar, Shanghai, Jamshedpur, Coimbatore, Indore, Al-Khobar, Manama, Johor-Bahru, Navi-Mumbai, Delhi, Calgary, Cairo, Surat, Baku, Bengaluru, Alexandria, Agra, Dallas, Sydney, Thane, Istanbul, Mexico-City, Kochi, Riyadh, Ghaziabad, Hanoi, Milan, Singapore, Gurgaon, Oyama, Guwahati, Ankleshwar, Mysuru, Puchong, Visakhapatnam, Sao-Paulo, Hazira, Beijing, Quezon-City, Bangkok, Ahmedabad, Houston, Al-Jubail, Jakarta, Tiruchirappalli, Secunderabad, Chennai, Ambernath, Madrid, Ajman, New-Delhi, Chicago, Pimpri-Chinchwad, Dubai, London, Nashik, Jeddah, Chandigarh, Hangzhou, Vung-Tau, Seoul, Pune, Dhaka, Paris, Dombivli, Santiago, Tehran, Hyderabad, Lucknow, Vapi, Karachi, Sharjah, Ludhiana, Noida, Kota, Kalyan, Ashburn, Nagpur, Melbourne, Bogota, Mumbai, Doha, Batam, Jamnagar, Lagos, Bhopal, Kolkata, Shah-Alam, Panipat, Jaipur, Vadodara, Kuala-Lumpur, Amsterdam, Busan, Bhubaneswar, Dammam, Rajkot, Ho-Chi-Minh-City, Perth, Surabaya, Faridabad, Zhengzhou, Patna, Raipur, |
| Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
| Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
we maintain ready stock of UNS N08825 Bright Bar Ex Mumbai at lowest price.
| Size | Grade | Price In INR Per Unit |
|---|---|---|
| Size :50mm Diameter X 500 Mm | Incoloy 825 | 764.00 |
| Size :60mm Diameter X 400 Mm | Incoloy 825 | 589.00 |
| Size :80mm Diameter X 500 Mm | Incoloy 825 | 1023.00 |
Largest supplier of small-quantity Of Incoloy 825 Round Bar in India. For final UNS N08825 Rod Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.
| Incoloy 825 Round Bar Chemical Composition, % | |
|---|---|
| Silicon | ≤0.50 |
| Aluminum | ≤0.20 |
| Molybdenum | 2.5-3.5 |
| Copper | 1.5-3.0 |
| Carbon | ≤0.05 |
| Nickel | 38.0-46.0 |
| Titanium | 0.6-1.2 |
| Iron | ≥22.0 |
| Chromium | 19.5-23.5 |
| Manganese | ≤1.00 |
| Sulfur | ≤0.030 |
Check live price of Inconel Alloy 825 Cold Drawn and hot rolled rod, Get free quote Now!, Incoloy 825 Bar PDF.
| Tensile Strength, minimum | Yield Strength, minimum | Elongation, minimum | Elastic Modulus | |||
|---|---|---|---|---|---|---|
| Mpa | % | Gpa | 106psi | ksi | Mpa | ksi |
| 690 | 45 | 206 | 29.8 | 100 | 310 | 45 |
| STANDARD | WERKSTOFF NR. | BS | EN | OR | UNS | GOST | AFNOR | JIS |
|---|---|---|---|---|---|---|---|---|
| Incoloy 825 Round Bar | 2.4858 | NA 16 | NiCr21Mo | XH38BT | N08825 | ЭП703 | NFE30C20DUM | NCF 825 |
