Monel Round Bar
ASTM B164 Hex Bar and Monel Rod supplier in India, check ready stock and weight chart
Monel Round Bar
Monel Alloy Hex Bar
ASTM B164 Monel Bar
Manufacturer of ASME SB164 Monel Hex Bar and Square Bar at discounted price, get Monel Round Bar Weight Calculator here
Monel Round Bar is an alloy which is based on 65-70% nickel and 20-29% copper and it also contains 5% of iron and manganese and other compounds. It refers to a group of nickel alloys that provide enhanced capabilities to withstand conditions that other materials cannot. It is very difficult to machine as it work-hardens very quickly. Itis typically much more expensive
Monel rod is of different commercial types of Monel such as Alloy 400, Alloy 401, Alloy R-405, Alloy 450, Alloy K-500, Monel 404 Monel is commonly used in applications with highly corrosive conditions. It is used for chemical and hydrocarbon processing equipment, marine engineering, pumps, valves, shafts, fittings, fasteners, and heat exchangers. It is also used as a frames and as a part of metal instruments of eyeglasses.However with much greater strength during aging due to the formation.Monel is generally much more expensive than stainless steel.
Monel Bar stock is available in 6 mm to 152.4 mm dia
Table of Content
- Material Specification of Monel Round Bar
- Available Types of Monel rod
- Check Price of ASME SB164 Monel Round Bar
- Chemical Structure of Monel Flat Bar
- Mechanical Analysis of Monel Alloy Hex Bar
- Material Equivalent of Monel Alloy Cold Drawn Bar
- Condition of ASME SB164 Monel Annealed Bar
- Surface finish of Monel Cold Drawn Bright Bar
- Size Range of ASTM B164 Monel Forged Bar
- Dimensions of ASME SB164 Monel Square Bar
| Specification | ASTM B164/ ASME SB164 |
|---|---|
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size (in mm) | 3*20*20~12*100*100 |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar (in mm) | 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
| Hollow Bar (in mm) | 32 OD x 16 ID to 250 OD x 200 ID) |
| Billet Size | 1/2" to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Manufacturing Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Processing | Bar cutting to 650mm |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
ASME SB164 Monel Round Bar
Monel Flat Bar
ASTM B164 Monel Square Bar
Monel Polished Bar
Monel Alloy Cold Drawn Bar
ASME SB164 Monel Annealed Bar
Monel Cold Drawn Bright Bar
ASTM B164 Monel Forged Bar
Before Buy Check Monel Flat Bar price in India, we can help with all Monel supply needs.
We Stock Monel Round Bar in India and supply in below countries
| ASTM B865 Nickel Alloy Monel K-400 /K-500 Polishing Round Bar | Indonesia, Belgium, Philippines, Dammam -KSA |
| Brushed Round Monel R405 Nickel Based Allooy Bar for Fasteners | France, Thailand, Europe, Qatar |
| Nickel Alloy Monel K500 (UNS N05500) Bright Round Bar | Germany, Malaysia, Thailand, Czechia |
| ASME Sb164 Hot Rolled Turned Monel K500 Round Nickel Bar | USA, Finland, Bangladesh, Malaysia |
| Monel K-500 Round Bars (UNS N0.5500), For Industrial, Size/Diameter: >4 inch | Saudi Arabia (KSA), Brazil, Kuwait, South Africa |
