Get A Quote

Nickel Alloy Round Bar

  • Home
  • Nickel Alloy Round Bar

ASTM B160 Pure Nickel Rod and Ni 200 Round Bar supplier in India

 

Nickel Alloy Round Bar
Nickel Alloy Round Bar
Nickel 200 Hex Bar
Nickel 200 Hex Bar
Alloy 201 Flat Bar
Alloy 201 Flat Bar

 

Find your size in our Pure Nickel Bar Stock in India, exporter and supplier of UNS N02200 Alloy 200 Round Bar and Rods in Mumbai

 

Nickel 200 Round Bar is commercially pure wrought nickel. It has excellent resistance to many corrosive environments and good mechanical properties. Other useful features of the alloy are its magnetic properties, high electrical and thermal conductivities, low vapor pressure and low gas content.

Nickel 200 Rod corrosion resistance makes it specifically useful for maintaining product purity in the handling of foods, caustic alkalies and synthetic fibers, and also in structural applications where corrosion resistance is the major consideration. Other applications consists electrical and electronic parts, chemical shipping drums, missile and aerospace parts. Nickel 201 Round Bar is a commercially pure wrought alloy which has similar properties to that of nickel 200 round bar, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures.

ASTM B160is resistant to alkalis and acids, and dry gases at room temperature. It is also resistant to mineral acids depending on the concentration and temperature of the solution. Nickel Round Bar is a solid straight bar or plank like stock form of comprised of predominantly of a high purity form of the element known as nickel, or Ni. The common grades of Nickel Alloy Round Bar are nickel 200, nickel 500, Inconel 600, Inconel 718, Hastelloy C276, Cupro Nickel, Monel K500 and Monel R405.

Nickel Flat Baris a building support material. Which are generally used for support braces, duct work, overhead doors, heaters and bracing, etc. Nickel Square Bar is used in many industries for general assembly or manufacturing. It is also used for general repairs of railings and plant equipment. Pure Nickel Rod is resistant to corrosion in water or air, and therefore is used as a protective coating. It is hard yet ductile and due to this reason it is used as a strengthening component in metal alloys.

 

Table of Content


Nickel Alloy Round Bar Specification

Specification ASTM B160/ ASME SB160
Round bar size Diameter: 3-~800mm
Hex Bar size 2-100mm A/F
Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Square bar size 4 to 100mm
Angle bar size (in mm) 3*20*20~12*100*100
Section 3.0 to 12.0mm thickness
Channel Bar (in mm) 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness
Hollow Bar (in mm) 32 OD x 16 ID to 250 OD x 200 ID)
Billet Size 1/2" to 495mm Diameter
Rectangles Size 33 x 30mm to 295 x 1066mm
Manufacturing Technique Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Processing Bar cutting to 650mm
Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Condition Hardened & tempered, annealed

Nickel 200 Round Bar Price in India

Price list of Nickel 200 Round Bar in India Nickel 200 Bar Price in India (INR) Nickel 200 Rod Price in UK Pound sterling Pure Nickel 200 Round Bar Price in UAE Dirham
ASTM B160 NI200 NICKEL ROD, DIA:8X2020 MM INR 2,809/kg 30.35 UK Pound sterling 145.18 UAE Dirham
UNS N02200 NICKEL ALLOY ROUND BAR (NI 200) ASTM B160-05 INR 1,221/kg 13.19 UK Pound sterling 63.11 UAE Dirham

 

Best price of Nickel Square Bar ex Mumbai, Stockist and supplier of Polished & Brushed Alloy 201 Flat and Hex Bar in India

 

Different Types of Nickel 200/ 201 Hex Bar

ASTM B160 Pure Nickel Black Bar

ASTM B160 Pure Nickel Black Bar

Nickel ASTM B160 Polished Bar

Nickel ASTM B160 Polished Bar

2.4066 Nickel 200 Annealed Bar

2.4066 Nickel 200 Annealed Bar

UNS N02200 Nickel 200 Square Bar

UNS N02200 Nickel 200 Square Bar

200 Nickel Alloy Hex Bar

200 Nickel Alloy Hex Bar

Nickel Alloy Ni-201 Polished Bar

Nickel Alloy Ni-201 Polished Bar

Ni 201 Alloy Black Bar

Ni 201 Alloy Black Bar

Nickel 201 ASTM B160 Flat Bar

Nickel 201 ASTM B160 Flat Bar

Nickel Alloy Round Bar Condition

H&T Hardened and tempered.
ANN Annealed
PH Precipitation hardened.

