Incoloy is a group of super alloys mostly made out of nickel. They are designed for corrosion resistance and providing high strength at high temperatures. Incoloy 800 Round Bar is formed by alloying Iron, Nickel, and Chromium with low carbon content which helps in resisting oxidation. It consists of 40% iron and thus provides high tensile strength up to 77 MPa. It is also known as Alloy 800 Rod. This is used in steam generation plants due to their resistance to stress cracking which comes from the yield strength of 13-21 MPa. It follows the UNS N0880 Square bar standard which supports working in temperatures up to 593 degrees Celsius and thus has an advantage over stainless steel. It has a minimum tensile strength of 80 Ksi, thus useful in Industrial furnaces and hydrocarbon cracking. UNS equivalent DIN 1.4876 Hex Bar which is known as Werkstoff number is austenitic and heat resistant. It can be welded with TIG welding, MAG solid wire.
Industry specified ASTM B408 UNS N0880 rod supports forging and it takes place at approx. 1150 C with subsequent water cooling. It is hardened by cold forming as well. However, machining is difficult due to its high alloy content. The Inconel 800 flat bar uses more than 50% nickel has a density of 8 kg/dm3 and thus comes with moderate strength. It is useful in the petrochemical industry as this alloy does not form embrittling sigma phase in temperature up to 650 Celsius.
Incoloy 800 Bright Bar has improved creep and stress rupture properties at 1100 Fahrenheit and is mostly used in furnace components, ammonia effluent coolers. Its tensile strength of 236 MPa at 760 Celsius makes it useful for power plants and heat exchangers.
Table of Content
\
Specification Of: | Incoloy 800 Round Bar |
---|---|
Size Chart | Flat Bars (2 -100mm (Millimeter), Square bars (4 to 100 Millimeter), Angle Bars (3*20*20~12*100*100 In MM), Round Bars (Diameter 3-~800 Millimeter), Hex Bars (2-100mm (Millimeter) A/F) |
Incoloy 800 Bar Cutting Processing | Bars Cutting To 650 millimeter |
Size Of Rectangles | 33 x 30 millimeter to 295 x 1066 millimeter |
Standard Of Incoloy 800 Bars | AMS 5766. ASTM B408 |
Standard Dimensions Of | AISI/ EN/ BS/ ASME/ DIN/ JIS/ ASTM |
Type Of Incoloy 800 Bars | Angle Bars/ Channel Bars/ Flat Bars/ Square bars/ Round Bars/ Hex Bars |
O.D. Of Hollow Bar | 32 Outside Diameter x 16 Inside Diameter to 250 Outside Diameter x 200 Inside Diameter In MM) |
Type Of Incoloy 800 Round Bar Finish | Drawn Hot Rolled/ Centreless Ground/ Smooth Turned/ Cold (bright) |
Surface Area | Polished And Hairline/ Cold Drawn/ Bright |
Technique Use To Making Incoloy 800 Bar | Forged Round Bar/ Cold Drawn/ Cold Rolled/ Rod/ Hot Rolled |
Incoloy 800 Din 1.4876 Bright Bar
Incoloy 800 Nickel Alloy Black Bar
Incoloy 800 Round Bar
Alloy 800 Inconel Hex Bar
Incoloy 800 Alloy Flat Bar
1.4876 Alloy 800 Polished Bar
Alloy 800 Nickel Rod
Inconel 800 Rounds
Price list of Incoloy 800 Round Bar in India | Incoloy 800 Bar Price in India (INR) |
---|---|
Incoloy 800 Polishing Round Bar | US $ 0.2-20 / Piece |
5mm Incoloy 800 Nickel Alloy Round Rod / Bar | US $ 900-3500 / Ton |
Solid Solution Nickel Alloy Incoloy 800 Round Bar | US $ 47-56 / kg |