| Monel Rods, Size/Diameter: 3 Inch And 4 Inch | South Africa, Singapore, Singapore, Bahrain |
| AMS 4676 Monel K500 Round Bar | Australia, Nigeria, UK, Philippines |
| Monel R-405 Forged/Forging Round Bars (UNS N04405, Monel R405, Alloy R-405) | Malaysia, UAE, Hong Kong, Oman |
| Cold Drawn Nickel Alloy Monel 400 Round Bar | Italy, Singapore, Iran, Chile |
| Monel 400, Uns N04400, MCU-28-1.5-1.8, Ni68cu28fe Stainless Steel Bars | Turkey, Malaysia, Norway, United Arab Emirates (UAE) |
| Machining Monel Alloy Centerless Ground Round Bar | Malaysia, Dubai, Russia, Netherlands |
| Monel Rod, Length: 3 & 6 meter | Spain, UK, Mexico, Egypt |
| Monel K500 Round Bars, For Chemical Industries, Size: 120 mm | Europe, UAE, Malaysia, United Kingdom -UK |
| monel alloy K500 bright surface round bar | Canada, Ellington -United States, Poland, UK |
| Monel Alloy 400 Round Bar Price in India (in mm) | Quantity | Price List |
|---|---|---|
| Price of Alloy 400 Hex Bar / Rod 10 (A/F) x 1000 Length | 1 | $101.16 |
| Price of Alloy 400 Hex Bar / Rod 10 (A/F) x 1000 Length | 3 | $256.52 |
| Designation | C% | Co% | Cr% | Mo% | Ni% | V% | W% | Ai% | Cu% | Nb/Cb Ta% | Ti% | Fe% | Sonstige Autres-Other % |
| Monel 400 | 0.12 | - | - | - | 65.0 | - | - | - | 32.0 | - | - | 1.5 | Mn 1.0 |
| Monel 401 | 0.10 | - | - | - | 43.0 | - | - | - | 53.0 | - | - | 0.75 | Si 0.25; Mn 2.25 |
| Monel 404 | 0.15 | - | 52.0-57.0 | - | - | 0.05 | rest/bal | - | - | 0.50 | Mn 0.10; Si 0.10;S o.024 | ||
| Monel 502 | 0.10 | - | - | - | 63.0-17.0 | - | - | 2.5-3.5 | rest/bal | - | 0.50 | 2.0 | Mn 1.5;Si 0.5; S 0.010 |
| Monel K 500 | 0.13 | - | - | - | 64.0 | - | - | 2.8 | 30.0 | - | 0.6 | 1.0 | Mn 0.8 |
| Monel R 405 | 0.15 | - | - | - | 66.0 | - | - | - | 31.0 | - | - | 1.2 | Mn 1.0; S 0.04 |
Check standard specification & price list of ASTM B164 Monel Alloy Bright Bars, Forged Bar Ex Mumbai
| Tensile strength, Ultimate | 550 Mpa |
| Tensile strength, Yield | 240 Mpa |
| Elongation at Break | 48% |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Monel K500 |
2.4375 |
N05500 |
– |
– |
– |
– |
– |
| H&T | Hardened and tempered. |
| ANN | Annealed |
| PH | Precipitation hardened. |
we supply custom sizes Monel Rod & shaft for pumps, Don't spend for extra size of Monel Round Bar
| CD | Cold drawn | P | Polished |
| BD | Bright drawn | SRE | Slit rolled edge |
| CG | Centreless ground | HF | Hot finished |
| CF | Cold finished | HRAP | Hot rolled annealed and pickled |
| P&T | Peeled and turned | RT | Rough turned/peeled |
| ST | Smooth turned | PR | Peeled and reeled |
|
Tolerances of Monel Welding Rod
| Shape / Section | Size, diameter or width across flats | Permitted variation |
| mm | mm | |
| Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 | + 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
| Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 | + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
| Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 | + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
