Table of Content
Specification | ASTM A276/ ASME SA276 |
---|---|
Round bar size | Diameter: 3-~800mm |
Hex Bar size | 2-100mm A/F |
Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Square bar size | 4 to 100mm |
Angle bar size (in mm) | 3*20*20~12*100*100 |
Section | 3.0 to 12.0mm thickness |
Channel Bar (in mm) | 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
Hollow Bar (in mm) | 32 OD x 16 ID to 250 OD x 200 ID) |
Billet Size | 1/2" to 495mm Diameter |
Rectangles Size | 33 x 30mm to 295 x 1066mm |
Manufacturing Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Processing | Bar cutting to 650mm |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
Condition | Hardened & tempered, annealed |
ASME Sa479 S31803 Rounds
UNS S31803 Flat Bar
ASTM A479 S31803 Rebar
Duplex Steel UNS S31803 Hex Bar
ASTM A479 UNS S31803 Threaded Bar
ASME SA479 UNS S31803 Precision Ground Bar
UNS S31803 Hollow Bar
Duplex Steel UNS S31803 Hexagonal Bar
Description | Price Per Unit (INR) | Price in USD | Price in EURO |
---|---|---|---|
UNS S31803 Round Bar (Hot Worked Rolled),mbr-sanmac2205-35 Fl-1-1700 | 512 | 6.95 | 5.81 |
UNS S31803 Round Bar (Hot Worked Rolled),mbr-sanmac2205-40 Fl-1-1250 | 512 | 6.95 | 5.81 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
---|---|---|---|---|---|---|---|---|---|---|
S31803 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|
7.8 g/cm3 | 1440 °C (2625 °F) | Psi – 90000 , MPa – 620 | Psi – 65000 , MPa – 450 | 30 % |
STANDARD | UNS | WERKSTOFF NR. |
Duplex 2205 | S31803 | 1.4462 |
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
H&T | Hardened and tempered. |
ANN | Annealed |
PH | Precipitation hardened. |
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
---|---|---|---|---|---|---|---|
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.625 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |