Inconel Pipe

Manufacturer and supplier of Inconel Alloy Seamless And Welded Pipe with Exceptional Sizes, Standard, Price And Quality In India

Inconel Pipe

 

Always check ASME SB725 Incoloy Thick and Thin Wall Pipe thickness and schedule/ weight chart before buying material

Inconel pipe & Incoloy Seamless Pipe are made of quality resistance substance that is able to resist high temperatures and pressures. Used in various industries, these pipes are made of Inconel alloys that form an outside layer protecting the pipe from any sort of corrosion. The Inconel pipe is available in two types, the Inconel Alloy Annealed Pipe and the Hot Finished Inconel Pipe achieved through inconel pipe welding process. we are one of the oldest Inconel Pipe Suppliers

This can be achieved best by using Inconel metal as it can be easily welded with other materials. You can even weld the same with steel and other different materials. SMT is leading manufacturer & supplier of Inconel Seamless Pipe. We are PED approved trader & stockholder of Sch40 Inconel Pipe. SMT is well known saudi aramco approved exporter & distributor of Inconel Clad Pipe. SMT is stockist of Inconel Alloy thin Wall Pipe, Inconel Round Pipe.

Table of Content


Inconel Pipe
Inconel Pipe
Inconel Seamless Pipe
Inconel Seamless Pipe
Inconel Welded Pipe
Inconel Welded Pipe

Spec Chart of Inconel Pipe

ASTM / ASME Standards ASTM B163 / ASME SB163
EFW Pipes size 5.0 mm - 1219.2 mm
Pipes Schedule SCH5, SCH10, SCH40, STD, SCH80, SCH160
Pipes Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Pipes Form Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipess Etc.
Pipes Length Single Random, Double Random & Cut Length.
End Plain End, Beveled End, Treaded.
Marking All Pipess are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
Welded Tube Size 6.35 mm OD To 152 mm OD
Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
tubing wall thickness 0.020" –0.220", (special wall thicknesses available)
tube Length Single Random, Double Random, Standard & Cut length
Tube Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
tube Form Round, Coil, Square, Rectangular, Boiler, Hydraulic, Straight or ‘U’ bent Tubes, Hollow, LSAW Tubes Etc.
Tube Type Seamless, ERW, EFW, Welded, Fabricated
End Plain End, Beveled End, Treaded
Marking All tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Application Oil Tube, Gas Tube, Fluid Tube, Boiler and Heatexchanger

 

ASTM B163 Inconel Pipe Price

Inconel Pipe Material Price
Inconel Pipes 1/4"(13.72mm) NB x Sch10/ 10s (1.65mm) wall x500mm £120.00
Inconel Pipes 1/4"(13.72mm) NB x Sch10/ 10s (1.65mm) wall x500mm £90.00
Inconel Seamless Pipes 1/4"(13.72mm) NB x Sch10/ 10s (1.65mm) wall x500mm £144.00
Hot Finished Inconel Pipes 1/4"(13.72mm)NB x Sch10/ 10s (1.65mm) wall x500mm £180.00
Inconel Clad Pipes 1/4"(13.72mm)NB x Sch10/ 10s (1.65mm) wall x500mm £220.00

 