| Square and hexagon | ≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 | + 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
| Metric | US Bar | ASTM/ Canadian | Japanese | ||||
|---|---|---|---|---|---|---|---|
| Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
| 5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
| 5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
| 6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
| 7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
| 8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
| 9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
| 10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
| 11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
| 12 | 12 | #10 | 1.250 | 32 | 32 | ||
| 14 | 14 | #11 | 1.375 | 35 | 35 | ||
| 16 | 16 | #12 | 1.500 | 38 | 38 | ||
| 18 | 18 | #13 | 1.625 | 41 | 41 | ||
| 20 | 20 | #14 | 1.750 | 44 | 44 | ||
| 22 | 22 | #15 | 1.875 | 48 | 48 | ||
| 25 | 25 | #16 | 2.000 | 51 | 51 | ||
| 28 | 28 | #18 | 2.250 | 57 | 57 | ||
| 32 | 32 | ||||||
| 36 | 36 | ||||||
| 40 | 40 | ||||||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
Monel Flat Bar Standards And Grades
Specifications: |
ASTM B164, AMS 4675, AMS 4730, AMS 4731 |
International Specifications: |
QQ-N-281 , BS3076NA13, DIN 17753, VdTUV 263 |
Size chart of Monel Alloy Flat Bar
Monel Flat bar – metric sizes and weights |
|||
|---|---|---|---|
Flat Size |
KG’s per Metre |
Standard Length (metres) |
Colour Code |
10 x 3 | 0.24 | 6.0 | Blue |
13 x 3 | 0.31 | 6.0 | Blue |
13 x 5 | 0.46 | 6.0 | Orange |
16 x 3 | 0.38 | 6.0 | Blue |
16 x 5 | 0.64 | 6.0 | Orange |
16 x 8 | 1.03 | 6.0 | Red |
20 x 3 | 0.48 | 6.0 | Blue |
20 x 5 | 0.81 | 6.0 | Orange |
20 x 6 | 0.97 | 6.0 | White |
20 x 10 | 1.61 | 6.0 | Yellow |
25 x 3 | 0.60 | 6.0 | Blue |
25 x 5 | 1.01 | 6.0 | Orange |
25 x 6 | 1.21 | 6.0 | White |
25 x 8 | 1.61 | 6.0 | Red |
25 x 10 | 2.01 | 6.0 | Yellow |
25 x 12 | 2.41 | 6.0 | Pink |
32 x 3 | 0.77 | 6.0 | Blue |
32 x 5 | 1.29 | 6.0 | Orange |
32 x 6 | 1.55 | 6.0 | White |
32 x 8 | 2.06 | 6.0 | Red |
32 x 10 | 2.58 | 6.0 | Yellow |
32 x 12 | 3.09 | 6.0 | Pink |
40 x 3 | 0.97 | 6.0 | Blue |
40 x 5 | 1.61 | 6.0 | Orange |
40 x 6 | 1.93 | 6.0 | White |
40 x 8 | 2.58 | 6.0 | Red |
40 x 10 | 3.22 | 6.0 | Yellow |
40 x 12 | 3.86 | 6.0 | Pink |
40 x 16 | 5.15 | 6.0 | Grey |
40 x 20 | 6.14 | 6.0 | Green |
50 x 3 | 1.21 | 6.0 | Blue |
50 x 5 | 2.01 | 6.0 | Orange |
50 x 6 | 2.41 | 6.0 | White |
50 x 8 | 3.22 | 6.0 | Red |
50 x 10 | 4.02 | 6.0 | Yellow |
50 x 12 | 4.83 | 6.0 | Pink |
50 x 16 | 6.44 | 6.0 | Grey |
50 x 20 | 8.05 | 6.0 | Green |
50 x 25 | 10.1 | 6.0 | Purple |
65 x 3 | 1.57 | 6.0 | Blue |
65 x 5 | 2.62 | 6.0 | Orange |
65 x 6 | 3.14 | 6.0 | White |
65 x 8 | 4.18 | 6.0 | Red |
65 x 10 | 5.23 | 6.0 | Yellow |
65 x 12 | 6.28 | 6.0 | Pink |
65 x 16 | 8.37 | 6.0 | Grey |
65 x 20 | 10.5 | 6.0 | Green |
65 x 25 | 13.1 | 6.0 | Purple |
75 x 5 | 3.02 | 6.0 | Orange |
75 x 6 | 3.62 | 6.0 | White |
75 x 8 | 4.83 | 6.0 | Red |
75 x 10 | 6.04 | 6.0 | Yellow |
75 x 12 | 7.24 | 6.0 | Pink |
75 x 16 | 9.66 | 6.0 | Grey |
75 x 20 | 12.1 | 6.0 | Green |
