UNS S32750 Round Bar
Astm A276 F53 Rod & Hex Bar manufacturer in India.
A round bar is a cylindrical metal bar having a 5mm to 450mm radius of length 2 to 6 meters. The bar and rods are available in hexagonal and square shapes as well. One such is, UNS S32750 round bar which is equivalent to Werkstoff NR 1.4410. It comes with a 10 to 100 mm diameter, the ultimate tensile strength of 750 ksi and can take minimum stress of 550 N/mm2.
Super Duplex UNS S32750 Bars have high resistance to corrosion fatigue and chlorine ions. These bars are heat-treated at 1100 degrees Celsius followed by water quenching. They come in different standards, one such is ASTM A479 UNS S32750 Hex Bar comes with different tolerance levels e.g. H8 - H12, K10 to K12 and has a high tensile strength of 730 MPa. These bars are used in the marine and petrochemical industries.
F53 round bar is a high alloy duplex stainless steel with austenitic and ferritic microstructure. They are used for applications flame hardening for surface hardness is required with the common standard of ASTM A182 F53. Another bar standard UNS S32750 F53 Rods has high fatigue strength of 450 MPa and an elastic modulus of 200 GPa. Further, it has a high melting point of about 1410 degrees Celsius. F53 is the common industry name for UNS S32750 stainless steel. Industries use ASTM A276 F55 Duplex Round Bar for its high mechanical strength and resistance to pitting and crevice corrosion. It has proof stress equivalent to 550 MPa and a 23% elongation rate. It has applications in power generation, heat exchangers, and seawater applications.
F53 or S32750 bars are duplex stainless steel but they use less tungsten than S32760 due to their specific requirement. These bars have the size in the range of 6mm to 120 mm and length varies from 100 to 600 mm.
UNS S32750 Round Bar
ASTM A276 F53 Rod
Werkstoff Nr. 1.4410 Flat Bar
F53 Super Duplex Square Bar
Super Duplex S32750 Bright Bar
We help you to save your cost by providing exact size of ASTM A479 DIN 1.4410 Flat Bar and Square Bar.
Table Of Content
- UNS S32750 Round Bar Material Specification
- ASTM A479 F53 Bar Price List
- Available Surface Finish Of ASME SA276 UNS S32750 Hexagonal Bar
- Condition Of Super Duplex Stainless Steel S32750 Flat Bar
- Standard Dimensions Of A479-S32750 Round Bar
- Size Chart Of UNS S32750 Super Duplex Hex Bar
- ASTM A276 F53 Rod Tolerance Chart As Per BS 970-3
- S32750 F53 Super Duplex Square Bar Schedule Chart
- Super Duplex F53 Bright Bar Chemical Composition
- Werkstoff Nr. 1.4410 Angle Bar Mechanical Characteristics
- S32750 Hollow Bar Equivalent Table
- One Of India’s Largest Supplier Of UNS S32750 Round Bar In India
| Specification Of: | UNS S32750 Round Bar |
|---|---|
| Grade And UNS Number | AMS 5665 And ASTM B166/ UNS S32750 |
| Size Chart | Round Bars (Daimeter 3-~800 Millimeter), Hex Bars (2-100mm (Millimeter) A/F), Flat Bars (2 -100mm (Millimeter), Square bars (4 to 100 Millimeter), Angle Bars (3*20*20~12*100*100 In MM)) |
| Type Of Super Duplex Steel S32750 Bar | Round Bars/ Hex Bars/ Flat Bars/ Square bars/ Angle Bars/ Channel Bars |
| Bar Standard | ASTM/ASME B166 And AMS 5513, AMS 5647 Or AMS 5511 |
| Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
| Standard Dimensions Of | BS/ ASME/ AISI/ EN/ DIN/ JIS/ ASTM |
| Surface Area | Cold Drawn/ Polished And Hairline/ Bright |
| Type Of Finish | Smooth Turned/ Cold (bright)/ Drawn Hot Rolled/ Centreless Ground |
| Size Of Rectangles | 33 x 30 millimeter to 295 x 1066 millimeter |
| Technique Use To Making Bar | Cold Rolled/ Forged Round Bar/ Cold Drawn/ Rod/ Hot Rolled |
| Cutting Processing | Bars Cutting To 650 millimeter |
| Outside Daimeter Of Hollow Bar | 32 Outside Daimeter x 16 Inside Daimeter to 250 Outside Daimeter x 200 Inside Daimeter In MM) |