Most popular countries buy Inconel Pipe from us,

Inconel Alloy 601 Pipe Cold Drawing Bright Surface Iran, Philippines, Chile, Canada
Inconel 740 Alloy Steel Pipes Romania, Norway, United Arab Emirates (UAE), Europe
Nickel Based Alloy Seamless Pipes Russia, Brazil, Netherlands, Malaysia, Sweden
Inconel X750/N07750 Oxidation Resistant Stainless Steel PipeLos Alamos -Mexico, Egypt, Mexico, Malaysia
Cold Rolled ASTM DIN JIS Inconel Seamless Steel Pipes NY 12203 (USA), United Kingdom -UK, Malaysia, Singapore
ASTM B622 Inconel 718 Seamless Pipes Dammam -KSA, UK, Poland, Philippines
Inconel 713 Metal Monel Alloy Pipes Europe, Singapore,  Malaysia, Qatar
Forging Filler Metal Inconel Pipes with Thick Wall Thailand, Malaysia, Japan, Czechia
Inconel 718 Seamless Pipes (FM33) China, Colombia, Bangladesh, Malaysia
Fluid Seamless Alloy Steel Pipe Inconel 601, 617, 609South Africa, Kuwait, Taiwan, Philippines
Oxidation Temperature U Bends Inconel Pipes Singapore, Malaysia, South Korea, Bahrain
Inconel 617 2.4663 Alloy Round Pipe B564UK, Belgium, Indonesia, Philippines
Inconel 713c/N07713 Cold Rolled Stainless Steel PipeHong Kong, Thailand, France, Oman
Inconel X-750 Pipe for Spring Seal Ring ApplicationTurkey, Malaysia, Germany
Inconel Nickel Alloy Seamless Round Tube Hollow PipeMalaysia, Finland, USA, Dubai
Cold Rolled Inconel Pipe for Flue Gas Desulphurization SystemSpain, Brazil, Saudi Arabia (KSA), UK
ASTM B167 Inconel 601 Nickel-Based Alloy Seamless PipeEurope, Singapore, South Africa, UAE

 

Inconel Pipe Suppliers

ASTM B167 Inconel Alloy Custom Pipes

ASTM B167 Inconel Alloy Custom Pipes

Cold Drawn inconel Seamless Pipes

Cold Drawn inconel Seamless Pipes

inconel Hollow Pipes

inconel Hollow Pipes

Inconel Alloy Rectangular Pipes

Inconel Alloy Rectangular Pipes

ASME SB167 inconel Round Pipes

ASME SB167 inconel Round Pipes

Inconel Alloy Square Pipes

Inconel Alloy Square Pipes

Incoloy Welded Pipes

Incoloy Welded Pipes

ASTM B167 inconel Seamless Pipes

ASTM B167 inconel Seamless Pipes

 

Physical Properties of Inconel Seamless Pipe

  Metric Physical Properties English
Alloy 6258.44 g/cc Density 0.305 lb/in³
Alloy 600 8.47 g/cc Density 0.306 lb/in³
Alloy 7188.19 Density 0.296 lb/in3 (8.192 g/cm3)

 

If you need schedule 40 Inconel Hexagonal Pipe, We can supply in nearly any size, no matter how small the size or quantity.

 

Inconel Welded Pipe Electrical Conductivity

MATERIAL CONDUCTIVITY RESISTIVITY NOTES
(% IACS) (Siemens/m) (Ohm-m) conductivity converted from resistivity

Alloy 617

1.41

1.220E-06

Alloy 600

1.67

1.030E-06

Alloy 600

1.70

9.860E+05

1.014E-06

Alloy 601

1.45

1.190E-06

Alloy 690

11.65

1.480E-07

Alloy 625

1.34

1.290E-06

Alloy X750

1.41

1.220E-06

Alloy 718

1.38

1.250E-06

 

Inconel Pipe Hardness

MATERIAL HARDNESS HB
600 Tube and Pipe
 88B maximum

 

We have a large inventory of Inconel Alloy Hollow Pipe in almost all length, call us to know more about Ready stock and updated price list

 

