Titanium Seamless Tube Manufacturer

ASTM B338 Titanium Heat Exchanger Tubes and Square Tubing supplier in Mumbai, India.


Titanium Seamless Tube are well known for being corrosion resistant, lightweight and strong. The Shear Modulus of Titanium Tubing is 43.0 GPa (6240 ksi) and it has an Elongation at Break of 54%. Titanium Tube manufacturers in India can easily be located online, by running a few relevant searches but before you buy make sure that these are truseted manufacturers in India by asking certificates & client reference list.


Titanium Seamless Tube

Titanium Seamless Tube

Titanium Welded Tube

Titanium Welded Tube

 High Strength Titanium Tubes

High Strength Titanium Tubes

ASTM B338 Titanium Alloy Tubing

ASTM B338 Titanium Alloy Tubing


titanium heat exchanger tubes

titanium seamless tube supplier in india

Searching Titanium Tube suppliers in India? Manufacturer and exporter of Ti alloy Gas Tube and 3 Inch Exhaust Tubing in various sizes and grades in Mumbai.


The Chemical Formula of Titanium is Ti. Titanium exhaust tubing has a Density of 4.50 g/cm3 (0.163 lb/in3). Titanium coil tubing are capable of withstanding high levels of heat and they can withstand even up to 806 degrees of heat, without the loss of their strength. The Boiling Point of Titanium Tube is 3287 °C (5949 °F) and it has a Melting Point of 1650-1670 °C (3000-3040 °F). Titanium seamless tubing are globally used by aerospace engineers and they rely on this kind of tubing to secure various types of aircraft. 

Titanium square tubing has a Tensile Strength of 220 MPa (31900 psi). The Poissons Ratio of Titanium grade 2 tubing is 0.34. Medical grade titanium tubing has a Modulus of Elasticity of 116 GPa (16800 ksi). It has a Brinell Hardness of 70 and a Vickers Hardness of 60.  titanium tubing is used in various things like jewellery, medical objects, a range of industries, architecture, pigments, nuclear waste storage, consumer goods, additives, pigments, coatings and in the marine and aerospace sector too. Any kind of job that calls for it to be tightly fastened, without the addition of too much extra weight to the structure, calls for the use of a 1.375 Id Titanium Tube.


Titanium Welded Tubes Pressure Rating

Titanium Welded Tubes Pressure Rating

ASTM B338 Titanium Square Tubing Tolerance Chart

Normal Pipe Size Tolerance Of ASTM A249 TP316L Tube OD (Outside Daimeter)
+
inches millimeter inches millimeter
1/8~1 1 /2
> 1 1 /2~4
> 4~8
> 8~18
> 18~26
> 26~34
> 34~48
1/64(0.015)
1/32(0.031)
1/16(0.062)
3/32(0.093)
1/8(0.125)
5/32(0.156)
3/16(0.187)
0.4
0.8
1.6
2.4
3.2
4.0
4.8
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
1/32(0.031)
0.8
0.8
0.8
0.8
0.8
0.8
0.8

Different Types Of Titanium Seamless And Welded Tube In Our Stock

  • Titanium Rectangular Tube
  • Titanium Alloy Hollow Tube
  • UNS R56400 Seamless Tube
  • Titanium Alloy Capiilary Tube
  • Titanium Cold Drawn Tube
  • Ti Grade 2 Electropolished Tube
  • small diameter titanium tubing
  • Grade 2 Alloy Round Tube
  • WERKSTOFF NR.3.7165 Titanium Round Tube
  • Grade 2 Ti Round Tube
  • Ti Grade 2 Custom Tube
  • UNS R56400 Thick Wall Tube
  • Ti Grdae 5 Alloy Thick Wall Tube
  • Titanium ERW Tube
  • titanium exhaust tubing
  • titanium square tubing
  • Titanium Gr. 2 Thin Wall Tube
  • Titanium Gr. 5 Thin Wall Tube
  • WERKSTOFF NR. 3.7035 Titanium Round Tube
  • UNS R56400 Rectangular Tube
  • UNS R50400 Seam-Welded Tubing
  • UNS R56400 Oil & Gas Tube
  • ASME SB338 Gr 2 Titanium Round Tubes
  • ASTM B338 Titanium Seamless Tube
  • Gr. 2 Titanium Welded Tube
  • ASTM B338 Outside PolishedTube
  • ASTM B338 U shapedTube
  • ASTM B338 Exhaust Tubing
  • ASTM B338 Titanium Thin Wall Tube

