Monel Pipe and Seamless Tube supplier as per ASTM B165/ B725

oldest B165 Monel Alloy Seamless Pipe Manufacturer in india, find updated Monel Pipe Price

alloys Pipes Are Useful Than Non-alloyed Pipes Due To Its Durability And Toughness. monel Alloy 400 an Alloy Of Nickel-copper, 67% Being Nickel, Is Known For Its Resistance To Seawater Corrosion Was Created By David H. Brown In 1906, Chief Metallurgist For International Nickel Co. It Was Named After Ambrose Monel. Alloy 400 Is A Little Bit Magnetic At Room Temperature And Can Resist Both Hydrochloric Acid And Hydrofluoric Acid. Using Silicon, The Properties Of The Casting Grades Of Monel Are Improved. The Monel Allow Are Available In Shapes Such As Pipe, Plate, Tube, Sheet, Wire, Etc.

The b165 Alloy 400 Pipe Is Known For Its Resistance To Seawater Corrosion, Acids, Etc. Hence The Probability Of The Pipes To Decay Decreases Drastically. The astm B725 Monel 400 Welded Pipes Are Extensively Used In Marine-based Applications For Their Corrosion Resistance Property In Various Corrosive Media. The Use Of These Pipes Are Increasing Day By Day Because Of Its Resistivity. monel Hexagonal Pipe Can Be Easily Fabricated By Cold Working, Hot Working, Welding And Even By Machining Thus It Has Superior Mechanical Properties. In India, monel Alloy Pipe Can Cost Anywhere Around 11,500 Inr, it Will Cost 125.18 Uk Pound Sterling In Uk, Whereas In Uae It Is 597.30 Uae Dirham. Monel 400 High-pressure Tube Has Great Resistance To Both Neutral And Alkaline Salt.

The monel Erv Pipe is Welded With Appropriate Metals And Has To Be Cleaned Thoroughly After Welding The Alloy And Is Widely Used By Marine, Chemical And Oil Industries. One Of The Reasons monel Hallow Pipe Is Widely Used In Chemical Processing Equipment, Marine Components, And Many Such Industrial Applications Is Due To Its Easily Welding Ability.

Monel Seamless Pipe

Monel Alloy Pipe

Monel Pipe

Don't forget to check ASTM B725 Monel Welded and ERW Pipe Dimensions and Weight Chart

Table of Content

Monel Pipe Specification chart
Monel Pipe Suppliers
Chemical Composition of Monel Seamless Pipe
ASTM B725 Monel Pipe Mechanical Properties
Melting Point of Monel Welded Pipe
Monel ERW Pipe price per kg in India
Size range of Monel Alloy Pipe

Monel Pipe Specification chart

ASTM / ASME Standards	ASTM B165 / ASME SB165
EFW Pipe size	5.0 mm - 1219.2 mm
Pipe Schedule	SCH5, SCH10, SCH40, STD, SCH80, SCH160
Pipe Finish	Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Pipe Form	Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc.
Pipe Length	Single Random, Double Random & Cut Length.
End	Plain End, Beveled End, Treaded.
Marking	All Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Material Test Certificates (MTC)	Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
Welded Tube Size	6.35 mm OD To 152 mm OD
Swg & Bwg	10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
tubing wall thickness	0.020" –0.220", (special wall thicknesses available)
tube Length	Single Random, Double Random, Standard & Cut length
Tube Finish	Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
tube Form	Round, Coil, Square, Rectangular, Boiler, Hydraulic, Straight or ‘U’ bent Tubes, Hollow, LSAW Tubes Etc.
Tube Type	Seamless, ERW, EFW, Welded, Fabricated
End	Plain End, Beveled End, Treaded
Marking	All tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Application	Oil Tube, Gas Tube, Fluid Tube, Boiler and Heatexchanger