| Cold drawn | CD | Polished | P |
| Bright drawn | BD | Slit rolled edge | SRE |
| Centreless ground | CG | Hot finished | HF |
| Cold finished | CF | Hot rolled annealed and pickled | HRAP |
| Peeled and turned | P And T | Rough turned/peeled | RT |
| Smooth turned | ST | Peeled and reeled | PR |
825 Inconel Hollow Bar available in ready stock upto 3 mm To 800 mm size in various shape.
| Hardened and tempered | H And T |
| Annealed | ANN |
| Precipitation hardened | PH |
| Incoloy 825 Round Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size In Millimeter | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr |
| 3millimeter | 0.017 | 0.055 | 20millimeter | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22millimeter | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4millimeter | 0.030 | 0.098 | 24millimeter | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25millimeter | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5millimeter | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26millimeter | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6millimeter | 0.068 | 0.223 | 27millimeter | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7millimeter | 0.091 | 0.298 | 30millimeter | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8millimeter | 0.120 | 0.398 | 32millimeter | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9millimeter | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35millimeter | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10millimeter | 0.189 | 0.620 | 36millimeter | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11millimeter | 0.228 | 0.748 | 38millimeter | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12millimeter | 0.271 | 0.889 | 40millimeter | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13millimeter | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14millimeter | 0.368 | 1.207 | 45millimeter | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15millimeter | 0.424 | 1.391 | 48millimeter | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50millimeter | 4.698 | 15.414 | |||
| 16millimeter | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17millimeter | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18millimeter | 0.610 | 2.001 | 60millimeter | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 | ||||||
|
|
| Cold Drawn Tolerances | ||
|---|---|---|
| Shape And Section | Diameter And Size & width Across Flat | Permitted variation |
| millimeter | millimeter | |
| Round | ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 | + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140 |
| Flats (thick.) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.250, + 0 to - 0.350 |
| Flats Bar (width Of Bar) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.190, + 0 to - 0.220, + 0 to - 0.350, + 0 to - 1.00, + 1.00 to - 1.00 |
| Square Bar and, hexagon Bar | ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 | + 0 to - 0.090, + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.250 |
| Type Of Bar | Size In Millimeter | Size In Inches | Tolerance In ISO |
|---|---|---|---|
| Cold Drawn ; Polish Round Bars | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
| Cold Drawn ; Ground Bars | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
| Peeled ; Polished Round Bars | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
| Peeled ; Ground Bars | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
| Dimensions Of Incoloy 825 Round Bar | |||||||
|---|---|---|---|---|---|---|---|
| Size Of Metric | US Bar Standard | Canadian Standard | Japanese Standard | ||||
| Size Of Bar | Diameter In (millimeter) | Bars Size | Diameter In (Inches) | Bars Size | Diameter In (millimeter2) | Bars Size | Diameter In (millimeter) |
| 5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
| 5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
| 6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
| 7 | 7 | #5 | 0.600 | 25M | 500 | 16 | 16 |
| 8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
| 9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
| 10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
| 11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
| 12 | 12 | #10 | 1.250 | 32 | 32 | ||
| 14 | 14 | #11 | 1.375 | 35 | 35 | ||
| 16 | 16 | #12 | 1.500 | 38 | 38 | ||
| 18 | 18 | #13 | 1.600 | 41 | 41 | ||
| 20 | 20 | #14 | 1.750 | 44 | 44 | ||
| 22 | 22 | #15 | 1.875 | 48 | 48 | ||
| 25 | 25 | #16 | 2.000 | 51 | 51 | ||
| 28 | 28 | #18 | 2.250 | 57 | 57 | ||
| 32 | 32 | ||||||
| 36 | 36 | ||||||
| 40 | 40 | ||||||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
Alloy 825 Incoloy Bright Bar
2.4858 Incoloy 825 Polished Bar
Incoloy 825 Nickel Black Bar
Alloy 825 Nickel Bar Material
Incoloy 825 Nickel Alloy Annealed Bar
ASTM B425 Gr 825 Hex Bar
Incoloy 825 Alloy Flat Bar
Alloy Incoloy 825 Rod
| Inconel Alloy 825 Rod | Chile, Singapore, Italy, Iran |
| UNS N08825 Hex Bars | UK, Mexico, Egypt, Spain |
| ASTM B425 Incoloy 825 Bright Bars | Poland, Canada, UK, Ellington -United States |
| Nickel Alloy 825 Bars | Europe, UAE, Malaysia, United Kingdom -UK |
| ASTM B425 UNS N08825 Incoloy 825 Round Bars | Norway, Malaysia, United Arab Emirates (UAE), Turkey |
| Inconel 825 Square Bars | Indonesia, Belgium, Dammam -KSA, Philippines. |
| ASTM B408 Incoloy 825 Flat Bars | Malaysia, Philippines, Canada, Singapore |
| Alloy 825 Incoloy Bright Bars | Saudi Arabia (KSA), Kuwait, South Africa, Brazil |
| 2.4858 Incoloy 825 Polished Bar | Australia, UK, Philippines, Nigeria |
| ASTM B425 Gr 825 Hex Bars | Russia, Malaysia, Dubai, Netherlands |
| Alloy Incoloy 825 Rod | Europe, Qatar, France, Thailand |
| Alloy 825 Nickel Bright Bar | Malaysia, Thailand, Germany, Czechia |
| ASTM B425 Incoloy 825 Annealed Bars | USA, Bangladesh, Finland, Malaysia |
| 825 Din 2.4858 Cold Drawn Round Bar | Hong Kong, UAE, Oman, Malaysia |
| Incoloy 825 Rectangular Bar | Bahrain, Singapore, South Africa |