ASME SB338 Titanium Seamless Tubing Size Table

Outside Daimeter (O.D.) In Inches Size Of Wall Thickness Inside Daimeter (I.D.) Weight In (LBS And Foot)
1/8 .016 .093 .0107
1/8 .032 .061 .0183
1/4 .035 .180 .0462
1/4 .058 .134 .0684
1/4 .065 .120 .0739
5/16 .035 .242 .0597
5/16 .065 .182 .0989
3/8 .035 .305 .0731
3/8 .065 .245 .1238
1/2 .035 .430 .1000
1/2 .065 .370 .1737
5/8 .035 .555 .1269
5/8 .049 .527 .1734
5/8 .065 .495 .2237
3/4 .035 .680 .1538
3/4 .065 .620 .2736
7/8 .035 .805 .1807
7/8 .065 .745 .3235
1 .035 .930 .2075
1 .049 .902 .2864
1 .065 .870 .3735
1-1/2 .065 1.370 .5732
2 .035 1.930 .4141
2 .065 1.870 .7690

Size Range Of Titanium Welded Square Tube

O.D. (Outside Daimeter)
(in)
Size Of Wall Thickness .028
(LBS And Foot)
Size Of Wall Thickness .035
(LBS And Foot)
Size Of Wall Thickness .049
(LBS And Foot)
Size Of WallThickness .065
(LBS And Foot)
1/2″ .0812 .1000 .1358
5/8″ .1027 .1269
3/4″ .1242 .1538 .2111
7/8″ .1457 .1807 .2487
1″ .1672 .2075 .2864 .3735
1-1/4″ .2613 .3616 .4733
1-1/2″ .3151 .4369 .5732
2″ .4226 .5875 .7729

Specification of Titanium Tube

Specification Chart Of Titanium Seamless Tube
Type Of Tubes Welded Pipes And Welded Tubes
Type Of Manufacturing CDW, DOM, CEW, Fabricated, ERW, Welded
Outside Diameter Of Tubes 6 to 304.8 mm
Standard GB/ DIN/ EN/ SUS/ JIS/ AISI/ ASTM
Size Range 6.00 millimeter OD up to 914.4 millimeter OD
Thickness Size: 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
Length Within 13500mm (millimeter
Get instant delivery of Titanium Tubing In Below City Noida, Visakhapatnam, Vasai-Virar, Pimpri-Chinchwad, Dammam, Hazira, Beijing, Ludhiana, Hyderabad, Kochi, Jakarta, Ashburn, Brisbane, Tiruchirappalli, Al-Jubail, Gurgaon, Jeddah, London, Jamnagar, Bengaluru, Busan, Hangzhou, Nashik, Faridabad, New-Delhi, Patna, Riyadh, Amsterdam, Puchong, Thane, Bhubaneswar, Bhopal, Lucknow, Ambernath, Chandigarh, Agra, Houston, Seoul, Chennai, Bogota, Karachi, Vadodara, Tehran, Ajman, Sharjah, Sydney, Oyama, Vapi, Nagpur, Dallas, Shanghai, Ahmedabad, Paris, Doha, Baku, Kota, Manama, Rajkot, Bangkok, Cairo, Hanoi, Surat, Perth, Mexico-City, Mumbai, Ankleshwar, Ghaziabad, Madrid, Lagos, Abu-Dhabi, Jamshedpur, Kalyan, Navi-Mumbai, Santiago, Secunderabad, Calgary, Panipat, Kuala-Lumpur, Melbourne, Dubai, Johor-Bahru, Istanbul, Coimbatore, Batam, Dombivli, Shah-Alam, Dhaka, Al-Khobar, Mysuru, Quezon-City, Vung-Tau, Guwahati, Chicago, Sao-Paulo, Ho-Chi-Minh-City, Pune, Jaipur, Zhengzhou, Delhi, Milan, Kolkata, Alexandria, Surabaya, Singapore, Indore, Raipur,