Monel Pipe Suppliers

Monel ASTM B725 Monel ERW Pipe

Monel ASTM B725 Monel ERW Pipe

Monel Alloy Welded Pipe

Monel Alloy Welded Pipe

ASTM B165 Monel Seamless Pipe

ASTM B165 Monel Seamless Pipe

ASME SB725 Monel Alloy Square Pipe

ASME SB725 Monel Alloy Square Pipe

ASME SB165 Monel Round Pipe

ASME SB165 Monel Round Pipe

Monel Hollow Pipe

Monel Hollow Pipe

Cold Drawn Monel Seamless Pipe

Cold Drawn Monel Seamless Pipe

Monel Alloy Custom Pipe

Monel Alloy Custom Pipe

Chemical Composition of Monel Seamless Pipe

CHEMICAL COMPOSITION
Designation	C%	Co%	Cr%	Mo%	Ni%	V%	W%	Ai%	Cu%	Nb/Cb Ta%	Ti%	Fe%	Sonstige Autres-Other %
Alloy 400	0.12	-	-	-	65.0	-	-	-	32.0	-	-	1.5	Mn 1.0
Alloy 401	0.10	-	-	-	43.0	-	-	-	53.0	-	-	0.75	Si 0.25; Mn 2.25
Alloy 404	0.15	-			52.0-57.0	-	-	0.05	rest/bal	-	-	0.50	Mn 0.10; Si 0.10;S o.024
Alloy 502	0.10	-	-	-	63.0-17.0	-	-	2.5-3.5	rest/bal	-	0.50	2.0	Mn 1.5;Si 0.5; S 0.010
Alloy K 500	0.13	-	-	-	64.0	-	-	2.8	30.0	-	0.6	1.0	Mn 0.8
Alloy R 405	0.15	-	-	-	66.0	-	-	-	31.0	-	-	1.2	Mn 1.0; S 0.04

we are ASME SB 165 Monel Hallow and drill Pipe Suppliers in Mumbai, Call for Material test certificate and sample

ASTM B725 Monel Pipe Mechanical Properties


Tensile strength, Ultimate	550 Mpa
Tensile strength, Yield	240 Mpa
Elongation at Break	48%
ELECTRICAL PROPERTIES
Electrical Resistance	5.47e-005 ohm-cm
Curie Temperature (the temperature above which a ferromagnetic substance loses its ferromagnetism)	35°C
THERMAL PROPERTIES
CTE, linear 20°C	13.9 µm/m-°C
Heat Capacity	0.427 J/g-°C
Thermal Conductivity	21.8 W/m-K
Melting Point	1300 - 1350 °C
Solidus	1300 °C
Liquidus	1350 °C

Melting Point of Monel Welded Pipe

METAL	MELTING POINT
METAL	(OC)
Monel	1300 - 1350 °C

Buy Monel Square Pipe according to Standard at lowest possible price online

Do you know who are the best buyers of Monel Pipe

Iran, Chile, Philippines, Canada	Monel 400 Seamless Pipe (fm71)
Norway, United Arab Emirates (UAE), Europe, Romania	N04400 Monel 400 Ni Cu Alloy Pipe
Russia, Netherlands, Sweden, Malaysia	Monel 400 Pipe with Good Corrosion Protection
Mexico, Egypt,Malaysia, Los Alamos -Mexico	Dia 50mm Cu-Ni Alloy Rod Monel 400 Pipe with SGS
Malaysia, United Kingdom -UK, Singapore, NY 12203 (USA)	Corrosion Resistant Alloy Monel 400 Special Material Stainless Seamless Steel Pipe
Poland, UK, Dammam -KSA, Philippines	Monel 400 Seamless Steel Nickle Copper Pipe for Paper Making
Malaysia, Singapore, Qatar, Europe	Od 20mm Cu-Ni Alloy Tube Monel 400 Pipe for Exchanger
Japan, Malaysia, Czechia, Thailand	Big Diameter Monel 400 Nickel Pipe
Bangladesh, Malaysia, China, Colombia	Monel 400 for Cooling Tower
South Africa, Taiwan, Philippines, Kuwait	High Temperature Processing Hardening Monel 502 Nickel Based Pipe for Pump Shafting
South Korea, Malaysia, Bahrain, Singapore	Monel 400 Welded Pipe ASTM B163, ASTM B165
Philippines, UK, Belgium, Indonesia	Od 16mm Cu-Ni Alloy Tube Monel K500 Pipe for Evaporator
France, Thailand, Oman, Hong Kong	0.8mm Thick Nickel Alloy Monel 400 No4400 2.4360 Pipe
Turkey, Malaysia, Germany, Malaysia	Durable Monel 400 405 K500 Nickel Alloy Pipe
USA, Malaysia, Finland, Dubai	widely Use of Eyeglasses Polished Monel 400 Nickel Based Alloy Pipe for Frames
Saudi Arabia (KSA), Brazil, UK, Spain	Monel K500 N05500 2.4375 Stainless Steel Pipe
South Africa, Singapore, UAE, Europe	ASTM B127 Monel400 Nickel Pipe