Incoloy 800 Nickel Base Alloy Round Bar with Best Price | US $ 10-100 / kg |
High Precision Incoloy 800 Round Bar | US $ 20-30 / kg |
ASTM B 408 GR.UNS NO. 8800 INCOLOY 800 ROUND BAR IN 2 MTRS LENGTH, NACE MR-0175. SIZE : 50 MM DIA X 2000 MM LONG | INR 68,474/pcs |
Slit rolled edge | SRE | Bright drawn | BD |
Hot finished | HF | Centreless ground | CG |
Polished | P | Cold drawn | CD |
Hot rolled pickled and annealed | HRAP | Cold finished | CF |
reeled and Peeled | PR | Smooth turned | ST |
Rough turned/peeled | RT | Peeled and turned | P&T |
ANN | Annealed |
H&T | Hardened and tempered. |
PH | Precipitation hardened. |
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
---|---|---|---|
Incoloy 800 Cold Drawn and Polish Round Bar | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
Alloy 800 Inconel Cold Drawn and Ground Bar | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
Hot Rolled Incoloy 800 Round Bar | Cold Drawn Incoloy 800 Round Bar | Hot Forging Incoloy 800 Round Bar | |||||
OD(Milimeter) | OD(Milimeter) | OD(Milimeter) | OD(Milimeter) | OD(Milimeter) | OD(Milimeter) | OD(Milimeter) | OD(Milimeter) |
45 | 8 | 140 | 27 | 2 | 85 | 150 | 50 |
48 | 10 | 145 | 28 | 3 | 90 | 155 | 55 |
50 | 12 | 150 | 30 | 4 | 95 | 160 | 60 |
60 | 15 | 160 | 34 | 6 | 170 | 70 | |
55 | 14 | 155 | 32 | 5 | 100 | 165 | 65 |
70 | 18 | 170 | 36 | 8 | 185 | 80 | |
105 | 30 | 220 | 50 | 16 | 240 | 115 | |
65 | 16 | 165 | 35 | 7 | 180 | 75 | |
80 | 22 | 185 | 40 | 10 | 195 | 90 | |
75 | 20 | 180 | 38 | 9 | 190 | 85 | |
90 | 25 | 195 | 45 | 12 | 210 | 100 | |
85 | 24 | 190 | 42 | 11 | 200 | 95 | |
95 | 27 | 200 | 46 | 14 | 220 | 105 | |
100 | 28 | 210 | 48 | 15 | 230 | 110 | |
115 | 35 | 240 | 60 | 19 | 260 | 125 | |
110 | 32 | 230 | 55 | 18 | 250 | 120 | |
125 | 38 | 260 | 70 | 22 | 280 | 135 | |
120 | 36 | 250 | 65 | 20 | 270 | 130 | |
135 | 42 | 280 | 80 | 25 | 145 | ||
130 | 40 | 270 | 75 | 24 | 300 | 140 |
Tolerances for Cold Drawn | ||
---|---|---|
Shape / Section | Size, diameter or width across flats | Permitted variation |
mm | mm | |
Round | ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 | + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140 |
Flat (thickness) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.250, + 0 to - 0.350 |
Flat (width) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.190, + 0 to - 0.220, + 0 to - 0.350, + 0 to - 1.00, + 1.00 to - 1.00 |
Square and, hexagon | ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 | + 0 to - 0.090, + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.250 |
Tolerances for Cold Drawn | ||
---|---|---|
Shape / Section | Size, diameter or width across flats | Permitted variation |
mm | mm | |
Round | ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 | + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140 |
Flat (thickness) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.250, + 0 to - 0.350 |
Flat (width) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.190, + 0 to - 0.220, + 0 to - 0.350, + 0 to - 1.00, + 1.00 to - 1.00 |
Square and, hexagon | ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 | + 0 to - 0.090, + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.250 |
Precision Tolerances | ||||
---|---|---|---|---|