Inconel Alloy Seamless Pipe Schedule chart

NPS SCH 0S Outside Diameter (Mm) SCH 80S XS STD SCH 40S SCH 160 SCH 120 XXS
1/4" 1.0065
0.0048		 13.0072 3.0002
0.0081		 2.0024
0.0064
3/8" 1.0065
0.0064		 17.0015 3.0020
1.0012		 2.0031
0.0086
1/8" 10.0029 2.0041
0.0048		 1.0073
0.0037
1/2" 2.0011
1.0001		 21.0034 3.0073
1.0064		 2.0077
1.0029		 4.0076
1.0098		 7.0047
2.0065
3/4" 2.0011
1.0030		 26.0067 3.0091
2.0023		 2.0087
1.0071		 5.0056
2.0094		 7.0082
3.0069
1" 2.0077
2.0012		 33.0040 4.0055
3.0028		 3.0038
2.0054		 6.0035
4.0030		 9.0009
5.0075
1 1/2" 2.0077
3.0015		 48.0026 5.0008
5.0049		 3.0068
3.0011		 7.0014
7.0034		 10.0016
9.0069
2" 2.0077
3.0098		 60.0033 5.0054
7.0059		 3.0091
5.0052		 8.0074
11.0028		 11.0007
13.0065
2 1/2" 3.0005
5.0034		 73.0003 7.0001
11.0058		 5.0016
8.0076		 9.0053
15.0014
1 1/4" 2.0077
2.0073		 42.0016 4.0085
3.0053		 3.0056
3.0043		 6.0035
5.0069		 9.0070
7.0088
3" 3.0005
6.0054		 88.0090 7.0062
15.0050		 5.0049
11.0045		 11.0013
21.0065		 15.0024
28.0009
4" 3.0005
8.0048		 114.0030 8.0056
22.0065		 6.0002
16.0031		 13.0049
34.0002		 11.0013
28.0032		 17.0012
41.0063
5" 3.0040
11.0074		 141.0060 9.0052
31.0041		 6.0055
22.0010		 15.0088
49.0083
10" 4.0019
28.0020		 273.0005 12.0070
81.0055		 9.0027
61.0020		 28.0058
174.0082
6" 3.0040
14.0004		 168.0026 10.0097
43.0019		 7.0011
28.0068		 18.0026
68.0056		 14.0027
54.0020		 21.0095
80.0036
3 1/2" 3.0005
7.0052		 101.0060 8.0008
18.0090		 5.0074
13.0077
8" 3.0076
20.0025		 219.0008 12.0070
65.0059		 8.0018
43.0016		 18.0026
90.0044		 23.0001
112.0090
12" 4.0057
36.0053		 323.0085 12.0070
97.0046		 9.0053
74.0092

 

Incoloy Thick And Thin Wall Pipe Sizes

OD
mm
Pipe WT
mm
in.
Sch
Kg/m
13.72
1.65
1/4
10S
0.50
13.72
2.24
1/4
40S
0.64
13.72
3.02
1/4
80S
0.81
17.15
1.65
3/8
10S
0.64
17.15
2.31
3/8
40S
0.86
17.15
3.20
3/8
80S
1.12
21.34
2.11
1/2
10S
1.02
21.34
2.77
1/2
40S
1.29
21.34
3.73
1/2
80S
1.65
26.67
2.11
3/4
10S
1.30
26.67
2.87
3/4
40S
1.71
26.67
3.91
3/4
80S
2.23
33.40
2.77
1
10S
2.13
33.40
3.38
1
40S
2.54
33.40
4.55
1
80S
3.29
33.40
6.352)
1
160
4.30
42.16
2.77
1¼
10S
2.73
42.16
3.56
1¼
40S
3.44
42.16
4.85
1¼
80S
4.53
42.16
6.352)
1¼
160
5.69
48.26
2.77
1½
10S
3.16
48.26
3.68
1½
40S
4.11
48.26
5.08
1½
80S
5.49
60.33
2.77
2
10S
3.99
60.33
3.91
2
40S
5.52
60.33
5.54
2
80S
7.60
60.33
8.742)
2
160
11.29
73.03
3.05
2½
10S
5.35
73.03
5.16
2½
40S
8.77
73.03
7.01
2½
80S
11.59
88.90
3.05
3
10S
6.56
88.90
5.49
3
40S
11.47
88.90
7.62
3
80S
15.51
88.90
11.132)
3
160
21.67
101.60
3.05
3½
10S
7.53
101.60
5.74
3½
40S
13.78
101.60
8.08
3½
80S
18.92
114.30
3.05
4
10S
8.50
114.30
6.02
4
40S
16.32
114.30
8.56
4
80S
22.67
114.30
13.492)
4
160
34.05
141.30
6.55
5
40S
22.10
141.30
9.53
5
80S
31.44
141.30
15.882)
5
160
49.87
168.28
3.4
6
10S
14.04
168.28
7.11
6
40S
28.69
168.28
10.97
6
80S
43.21
168.28
14.27
6
120
54.75
168.28
18.262)
6
160
68.59
219.08
8.18
8
40S
43.20
219.08
12.7
8
80S
65.63
219.08
18.23
8
120
91.30
219.08
23.012)
8
160
112.97

 