Monel ERW Pipe price per kg in India

Monel Metal Price in India	Origin	Price in INR, (per kg)	Price in USD, (per kg)	Price in Euro, (per kg)
Monel 400 price per kg in UK / Europe	European	Rs 3100/-	$45	€39
Monel 400 price per kg in USA	USA	Rs 3400/-	$50	€43
Monel 400 price per kg in India	Indian	Rs 1800/-	$28	€22
Monel 400 price per kg in Japan	Japanese	Rs 2800/-	$40	€35

Get Monel Rectangular Pipe Chemical Composition and yeild chart online, refer Material Equivalent

Wall Thickness of Monel Hexagonal Pipe

Types	Out diameter	Wall thickness	Length
NB Sizes (in stock)	1/8” ~ 8”	SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160	Upto 6 Meters
monel 400 Seamless Pipe (Custom Sizes)	5.0mm ~ 203.2mm	As per requirement	Upto 6 Meters
monel 400 Welded Pipe (in Stock + Custom Sizes)	5.0mm ~ 1219.2mm	1.0 ~ 15.0 mm	Upto 6 Meters

Size range of Monel Alloy Pipe

OD mm	Pipe WT mm	in.	Sch	Kg/m
13.72	1.65	1/4	10S	0.50
13.72	2.24	1/4	40S	0.64
13.72	3.02	1/4	80S	0.81
17.15	1.65	3/8	10S	0.64
17.15	2.31	3/8	40S	0.86
17.15	3.20	3/8	80S	1.12
21.34	2.11	1/2	10S	1.02
21.34	2.77	1/2	40S	1.29
21.34	3.73	1/2	80S	1.65
26.67	2.11	3/4	10S	1.30
26.67	2.87	3/4	40S	1.71
26.67	3.91	3/4	80S	2.23
33.40	2.77	1	10S	2.13
33.40	3.38	1	40S	2.54
33.40	4.55	1	80S	3.29
33.40	6.352)	1	160	4.30
42.16	2.77	1¼	10S	2.73
42.16	3.56	1¼	40S	3.44
42.16	4.85	1¼	80S	4.53
42.16	6.352)	1¼	160	5.69
48.26	2.77	1½	10S	3.16
48.26	3.68	1½	40S	4.11
48.26	5.08	1½	80S	5.49
60.33	2.77	2	10S	3.99
60.33	3.91	2	40S	5.52
60.33	5.54	2	80S	7.60
60.33	8.742)	2	160	11.29
73.03	3.05	2½	10S	5.35
73.03	5.16	2½	40S	8.77
73.03	7.01	2½	80S	11.59
88.90	3.05	3	10S	6.56
88.90	5.49	3	40S	11.47
88.90	7.62	3	80S	15.51
88.90	11.132)	3	160	21.67
101.60	3.05	3½	10S	7.53
101.60	5.74	3½	40S	13.78
101.60	8.08	3½	80S	18.92
114.30	3.05	4	10S	8.50
114.30	6.02	4	40S	16.32
114.30	8.56	4	80S	22.67
114.30	13.492)	4	160	34.05
141.30	6.55	5	40S	22.10
141.30	9.53	5	80S	31.44
141.30	15.882)	5	160	49.87
168.28	3.4	6	10S	14.04
168.28	7.11	6	40S	28.69
168.28	10.97	6	80S	43.21
168.28	14.27	6	120	54.75
168.28	18.262)	6	160	68.59
219.08	8.18	8	40S	43.20
219.08	12.7	8	80S	65.63
219.08	18.23	8	120	91.30
219.08	23.012)	8	160	112.97