Section | Size,, diameter | Permitted overall variation | ||
Class A | Class B | Class C | ||
mm | mm | mm | mm | |
Round | ≧ 6 <75 | 0.05 | 0.025 | 0.013 |
ISO “H” SeriesTolerance in MM | ||||||||
---|---|---|---|---|---|---|---|---|
NOMINAL SIZE | h8 | h6 | h5 | h7 | H11 | h9 | h12 | H10 |
DIAMETER mm | ||||||||
over 3 to 6 | +0.018/0 | +0.008/0 | +0.005/0 | +0.012/0 | +0.075/0 | +0.03/0 | +0.12/0 | +0.048/0 |
~ to 3 | +0.014/0 | +0.006/0 | +0.004/0 | +0.01/0 | +0.06/0 | +0.025/0 | +0.1/0 | +0.04/0 |
over 10 to 18 | +0.027/0 | +0.011/0 | +0.008/0 | +0.018/0 | +0.11/0 | +0.043/0 | +0.18/0 | +0.07/0 |
over 180 to 250 | +0.072/0 | +0.029/0 | +0.02/0 | +0.046/0 | +0.29/0 | +0.115/0 | +0.46/0 | +0.185/0 |
over 6 to 10 | +0.022/0 | +0.009/0 | +0.006/0 | +0.015/0 | +0.09/0 | +0.036/0 | +0.15/0 | +0.058/0 |
over 30 to 50 | +0.039/0 | +0.016/0 | +0.011/0 | +0.025/0 | +0.16/0 | +0.062/0 | +0.25/0 | +0.1/0 |
over 18 to 30 | +0.033/0 | +0.013/0 | +0.009/0 | +0.021/0 | +0.13/0 | +0.052/0 | +0.21/0 | +0.084/0 |
over 80 to 120 | +0.054/0 | +0.022/0 | +0.015/0 | +0.035/0 | +0.22/0 | +0.087/0 | +0.35/0 | +0.14/0 |
over 50 to 80 | +0.046/0 | +0.019/0 | +0.013/0 | +0.03/0 | +0.19/0 | +0.074/0 | +0.3/0 | +0.12/0 |
over 120 to 180 | +0.063/0 | +0.025/0 | +0.018/0 | +0.04/0 | +0.25/0 | +0.1/0 | +0.4/0 | +0.16/0 |
metric weights and sizes | |||
---|---|---|---|
Incoloy 800 Flat Bar Size | Colour Code | Kilogram per Meter | (meters) Length |
13 x 3 | Blue | 0.0031 | 6.00 |
10 x 3 | Blue | 0.0024 | |
16 x 3 | Blue | 0.0038 | |
13 x 5 | Orange | 0.0046 | |
16 x 8 | Red | 1.003 | |
16 x 5 | Orange | 0.0064 | |
20 x 5 | Orange | 0.0081 | |
20 x 3 | Blue | 0.0048 | |
20 x 10 | Yellow | 1.061 | |
20 x 6 | White | 0.0097 | |
25 x 5 | Orange | 1.001 | |
25 x 3 | Blue | 0.0060 | |
25 x 8 | Red | 1.061 | |
25 x 6 | White | 1.021 | |
25 x 12 | Pink | 2.041 | |
25 x 10 | Yellow | 2.001 | |
32 x 5 | Orange | 1.029 | |
32 x 3 | Blue | 0.0077 | |
32 x 8 | Red | 2.006 | |
32 x 6 | White | 1.055 | |
32 x 12 | Pink | 3.009 | |
32 x 10 | Yellow | 2.058 | |
40 x 3 | Blue | 0.0097 | |
40 x 6 | White | 1.093 | |
40 x 5 | Orange | 1.061 | |
40 x 10 | Yellow | 3.022 | |
40 x 8 | Red | 2.058 | |
40 x 16 | Grey | 5.015 | |
40 x 12 | Pink | 3.086 | |
50 x 3 | Blue | 1.021 | |
40 x 20 | Green | 6.014 | |
50 x 6 | White | 2.041 | |
50 x 5 | Orange | 2.001 | |
50 x 10 | Yellow | 4.002 | |
50 x 8 | Red | 3.022 | |
50 x 16 | Grey | 6.044 | |
50 x 12 | Pink | 4.083 | |
50 x 25 | Purple | 10.001 | |
50 x 20 | Green | 8.005 | |
65 x 5 | Orange | 2.062 | |
65 x 3 | Blue | 1.057 | |
65 x 8 | Red | 4.018 | |
65 x 6 | White | 3.014 | |
65 x 12 | Pink | 6.028 | |
65 x 10 | Yellow | 5.023 | |
65 x 20 | Green | 10.005 | |
65 x 16 | Grey | 8.037 | |
75 x 5 | Orange | 3.002 | |
75 x 6 | White | 3.062 | |
65 x 25 | Purple | 13.01 | |
75 x 10 | Yellow | 6.004 | |
75 x 8 | Red | 4.083 | |
75 x 16 | Grey | 9.066 | |
75 x 12 | Pink | 7.024 | |
75 x 25 | Purple | 15.01 | |
75 x 20 | Green | 12.01 | |
90 x 5 | Orange | 3.062 | |
75 x 40 | Yellow | 24.01 | |
100 x 25 | Purple | 20.001 | |
90 x 8 | Red | 5.079 | |
90 x 6 | White | 4.035 | |
100 x 16 | Grey | 12.09 | |
90 x 12 | Pink | 8.069 | |
90 x 10 | Yellow | 7.024 | |
100 x 10 | Yellow | 8.005 | |
