Generally the ASTM A193 GRADE B7 Bolts have been coated to enhance, impart or improve the corrosion resistance properties of the SA193 B7 Bolt material. Although it is important to note that A193 B7 U-Bolt coated bolts might not be able to withstand the high temperatures as compared to the elevated temperatures the uncoated Washers for ASTM A193 Bolts can be subjected to. These ASTM A193 B7 Bolts & B7 Bolt Material are could also be available in either hot-dip galvanized, zinc plated, PTFE coated, or otherwise Xylan coated.
The ASTM A193 GRADE B7 Bolts specification covers both alloy steel and stainless steel bolting material for e.g. – the Bolt And Nut ASTM A193 Grade B7 Specification which are meant for equipment’s such as - pressure vessels, valves, flanges, and fittings. According to the specifications, the A193 B7 Eye Bolt, B7 Anchor Bolts and other ASTM A193 B7 Material can be used for either or both high temperature or high pressure service. The ASTM A193 Gr B7 Material could also be applied to other special purposes.
Table of Content
The A193 B7m Specification covers both alloy steel as well as stainless steel ASTM A193 Grade B7M Bolts meant for use in pressure vessels, valves, flanges, and fittings, According to the PDF of A193 B7m Studs, the components produced from this specification could be used for either or both high temperature or high pressure service, or the SA 193 Gr B7m Bolts could also be used in cases of other special purpose applications. Ferritic steels that fall under the ASTM A193 Grade B7m Bolts specification must be properly heat treated in such a manner that it best suits the high temperature features of each grade. Immediately after rolling or forging, the bolting ASTM A193 B7m Bolts material has to be allowed to cool to a temperature under the cooling transformation range. The chemical composition requirements for each of the A193 B7m Bolts has been presented in detail.
Ferritic steels that fall under the ASTM A193 B7 Hex Bolts need to be properly heat treated. The heat treatment given to the ASTM A193 B7 Heavy Hex Bolts in such a way that it best suits the high temperature characteristics or the A193 B7 Hex Head Bolt Material Properties of each grade. Immediately after rolling or forging, the bolting ASTM -A193 Gr B7 Hex Bolt Equivalent material must be allowed to be cooled to a temperature below the cooling transformation range of the ASTM A193 B7 Hex Bolt. These ASTM A193 B7 Hex Bolts and Nuts are could also be available in either hot-dip galvanized, zinc plated, PTFE coated, or otherwise Xylan coated.
We manufacture ASTM A193 stud bolts in national coarse (UNC) thread pitches, mainly used in traditional applications. A193 Flange Stud Bolt have 8 threads per inch (“thread per inch”) for rod diameters above 1 inch. B7 Studs is the most common specification grade for stud bolts. The chemical composition ASTM A193 B7 Studs requirements for each alloy has been presented in detail in our website. The SA 193 B7 2H Stud Bolts should not contain an unspecified element for ordered grade to the extent that the ASTM A193 B7 Stud material conforms to the requirements of another grade for which that particular element is a specified element.
ASTM A193 B7 Threaded Rod, and threaded studs are manufactured from a chromium- molybdenum based steel. The SA 193 gr B7 Acme Rod has been quenched and tempered or heat treated. Heat treating the ASTM A193 Grb7 Metric Rod aids in the rods to develop the desired mechanical ASTM A193 Grade B7 Threaded Rod Properties such as good tensile strength. ASTM A193 Grade B7 Threaded Bar is the most common grade of the A193 specification bolts used in construction.