Heat Treatment of Inconel ERW Pipe

Heat Treatment Alloy 625 Combination 625 has three essential warm medicines:, (1) High Arrangement Temper – 2000/2200°F (1093/1204°C), discuss extinguish or speedier., (2) Low Arrangement Anneal – 1700/1900°F (927/1038°C), discuss extinguish or speedier., (3) Stretch Relieve – 1650°F (899°C), discuss extinguish.
Heat Treatment Alloy 600 Alloy 600 isn't an age solidifying alloy; cold working is the as it were accessible implies of solidifying. Softening by tempering starts at almost 1600°F (871°C), and is sensibly total after 10 to 15 minutes of warming at 1800°F (982°C). Over this temperature, grain development may be frightful, in spite of the fact that exceptionally brief warming at 1900°F will cause total softening without undue grain development. Since the rate of cooling has no impact on the softening, the fabric may be water extinguished or discuss cooled.
Heat Shield (2200 deg F continuous).

 

find here Incoloy Seamless Pipe Material Composition, Specification and Dimensions table

 

Inconel Pipe Stock

Trade Name ASTM/ ASME / UNS
(600)ASTM B167 UNS N06600
(601)ASTM B167 UNS N06601
(N06603)ASTM B167 UNS N06603
(N06690)ASTM B167 UNS N06690
(N06693)ASTM B167 UNS N06693
(N06025)ASTM B167 UNS N06025
(N06045)ASTM B167 UNS N06045
(N06696)ASTM B167 UNS N06696
(600)ASTM B163 UNS N06600
(601)ASTM B163 UNS N06601
(690)ASTM B163 UNS N06690

 

Melting Point of Inconel Seamless Pipe

Melting Range of Alloy 600 English: 2470 – 2580 °F, Metric: 1354 – 1413 °C
Melting Range of Alloy 718 Solution Treated and Aged: 1370-1430°C, Solution Treated: 2500-2600°F
Melting Range of Alloy 625 (1280 – 1350°C) 2350 – 2460°F

 

Inconel Pipe grades

Industry standard DIN UNS EN AMS ASTM Others
Alloy 752.4951N06075NiCr20Ti–––
Alloy 725–N07725––B637, B805–
Alloy 718 (API)2.4668N07718––––
Alloy 7182.4668N07718NiCr19NbMo/NiCr19Fe19Nb5Mo35662B637–
Alloy 6252.4856N06625NiCr22Mo9Nb5666B446-03 G1–
Alloy 6172.4663aN06617NiCr23Co12Mo–B166–
Alloy 6022.4633N06025NiCr25FeALY–––
Alloy 6012.4851N06601NiCr23Fe–––
Alloy 6002.4816N06600NiCr15Fe–––

 