100 x 6 | White | 4.083 | |
100 x 5 | Orange | 4.002 | |
100 x 8 | Red | 6.044 | |
110 x 10 | Yellow | 8.085 | |
100 x 12 | Pink | 9.066 | |
110 x 6 | White | 5.031 | |
100 x 20 | Green | 16.01 | |
100 x 50 | Green | 40.002 | |
110 x 12 | Pink | 10.006 | |
110 x 8 | Red | 7.008 | |
130 x 6 | White | 6.028 | |
130 x 10 | Yellow | 10.005 | |
130 x 5 | Orange | 5.023 | |
130 x 16 | Grey | 16.07 | |
130 x 8 | Red | 8.037 | |
130 x 25 | Purple | 26.02 | |
130 x 12 | Pink | 12.06 | |
150 x 8 | Red | 9.066 | |
130 x 20 | Green | 20.009 | |
150 x 12 | Pink | 14.05 | |
150 x 5 | Orange | 6.004 | |
150 x 6 | White | 7.024 | |
150 x 20 | Green | 24.01 | |
150 x 10 | Yellow | 12.01 | |
150 x 50 | Green | 60.004 | |
150 x 16 | Grey | 19.03 | |
180 x 6 | White | 8.069 | |
150 x 25 | Purple | 30.001 | |
180 x 12 | Pink | 17.04 | |
180 x 5 | Orange | 7.024 | |
180 x 25 | Purple | 36.02 | |
180 x 10 | Yellow | 14.05 | |
200 x 8 | Red | 12.09 | |
180 x 16 | Grey | 23.02 | |
180 x 20 | Green | 29.00 | |
200 x 12 | Pink | 19.03 | |
200 x 6 | White | 9.066 | |
200 x 25 | Purple | 40.003 | |
200 x 10 | Yellow | 16.01 | |
250 x 10 | Yellow | 20.001 | |
200 x 16 | Grey | 25.07 | |
200 x 20 | Green | 32.02 | |
250 x 25 | Purple | 50.003 | |
250 x 6 | White | 12.01 | |
250 x 8 | Red | 16.01 | |
300 x 12 | Pink | 29.00 | |
250 x 12 | Pink | 24.01 | |
300 x 8 | Red | 19.03 | |
250 x 20 | Green | 40.002 | |
250 x 16 | Grey | 32.02 | |
300 x 6 | White | 14.05 | |
300 x 20 | Green | 48.03 | |
300 x 10 | Yellow | 24.01 | |
300 x 25 | Purple | 60.004 | |
300 x 16 | Grey | 38.06 |
Inconel 800 Round bar Surface Condition | Delivery State Choice |
---|---|
Black | Forged |
Polished | |
Bright | Hot Rolled |
Polished | |
Black | |
Bright | |
Polished | Cold Drawn |
Pickled |
inconel 800 hex bar Wt per Ft | inconel 800 hex bar Size in Inches | inconel 800 hex bar Wt per 12′ |
---|---|---|
0.0180 | 1/4" | 2.0160 |
0.0104 | 3/16" | 1.0248 |
0.0625 | 3/8" | 4.0920 |
0.0290 | 5/16" | 3.0480 |
0.0740 | 1/2" | 8.0880 |
0.0560 | 7/16" | 6.072 |
1.0150 | 5/8" | 13.080 |
0.0930 | 9/16" | 11.016 |
1.0660 | 3/4" | 19.092 |
1.0390 | 11/16" | 16.068 |
2.0300 | 7/8" | 27.060 |
1.0950 | 13/16" | 23.040 |
2.090 | 1" | 34.080 |
2.0625 | 15/16" | 31.020 |
3.0700 | 1-1/8" | 44.040 |
3.030 | 1-1/16" | 39.060 |
5.0100 | 1-5/16" | 61.020 |
4.0625 | 1-1/4" | 55.020 |
6.0100 | 1-7/16" | 73.020 |
5.0625 | 1-3/8" | 67.020 |
7.0800 | 1-5/8" | 93.060 |
6.0625 | 1-1/2" | 79.020 |
10.0400 | 1-7/8" | 124.080 |
9.0030 | 1-3/4" | 108.036 |
14.0920 | 2-1/4" | 179.004 |
11.080 | 2" | 141.060 |
18.042 | 2-1/2" | 221.004 |
16.0920 | 2-3/8" | 203.004 |
26.053 | 3" | 318.036 |
Incoloy 800 Hollow Bar Size | Chucked true to Outside Diameter | Chucked true to Inside Diameter | |||||||
---|---|---|---|---|---|---|---|---|---|
Inside Diameter, milimeter | Outside Diameter milimeter | Maximum Outside Diameter milimeter | Minimum Inside Diameter, milimeter | Maximum Outside Diameter, in. | Minimum Inside Diameter, in. | Minimum Inside Diameter, milimeter | Maximum Outside Diameter milimeter | Minimum Inside Diameter, in.00 | Maximum Outside Diameter in. |
20 | 32 | 31 | 21.009 | 1.0220 | 0.00862 | 21 | 30 | 0.00827 | 1.00185 |
16 | 32 | 31 | 18 | 1.0220 | 0.00709 | 17 | 30 | 0.00669 | 1.00181 |