ASME SB 165 Seamless Monel Pipe Stock List

Monel® 400 Seamless or Welded Pipe	Thickness	Nominal Diameter (Standard)	Nominal Diameter (Metric)
1 Inch Sch. 10	Sch. 10	1 inches	25 mm
1 Inch Sch. 160	Sch. 160	1 inches	25 mm
1 Inch Sch. 40	Sch. 40	1 inches	25 mm
1 Inch Sch. 5	Sch. 5	1 inches	25 mm
1 Inch Sch. 80	Sch. 80	1 inches	25 mm
1 Inch Sch. XXH	Sch. XXH	1 inches	25 mm
1 1/2 Inch Sch. 10	Sch. 10	1 1/2 inches	40 mm
1 1/2 Inch Sch. 160	Sch. 160	1 1/2 inches	40 mm
1 1/2 Inch Sch. 40	Sch. 40	1 1/2 inches	40 mm
1 1/2 Inch Sch. 80	Sch. 80	1 1/2 inches	40 mm
1 1/2 Inch Sch. XXH	Sch. XXH	1 1/2 inches	40 mm
1 1/4 Inch Sch. 10	Sch. 10	1 1/4 inches	32 mm
1 1/4 Inch Sch. 160	Sch. 160	1 1/4 inches	23 mm
1 1/4 Inch Sch. 40	Sch. 40	1 1/4 inches	32 mm
1 1/4 Inch Sch. 80	Sch. 80	1 1/4 inches	32 mm
1 1/4 Inch Sch. XXH	Sch. XXH	1 1/4 inches	23 mm
1/2 Inch Sch. 10	Sch. 10	1/2 inches	15 mm
1/2 Inch Sch. 160	Sch. 160	1/2 inches	15 mm
1/2 Inch Sch. 40	Sch. 40	1/2 inches	15 mm
1/2 Inch Sch. 80	Sch. 80	1/2 inches	15 mm
1/2 Inch Sch. XXH	Sch. XXH	1/2 inches	15 mm
1/4 Inch Sch. 10	Sch. 10	1/4 inches	8 mm
1/4 Inch Sch. 40	Sch. 40	1/4 inches	8 mm
1/4 Inch Sch. 80	Sch. 80	1/4 inches	8 mm
1/8 Inch Sch. 40	Sch. 40	1/8 inches	6 mm

ASTM B725 Monel Pipe Pressure Rating

Pipe O.D. (in.)	Wall Thickness of Pipe (inches)
	.028	.035	.049	.065	.083	.095	.109	.120
	Working Pressure (psig)
1/8	7900	10100
1/4	3700	4800	7000	9500
5/16		3700	5400	7300
3/8		3100	4400	6100
1/2		2300	3200	4400
3/4			2200	3000	4000	4600
1				2200	2900	3400	3900	4300

B165 Monel Alloy Seamless Pipe Testing

Flattening Test
Pitting Resistance Test
Flaring Test
Intergranular Corrosion (IGC) Test
Micro and MacroTest
Mechanical Testing Such as Tensile of Area
Chemical Analysis – Spectro Analysis
Positive Material Identification – PMI Testing
Hardness Test

ASTM B725 Monel Welded Pipe Dimensions Chart

Monel Pipe OD mm	Pipe WT mm	in.	Sch	Kg/m
13.72	1.65	1/4	10S	0.50
13.72	2.24	1/4	40S	0.64
13.72	3.02	1/4	80S	0.81
17.15	1.65	3/8	10S	0.64
17.15	2.31	3/8	40S	0.86
17.15	3.20	3/8	80S	1.12
21.34	2.11	1/2	10S	1.02
21.34	2.77	1/2	40S	1.29
21.34	3.73	1/2	80S	1.65
26.67	2.11	3/4	10S	1.30
26.67	2.87	3/4	40S	1.71
26.67	3.91	3/4	80S	2.23
33.40	2.77	1	10S	2.13
33.40	3.38	1	40S	2.54
33.40	4.55	1	80S	3.29
33.40	6.352)	1	160	4.30
42.16	2.77	1¼	10S	2.73
42.16	3.56	1¼	40S	3.44
42.16	4.85	1¼	80S	4.53
42.16	6.352)	1¼	160	5.69
48.26	2.77	1½	10S	3.16
48.26	3.68	1½	40S	4.11
48.26	5.08	1½	80S	5.49
60.33	2.77	2	10S	3.99
60.33	3.91	2	40S	5.52
60.33	5.54	2	80S	7.60
60.33	8.742)	2	160	11.29
73.03	3.05	2½	10S	5.35
73.03	5.16	2½	40S	8.77
73.03	7.01	2½	80S	11.59
88.90	3.05	3	10S	6.56
88.90	5.49	3	40S	11.47
88.90	7.62	3	80S	15.51
88.90	11.132)	3	160	21.67
101.60	3.05	3½	10S	7.53
101.60	5.74	3½	40S	13.78
101.60	8.08	3½	80S	18.92
114.30	3.05	4	10S	8.50
114.30	6.02	4	40S	16.32
114.30	8.56	4	80S	22.67
114.30	13.492)	4	160	34.05
141.30	6.55	5	40S	22.10
141.30	9.53	5	80S	31.44
141.30	15.882)	5	160	49.87
168.28	3.4	6	10S	14.04
168.28	7.11	6	40S	28.69
168.28	10.97	6	80S	43.21
168.28	14.27	6	120	54.75
168.28	18.262)	6	160	68.59
219.08	8.18	8	40S	43.20
219.08	12.7	8	80S	65.63
219.08	18.23	8	120	91.30
219.08	23.012)	8	160	112.97