Weight Chart of Inconel Pipe

NPS (Normal Pipe Size)
Weight In KG
Wall Thickness Of Inconel Seamless Pipe
OD (Outside Diameter)
Weight IN LBS
Schedule
Millimeter
Inches
Millimeter
Inches
Kilogram/Meter
LBS/Foot
1/2" 40 STD 2.0769 0.0109 21 0.0840 1.0268 0.0851
80 STD 3.0734 0.0147 1.0621 1.0088
3/4" 40 STD 2.0870 0.0113 27 1.0050 1.0684 1.0131
80 STD 3.0912 0.0154 2.0195 1.0474
1" 40 STD 3.0378 0.0133 33 1.0315 2.0501 1.0679
80 STD 4.0547 0.0179 3.0325 2.0172
1 1/4" 40 STD 3.0556 0.0140 42 1.0660 3.0385 2.0273
80 STD 4.0851 0.0191 4.0464 2.0997
1 1/2" 40 STD 3.0683 0.0145 48 1.0900 4.0048 2.0718
80 STD 5.0080 0.0200 5.0409 3.0361
2" 40 STD 3.0912 0.0154 60 2.0375 5.0441 3.0653
80 STD 5.0537 0.0218 7.0480 5.0022
2 1/2" 40 STD 5.0516 0.0203 73 2.0875 8.0629 5.0793
80 STD 7.0010 0.0276 11.0411 7.0661
3" 40 STD 5.0486 0.0216 89 3.0500 11.0284 7.0576
80 STD 7.0620 0.0300 15.0272 10.0253
4" 6.0020 0.0237 114 4.0500 16.0073 10.0790
8.0560 0.0337 22.0318 14.0983
6" 4.0775 0.0188 168 6.0625 19.0252 12.0924
5.0516 0.0203 20.0739 13.0923
5.0563 0.0219 22.0318 14.0983
6.0350 0.0250 25.0354 17.0021
40 STD 7.0112 0.0280 58.0263 18.0974
7.0925 0.0312 31.0334 21.0036
9.0525 0.0375 37.0285 25.0031
80 XHY 10.0973 0.0432 42.0561 28.0573
12.0700 0.0500 48.0719 32.0708
8" 4.0775 0.0188 219 8.0625 25.0233 16.0940
5.0156 0.0203 27.0198 18.0259
5.0563 0.0219 29.0286 19.0661
20 6.0350 0.0250 33.0308 22.0361
30 7.0036 0.0277 36.0786 24.0696
40 8.0179 0.0322 42.0352 28.0554
9.0525 0.0375 49.0216 33.0041
60 10.0312 0.0406 53.0085 35.0638
80 XHY 12.0700 0.0500 64.0627 43.0388
10" 4.0775 0.0188 273 10.0750 31.0588 21.0207
5.0563 0.0219 36.0689 24.0631
20 6.0350 0.0250 41.0759 28.0035
30 7.0798 0.0307 51.0002 34.0240
8.0738 0.0344 56.0946 38.0231
40 STD 9.0271 0.0365 63.0301 40.0483
11.0125 0.0438 71.0852 48.0238
60 XHY 12.0700 0.0500 81.0530 54.0735
80 15.0088 0.0594 95.0969 64.0429
12" 4.0775 0.0188 324 12.0750 37.0570 25.0222
5.0563 0.0219 43.0657 29.0309
6.0350 0.0250 49.0713 33.0375
7.0137 0.0281 55.0739 37.0420
7.0925 0.0312 61.0735 41.0445
9.0525 0.0375 73.0824 49.0562
10.0312 0.0406 79.0727 53.0525
12.0700 0.0500 97.0438 65.0415
14.0275 0.0562 108.0966 73.0154
14" 4.0775 0.0188 356 14.0000 41.0308 27.0732
5.0563 0.0219 48.0012 32.0233
20 6.0350 0.0250 54.0685 36.0713
7.0137 0.0281 61.0327 41.0172
7.0925 0.0312 67.0939 45.0611
STD 9.0525 0.0375 81.0281 54.0568
40 11.0125 0.0438 94.0498 63.0441
XHY 12.0700 0.0500 107.0381 72.0090
15.0875 0.0625 132.0983 89.0278
16” 4.0775 0.0188 406 16.0000 47.0290 21.0748
5.0563 0.0219 54.0980 36.0910
10 6.0350 0.0250 62.0639 42.0053
7.0137 0.0281 70.0268 47.0174
20 7.0925 0.0312 77.0866 52.0275
8.0738 0.0344 85.0677 57.0519