25 | 36 | 35 | 26.009 | 1.0378 | 1.00059 | 26 | 34.001 | 1.00024 | 1.00343 |
20 | 36 | 35 | 22 | 1.0378 | 0.00866 | 21 | 34 | 0.00827 | 1.00339 |
16 | 36 | 35 | 18.001 | 1.0378 | 0.00713 | 17 | 33.009 | 0.00669 | 1.00335 |
28 | 40 | 39 | 29.009 | 1.0535 | 1.00177 | 29 | 38.001 | 1.00142 | 1.00500 |
25 | 40 | 39 | 27 | 1.0535 | 1.00063 | 26 | 38 | 1.00024 | 1.00496 |
20 | 40 | 39 | 22.001 | 1.0535 | 0.00870 | 21 | 37.009 | 0.00827 | 1.00492 |
32 | 45 | 44 | 33.009 | 1.0732 | 1.00335 | 33 | 43.001 | 1.00299 | 1.00697 |
28 | 45 | 44 | 30 | 1.0732 | 1.00181 | 29 | 43 | 1.00142 | 1.00693 |
20 | 45 | 44 | 22.002 | 1.0732 | 0.00874 | 21 | 42.008 | 0.00827 | 1.00685 |
36 | 50 | 49 | 38 | 1.0929 | 1.00496 | 37 | 48 | 1.00457 | 1.00890 |
32 | 50 | 49 | 34.001 | 1.0929 | 1.00343 | 33 | 47.009 | 1.00299 | 1.00886 |
25 | 50 | 49 | 27.002 | 1.0929 | 1.00071 | 26 | 47.008 | 1.00024 | 1.00882 |
40 | 56 | 55 | 42 | 2.0165 | 1.00654 | 41 | 54 | 1.00614 | 2.00126 |
36 | 56 | 55 | 38.001 | 2.0165 | 1.00500 | 37 | 53.009 | 1.00457 | 2.00122 |
28 | 56 | 55 | 30.003 | 2.0165 | 1.00193 | 29 | 53.007 | 1.00142 | 2.00114 |
50 | 63 | 62 | 51.009 | 2.0441 | 2.00043 | 51 | 61.001 | 2.00008 | 2.00406 |
45 | 63 | 62 | 47 | 2.0441 | 1.00850 | 46 | 61 | 1.00811 | 2.00402 |
40 | 63 | 62 | 42.002 | 2.0441 | 1.00661 | 41 | 60.008 | 1.00614 | 2.00394 |
36 | 63 | 62 | 38.003 | 2.0441 | 1.00508 | 37 | 60.007 | 1.00457 | 2.00390 |
32 | 63 | 62 | 34.004 | 2.0441 | 1.00354 | 33 | 60.006 | 1.00299 | 2.00386 |
56 | 71 | 69.009 | 58 | 2.0752 | 2.00283 | 57 | 68.009 | 2.00244 | 2.00713 |
45 | 71 | 69.009 | 47.003 | 2.0752 | 1.00862 | 46 | 68.006 | 1.00811 | 2.00701 |
40 | 71 | 69.009 | 42.004 | 2.0752 | 1.00669 | 41 | 68.005 | 1.00614 | 2.00697 |
36 | 71 | 69.009 | 38.005 | 2.0752 | 1.00516 | 37 | 68.004 | 1.00457 | 2.00693 |
60 | 75 | 73.008 | 62 | 2.0906 | 2.00441 | 61 | 72.008 | 2.00402 | 2.00866 |
50 | 75 | 73.008 | 52.002 | 2.0906 | 2.00055 | 51 | 72.006 | 2.00008 | 2.00858 |
40 | 75 | 73.008 | 42.005 | 2.0906 | 1.00673 | 41 | 72.003 | 1.00614 | 2.00846 |
63 | 80 | 78.008 | 65 | 3.0102 | 2.00559 | 64 | 77.008 | 2.00520 | 3.00063 |
50 | 80 | 78.008 | 52.004 | 3.0102 | 2.00053 | 51 | 77.004 | 2.00008 | 3.00047 |
45 | 80 | 78.008 | 47.005 | 3.0102 | 1.00870 | 46 | 77.003 | 1.00811 | 3.00043 |
40 | 80 | 78.008 | 42.006 | 3.0102 | 1.00677 | 41 | 77.002 | 1.00614 | 3.00039 |
67 | 85 | 83.007 | 69.001 | 3.0295 | 2.00720 | 68 | 82.006 | 2.00677 | 3.00252 |
55 | 85 | 83.007 | 57.004 | 3.0295 | 2.00260 | 56.000 | 82.003 | 2.00205 | 3.00240 |
45 | 85 | 83.007 | 47.006 | 3.0295 | 1.00874 | 46.000 | 82.001 | 1.00811 | 3.00232 |
71 | 90 | 88.006 | 73.001 | 3.0488 | 2.00878 | 72.001 | 87.006 | 2.00839 | 3.00449 |
63 | 90 | 88.006 | 65.003 | 3.0488 | 2.00571 | 64.000 | 87.003 | 2.00520 | 3.00437 |
56 | 90 | 88.006 | 58.005 | 3.0488 | 2.00303 | 57.000 | 87.001 | 2.00244 | 3.00429 |
50 | 90 | 88.006 | 52.006 | 3.0488 | 2.00071 | 51.000 | 87.000 | 2.00008 | 3.00425 |
75 | 95 | 93.005 | 77.003 | 3.0681 | 3.00041 | 76.002 | 92.004 | 2.00997 | 3.00641 |
67 | 95 | 93.005 | 69.003 | 3.0681 | 2.00728 | 68.000 | 92.002 | 2.00677 | 3.00630 |
50 | 95 | 93.005 | 52.007 | 3.0681 | 2.00075 | 51.000 | 91.008 | 2.00008 | 3.00614 |