ASME SB725 Monel Welded Pipe Standards

Specifications:	ASTM B165, ASTM B829, ASTM B775, ASTM B725, ASTM B163, ASTM B730, ASTM B751,ams 4574
International Specifications:	din 17752, VdTUV 2635

Schedule Chart of Monel Alloy Pip

1/8" IPS(.405"O. D.)	3 1/2" IPS( 4.000"O. D.)
SCH 40, 80	SCH 10, 40, 80, 160, XXH
1/4" IPS(.540"O. D.)	4" IPS(4.500"O. D.)
SCH 10, 40, 80	SCH 10, 40, 80, 160, XXH
3/8" IPS(.675"O. D.)	5" IPS( 5.563"O. D.)
SCH 10, 40, 80	SCH 10, 40, 80, 160, XXH
1/2" IPS(.840"O. D.)	6" IPS(6.625"O. D.)
SCH 5, 10, 40, 80, 160, XXH	SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050"O. D.)	8 ” IPS(8.625"O. D.)
SCH 10, 40, 80, 160, XXH	SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′O. D.)	10" IPS(10.750"O. D.)
SCH 5, 10, 40, 80, 160, XXH	SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660"O. D.)	12" IPS(12.750"O. D.)
SCH 10, 40, 80, 160, XXH	SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900"O. D.)	14" IPS(14.000"O. D.)
SCH 10, 40, 80, 160, XXH	SCH10 (.188), SCH40 (.375)
2" IPS(2.375"O. D.)	16" IPS(16.000"O. D.)
SCH 10, 40, 80, 160, XXH	SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875"O. D.)	18" IPS (18.000"O. D.)
SCH 10, 40, 80, 160, XXH	SCH-40 (.375)
3" IPS( 3.500"O. D.)
SCH 5, 10, 40, 80, 160, XXH

