As Titanium Pipe Manufacturers Siddhagiri Metals & Tubes supply Titanium Pipes to leading Oil & Gas industry fabricators to build heat exchangers, air-coolers and other process equipments. Depending upong the requirement of your projects we can supply with ASTM/ASME or NORSOK M630 specifications. Titanium Alloy Pipe are available in both Seamless as well as Welded types, manufactured to the ASTM/ASME specifications in a wide variety of sizes. We are largest stockist of Titanium Square Pipe, SCH40 Titanium Pipe, Titanium Alloy Clad Pipe, Titanium Straight Pipes and Titanium Alloy Thin Wall Pipe.Contact Siddhagiri Metals & Tubes today to choose the right supplier of Titanium Polished Pipe nearby in your country. We have huge stock of Titanium Round Pipe for quick delivery in your country. We are also specialise in providing highest quality Titanium Alloy Pipes that mean you will no longer need to.
Table of Content
Astm B861 Titanium Seamless Pipe
and its alloys possess tensile strengths from 30,000 psi to 200,000 psi (210-1380 MPa), which are equivalent to those strengths found in most of alloy steels. The density of Titanium Welded Pipe is only 56 percent that of steel, and its corrosion resistance compares well with that of platinum. Of all the elements in the earth's crust, SCH40 Titanium Pipe is the ninth most plentiful. Titanium Alloy Pipe
has a high melting point of 3135°F (1725°C). Titanium Round Pipe melting point is approximately 400°F (220°C) above the melting point of steel and approximately 2000°F (1100°C) above that of aluminium.\Gr9 Titanium Alloy Pipe.Titanium alloys piping material have wider application in general, especially when alloyed with small amount of aluminium and vanadium, with weight ratio of 6% and 4% respectively. 3 Inch Titanium Exhaust Pipe
is lightweight, strong, corrosion resistant and abundant in nature.
we are largest Titanium Pipe suppliers
ASTM / ASME Standards | ASTM B161 / ASME SB161 |
---|---|
EFW Pipe size | 5.0 mm - 1219.2 mm |
Pipe Schedule | SCH5, SCH10, SCH40, STD, SCH80, SCH160 |
Pipe Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
Pipe Form | Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc. |
Pipe Length | Single Random, Double Random & Cut Length. |
End | Plain End, Beveled End, Treaded. |
Marking | All Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 |
Iran, Philippines, Canada, Chile | Stainless Steel Pipes Plated with Titanium and tube |
Norway, Europe, Romania, United Arab Emirates (UAE) | ASTM B861 Grade 12 Round Seamless Titanium Pipe for Industrial |
Russia, Netherlands, Malaysia, Sweden | Seamless Titanium Pipe ASME Sb861, ASME Sb338 |
Mexico, Malaysia, Los Alamos -Mexico, Egypt | ASTM-B338 ASTM-B861 Titanium Pipes |
Malaysia, Singapore, NY 12203 (USA), United Kingdom -UK | ASTM B338 Industrial Titanium Pipe (Gr2, GR5) |
Poland, Dammam -KSA, Philippines, UK | Medical Application Ta9 / Gr7 0.5-2mm Wall Thickness Titanium Welded Seamless Alloy Steel Pipe |
Singapore, Qatar, Malaysia, Europe | Various Size Micro Titanium Alloy Pipe |
Japan, Czechia, Jakarta, Malaysia, Thailand | ASTM B338 Alloy Grade Seamless Titanium Pipes |
Malaysia, Bangladesh, China, Colombia | Black Titanium Welded Color Stainless Steel Pipe |
Taiwan, South Africa, Kuwait, Philippines | Small Diameter Gr1 Titanium Exhaust Pipe |
South Korea, Bahrain, Singapore, Malaysia | Gr1 60mm 70mm 76mm 80mm 89mm Thin Wall Titanium Pipe for Titanium Exhaust Pipe |
Indonesia, Philippines, UK, Belgium | Titanium Welded Pipe (Grade 12) |
France, Oman, Hong Kong, Thailand | Customized Ti Pipes |
Germany, Malaysia, Turkey | Pure Titanium Seamless Pipe |
USA, Dubai, Malaysia, Finland | Acid Shell Tube Heat Exchanger Titanium Pipe in PP Evaporator |