 

Buy your sizes from our DIN 2.4066 Bright Bars, pump shaft, cold / hot rolled black bar

 

An Indian Manufacturer but Global supplier of nickel alloy round bar, check what and where

Philippines, Chile, Canada, Iran Nickel Alloy Hot Rolled Round Bar with High Quality
Europe, United Arab Emirates (UAE), Romania, Norway Nickel Alloy N07718 Round Bar
Sweden, Netherlands,  Malaysia, Russia 99.9% Purity Nickel Alloy 200 Round Bar
Malaysia, Egypt, Los Alamos -Mexico Nickel 200/Alloy 200 Cold Drawn Nickel Round Bar
Singapore, United Kingdom -UK, NY 12203 (USA), Malaysia ASTM B 160 Nickel 200 201 Pure Nickel Round Bar
Dammam -KSA, UK, Philippines, Poland Nickel 200 N6 Uns N02200 W. Nr 2.406 Round Bar
Qatar, Singapore, Europe, Malaysia pure Nickel rod ASTM NO2200
Czechia, Malaysia, Thailand, Japan Nickel Bright Round Bars 100 200 300mm
 Malaysia, China, Bangladesh, Colombia Dia. 25.4 mm Nickel 200 Bar
South Africa, Philippines, Kuwait, Taiwan Ni200/Ni201 Bright Round Rod/Bar Nickel
Bahrain, Malaysia, Singapore, South Korea Nickel 201/N02201/N02200/Ni200 Bright Surface Round Rod
Philippines, Belgium, UK, Indonesia Ni201 Ni200 Nickel Ingots
Oman, Thailand, Hong Kong, France Black Bright 201 Stainless Steel Bar for Industrial Pipe
Germany, Malaysia, Turkey Pure Nickel 200 Rod Uns No2200 Bar for Steam Machine

 

Available Surface finish of Nickel ASTM B160 Polished Bar

CD Cold drawn P Polished
BD Bright drawn SRE Slit rolled edge
CG Centreless ground HF Hot finished
CF Cold finished HRAP Hot rolled annealed and pickled
P&T Peeled and turned RT Rough turned/peeled
ST Smooth turned PR Peeled and reeled

Size Range of 2.4066 Nickel 200 Annealed Bar

Metric US Bar ASTM/ Canadian Japanese
Bar Size Diam. (mm) Bar Size Diam. (Inch) Bar Size Diam. (mm2) Bar Size Diam. (mm)
5 5 #2 0.250 10M 100 6 6
5.5 5.5 #3 0.375 15M 200 10 10
6 6 #4 0.500 20M 300 13 13
7 7 #5 0.625 25M 500 16 16
8 8 #6 0.750 30M 700 19 19
9 9 #7 0.875 35M 1000 22 22
10 10 #8 1.000 45M 1500 25 25
11 11 #9 1.125 55M 2500 29 29
12 12 #10 1.250 32 32
14 14 #11 1.375 35 35
16 16 #12 1.500 38 38
18 18 #13 1.625 41 41
20 20 #14 1.750 44 44
22 22 #15 1.875 48 48
25 25 #16 2.000 51 51
28 28 #18 2.250 57 57
32 32
36 36
40 40
44 44
50 50

 

DIN 2.4068 Bar in cut to sizes, Supplier of Nickel Silver Round Bar as per International standard

 

Chemical Structure of ASTM B160 Pure Nickel Black Bar

Grade Ni Fe C Mn Si Cu Mg Ti S
Nickel 201 99.0 Min 0.4 Max 0.02 Max 0.35 Max 0.2 Max 0.25 Max 0.15 Max 0.1 Max 0.01 Max
Nickel 200 99.0 Min 0.4 Max 0.15 Max 0.35 Max 0.1 Max 0.25 Max - - 0.01 Max

Mechanical Properties Chart of Ni Alloy Black Bar

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 G/Cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent material of Nickel Alloy Hex Bar

Alloy DN-Trade Name Material-No. UNS-No. ASTM Specification DIN Specification
Nickel 200 R-Nickel 99.2 2.4066 N02200 ASTM B160 DIN 17740
Nickel 201 NR-Nickel 99 2.4068 N02201 ASTM B160 DIN 17740
Ni99.6 BR- Nickel 99.6 2.4060 DIN 17740
LC-Ni99.6 NR-Nickel 99.6 2.4061 DIN 17740

Alloy 200/ 201 Round Bar Tolerances

Tolerances for Cold Drawn
Shape / Section Size, diameter or width across flats Permitted variation
mm mm
Round ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140
Flat (thickness) < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.250, + 0 to - 0.350
Flat (width) < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.190, + 0 to - 0.220, + 0 to - 0.350, + 0 to - 1.00, + 1.00 to - 1.00
Square and, hexagon ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 + 0 to - 0.090, + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.250