Stockist & supplier of 2.5, 1.375 Id Titanium Tube and Box Section in India, buy at best price ex Mumbai.


Titanium Tube Price In India

Outside Daimeter : 0.25", Wall Thickness: 0.035", Inside Daimeter : 0.18" Price In INR Per Foot
12" (1 foot) 2045.61
24" (2 foot) 3938.53
36" (3 foot) 5539.22
48" (4 foot) 6564.95
60" (5 foot) 7795.24

Largest Supplier Of Small-Quantity Titanium Seamless Tube in India. For final Titanium Welded Tube Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.



Chemical Equation Of High Strength Titanium Tubes

Grade Ti C Fe H N O Al V
Titanium Seamless Grade 2 Tube 99.2 minimum 0.1 maximum 0.3 maximum 0.015 maximum 0.03 maximum 0.25 maximum - -
Titanium Seamless Grade 5 Tube 90 minimum - 0.25 maximum - - 0.2 maximum 6 min 4 min

Available titanium tube weight calculator here, Always check Titanium Exhaust Tube Tolerances before buying Material.

Mechanical Strength Of ASTM B338 Titanium Heat Exchanger Tube

Element Of Titanium Seamless Tube Density Yield Strength (0.2%Offset) Elongation Melting Point Tensile Strength
Titanium Seamless Gr. 2 Tube 4.5 g/cm3 Psi - 39900 , MPa - 275 20 % 1665 °C (3030 °F) Psi - 49900 , MPa - 344
Titanium Seamless Gr. 5 Tube 4.43 g/cm3 Psi - 128000 , MPa - 880 14 % 1632 °C (2970 °F) Psi - 138000 , MPa - 950

Ti Welded Tube Material Equivalent

STANDARD UNS WERKSTOFF NR.
Titanium Welded Gr. 2 Tube R50400 3.7035
Titanium Welded Gr. 5 Tube N56400 3.7165

Titanium Alloy Tubing Size Chart

Wall Thickness Of Alloy C22 Seamless Tube Size Of Hastelloy C22 Seamless Tube (Outside Daimeter) In Inches
.010 1/16 Inch , 1/8 Inch , 3/16 Inch
.020 1/16 Inch , 1/8 Inch , 3/16 Inch , 1/4 Inch , 5/16 Inch , 3/8 Inch
.012 1/8 Inch
.016 1/8 Inch , 3/16 Inch
.028 1/8 Inch , 3/16 Inch , 1/4 Inch , 5/16 Inch , 3/8 Inch , 1/2 Inch , 3/4 Inch , 1 Inch , 1 1/2 Inch , 2 Inch
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"

Check Ti Alloy Erw Tube Dimensions, Titanium Ncf Tubes can be manufactured as required with short lead times, Download ASTM B338 PDF.