75 x 25 | 15.1 | 6.0 | Purple |
75 x 40 | 24.1 | 6.0 | Yellow |
90 x 5 | 3.62 | 6.0 | Orange |
90 x 6 | 4.35 | 6.0 | White |
90 x 8 | 5.79 | 6.0 | Red |
90 x 10 | 7.24 | 6.0 | Yellow |
90 x 12 | 8.69 | 6.0 | Pink |
100 x 5 | 4.02 | 6.0 | Orange |
100 x 6 | 4.83 | 6.0 | White |
100 x 8 | 6.44 | 6.0 | Red |
100 x 10 | 8.05 | 6.0 | Yellow |
100 x 12 | 9.66 | 6.0 | Pink |
100 x 16 | 12.9 | 6.0 | Grey |
100 x 20 | 16.1 | 6.0 | Green |
100 x 25 | 20.1 | 6.0 | Purple |
100 x 50 | 40.2 | 6.0 | Green |
110 x 6 | 5.31 | 6.0 | White |
110 x 8 | 7.08 | 6.0 | Red |
110 x 10 | 8.85 | 6.0 | Yellow |
110 x 12 | 10.6 | 6.0 | Pink |
130 x 5 | 5.23 | 6.0 | Orange |
130 x 6 | 6.28 | 6.0 | White |
130 x 8 | 8.37 | 6.0 | Red |
130 x 10 | 10.5 | 6.0 | Yellow |
130 x 12 | 12.6 | 6.0 | Pink |
130 x 16 | 16.7 | 6.0 | Grey |
130 x 20 | 20.9 | 6.0 | Green |
130 x 25 | 26.2 | 6.0 | Purple |
150 x 5 | 6.04 | 6.0 | Orange |
150 x 6 | 7.24 | 6.0 | White |
150 x 8 | 9.66 | 6.0 | Red |
150 x 10 | 12.1 | 6.0 | Yellow |
150 x 12 | 14.5 | 6.0 | Pink |
150 x 16 | 19.3 | 6.0 | Grey |
150 x 20 | 24.1 | 6.0 | Green |
150 x 25 | 30.1 | 6.0 | Purple |
150 x 50 | 60.4 | 6.0 | Green |
180 x 5 | 7.24 | 6.0 | Orange |
180 x 6 | 8.69 | 6.0 | White |
180 x 10 | 14.5 | 6.0 | Yellow |
180 x 12 | 17.4 | 6.0 | Pink |
180 x 16 | 23.2 | 6.0 | Grey |
180 x 20 | 29.0 | 6.0 | Green |
180 x 25 | 36.2 | 6.0 | Purple |
200 x 6 | 9.66 | 6.0 | White |
200 x 8 | 12.9 | 6.0 | Red |
200 x 10 | 16.1 | 6.0 | Yellow |
200 x 12 | 19.3 | 6.0 | Pink |
200 x 16 | 25.7 | 6.0 | Grey |
200 x 20 | 32.2 | 6.0 | Green |
200 x 25 | 40.3 | 6.0 | Purple |
250 x 6 | 12.1 | 6.0 | White |
250 x 8 | 16.1 | 6.0 | Red |
250 x 10 | 20.1 | 6.0 | Yellow |
250 x 12 | 24.1 | 6.0 | Pink |
250 x 16 | 32.2 | 6.0 | Grey |
250 x 20 | 40.2 | 6.0 | Green |
250 x 25 | 50.3 | 6.0 | Purple |
300 x 6 | 14.5 | 6.0 | White |
300 x 8 | 19.3 | 6.0 | Red |
300 x 10 | 24.1 | 6.0 | Yellow |
300 x 12 | 29.0 | 6.0 | Pink |
300 x 16 | 38.6 | 6.0 | Grey |
300 x 20 | 48.3 | 6.0 | Green |
300 x 25 | 60.4 | 6.0 | Purple |
Monel Round Bar Stock List
| Diameter | Diameter | Weight | Density |
|---|---|---|---|
| 1/4 inches | 0.25 inches6.35 mm | 0.187 lbs/ft0.2782934 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 9/32 inches | 0.281 inches7.1374 mm | 0.237 lbs/ft0.3527034 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 5/16 inches | 0.312 inches7.9248 mm | 0.293 lbs/ft0.4360426 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 11/32 inches | 0.343 inches8.7122 mm | 0.354 lbs/ft0.5268228 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 3/8 inches | 0.375 inches9.525 mm | 0.421 lbs/ft0.6265322 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 13/32 inches | 0.406 inches10.3124 mm | 0.495 lbs/ft0.736659 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 7/16 inches | 0.437 inches11.0998 mm | 0.574 lbs/ft0.8542268 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 15/32 inches | 0.468 inches11.8872 mm | 0.649 lbs/ft0.9658418 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 1/2 inches | 0.5 inches12.7 mm | 0.749 lbs/ft1.1146618 