Tolerances of Turned Ni 201 Alloy Black Bar

Turned Tolerances
Size, diameter Permitted variation
mm mm
≧ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 120, > 120 ≦ 180, > 180 ≦ 250, > 250 ≦ 315, > 315 ≦ 400, > 400 + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140, + 0 to - 0.160, + 0 to - 0.185, + 0 to - 0.210, + 0 to - 0.230, + 0 to - 0.250

Tolerances of Precision UNS N02200 Round Bar

Precision Tolerances
Section Size,, diameter Permitted overall variation
Class A Class B Class C
mm mm mm mm
Round ≧ 6 <75 0.05 0.025 0.013

Tolerance of Nickel 201 Bright Round Bar (BS EN ISO 286-2 )

Tolerance ISO “H” Series in MM
NOMINAL SIZE h5 h6 h7 h8 h9 H10 H11 h12
DIAMETER mm
~ to 3 +0.004/0 +0.006/0 +0.01/0 +0.014/0 +0.025/0 +0.04/0 +0.06/0 +0.1/0
over 3 to 6 +0.005/0 +0.008/0 +0.012/0 +0.018/0 +0.03/0 +0.048/0 +0.075/0 +0.12/0
over 6 to 10 +0.006/0 +0.009/0 +0.015/0 +0.022/0 +0.036/0 +0.058/0 +0.09/0 +0.15/0
over 10 to 18 +0.008/0 +0.011/0 +0.018/0 +0.027/0 +0.043/0 +0.07/0 +0.11/0 +0.18/0
over 18 to 30 +0.009/0 +0.013/0 +0.021/0 +0.033/0 +0.052/0 +0.084/0 +0.13/0 +0.21/0
over 30 to 50 +0.011/0 +0.016/0 +0.025/0 +0.039/0 +0.062/0 +0.1/0 +0.16/0 +0.25/0
over 50 to 80 +0.013/0 +0.019/0 +0.03/0 +0.046/0 +0.074/0 +0.12/0 +0.19/0 +0.3/0
over 80 to 120 +0.015/0 +0.022/0 +0.035/0 +0.054/0 +0.087/0 +0.14/0 +0.22/0 +0.35/0
over 120 to 180 +0.018/0 +0.025/0 +0.04/0 +0.063/0 +0.1/0 +0.16/0 +0.25/0 +0.4/0
over 180 to 250 +0.02/0 +0.029/0 +0.046/0 +0.072/0 +0.115/0 +0.185/0 +0.29/0 +0.46/0

 

Pure Nickel Round Bar Length

  • Metric system: standard length is 9 - 12 metres
  • USA : 40 feet

 

Nickel Rod Stock List
item name Diameter Alloy Density
1/4 Inch Diameter 1/4 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
9/32 Inch Diameter 9/32 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
5/16 Inch Diameter 5/16 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
11/32 Inch Diameter 11/32 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
3/8 Inch Diameter 3/8 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
13/32 Inch Diameter 13/32 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
7/16 Inch Diameter 7/16 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
15/32 Inch Diameter 15/32 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
1/2 Inch Diameter 1/2 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
17/32 Inch Diameter 17/32 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
9/16 Inch Diameter 9/16 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
19/32 Inch Diameter 19/32 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
5/8 Inch Diameter 5/8 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³
21/32 Inch Diameter 21/32 inches Alloy 200/201 8.89 lbs/in³0.321 g/cm³

 

Weight Chart of Nickel Round Bar

SIZE IN INCHES LENGTH IN INCHES WGHT./FT.
.500 120/216 0.749
.750 120/216 1.686
.875 120/216 2.295
1.250 120/216 4.683
1.375 120/216 5.666
1.500 120/316 6.743
1.750 120/216 9.179
2.000 120/216 11.988
2.250 120/216 15.173
2.500 120/216 18.732
2.750 120/216 22.665
2.875 120/216 24.773
3.000 120/216 26.974
3.250 120/216 31.657
3.500 120/216 36.714

 

Nickel Round Bar Delivery Condition

  • Peeled and polished
  • Trailed center less ground & polished
  • Cold drawn
  • Smooth Turned & Polished
  • Turned & rough polished
  • Peeled, center less ground & polished
  • The strain Hardened
  • Hardened strain
  • Annealed
  • Solenoid quality

 

Pure Nickel Alloy Round Bar Testing

• PMI/IGC test
• Flattening/flaring test
• Hydrostatic/radiography test
• Mechanical/chemical test
• Hardness test
• Macro/micro test