| We Maintain Good Quality Stock Of ASTM A276 F53 Round Bar | Puchong, Riyadh, Santiago, Hanoi, Shah-Alam, Nashik, Bogota, Baku, Dallas, Pimpri-Chinchwad, Perth, Hangzhou, Dhaka, Tiruchirappalli, Panipat, Agra, Tehran, Nagpur, Kochi, Mexico-City, Ajman, Paris, Seoul, Hazira, Istanbul, Lucknow, Pune, Ankleshwar, Calgary, Milan, Melbourne, Amsterdam, Coimbatore, Madrid, Dubai, New-Delhi, Jamshedpur, Oyama, Navi-Mumbai, Abu-Dhabi, Houston, Sydney, Jaipur, Quezon-City, Vapi, Vasai-Virar, Vadodara, Cairo, Kolkata, Indore, Gurgaon, Ashburn, Shanghai, Noida, Hyderabad, Rajkot, Manama, Zhengzhou, Dammam, Ghaziabad, Bengaluru, Lagos, Al-Khobar, Doha, Delhi, Chennai, Beijing, Karachi, Visakhapatnam, Chandigarh, Mysuru, Alexandria, Johor-Bahru, Bhopal, Patna, Guwahati, London, Al-Jubail, Chicago, Jamnagar, Kota, Mumbai, Ludhiana, Dombivli, Sharjah, Jeddah, Singapore, Surat, Jakarta, Kalyan, Bangkok, Raipur, Ho-Chi-Minh-City, Busan, Batam, Surabaya, Brisbane, Kuala-Lumpur, Ambernath, Faridabad, Bhubaneswar, Ahmedabad, Vung-Tau, Sao-Paulo, Thane, Secunderabad, |
Check weight, size chart and Price list of ASME SA 276 Super Duplex UNS S32750 Forged Bar Ex Mumbai.
| Size | Grade | Price In INR Per Unit |
|---|---|---|
| Size :50mm Diameter X 500 Mm | Super Duplex | 764.00 |
| Size :60mm Diameter X 400 Mm | Super Duplex | 589.00 |
Whether You're Looking For UNS S32750 Round Bar in India. For final UNS S32750 Rod Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.
| Cold drawn | CD | Polished | P |
| Bright drawn | BD | Slit rolled edge | SRE |
| Centreless ground | CG | Hot finished | HF |
| Cold finished | CF | Hot rolled annealed and pickled | HRAP |
| Peeled and turned | P And T | Rough turned/peeled | RT |
| Smooth turned | ST | Peeled and reeled | PR |
| Hardened and tempered | H And T |
| Annealed | ANN |
| Precipitation hardened | PH |
| UNS S32750 Round Bar Dimensions | |||||||
|---|---|---|---|---|---|---|---|
| Size Of Metric | US Bar Standard | Canadian Standard | Japanese Standard | ||||
| Size Of Bar | Daimeter In (millimeter) | Bars Size | Daimeter In (Inches) | Bars Size | Daimeter In (millimeter2) | Bars Size | Daimeter In (millimeter) |
| 5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
| 5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
| 6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
| 7 | 7 | #5 | 0.600 | 25M | 500 | 16 | 16 |
| 8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
| 9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
| 10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
| 11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
| 12 | 12 | #10 | 1.250 | 32 | 32 | ||
| 14 | 14 | #11 | 1.375 | 35 | 35 | ||
| 16 | 16 | #12 | 1.500 | 38 | 38 | ||
| 18 | 18 | #13 | 1.600 | 41 | 41 | ||
| 20 | 20 | #14 | 1.750 | 44 | 44 | ||
| 22 | 22 | #15 | 1.875 | 48 | 48 | ||
| 25 | 25 | #16 | 2.000 | 51 | 51 | ||
| 28 | 28 | #18 | 2.250 | 57 | 57 | ||
| 32 | 32 | ||||||
| 36 | 36 | ||||||
| 40 | 40 | ||||||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
| Type Of Bars | Size In Millimeter | Size In Inches | Tolerance In ISO |
|---|---|---|---|
| Cold Drawn ; Polish Round Bars | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
| Cold Drawn ; Ground Bars | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
| Peeled ; Polished Round Bars | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
| Peeled ; Ground Bars | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
| Cold Drawn Tolerances | ||
|---|---|---|
| Shape And Section | Diameter And Size & width Across Flat | Permitted variation |
| millimeter | millimeter | |
| Round | ≥6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100 | + 0 to - 0.070, + 0 to - 0.085, + 0 to - 0.100, + 0 to - 0.120, + 0 to - 0.140 |
| Flats (thick.) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.250, + 0 to - 0.350 |
| Flats Bar (width Of Bar) | < 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 100, > 100 ≦ 130, > 130 ≦ 160, > 160 ≦ 320 | + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.190, + 0 to - 0.220, + 0 to - 0.350, + 0 to - 1.00, + 1.00 to - 1.00 |