80 | 100 | 98.005 | 82.003 | 3.0878 | 3.00240 | 81.002 | 97.004 | 3.00197 | 3.00835 |
71 | 100 | 98.005 | 73.004 | 3.0878 | 2.00890 | 72.001 | 97.002 | 2.00839 | 3.00827 |
63 | 100 | 98.005 | 65.005 | 3.0878 | 2.00579 | 64.000 | 97.000 | 2.00520 | 3.00819 |
56 | 100 | 98.005 | 58.007 | 3.0878 | 2.00311 | 57.000 | 96.008 | 2.00244 | 3.00811 |
80 | 106 | 104.004 | 82.005 | 4.0110 | 3.00248 | 81.002 | 103.001 | 3.00197 | 4.00059 |
71 | 106 | 104.004 | 73.005 | 4.0110 | 2.00894 | 72.001 | 103.000 | 2.00839 | 4.00055 |
63 | 106 | 104.004 | 65.007 | 4.0110 | 2.00587 | 64.000 | 102.007 | 2.00520 | 4.00043 |
56 | 106 | 104.004 | 58.009 | 4.0110 | 2.00319 | 57.000 | 102.005 | 2.00244 | 4.00035 |
90 | 112 | 110.003 | 92.005 | 4.0343 | 3.00642 | 91.004 | 109.002 | 3.00598 | 4.00299 |
80 | 112 | 110.003 | 82.006 | 4.0343 | 3.00252 | 81.002 | 108.009 | 3.00197 | 4.00287 |
71 | 112 | 110.003 | 73.007 | 4.0343 | 2.00902 | 72.001 | 108.007 | 2.00839 | 4.00280 |
63 | 112 | 110.003 | 65.008 | 4.0343 | 2.00591 | 64.000 | 108.005 | 2.00520 | 4.00272 |
90 | 118 | 116.002 | 92.007 | 4.0575 | 3.00650 | 91.004 | 114.009 | 3.00598 | 4.00524 |
80 | 118 | 116.002 | 82.008 | 4.0575 | 3.00260 | 81.002 | 114.006 | 3.00197 | 4.00512 |
71 | 118 | 116.002 | 73.008 | 4.0575 | 2.00906 | 72.001 | 114.005 | 2.00839 | 4.00508 |
63 | 118 | 116.002 | 66.000 | 4.0575 | 2.00598 | 64.000 | 114.002 | 2.00520 | 4.00496 |
100 | 125 | 123.001 | 102.007 | 4.0846 | 4.00043 | 101.005 | 121.009 | 3.00996 | 4.00799 |
90 | 125 | 123.001 | 92.008 | 4.0846 | 3.00654 | 91.004 | 121.007 | 3.00598 | 4.00791 |
80 | 125 | 123.001 | 82.009 | 4.0846 | 3.00264 | 81.002 | 121.004 | 3.00197 | 4.00780 |
71 | 125 | 123.001 | 74.000 | 4.0846 | 2.00913 | 72.001 | 121.003 | 2.00839 | 4.00772 |
106 | 132 | 130.000 | 108.008 | 5.0118 | 4.00283 | 107.006 | 128.008 | 4.00236 | 5.00071 |
90 | 132 | 130.000 | 93.000 | 5.0118 | 3.00661 | 91.004 | 128.004 | 3.00598 | 5.00055 |
80 | 132 | 130.000 | 83.001 | 5.0118 | 3.00272 | 81.002 | 128.001 | 3.00197 | 5.00043 |
71 | 132 | 130.000 | 74.002 | 5.0118 | 2.00921 | 72.001 | 121.002 | 2.00839 | 5.00035 |
112 | 140 | 137.009 | 115 | 5.0429 | 4.00528 | 113.007 | 136.006 | 4.00476 | 5.00378 |
100 | 140 | 137.009 | 103.001 | 5.0429 | 4.00059 | 101.005 | 136.003 | 3.00996 | 5.00366 |
90 | 140 | 137.009 | 93.002 | 5.0429 | 3.00669 | 91.004 | 136.001 | 3.00598 | 5.00358 |
80 | 140 | 137.009 | 83.003 | 5.0429 | 3.00280 | 81.002 | 135.008 | 3.00197 | 5.00346 |
125 | 150 | 147.007 | 128.001 | 5.0815 | 5.00043 | 126.009 | 146.005 | 4.00996 | 5.00768 |
106 | 150 | 147.007 | 109.003 | 5.0815 | 4.00303 | 107.006 | 146 | 4.00236 | 5.00748 |
95 | 150 | 147.007 | 98.004 | 5.0815 | 3.00874 | 96.004 | 145.007 | 3.00795 | 5.00736 |
80 | 150 | 147.007 | 83.006 | 5.0815 | 3.00291 | 81.002 | 145.003 | 3.00197 | 5.00720 |
132 | 160 | 157.006 | 135.003 | 6.0205 | 5.00327 | 134 | 156.003 | 5.00276 | 6.00154 |
122 | 160 | 157.006 | 125.004 | 6.0205 | 4.00937 | 123.008 | 156 | 4.00874 | 6.00142 |
112 | 160 | 157.006 | 115.005 | 6.0205 | 4.00547 | 113.007 | 155.008 | 4.00476 | 6.00134 |
90 | 160 | 157.006 | 94.000 | 6.0205 | 3.00701 | 91.004 | 155.002 | 3.00598 | 6.00110 |
140 | 170 | 167.004 | 6.0591 | 5.00650 | 142.001 | 166 | 5.00594 | 6.00535 | |