Saudi Arabia (KSA), UK, Spain, Brazil | Explosion Welded Titanium or Titanium Alloy Pipe Petrochemical Industry |
South Africa, UAE, Europe, Singapore | Industrial Product Titanium Pipe Gr12 |
Australia, Ellington -United States, Canada, Nigeria | ASTM 2063 Titanium Material Nitinol Pipe |
Malaysia, Singapore, Italy, UAE | ASTM B861 Round Seamless Titanium Pipe for Industrial |
Titanium Seamless Pipe Price in India | PACK QTY | PRICE |
---|---|---|
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x500mm | 1 | £60.00 |
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x500mm | 2 | £120.00 |
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x500mm | 3 | £145.00 |
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x500mm | 4 | £180.00 |
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x500mm | 5 | £200.00 |
Price of Titanium Pipe 3.0mm dia x 0.50mm wall x500mm | 1 | £75.00 |
Price of Titanium Pipe 3.0mm dia x 0.50mm wall x500mm | 2 | £140.00 |
Price of Titanium Pipe 3.0mm dia x 0.50mm wall x500mm | 3 | £188.00 |
Price of Titanium Pipe 3.0mm dia x 0.50mm wall x500mm | 4 | £240.00 |
Price of Titanium Pipe 3.0mm dia x 0.50mm wall x500mm | 5 | £264.00 |
Price of Titanium Pipe 3.0mm dia x 0.50mm wall x2000mm | 1 | £130.00 |
Price of Titanium Pipe 3.0mm dia x 0.50mm wall x2000mm | 3 | £400.00 |
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x1000mm | 1 | £99.00 |
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x1000mm | 3 | £2205.00 |
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x1000mm | 5 | £300.00 |
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x2000mm | 1 | £145.00 |
Price of Titanium Seamless Pipe 1/4"(13.72mm) NBxSch10/10s(1.65mm) wall x2000mm | 3 | £300.00 |
Titanium grade Pipe | Description |
---|---|
Pipe Ti Grade 1 (CP Ti) | Relatively low-strength and high-ductility pure titanium (Cp). |
Pipe Ti Grade 2 (CP Ti) | Medium-strength pure titanium (Cp). |
Pipe Ti Grade 3 (CP Ti) | High strength pure titanium (Cp). |
Pipe Ti Grade 5 | |
Pipe Ti Grade 7 | Medium-strength Pd-alloyed titanium for enhanced corrosion properties. |
Pipe Ti Grade 9 | High-strength titanium alloyed with 3% Al and 2.5% V. |
Pipe Ti Grade 11 | Low-strength titanium plus 0.12-0.25% Pd for enhanced corrosion properties. |
Pipe Ti Grade 12 | High-strength titanium alloy plus 0.3% Mo and 0.8% Ni for enhanced corrosion properties. |
Pipe Ti Grade 16 | Medium-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties. |
Pipe Ti Grade 17 | Low-strength titanium plus 0.04-0.08% Pd for enhanced corrosion properties. |
Pipe Ti Grade 26 | Medium-strength titanium plus 0.08-0.14% Ru for enhanced corrosion properties. |
Pipe Ti Grade 28 | High-strength titanium alloy plus 3% Al, 2.5% V and 0.08%-0.14% Ru for enhanced corrosion properties. |
ASTM B337 Titanium Pipe
Ti Pipes
ASME SB337 Ti Pipe
Ti Alloy Welded Pipe
ASTM B337 Titanium Seamless Pipes
Titanium Alloy Pipe
Titanium ERW Pipe
ASME SB337 Titanium EFW Pipe
Titanium Gr 2 | C | Ti | N | Fe | H | O | V | Al |
0.1 max | 99.2 min | 0.03 max | 0.3 max | 0.015 max | 0.25 max | – | – | |
Titanium Gr 5 | C | Ti | N | Fe | H | O | V | Al |
0.10 max | 90 min | 0.05 max | 0.40 max | 0.015 max | 0.20 max | 3.5-4.5 | 5.5-6.75 max |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation | |
Titanium Grade 2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 39900 , MPa – 275 | Psi – 49900 , MPa – 344 | 20 % |
Titanium Grade 5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 128000 , MPa – 880 | Psi – 138000 , MPa – 950 | 14 % |
STANDARD | UNS | WERKSTOFF NR. |
Titanium Gr 2 | R50400 | 3.7035 |
Titanium Gr 5 | R56400 | 3.7165 |
1/8" IPS (.405" O.D.) | Sch 40, Sch 80 |
1/4" IPS (.540" O.D.) | Sch 10,Sch 40, Sch 80 |
3/8" IPS (.675" O.D.) | Sch 10,Sch 40, Sch 80 |
1/2" IPS (.840" O.D.) | Sch 5, Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