30

STD

 9.0525 0.0375 93.0213 62.0578
11.0125 0.0438 108.0433 72.0797

40

XHY

 12.0700 0.0500 123.0289 82.0770
18" 5.0563 0.0219 457 18.0000 61.0948 41.0588
6.0350 0.0250 70.0593 47.0393
7.0137 0.0281 79.0208 53.0176
20 7.0925 0.0312 87.0792 58.0939
STD 9.0525 0.0375 105.0144 70.0588
30 11.0125 0.0438 122.0369 82.0152
XHY 12.0700 0.0500 139.0198 93.0450
40 14.0275 0.0562 155.0904 104.0666
15.0875 0.0625 172.0754 115.0978
20" 6.0350 0.0250 508 20.0000 78.0547 52.0733
7.0163 0.0282 88.0458 59.0386
7.0925 0.0312 97.0719 65.0604
20 STD 9.0525 0.0375 117.0075 78.0598
11.0125 0.0438 136.0305 91.0508
30 XHY 12.0700 0.0500 155.0106 104.0130
40 15.0088 0.0594 183.0378 123.0110
15.0875 0.0625 192.0640 129.0328
17.0475 0.0688 211.0368 141.0901
24" 6.0350 0.0250 610 24.0000 94.0456 63.0413
7.0137 0.0281 106.0029 71.0183
7.0925 0.0312 117.0573 18.0932
20 STD 9.0525 0.0375 140.0938 64.0618
11.0125 0.0438 164.0176 110.0219
XHY 12.0700 0.0500 186.0923 125.0490
15.0875 0.0625 232.0410 156.0028
40 17.0475 0.0688 255.0148 171.0293
19.0050 0.0750 277.0401 186.0233
30" 6.0350 0.0250 762 30.0000 118.0318 79.0433
7.0137 0.0281 132.0851 89.0189
10 7.0925 0.0312 147.0353 98.0925
STD 9.0525 0.0375 176.0731 118.0648
11.0125 0.0438 205.0983 138.0286
20 XHY 12.0700 0.0500 234.0647 157.0530
30 15.0875 0.0625 292.0066 196.0078
17.0475 0.0688 320.0817 215.0380
19.0050 0.0750 348.0988 234.0293
36" 6.0350 0.0250 914 36.0000 142.0180 95.0453
7.0137 0.0281 159.0672 107.0196
10 7.0925 0.0312 177.0133 118.0918
STD 9.0525 0.0375 215.0525 142.0678
11.0125 0.0438 247.0790 166.0353
20 XHY 12.0700 0.0500 282.0372 198.0570
15.0875 0.0625 351.0723 236.0128
17.0475

0.0688

 386.0487 259.0467
19.0050

0.0750

 420.0576 282.0353
42" 7.0925 0.0312 1067 42.0000 206.0914 138.0911
STD 9.0525 0.0375 248.0319 166.0708
XHY 12.0700 0.0500 33.0097 221.0610
19.0050 0.0750 492.0163 330.0413
48" STD 9.0525 0.0375 1219 48.0000 284.0112 190.0738
11.0125 0.0438 331.0404 222.0487
XHY 12.0700 0.0500 377.0822 253.0650
19.0050 0.0750 563.0750 378.0473
22.0225 0.0875 655.0969 440.0383

 

Pressure Rating of ASME SB725 Inconel Alloy Pipe

Pressure Rating (psig)
Inconel Seamless Pipe Size
(inches)		 Inconel Seamless Pipe Schedule Temperature (oF)
400 650 100 300 600 200 500 700 750
1 1/2" 160 3291 2829 4619 3580 2916 3984 3060 2772 2743
80 2267 1949 3182 2466 2009 2744 2108 1909 1889
40 1608 1383 2257 1750 1425 1947 1496 1354 1340
1" 160 4375 3761 6140 4759 3876 5296 4068 3684 3646
80 3002 2580 4213 3265 2659 3634 2791 2528 2501
40 2171 1867 3048 2362 1924 2629 2019 1824 1810
10" 160 2242 1927 3147 2439 1986 2714 2085 1880 1868
80 1147 986 1609 1247 1016 1388 1066 966 956
40 694 596 974 755 615 840 645 584 578
3" 160 2736 2352 3840 2976 2424 3312 2544 2304 2280
80 1819 1564 2553 1979 1612 2202 1691 1532 1516
40 1287 1106 1806 1400 1140 1558 1196 1084 1072
4" 160 2566 2206 3601 2791 2273 3106 2386 2161 2138
80 1577 1355 2213 1715 1397 1909 1466 1328 1314
40 1091 938 1531 1187 967 1321 1014 919 909
2" 160 3205 2755 4499 3486 2840 3880 2980 2699 2671
80 1957 1682 2747 2129 1734 2369 1820 1648 1631
40 1355 1165 1902 1474 1201 1640 1260 1141 1129
6" 160 2343 2014 3289 2549 2076 2836 2179 1973 1953
80 1363 1172 1913 1483 1208 1650 1267 1148 1136
40 869 747 1219 945 770 1052 808 732 724
5" 160 2433 2091 3414 2646 2155 2945 2262 2049 2027
80 1411 1213 1981 1535 1250 1709 1312 1189 1176
40 956 822 1342 1040 847 1158 889 805 797
8" 160 2262 1944 3175 2460 2004 2738 2103 1905 1885
80 1205 1036 1692 1311 1068 1459 1121 1015 1005
40 765 657 1073 832 678 926 711 644 637