130 | 170 | 167.004 | 6.0591 | 5.00260 | 132 | 165.008 | 5.00197 | 6.00528 | |
128 | 170 | 167.004 | 6.0591 | 5.00181 | 130 | 165.007 | 5.00118 | 6.00524 | |
118 | 170 | 167.004 | 6.0591 | 4.00791 | 119.008 | 165.005 | 4.00717 | 6.00516 | |
106 | 170 | 167.004 | 6.0591 | 4.00323 | 107.006 | 165.002 | 4.00236 | 6.00504 | |
100 | 170 | 167.004 | 6.0591 | 4.00091 | 101.005 | 165 | 3.00996 | 6.00496 | |
150 | 180 | 177.003 | 6.0980 | 6.00047 | 152.003 | 176 | 5.00996 | 6.00929 | |
140 | 180 | 177.003 | 6.0980 | 5.00657 | 142.001 | 175.007 | 5.00594 | 6.00917 | |
125 | 180 | 177.003 | 6.0980 | 5.00075 | 126.009 | 175.003 | 4.00996 | 6.00902 | |
100 | 180 | 177.003 | 6.0980 | 4.00098 | 101.005 | 174.007 | 3.00996 | 6.00878 | |
160 | 190 | 187.001 | 7.0366 | 6.00449 | 162.004 | 185.007 | 6.00394 | 7.00311 | |
150 | 190 | 187.001 | 7.0366 | 6.00059 | 152.003 | 185.005 | 5.00996 | 7.00303 | |
132 | 190 | 187.001 | 7.0366 | 5.00354 | 134 | 185.001 | 5.00276 | 7.00287 | |
170 | 200 | 197.000 | 7.0756 | 6.00846 | 172.006 | 195.006 | 6.00795 | 7.00701 | |
160 | 200 | 197.000 | 7.0756 | 6.00457 | 162.004 | 195.004 | 6.00394 | 7.00693 | |
150 | 200 | 197.000 | 7.0756 | 6.00067 | 152.003 | 195.002 | 5.00996 | 7.00685 | |
140 | 200 | 197.000 | 7.0756 | 5.00677 | 142.001 | 194.009 | 5.00594 | 7.00673 | |
170 | 212 | 208.008 | 8.0220 | 6.00858 | 172.006 | 207.002 | 6.00795 | 8.00157 | |
150 | 212 | 208.008 | 8.0220 | 6.00079 | 152.003 | 206.006 | 5.00997 | 8.00133 | |
130 | 212 | 208.008 | 8.0220 | 5.00299 | 132 | 206.002 | 5.00197 | 8.00118 | |
180 | 224 | 220.006 | 8.0685 | 7.00260 | 182.007 | 218.009 | 7.00193 | 8.00618 | |
140 | 224 | 220.006 | 8.0685 | 5.00701 | 142.001 | 217.009 | 5.00594 | 8.00579 | |
190 | 236 | 232.004 | 9.0150 | 7.00661 | 192.009 | 230.007 | 7.00594 | 9.00083 | |
150 | 236 | 232.004 | 9.0150 | 6.00102 | 152.003 | 229.007 | 5.00996 | 9.00043 | |
200 | 250 | 246.002 | 9.0693 | 8.00067 | 203.000 | 244.003 | 7.00992 | 9.00618 | |
200 | 275 | 268.009 | 10.0587 | 8.00087 | 203.000 |
Incoloy 800 Square bar – metric sizes and weights | |||
---|---|---|---|
KG’s per Metre | Colour Code | Square bar Size | Standard Length (metres) |
0.081 | Yellow | 10 x 10 | 6.00 |
1.016 | Pink | 12 x 12 | 6.00 |
5.003 | Purple | 25 x 25 | 6.00 |
20.012 | Green | 50 x 50 | 6.00 |
12.08 | Yellow | 40 x 40 | 6.00 |
2.006 | Grey | 16 x 16 | 6.00 |
3.022 | Green | 20 x 20 | 6.00 |
8.024 | Orange | 32 x 32 | 6.00 |
Incoloy Round bar Size | kilogram / Foot | kilogram / Meter | kilogram / Meter | Size | Size | kilogram / Foot | kilogram / Foot | kilogram / Meter |
---|---|---|---|---|---|---|---|---|
1/8" | 0.0019 | 0.0062 | 2.0979 | 22 millimeter | 3 to 1/4" | 12.0800 | 0.0908 | 41.0996 |
3 millimeter | 0.0017 | 0.0055 | 2.0470 | 20 millimeter | 3" | 10.0900 | 0.0753 | 35.0762 |
4 millimeter | 0.0030 | 0.0098 | 3.0543 | 24 millimeter | 3 to 3/4" | 17.0001 | 1.0080 | 55.0780 |
5/32" | 0.0029 | 0.0095 | 3.0038 | 7/8" | 3 to 1/2" | 14.0850 | 0.0926 | 48.0772 |
5 millimeter | 0.0047 | 0.0154 | 3.0970 | 1" | 4 to 1/4" | 21.0908 | 1.0210 | 72.0249 |
3/16" | 0.0043 | 0.0141 | 3.0871 | 25 millimeter | 4" | 19.0306 | 1.0180 | 63.0340 |
6 millimeter | 0.0068 | 0.0223 | 4.0490 | 27 millimeter | 4 to 3/4" | 27.0366 | 1.0368 | 90.0249 |