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 17/32 inches | 0.531 inches13.4874 mm | 0.846 lbs/ft1.2590172 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 9/16 inches | 0.562 inches14.2748 mm | 0.948 lbs/ft1.4108136 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 19/32 inches | 0.593 inches15.0622 mm | 1.06 lbs/ft1.577492 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 5/8 inches | 0.625 inches15.875 mm | 1.17 lbs/ft1.741194 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 21/32 inches | 0.656 inches16.6624 mm | 1.29 lbs/ft1.919778 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 11/16 inches | 0.687 inches17.4498 mm | 1.42 lbs/ft2.113244 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 23/32 inches | 0.718 inches18.2372 mm | 1.55 lbs/ft2.30671 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 3/4 inches | 0.75 inches19.05 mm | 1.690 lbs/ft2.515058 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 25/32 inches | 0.781 inches19.8374 mm | 1.83 lbs/ft2.723406 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 13/16 inches | 0.812 inches20.6248 mm | 1.98 lbs/ft2.946636 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 27/32 inches | 0.843 inches21.4122 mm | 2.13 lbs/ft3.169866 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 7/8 inches | 0.875 inches22.225 mm | 2.29 lbs/ft3.407978 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 29/32 inches | 0.906 inches23.0124 mm | 2.46 lbs/ft3.660972 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 15/16 inches | 0.937 inches23.7998 mm | 2.63 lbs/ft3.913966 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 31/32 inches | 0.968 inches24.5872 mm | 2.81 lbs/ft4.181842 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
| 1 inches | 1 inches25.4 mm | 3.00 lbs/ft4.4646 kg/m | 0.319 lbs/in³8.82989 g/cm³ |
Size range of Monel Alloy Hex Bar
hex bar Size in Inches |
hex bar Wt per Ft |
hex bar Wt per 12′ |
|---|---|---|
3/16″ | 0.104 | 1.248 |
1/4″ | 0.180 | 2.160 |
5/16″ | 0.290 | 3.480 |
3/8″ | 0.625 | 4.920 |
7/16″ | 0.560 | 6.72 |
1/2″ | 0.740 | 8.880 |
9/16″ | 0.930 | 11.16 |
5/8″ | 1.150 | 13.80 |
11/16″ | 1.390 | 16.68 |
3/4″ | 1.660 | 19.92 |
13/16″ | 1.950 | 23.40 |
7/8″ | 2.300 | 27.60 |
15/16″ | 2.625 | 31.20 |
1″ | 2.90 | 34.80 |
1-1/16″ | 3.30 | 39.60 |
1-1/8″ | 3.700 | 44.40 |
1-1/4″ | 4.625 | 55.20 |
1-5/16″ | 5.100 | 61.20 |
1-3/8″ | 5.625 | 67.20 |
1-7/16″ | 6.100 | 73.20 |
1-1/2″ | 6.625 | 79.20 |
1-5/8″ | 7.800 | 93.60 |
1-3/4″ | 9.030 | 108.36 |
1-7/8″ | 10.400 | 124.80 |
2″ | 11.80 | 141.60 |
2-1/4″ | 14.920 | 179.04 |
2-3/8″ | 16.920 | 203.04 |
2-1/2″ | 18.42 | 221.04 |
3″ | 26.53 | 318.36 |
ASME SB164 Monel Round Bar Processing
- Heat Resistance
- Welding
- Heat Treatment
- Cold Working
- Machining
- Hot Working
- Fabrication
Monel Bar stock
|
|
Weight Chart of Monel Round Bar
| Round Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
| 3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
| 16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 | ||||||
Length of Monel Tig Rod
- Metric system: standard length is 9 - 12 metres
- USA : 40 feet