 

Standard of ASME SB167 Inconel Welded Pipe

Specifications:

ASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163, ASTM B516, ASTM B751, AMS 5580

International Specifications:

BS 3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4816 TÜV 305 AFNOR-NC 15 Fe

 

Dimensions of High Pressure Inconel Pipe

inconel Pipe OD
mm
Pipe WT
mm
in.
Sch
Kg/m
13.72
1.65
1/4
10S
0.50
13.72
2.24
1/4
40S
0.64
13.72
3.02
1/4
80S
0.81
17.15
1.65
3/8
10S
0.64
17.15
2.31
3/8
40S
0.86
17.15
3.20
3/8
80S
1.12
21.34
2.11
1/2
10S
1.02
21.34
2.77
1/2
40S
1.29
21.34
3.73
1/2
80S
1.65
26.67
2.11
3/4
10S
1.30
26.67
2.87
3/4
40S
1.71
26.67
3.91
3/4
80S
2.23
33.40
2.77
1
10S
2.13
33.40
3.38
1
40S
2.54
33.40
4.55
1
80S
3.29
33.40
6.352)
1
160
4.30
42.16
2.77
1¼
10S
2.73
42.16
3.56
1¼
40S
3.44
42.16
4.85
1¼
80S
4.53
42.16
6.352)
1¼
160
5.69
48.26
2.77
1½
10S
3.16
48.26
3.68
1½
40S
4.11
48.26
5.08
1½
80S
5.49
60.33
2.77
2
10S
3.99
60.33
3.91
2
40S
5.52
60.33
5.54
2
80S
7.60
60.33
8.742)
2
160
11.29
73.03
3.05
2½
10S
5.35
73.03
5.16
2½
40S
8.77
73.03
7.01
2½
80S
11.59
88.90
3.05
3
10S
6.56
88.90
5.49
3
40S
11.47
88.90
7.62
3
80S
15.51
88.90
11.132)
3
160
21.67
101.60
3.05
3½
10S
7.53
101.60
5.74
3½
40S
13.78
101.60
8.08
3½
80S
18.92
114.30
3.05
4
10S
8.50
114.30
6.02
4
40S
16.32
114.30
8.56
4
80S
22.67
114.30
13.492)
4
160
34.05
141.30
6.55
5
40S
22.10
141.30
9.53
5
80S
31.44
141.30
15.882)
5
160
49.87
168.28
3.4
6
10S
14.04
168.28
7.11
6
40S
28.69
168.28
10.97
6
80S
43.21
168.28
14.27
6
120
54.75
168.28
18.262)
6
160
68.59
219.08
8.18
8
40S
43.20
219.08
12.7
8
80S
65.63
219.08
18.23
8
120
91.30
219.08
23.012)
8
160
112.97

 

ASTM B167 Inconel Pipe Wall Thickness

Types Wall thickness Out diameter Length
Inconel Seamless (As per need) As per need 5.0 mm ~ 203.2mm Upto 6 Meters
NB Sizes (ready stock) SCH 10 / SCH 5 / SCH 80 / SCH 40 /SCH 160 1/8” ~ 8”
Inconel Welded (ready stock + As per need) 1.0 ~ 15.0 mm 5.0mm ~ 1219.2mm

 

