Incoloy is a group of superalloys mostly made out of nickel. They are designed for corrosion resistance and providing high strength at high temperatures. An advanced version of this group, Incoloy 800HT Round Bar is modified out of Incoloy 800 to provide high creep-rupture strength. This makes it suitable for handling high loads. It is also sold as Alloy 800H Rod and has high tensile strength between 54-77 MPa and Yield strength between 13-21 MPa in the annealed condition. It provides 23% elongation when heated between 650-800 Celsius. Its standardized version, UNS N08811 Flat Bar is a dual certifiable alloy to resist oxidation and carburization. It has a high tensile strength of 531 N/mm2 and thus useful in the oil and gas industry. Its Werkstoff equivalent DIN 1.4958 Hex Bar has a yield strength of more than 200 N/mm2 and more than 52% elongation when heated. It supports cold and hot working and has hardness around 127 HB. Industry uses its equivalent DIN 1.4859 Bright Bar as it provides more tensile strength of 750 MPa at 20 degrees Celsius. It can sustain in the temperature ranges of 1292-1832 Fahrenheit for long, thus providing high creep resistance.
American society certified ASTM B408 UNS N08810 rod has a relatively low density of 7.94 kg/dm3 which provides moderate strength and 126 kN/mm2 of modulus of elasticity at 100 degrees Celsius. It supports high loads due to its yield strength of over 80 MPa at 500 Celsius. It is heat-treated in the range of 2192-1652 Fahrenheit and cooled by either air or water, thus useful in power plants and chemical industries.
NCF 800H Square bar supports hot working between 1000-1230 Celsius, below this temperature cracks can develop in it. It is useful in corrosive environments that use nitric acid.
Specification Of: | Incoloy 800HT Round Bar |
---|---|
Grade And UNS Number | ASTM B408 UNS N08810 |
Technique Use To Making Bar | Cold Rolled/ Forged Round Bar/ Cold Drawn/ Rod/ Hot Rolled |
Cutting Processing | Bars Cutting To 650 millimeter |
Size Chart | Round Bars (Diameter 3-~800 Millimeter), Hex Bars (2-100mm (Millimeter) A/F), Flat Bars (2 -100mm (Millimeter), Square bar (4 to 100 Millimeter), Angle Bars (3*20*20~12*100*100 In MM)) |
Type Of Nickel Alloy 800H Bar | Round Bars/ Hex Bars/ Flat Bars/ Square bars/ Angle Bars/ Channel Bars |
Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
Type Of Finish | Smooth Turned/ Cold (bright)/ Drawn Hot Rolled/ Centreless Ground |
Surface Area | Cold Drawn/ Polished And Hairline/ Bright |
Outside Diameter Of Hollow Bar | 32 Outside Diameter x 16 Inside Diameter to 250 Outside Diameter x 200 Inside Diameter In MM) |
Size Of Rectangles | 33 x 30 millimeter to 295 x 1066 millimeter |
Bar Standard | ASTM/ASME B166 And AMS 5513, AMS 5647 Or AMS 5511 |
Largest Independent Stockholder Of Inconel 800HT Rod | Sharjah, Quezon-City, Oyama, Surat, Dallas, Lagos, Raipur, Chicago, Kolkata, Ludhiana, Amsterdam, Pune, Seoul, Surabaya, Vapi, Al-Khobar, Noida, Jakarta, Vadodara, Nashik, Lucknow, Agra, Houston, Melbourne, Hanoi, Tehran, Bangkok, Batam, Chandigarh, Jaipur, Tiruchirappalli, Kota, Chennai, Nagpur, Coimbatore, Hyderabad, Ho-Chi-Minh-City, Delhi, Kalyan, London, Jamshedpur, Dhaka, Jamnagar, Bhopal, New-Delhi, Rajkot, Perth, Ajman, Istanbul, Ashburn, Vasai-Virar, Johor-Bahru, Navi-Mumbai, Brisbane, Jeddah, Sydney, Visakhapatnam, Milan, Baku, Calgary, Paris, Faridabad, Gurgaon, Dombivli, Cairo, Bhubaneswar, Karachi, Pimpri-Chinchwad, Riyadh, Kochi, Busan, Mumbai, Alexandria, Beijing, Santiago, Zhengzhou, Hangzhou, Puchong, Patna, Shah-Alam, Ankleshwar, Vung-Tau, Indore, Shanghai, Bogota, Guwahati, Panipat, Thane, Singapore, Hazira, Secunderabad, Mysuru, Bengaluru, Al-Jubail, Mexico-City, Abu-Dhabi, Kuala-Lumpur, Dubai, Ambernath, Ghaziabad, Sao-Paulo, Dammam, Ahmedabad, Doha, Manama, Madrid, |
Size | Grade | Price In INR Per Meter |
---|---|---|
85 X 4000MM | Incoloy 800HT | 3099.00 |
100 X 6000MM | Incoloy 800HT | 6599.00 |
Special Price for Incoloy 800HT Round Bar in India. For final Nickel Alloy 800HT Hex Bar Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.
