Incoloy 800HT Seamless Pipe and Tube
ASTM B407 N08810 Welded and ERW Tubing Suppliers at dealer price Ex Mumbai
Incoloy 800H Seamless Pipe
Incoloy 800Ht Tubing
ASTM B407 UNS N08810 Pipe
We manufacture Alloy 800h Square/Rectangular Pipe as per international standards & specifications
Besides these three major metal contents, the ASTM B407 UNS N08811 contains a small amount of Niobium (approx. 5 %), Molybdenum (around 3%), and trace amounts of Titanium (about 1%), aluminium and carbon. The addition of metals like in carbon, aluminium and titanium in trace quantities improves its mechanical contents. For instance, the UNS N08811 Pipe shows an increase in the creep and stress rupture strength. The UNS N08810 Pipe resists corrosion by chlorine and hence does not give into chlorine related stress cracking.The UNS N08810 Pipe is also known to resist oxidation, nitride and carburization in environments that have elevated temperatures.
Table of Content
- Standard Specification of Incoloy 800H/HT Seamless Pipe
- Different Types of Alloy 800H/HT Pipe/ Tube
- Check UNS N08811 Welded Pipe Price List
- Chemical Equation of ASTM B407 UNS N08811 Pipe
- Mechanical Characteristics of 1.4876 Alloy 800 Tube
- Equivalent Material of Inconel 800h Tubing
- Size range of Nickel Alloy 800H Pipe
- Inconel 800ht Tubes Size Range
- Stock list of Incoloy 800Ht Pipe
the Alloy 800ht Pipe can be welded in processes or techniques similar to those used in stainless steel. During the process of cold forming, the Alloy 800h Pipe produces a smooth layer that is visible. This layer formed on the Inconel 800h Pipe is known as an orange peel.The Incoloy 800ht Pipe is used in applications that are required to have a high performance at elevated temperatures and pressure. Therefore, applications of the SB 407 UNS N08811 are often seen in industries like aerospace engineering, electrical resistance heating, welding, electronics and communications, power generation, marine engineering, thermal processing and heat treatment, oil and gas extraction, petrochemical processing, automotive engineering, chemical processing, pollution control and waste processing. We are the leading Incoloy 800ht Pipe Manufacturers
| ASTM / ASME Standards | ASTM B407 / ASME SB407 |
|---|---|
| EFW Pipe size | 5.0 mm - 1219.2 mm |
| Pipe Schedule | SCH5, SCH10, SCH40, STD, SCH80, SCH160 |
| Pipe Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Pipe Form | Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc. |
| Pipe Length | Single Random, Double Random & Cut Length. |
| End | Plain End, Beveled End, Treaded. |
| Marking | All Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 |
| Welded Tube Size | 6.35 mm OD To 152 mm OD |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| tubing wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| tube Length | Single Random, Double Random, Standard & Cut length |
| Tube Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| tube Form | Round, Coil, Square, Rectangular, Boiler, Hydraulic, Straight or ‘U’ bent Tubes, Hollow, LSAW Tubes Etc. |
| Tube Type | Seamless, ERW, EFW, Welded, Fabricated |
| End | Plain End, Beveled End, Treaded |
| Marking | All tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Application | Oil Tube, Gas Tube, Fluid Tube, Boiler and Heatexchanger |
Incoloy 800H Clad Pipe
Alloy 800Ht Seamless Pipe
800Ht Incoloy Pipe
Incoloy 800H Round Pipe
Welded Incoloy 800H Tubes
Incoloy 800Ht Instrument Tubing
Alloy 800Ht Exhaust Tube
Nickel 800H EFW Tube
We help you to save your cost by providing exact size of UNS N08811 High Pressure Tube
| Incoloy 800h/800ht Tubing Price | Quantity | Price in USD |
|---|---|---|
| Alloy 800ht 60.33mm outer dia x2.77mm wall x500 mm long | 2 | $390.59 |
| Alloy 800h 60.33mm outer dia x2.77mm wall x500 mm long | 3 | $542.33 |
| Alloy 800h 60.33mm outer dia x2.77mm wall x500 mm long | 4 | $675.81 |
| Alloy 800ht 60.33mm outer dia x2.77mm wall x500 mm long | 5 | $789.61 |
| Alloy 800ht 60.33mm outer dia x2.77mm wall x1000 mm long | 1 | $313.32 |
| Alloy 800h 60.33mm outer dia x2.77mm wall x1000 mm long | 2 | $562.00 |
| Alloy 800h 60.33mm outer dia x2.77mm wall x1000 mm long | 3 | $771.35 |
| Alloy 800h 60.33mm outer dia x2.77mm wall x2000 mm long | 1 | $484.73 |
| Alloy 800 60.33mm outer dia x2.77mm wall x2000 mm long | 2 | $866.89 |
| Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
| Incoloy 800H | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
| Incoloy 800HT | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
| max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 | |
Check Tolerances, size chart and Price list of Inconel 800h Hollow Pipe Ex Mumbai
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 800-H-HT | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 | – | – |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
| 1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
|---|---|
| SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
| 1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
| 2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
| 2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
| 3" IPS( 3.500" O.D.) | |
| SCH 5, 10, 40, 80, 160, XXH |
Shortest delivery time in Alloy 800ht EFW Tube, Check our Price List
| Wall | Sizes ( O.D.) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .134 | 1" |
| .250 | 3" |
| .375 | 3 1/2" |
| Alloy | Product form | Dimension |
|---|---|---|
| INCOLOY 800 (32 Ni/21 Cr) | Tube; cold drawn, pickled, annealed | 50.8 x 2.64 mm |
| INCOLOY 800HT (32 Ni/21 Cr) | Tube; cold drawn, pickled, solution annealed | 33.40 x 3.38 mm (1"nb sch40s) |
| ALLOY 800HT (32 Ni/21 Cr) | Tube; seamless, cold finished, annealed | 33.40 x 4.55 mm (1"nb sch80s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Tube; cold drawn, pickled, solution annealed | 60.33 x 3.91 mm (2"nb sch40s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Tube; cold drawn, pickled, solution annealed | 60.33 x 2.77 mm (2"nb Sch10s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Tube; cold drawn, pickled, solution annealed | 60.33 x 3.91 mm (2"nb sch40s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Tube; cold drawn, pickled, solution annealed | 88.90 x 5.49 mm (3"nb sch40s) |
| INCOLOY 800 (32 Ni/21 Cr) | Tube; cold drawn, pickled, annealed | 13.72 x 2.24 mm (¼"nb sch40s) |
| INCOLOY 800HT (32 Ni/21 Cr) | Tube; seamless, cold finished, solution annealed | 26.67 x 3.91 mm (¾"nb sch80s) |
| ALLOY 800HT (32 Ni/21 Cr) | Tube; seamless, cold finished, annealed | 48.26 x 3.68 mm (1 ½"nb Sch40s) |
| ALLOY 800HT (32 Ni/21 Cr) | Tube; seamless, hot finished, pickled, passivated | 114.3 x 6.02 mm (4"nb sch40s) |