Roughness of Inconel Pipe

Pipe Material Roughness Coefficients
Pipe Material

Specific Roughness
Factor, • , mm (ft)
Hazen-Williams
Coefficient, C
Manning Factor, n
Steel, welded and seamless
0.061 (0.0002)
140
-
Steel, Sheet metal, new
5 x 10-2 (1.6 x 10-4)
Commercial, new
4.6 x 10-2 (1.5 x 10-4)
Steel, Riveted
3.0 (1 x 10-2)
Steel, Rusted
2.0 (7 x 10-3)
Stainless
2 x 10-3 (7 x 10-6)
Ductile Iron
0.061 (0.0002)
130
-
Iron, Cast new
2.6 x 10-1 (8.5 x 10-4)
Iron, Wrough, new
4.6 x 10-2 (1.5 x 10-4)
Iron, Galvanized, new
1.5 x 10-1 (5 x 10-4)
Iron, Asphalted, cast
1.2 x 10-1 (4 x 10-4)
Ductile Iron, asphalt coated
0.12 (0.0004)
130
0.013
Copper and Brass
0.61 (0.002)
140
0.010
Brass, new
2 x 10-3 (7 x 10-6)
Glass
0.0015 (0.000005)
140
-
Thermoplastics
0.0015 (0.000005)
140
-
Drawn Tubing
0.0015 (0.000005)
-
-
Concrete, smoothed
4 x 10-2 (1.3 x 10-4)
Concrete, Rough
2.0 (7 x 10-3)
Rubber, Smoothed
1 x 10-2 (3.3 x 10-5)
Wood, Stave
5 x 10-1 (1.6 x 10-3)
Sources:
Hydraulic Institute, Engineering Data Book.
Various vendor data compiled by SAIC, 1998
F.M. White, Fluid Mechanics, 7th edition

 

Material Code of Inconel Alloy Pipe

Trade Name
ASTM/ ASME / UNS
(601)
ASTM B167 UNS N06601
(600)

ASTM B167 UNS N06600
(N06690)
ASTM B167 UNS N06690
(N06603)
ASTM B167 UNS N06603
(N06025)
ASTM B167 UNS N06025
(N06693)
ASTM B167 UNS N06693
(N06696)
ASTM B167 UNS N06696
(N06045)
ASTM B167 UNS N06045
(601)
ASTM B163 UNS N06601
(600)
ASTM B163 UNS N06600
(690)
ASTM B163 UNS N06690

 

B167 Incoloy Seamless Pipe Chemical Structure

Inconel Element (% By Mass)
Mo Cr Ni Fe Mn Nb Co Ti Cu Al S B Si C P
600 14.0–17.0 72.0 6.0–10.0 1.0 0.5 0.015 0.5 0.15
617 8.0–10.0 20.0–24.0 44.2–56.0 3.0 0.5 10.0–15.0 0.6 0.5 0.8–1.5 0.015 0.006 0.5 0.15 0.015
625 8.0–10.0 20.0–23.0 58.0 5.0 0.5 3.15–4.15 1.0 0.4 0.4 0.015 0.5 0.1 0.015
690 30 59.5 9.2 0.35 0.01 0.02 0.003 0.35 0.019
718 2.8–3.3 17.0–21.0 50.0–55.0 Balance 0.35 4.75–5.5 1.0 0.3 0.2–0.8 0.65–1.15 0.015 0.006 0.35 0.08 0.015
X-750 14.0–17.0 70.0 5.0–9.0 1.0 0.7–1.2 1.0 2.25–2.75 0.5 0.4–1.0 0.0   0.5 0.08

 

ASME SB725 Inconel Alloy Welded Pipe Mechanical Strength

Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Brinell (HB) max Rockwell B (HR B) max
Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5 – –

 

Equivalent Grades of Schedule 40 Inconel Pipe

Grade GOST Old British Japanese JIS UNS No Euronorm
BS En No AFNOR
601 XH60BT NA 49 NiCr23Fe NCF 601 N06601 2.4851 NC23FeA
625 ХН75МБТЮ NA 21 NiCr22Mo9Nb NCF 625 N06625 2.4856 NC22DNB4M
600 МНЖМц 28-2,5-1,5 NA 13 NiCr15Fe NCF 600 N06600 2.4816 NC15FE11M
Incoloy 825 ЭП703 NA 16 NiCr21Mo NCF 825 N08825 2.4858 NFE30C20DUM

 

Inconel Hollow Pipe Testing

  • IGC and PMI test
  • Pitting resistance test
  • Radiography test
  • Hydrostatic test
  • Flattening/flaring test
  • Chemical/Mechanical test

 

Packaging of Inconel Hexagonal Pipe

  • waterproof paper and plastic coverage
  • Wooden pallets or cases
  • Or as per customer need

Features of Siddhagiri Packaging :

  • - Packaging list (laminated) placed with box/crate.
  • - End of Inconel Seamless Pipe protected by plastic caps.
  • - Each package is plastic coated to protect against extreme weather conditions.
  • - Plastic strips are used to secure bundles.