Grade | Cu | Ni | Fe | C | Mn | Si | Al | S | Cr |
Incoloy 800H Round Bar | 0.75 maximum | 30.0-35.0 | 39.5 minimum | 0.05 – 0.10 | 1.50 maximum | 1 maximum | 0.15 – 0.60 | 0.015 maximum | 19.0-23.0 |
Incoloy 800HT Round Bar | 0.75 maximum | 30.0-35.0 | 39.5 minimum | 0.06 – 0.10 | 1.50 maximum | 1 maximum | 0.15 – 0.60 | 0.015 maximum | 19.0-23.0 |
Density | Yield Strength (0.2%Offset) | Elongation | Melting Point | Tensile Strength |
---|---|---|---|---|
7.94 g/cm3 | Psi – 30,000 , MPa – 205 | 30 % | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 |
STANDARD | WERKSTOFF NR. | BS | EN | OR | UNS | GOST | AFNOR | JIS |
---|---|---|---|---|---|---|---|---|
Incoloy 800H Round Bar | 1.4958 / 1.4876 | NA 15(H) | X5NiCrAlTi31-20 | XH32T | N08810 | ЭИ670 | Z8NC33-21 | NCF 800H |
Incoloy 800HT Round Bar | 1.4859 / 1.4876 | NA 15(HT) | X8NiCrAlTi32-21 | XH32T | N08811 | ЭИ670 | - | NCF 800HT |
Cold drawn | CD | Polished | P |
Bright drawn | BD | Slit rolled edge | SRE |
Centreless ground | CG | Hot finished | HF |
Cold finished | CF | Hot rolled annealed and pickled | HRAP |
Peeled and turned | P And T | Rough turned/peeled | RT |
Smooth turned | ST | Peeled and reeled | PR |
Hardened and tempered | H And T |
Annealed | ANN |
Precipitation hardened | PH |
Type Of Bar | Size In Millimeter | Size In Inches | Tolerance In ISO |
---|---|---|---|
Cold Drawn ; Polish Round Bars | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
Cold Drawn ; Ground Bars | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
Peeled ; Polished Round Bars | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
Peeled ; Ground Bars | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
Inconel 800HT Round Bar Dimensions | |||||||
---|---|---|---|---|---|---|---|
Size Of Metric | US Bar Standard | Canadian Standard | Japanese Standard | ||||
Size Of Bars | Diameter In (millimeter) | Bars Size | Diameter In (Inches) | Bars Size | Diameter In (millimeter2) | Bars Size | Diameter In (millimeter) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.600 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.600 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Cold Drawn Tolerances | ||
---|---|---|
Shape And Section | Diameter And Size & width Across Flat | Permitted variation |
millimeter | millimeter | |
Round | ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 | + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140 |
Flats (thick.) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.250, + 0 to - 0.350 |
Flats Bar (width Of Bar) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.190, + 0 to - 0.220, + 0 to - 0.350, + 0 to - 1.00, + 1.00 to - 1.00 |
Square Bar and, hexagon Bar | ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 | + 0 to - 0.090, + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.250 |
|
|
Incoloy 800HT Round Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Size In Millimeter | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr |
3millimeter | 0.017 | 0.055 | 20millimeter | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
1/8" | 0.019 | 0.062 | 22millimeter | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
4millimeter | 0.030 | 0.098 | 24millimeter | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
3/16" | 0.043 | 0.141 | 25millimeter | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
5millimeter | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
7/32" | 0.058 | 0.190 | 26millimeter | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
6millimeter | 0.068 | 0.223 | 27millimeter | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
7millimeter | 0.091 | 0.298 | 30millimeter | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
8millimeter | 0.120 | 0.398 | 32millimeter | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
9millimeter | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
3/8" | 0.170 | 0.557 | 35millimeter | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
10millimeter | 0.189 | 0.620 | 36millimeter | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
11millimeter | 0.228 | 0.748 | 38millimeter | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
12millimeter | 0.271 | 0.889 | 40millimeter | 3.009 | 9.872 | |||
1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
13millimeter | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
14millimeter | 0.368 | 1.207 | 45millimeter | 3.807 | 12.555 | |||
9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
15millimeter | 0.424 | 1.391 | 48millimeter | 4.330 | 14.205 | |||
5/8" | 0.473 | 1.551 | 50millimeter | 4.698 | 15.414 | |||
16millimeter | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
17millimeter | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
18millimeter | 0.610 | 2.001 | 60millimeter | 6.768 | 22.205 | |||
3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
2-1/2" | 7.576 | 24.856 | ||||||
2-5/8" | 8.354 | 27.409 | ||||||
2-3/4" | 9.169 | 30.083 |
Incoloy 800HT Round Bars | South Africa, Bahrain, Singapore |
ASTM B408 UNS N08810 Rod | Belgium, Dammam -KSA, Indonesia, Philippines. |
Alloy 800HT Rod | Philippines, Canada, Malaysia, Singapore |
ASTM B408 Incoloy 800H Flat Bars | France, Europe, Thailand, Qatar |
UNS N08811 Hex Bars | Philippines, Nigeria, Australia, UK |
Incoloy 800H Round Bars | Oman, Malaysia, Hong Kong, UAE |
Incoloy 800H Din 1.4958 Bright Bars | USA, Finland, Malaysia, Bangladesh |
ASTM B408 Incoloy 800H Flat Bars | Mexico, Egypt, UK, Spain |
Alloy 800H Polished Bars | Canada, Ellington -United States, Poland, UK |
Alloy 800HT Nickel Rod | UAE, United Kingdom -UK, Europe, Malaysia |
Nickel Alloy 800HT Bright Bars | Italy, Iran, Chile, Singapore |
800 Incoloy Square Bar Hot Rolled | Malaysia, United Arab Emirates (UAE), Norway, Turkey |