Monel Pipe Weight Chart

NPS	Outside Diameter		Wall Thickness			Weight	Weight
NPS	in	mm	in	mm	Sched	kg/Mtr	Lb/ft
1/2″	0.840	21	0.109	2.769	40 STD	1.268	0.851
			0.147	3.734	80 STD	1.621	1.088
3/4″	1.050	27	0.113	2.870	40 STD	1.684	1.131
			0.154	3.912	80 STD	2.195	1.474
1″	1.315	33	0.133	3.378	40 STD	2.501	1.679
			0.179	4.547	80 STD	3.325	2.172
1 1/4″	1.660	42	0.140	3.556	40 STD	3.385	2.273
			0.191	4.851	80 STD	4.464	2.997
1 1/2″	1.900	48	0.145	3.683	40 STD	4.048	2.718
			0.200	5.080	80 STD	5.409	3.361
2″	2.375	60	0.154	3.912	40 STD	5.441	3.653
			0.218	5.537	80 STD	7.480	5.022
2 1/2″	2.875	73	0.203	5.516	40 STD	8.629	5.793
			0.276	7.010	80 STD	11.411	7.661
3″	3.500	89	0.216	5.486	40 STD	11.284	7.576
			0.300	7.620	80 STD	15.272	10.253
4″	4.500	114	0.237	6.020		16.073	10.790
			0.337	8.560		22.318	14.983
6″	6.625	168	0.188	4.775		19.252	12.924
			0.203	5.516		20.739	13.923
			0.219	5.563		22.318	14.983
			0.250	6.350		25.354	17.021
			0.280	7.112	40 STD	58.263	18.974
			0.312	7.925		31.334	21.036
			0.375	9.525		37.285	25.031
			0.432	10.973	80 XHY	42.561	28.573
			0.500	12.700		48.719	32.708
8″	8.625	219	0.188	4.775		25.233	16.940
			0.203	5.156		27.198	18.259
			0.219	5.563		29.286	19.661
			0.250	6.350	20	33.308	22.361
			0.277	7.036	30	36.786	24.696
			0.322	8.179	40	42.352	28.554
			0.375	9.525		49.216	33.041
			0.406	10.312	60	53.085	35.638
			0.500	12.700	80 XHY	64.627	43.388
10″	10.750	273	0.188	4.775		31.588	21.207
			0.219	5.563		36.689	24.631
			0.250	6.350	20	41.759	28.035
			0.307	7.798	30	51.002	34.240
			0.344	8.738		56.946	38.231
			0.365	9.271	40 STD	63.301	40.483
			0.438	11.125		71.852	48.238
			0.500	12.700	60 XHY	81.530	54.735
			0.594	15.088	80	95.969	64.429
12″	12.750	324	0.188	4.775		37.570	25.222
			0.219	5.563		43.657	29.309
			0.250	6.350		49.713	33.375
			0.281	7.137		55.739	37.420
			0.312	7.925		61.735	41.445
			0.375	9.525		73.824	49.562
			0.406	10.312		79.727	53.525
			0.500	12.700		97.438	65.415
			0.562	14.275		108.966	73.154
14″	14.000	356	0.188	4.775		41.308	27.732
			0.219	5.563		48.012	32.233
			0.250	6.350	20	54.685	36.713
			0.281	7.137		61.327	41.172
			0.312	7.925		67.939	45.611
			0.375	9.525	STD	81.281	54.568
			0.438	11.125	40	94.498	63.441
			0.500	12.700	XHY	107.381	72.090
			0.625	15.875		132.983	89.278
16”	16.000	406	0.188	4.775		47.290	21.748
			0.219	5.563		54.980	36.910
			0.250	6.350	10	62.639	42.053
			0.281	7.137		70.268	47.174
			0.312	7.925	20	77.866	52.275
			0.344	8.738		85.677	57.519
			0.375	9.525	30 STD	93.213	62.578
			0.438	11.125		108.433	72.797
			0.500	12.700	40 XHY	123.289	82.770
18″	18.000	457	0.219	5.563		61.948	41.588
			0.250	6.350		70.593	47.393
			0.281	7.137		79.208	53.176
			0.312	7.925	20	87.792	58.939
			0.375	9.525	STD	105.144	70.588
			0.438	11.125	30	122.369	82.152
			0.500	12.700	XHY	139.198	93.450
			0.562	14.275	40	155.904	104.666
			0.625	15.875		172.754	115.978
20″	20.000	508	0.250	6.350		78.547	52.733
			0.282	7.163		88.458	59.386
			0.312	7.925		97.719	65.604
			0.375	9.525	20 STD	117.075	78.598
			0.438	11.125		136.305	91.508
			0.500	12.700	30 XHY	155.106	104.130
			0.594	15.088	40	183.378	123.110
			0.625	15.875		192.640	129.328
			0.688	17.475		211.368	141.901
24″	24.000	610	0.250	6.350		94.456	63.413
			0.281	7.137		106.029	71.183
			0.312	7.925		117.573	18.932
			0.375	9.525	20 STD	140.938	64.618
			0.438	11.125		164.176	110.219
			0.500	12.700	XHY	186.923	125.490
			0.625	15.875		232.410	156.028
			0.688	17.475	40	255.148	171.293
			0.750	19.050		277.401	186.233
30″	30.000	762	0.250	6.350		118.318	79.433
			0.281	7.137		132.851	89.189
			0.312	7.925	10	147.353	98.925
			0.375	9.525	STD	176.731	118.648
			0.438	11.125		205.983	138.286
			0.500	12.700	20 XHY	234.647	157.530
			0.625	15.875	30	292.066	196.078
			0.688	17.475		320.817	215.380
			0.750	19.050		348.988	234.293
36″	36.000	914	0.250	6.350		142.180	95.453
			0.281	7.137		159.672	107.196
			0.312	7.925	10	177.133	118.918
			0.375	9.525	STD	215.525	142.678
			0.438	11.125		247.790	166.353
			0.500	12.700	20 XHY	282.372	198.570
			0.625	15.875		351.723	236.128
			0.688	17.475		386.487	259.467
			0.750	19.050		420.576	282.353
42″	42.000	1067	0.312	7.925		206.914	138.911
			0.375	9.525	STD	248.319	166.708
			0.500	12.700	XHY	33.097	221.610
			0.750	19.050		492.163	330.413
48″	48.000	1219	0.375	9.525	STD	284.112	190.738
			0.438	11.125		331.404	222.487
			0.500	12.700	XHY	377.822	253.650
			0.750	19.050		563.750	378.473
			0.875	22.225		655.969	440.383