3/4" IPS (1.050" O.D.) | Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
1" IPS: (1.315′ O.D.) | Sch 5, Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
1-1/4" IPS (1.660" O.D.) | Sch 5, Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
1" IPS: (1.315′ O.D.) | Sch 5, Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
1-1/4" IPS (1.660" O.D.) | Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
1-1/2" IPS (1.900" O.D.) | Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
2" IPS (2.375" O.D.) | Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
2 1/2" IPS (2.875" O.D.) | Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
3" IPS ( 3.500" O.D.) | Sch 5, Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
3 1/2" IPS ( 4.000" O.D.) | Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
4" IPS (4.500" O.D.) | Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
5" IPS ( 5.563" O.D.) | Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
6" IPS (6.625" O.D.) | Sch 5, Sch 10,Sch 40, Sch 80,Sch 160,Sch XXH |
8 ” IPS (8.625" O.D.) | Sch 5, Sch 10,Sch 40, Sch 80,Sch 120,Sch 140,Sch 160,Sch XXH |
10" IPS (10.750" O.D.) | Sch 10,Sch 20, Sch 40,SCH 80 (.500),TRUE 80(.500) |
12" IPS (12.750" O.D.) | SCH 10, SCH 20,SCH40(.375),TRUE40(.406),SCH80(.500),SCH80(.500) |
14" IPS (14.000" O.D.) | SCH10 (.188), SCH40 (.375) |
16" IPS (16.000" O.D.) | SCH40(.188), SCH40(.375) |
18" IPS (18.000" O.D.) | SCH-40 (.375) |
Tube O.D., (in.) | Wall Thickness of Tube (inches) | |||||||
---|---|---|---|---|---|---|---|---|
.028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
Working Pressure (psig) | ||||||||
1/8 | 7900 | 10100 | ||||||
1/4 | 3700 | 4800 | 7000 | 9500 | ||||
5/16 | 3700 | 5400 | 7300 | |||||
3/8 | 3100 | 4400 | 6100 | |||||
1/2 | 2300 | 3200 | 4400 | |||||
3/4 | 2200 | 3000 | 4000 | 4600 | ||||
1 | 2200 | 2900 | 3400 | 3900 | 4300 |
|
|
Product Description | Outside Diamter, OD (in mm) | Wall Thickness, WT (in mm) |
Titanium Colour Coated Pipe | 6mm to 630mm | 0.5mm-30mm |
Titanium Square Pipe | 12.7mm* 12.7mm to 300mm* 300mm | 0.5mm-30mm |
Titanium Round Pipe | 6mm – 630mm | 0.5mm-30mm |
Titanium Rectangular Pipe | 10*20mm to 100*200mm | 0.5mm-30mm |
Titanium Electropolished Pipe | 12.7mm to 250mm | 0.5mm-30mm |
Titanium Ornamental Pipe | 12.7mm to 76.2mm | 0.5mm-2.0mm |
Titanium Slot Round Pipe | 12.7mm to 76.2mm | 0.5mm-2.0mm |
Titanium Hexagonal Pipe | 13mm to 85mm | 0.5mm-2.0mm |
Titanium Triangle Pipe | 16mm to 85mm | 0.5mm-3.0mm |
Titanium Handrail Pipe | – | 0.5mm-2.0mm |
Titanium Thin-Wall Pipe | 22mm*0.7mm to 108mm*2.0mm | 0.5mm-2.0mm |
Titanium U Shaped Pipe | 20mm to 200mm | 0.5mm-2.0mm |
Titanium Capillary Pipe | 0.28mm to 10mm | 0.08mm – 1.2mm |
Titanium Inner/Outside Polished Pipe | 12.5mm to 203.2mm | 1.0mm – 5mm |
atomic number | 22 |
---|---|
atomic weight | 47.867 |
melting point | 1,660 °C (3,020 °F) |
boiling point | 3,287 °C (5,949 °F) |
density | 4.5 g/cm3 (20 °C) |
oxidation states | +2, +3, +4 |
electron configuration | [Ar]3d24s2 |
Specific heat capacity (J kg−1 K−1) |
524 | Young's modulus (GPa) | 115.7 | |||||||||||
Shear modulus (GPa) | 43.8 | Bulk modulus (GPa) | Unknown | |||||||||||
Vapour pressure | ||||||||||||||
Temperature (K) |
|
|||||||||||||
Pressure (Pa) |
|
Surface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
---|---|---|---|---|---|
Roughness Average(RA) | Roughness Average(RA) | ||||
μ inch | μm | μ inch | μm | ||
AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
Nominal pipe size up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / - 0.79 mm 10 thru 18 = + 2.37 mm / - 0.79 mm | 20 thru 24 = + 3.18 mm / - 0.79 mm |
||
Wall Thickness All Diameters = - 12.5% + tolerance not specified |
Length + 6.40 mm / - 0 mm |
Weight Weight = + 10% / - 1.5% |