| Square Bar and, hexagon Bar | ≥ 6 ≦ 18, > 18 ≦ 30, > 30 ≦ 50, > 50 ≦ 80, > 80 ≦ 105 | + 0 to - 0.090, + 0 to - 0.110, + 0 to - 0.130, + 0 to - 0.160, + 0 to - 0.250 |
| Size In Millimeter | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr | Size | Kilogram And Foot | Kilogram And Mtr |
|---|---|---|---|---|---|---|---|---|
| 3millimeter | 0.017 | 0.055 | 20millimeter | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22millimeter | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4millimeter | 0.030 | 0.098 | 24millimeter | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25millimeter | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5millimeter | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26millimeter | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6millimeter | 0.068 | 0.223 | 27millimeter | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7millimeter | 0.091 | 0.298 | 30millimeter | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8millimeter | 0.120 | 0.398 | 32millimeter | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9millimeter | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35millimeter | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10millimeter | 0.189 | 0.620 | 36millimeter | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11millimeter | 0.228 | 0.748 | 38millimeter | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12millimeter | 0.271 | 0.889 | 40millimeter | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13millimeter | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14millimeter | 0.368 | 1.207 | 45millimeter | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15millimeter | 0.424 | 1.391 | 48millimeter | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50millimeter | 4.698 | 15.414 | |||
| 16millimeter | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17millimeter | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18millimeter | 0.610 | 2.001 | 60millimeter | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 |
| Element | UNS S32750 Round Bar |
| P | 0.035 |
| S | 0.020 |
| Ni | 6.00/8.00 |
| N | 0.24/0.32 |
| Other | Cu:0.50 |
| Cr | 24.0/26.0 |
| C | 0.030 |
| Si | 0.80 |
| Mn | 1.20 |
| Mo | 3.0/5.0 |
Buy your sizes from our uns S32750 Bright Bars, pump shaft, cold / hot rolled black bar.
| Element | UNS S32750 Round Bar |
| Proof Stress 0.2% (MPa) | 550 |
| Hardness Max (HB-HRB) | 310-32* |
| Tensile Strength(MPa) | 795 |
| Elongation A5(%) | 15 |
Get F53 round bar in cut to sizes, Supplier of DIN 1.4410 Threaded Bar as per International standard.
| STANDARD | UNS | WERKSTOFF NR. |
| UNS S32750 Round Bar | S32750 | 1.4410 |
ASTM A479 UNS S32750 Round Bars
ASTM A276 F53 Duplex Bars
A276 S32750 Hollow Bars
UNS S32750 F53 Bars
UNS S32750 F53 Hexagonal Bars
Super Dulex F53 Round Bar
ASME SA479 S32750 Square Bar
SA276 S32750 Hollow Bar
No Matter Where The Location, Recently We Have Successfully Supplied UNS S32750 Round Bar To The Following Countires
| UNS S32750 Round Bar | Indonesia, Belgium, Dammam -KSA, Philippines. |
| ASTM A276 UNS S32750 Bars | Singapore, Malaysia, Canada, Philippines |
| Super Duplex F53 Flat Bars | Europe, Romania, Japan, Malaysia |
| UNS S32750 F53 Rod | Czechia, Malaysia, Germany, Thailand |
| Super Duplex F53 Hex Bars | Malaysia, USA, Finland, Bangladesh |
| ASTM A276 F53 Super Duplex Bars | Malaysia, Sweden, Colombia, China |
| A276 S32750 Hollow Bars | Netherlands, Russia, Dubai, Malaysia |
| UNS S32750 F53 Hexagonal Bars | Saudi Arabia (KSA), Kuwait, South Africa, Brazil |
| UNS S32750 F53 Super Duplex Round Bars | Nigeria, Australia, Philippines, UK |
| ASTM A276 F53 Rod | Malaysia, Hong Kong, Oman, UAE |
| ASTM A479 UNS S32750 Flat Bars | Iran, Chile, Italy, Singapore |
| SB 276 F53 Super Duplex Steel Hex Bar | Spain, UK, Egypt, Mexico |
| F53 Super Duplex Square Bars | Poland, Canada, Ellington -United States, UK |
| DIN 1.4410 Bright Bar | Thailand, Europe, France, Qatar |