Titanium Tube Dimensions

Dimensions Of Tube Wall Thickness Weight Table Dimensions Of Tubes Wall Thickness Weight Table
(millimeter) (millimeter) metre (kilogram) (millimeter) (millimeter) metre (kilogram)
12.7 x 12.7 1.20 0.44 40 x40 1.20 1.49
12.7 x 12.7 1.50 0.55 40 x40 1.50 1.85
15 x 15 1.20 0.53 40 x40 2.00 2.45
15 x 15 1.50 0.65 40 x40 3.00 3.75
20 x 20 1.20 0.71 50 x50 1.50 2.32
20 x 20 1.50 0.88 50 x50 2.00 3.08
20 x 20 2.00 1.19 50 x50 3.00 4.65
25 x 25 1.20 0.92 60 x60 2.00 3.71
25 x 25 1.50 1.14 60 x60 3.00 5.49
25 x 25 2.00 1.49 70 x70 3.00 6.53
25 x 25 3.00 2.20 80 x80 2.00 4.98
30 x 30 1.20 1.10 80 x80 3.00 7.53
30 x 30 1.50 1.37 100 x 100 2.00 6.40
30 x 30 2.00 1.84 100 x 100 3.00 9.53
30 x 30 3.00 2.72

Titanium Box Section Weight Chart In Inches

Outer/Daimeter Wall Thickness Weight Outer/Daimeter Wall Thickness Weight
(Inches) (millimeter) metre (Kilogram) (Inches) (millimeter) metre (Kilogram)
1/2 1.50 0.42 1 1/4 1.50 1.13
5/8 1.20 0.44 1 3/8 1.20 1.02
5/8 1.50 0.54 1 1/2 1.20 1.11
3/4 1.20 0.53 1 1/2 1.50 1.38
3/4 1.50 0.66 1 1/2 2.00 1.81
3/4 1.20 0.63 1 3/4 1.50 1.62
7/8 1.50 0.78 2 1.20 1.49
7/8 2.00 1.01 2 1.50 1.85
1 1.20 0.73 2 2.00 2.40
1 1.50 0.90 2 1/2 1.50 2.34
1 2.00 1.17 3 1.50 2.81
1 1/8 1.50 1.02 4 3.00 7.41
1 1/4 1.20 0.92

Check Availability Of Titanium Seamless Tube

Od50.8 X Thk0.9 X 3000mm Titanium Seamless Tube

Od50.8 X Thk0.9 X 3000mm Titanium Seamless Tube

Ti Round Tube

Ti Round Tube

Titanium Tubing Round 3al-2.5v Mms 1205 .5000 X .0260

Titanium Tubing Round 3al-2.5v Mms 1205 .5000 X .0260

Titanium Exhaust Tubes

Titanium Exhaust Tubes

Titanium Alloy High Pressure Tube

Titanium Alloy High Pressure Tube

Titanium Alloy Cdw Tube

Titanium Alloy Cdw Tube

Ti Hydraulic Tubing

Ti Hydraulic Tubing

Ti Super Alloy Thin Wall Tubing

Ti Super Alloy Thin Wall Tubing


Know More About Our Clients Worldwide

United Kingdom -UK, China, Chile, South Africa Titanium Seamless Tube
UK, Philippines, United Arab Emirates (UAE), Bahrain Titanium Tubing
Philippines, Malaysia, Netherlands ASTM B338 Ti Alloy Welded Tube
Europe, Sweden, Egypt, Oman High Purity Titanium Seamless Tube
Spain, Malaysia, Australia, Germany B338 Titanium Alloy Seamless Tubing
Europe, Singapore, Malaysia, USA ASTM B338 Ti Heat Exchanger Tubes
Canada, Japan, Italy, Saudi Arabia (KSA) Ti Tube
Malaysia, Colombia, Turkey, South Africa Ti Square Tube
Mexico, Taiwan, Malaysia, Thailand Ti Alloy Tubing
Malaysia, South Korea, UK, Bangladesh TI Box Section
Poland, Romania, Singapore, Kuwait Ti Gas Tube
Canada, Malaysia, Iran, Singapore Ti Square Tubing
Singapore, Los Alamos -Mexico, Norway, Finland Ti ERW Tube
Ellington -United States, NY 12203 (USA), Russia, Brazil ASTM B338 Ti Thin Wall Tube
Singapore, Dammam -KSA, Hong Kong, UAE UNS R50400 Seam-Welded Tubing