7/32" | 0.0058 | 0.0190 | 4.0170 | 26 millimeter | 4 to 1/2" | 24.04487 | 1.0271 | 80.0340 |
7 millimeter | 0.0091 | 0.0298 | 5.0548 | 30 millimeter | 5 to 1/2" | 36.0690 | 1.0691 | 121.0000 |
1/4" | 0.0076 | 0.0249 | 5.0033 | 1 to 1/8" | 5" | 30.0461 | 1.0534 | 99.0940 |
8 millimeter | 0.0120 | 0.0398 | 6.0314 | 32 millimeter | 6 to 1/2" | 51.0093 | 1.0894 | 167.0630 |
5/16" | 0.0118 | 0.0387 | 6.0349 | 1 to 1/4" | 6" | 43.0860 | 1.0924 | 143.0900 |
3/8" | 0.0170 | 0.0557 | 7.0553 | 35 millimeter | 7 to 1/2" | 68.0226 | 2.0390 | 225.0000 |
9 millimeter | 0.0152 | 0.0498 | 7.0550 | 1 to 3/8" | 7" | 59.0432 | 2.0303 | 196.0000 |
11 millimeter | 0.0228 | 0.0748 | 8.0903 | 38 millimeter | 10" | 121.0048 | 2.0792 | 397.0140 |
10 millimeter | 0.0189 | 0.0620 | 7.0999 | 36 millimeter | 8" | 77.0586 | 2.0438 | 254.055 |
12 millimeter | 0.0271 | 0.0889 | 9.0872 | 40 millimeter | 3.0009 | |||
7/16" | 0.0232 | 0.0761 | 8.0951 | 1 to 1/2" | 2.0715 | |||
13 millimeter | 0.0318 | 1.0043 | 12.0179 | 1 to 3/4" | 3.0712 | |||
1/2" | 0.0303 | 0.0994 | 10.0449 | 1 to 5/8" | 3.0200 | |||
9/16" | 0.0383 | 1.0256 | 13.0977 | 1 to 7/8" | 4.0260 | |||
14 millimeter | 0.0368 | 1.0207 | 12.0555 | 45 millimeter | 3.0807 | |||
5/8" | 0.0473 | 1.0551 | 15.0414 | 50 millimeter | 4.0698 | |||
15 millimeter | 0.0424 | 1.0391 | 14.0205 | 48 millimeter | 4.0330 | |||
17 millimeter | 0.0543 | 1.0791 | 17.0963 | 2 to 1/8" | 5.0475 | |||
16 millimeter | 0.0481 | 1.0578 | 15.0906 | 2" | 4.0848 | |||
18 millimeter | 0.0610 | 2.0001 | 22.0205 | 60 millimeter | 6.0768 | |||
11/16" | 0.0573 | 1.0880 | 20.0128 | 2 to 1/4" | 6.0135 | |||
3/4" | 0.0682 | 2.0237 | 22.0435 | 2 to 3/8" | 6.0838 | |||
24.0856 | 2 to 1/2" | 7.0576 | ||||||
27.0409 | 2 to 5/8" | 8.0354 | ||||||
30.0083 | 2 to 3/4" | 9.0169 |
Grade | C | Mn | Si | Al | S | Cr | Cu | Ni | Fe |
Incoloy 800 | 0.10 max | 1.50 max | 1 max | 0.15 – 0.60 | 0.015 max | 19.0-23.0 | 0.75 max | 30.0-35.0 | 39.5 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|
7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN | OR |
---|---|---|---|---|---|---|---|---|
Incoloy 800 | 1.4876 | N08800 | ЭИ670 | Z8NC32-21 | NCF 800 | NA 15 | X10NiCrAlTi32-20 | XH32T |
Dammam -KSA, Belgium, Philippines, Indonesia | Incoloy 800 Polishing Round Bar |
Malaysia, Finland, Bangladesh, USA | Incoloy 800 Nickel Base Alloy Round Bar for 3D Printing |
Czechia, Malaysia, Thailand, Germany | Incoloy 800 N08800 Forged/Forging Round Bars |
South Africa, Brazil, Kuwait, Saudi Arabia (KSA) | Nickel DIN 1.4876 Incoloy 800 Alloy Round Bar |
Qatar, Thailand, Europe, France | Incoloy 800 Stainless Steel Seamless Hollow Bar |
Bahrain, Singapore, Singapore, South Africa | Incoloy 800 N08800 Bars |
Oman, UAE, Hong Kong, Malaysia | Incoloy 800 Surface Pickling Round Bar |
Philippines, Nigeria, UK, Australia | Incoloy 800 Forged Bars (UNS N08800, 1.4876, Alloy 800) |
Chile, Singapore, Iran, Italy | Incoloy Grade 800 Stainless Steel Round Bar |
Netherlands, Dubai, Russia, Malaysia | Incoloy 800 Nickel Alloy Round Bar |
United Arab Emirates (UAE), Malaysia, Norway, Turkey | Polishing Finish Steel Rods 8mm Alloy 800 Round Bar |
Egypt, UK, Mexico, Spain | Incoloy 800 Bar |