Standard | DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards |
---|---|
Size | M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160 |
Length | 3 mm to 200 mm |
Studs Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: | ANSI - American National Standards Institute
DIN: 931, 933, 934, 970 UTS - Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO - International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
Bolts In Form of: | Hex, Square, Round, Threading as per Gauge Etc. |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
Thread | Metric Coarse |
Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
finishing: | Zinc (yellow, white, blue, black), black oxide, , Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated, Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Mechanically Applied coating and some special one like DACROMET |
Production process | M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
Bolts types | Hex Bolts, Flange Bolts, Hex Head Bolts, Lag Bolts, Square Bolts, Eye Bolts, U Bolts, T Bolts, Counter sunk Bolts etc. |
Nut types | Hex Head Nut, Eye Nut, Dome Nut, Wing Nut, T Nut, Panel Nut, Lock Nut, Coupling Nut, Square Nut, Acorn Nut etc. |
Screws types | Hex Head Cap Screws, Socket Set Screws, Anchor Screws, Blind Rivet, Socket Head Screws, Concrete Screws, Shoulder Screws, Panel Screws, Threaded Screws, Machine Screws etc. |
Washers Types | Machine Washers, Flat Washer, Star Washers, Sealing Washer, Lock Washer, Split Washer |
Packing: | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Price list of ASTM A193 Grade B7M Bolts manufacturer in India | Price in India (INR) | Price in UK Pound sterling (per pcs) | Price in UAE Dirham (per pcs) |
---|---|---|---|
PTFE COATED M14 X 100MM ASTM A193 B7M STUD BOLT C/W 2- NUTS | 167/pcs | 1.81 | 8.63/ UAE Dirham |
PTFE COATED 1/2 X 70MM A193 B7M STUD BOLT C/W 2- 2HM NUTS, GREEN, AS PER MESC 81/007 | 369/pcs | 3.99 | 19.08/ UAE Dirham |
ASTM A193 GR. B7 STUD WITH 2 NUTS, M22 X 115MM LONG, FULL THREADED | 198 | 2.14 | 10.24 UAE Dirham |
Stud Bolt A193 Gr B7 , 80MM 1/2 IN | 40 | 0.43 | 2.07 UAE Dirham |
B7 Hex Bolts | 197 | 2.13 | 10.19 UAE Dirham |
ASTM A193 B7 Threaded Rod Full, OXIDE BLACK FINISH M22-2.5X6-BL | 51 | 0.55 | 2.64 UAE Dirham |
ASTM A193 Grade B7 Bolts and Set Screws
ASTM A193 B7m Socket Head Screws
Alloy Steel ASTM A193 B7m Nace Nuts
ASTM A193 Gr B7m Washers
Alloy Steel ASTM A193 Gr B7 Threaded Rod
ASTM A193 B7m Stainless Steel Machine Screws
Stainless Steel ASTM A193 b7m Self Tapping Screws
ASTM A193 Gr B7 Alloy Steel Self Drilling Screws
Element | Range | Tolerance +/- | Range | Tolerance +/- |
Carbon | 0.37 - 0.49 | 0.02 | 0.36 - 0.44 | 0.02 |
Manganese | 0.65 - 1.10 | 0.04 | 0.45 - 0.70 | 0.03 |
Phosphorus, max | 0.035 | 0.005 over | 0.035 | 0.005 over |
Sulfur, max | 0.040 | 0.005 over | 0.040 | 0.005 over |
Silicon | 0.15 - 0.35 | 0.02 | 0.15 - 0.35 | 0.02 |
Chromium | 0.75 - 1.20 | 0.05 | 0.8 - 1.15 | 0.05 |
Molybdenum | 0.15 - 0.25 | 0.02 | 0.50 - 0.65 | 0.03 |
Vanadium | - | - | 0.25 - 0.35 | 0.03 |
Aluminum, max% | - | - | 0.015 | - |
Europe, France, Thailand, Qatar | Astm a193 b7 stud bolt |
Dammam -KSA, Philippines, Belgium | m12 high tensile black astm a193 grade b7 stud bolt |
Bangladesh, USA, Finland, Malaysia | DIN912 ASTM A193 B7 B7M Allen Cap Head or Hex Socket Head Bolt |
Thailand, Germany, Malaysia, Czechia | A193 B7/B7M Stud bolt with 2H/2HM nut |
Singapore, South Africa, Singapore, Bahrain | ASTM A193 Grade B7m Hex Bolt with Hex Nut for one set M20*100 thread 50mm |
Kuwait, Saudi Arabia (KSA), Brazil, South Africa | Astm a193 grade b7 transit wheel stud bolt |
Hong Kong, Malaysia, UAE, Oman | ASTM A193 B7 Full Threaded Rod / Stud Bolt |
UK, Australia, Nigeria, Philippines | ASTM A193 gr B7m threaded rod stud bolt |
Norway, Turkey, Malaysia, United Arab Emirates (UAE) | M8 M10 full thread hex head bolt DIN933 |
Iran, Italy, Singapore, Chile | ASTM A193 Grade B7 Steel Threaded Rod / Stud / Bolt / Nut / Washer |
Mexico, Spain, UK, Egypt | Stud Bolt Astm a193 b7m with 2hm Nut |
Russia, Malaysia, Dubai, Netherlands | astm a193 gr b7 stud bolt with 2h heavy hex nut |
Poland, Canada, Ellington -United States, UK | ASTM A193 B7 B7M Black Grade 8.8 M32 Stud Bolt Nuts |
Malaysia, Europe, UAE, United Kingdom -UK | ASTM A193 B7 Stud Bolt Full Thread |
Romania, Japan, Malaysia, Europe | Custom Design Precision Astm A193 B7 M24x1.5 Bolt |
Grade and Class | Diameter | Tensile Strength Min KSI | Yield Strength 0.2% Offset KSI | Elongation in 4D, Min, % | Reduction of Area Min, % | Hardness Max Brinell | Hardness Max Rockwell |
---|---|---|---|---|---|---|---|
B7M | up to 4" incl | 100 | 80 | 18 | 50 | 235 | B99 |
over 4" to 7" | 100 | 75 | 18 | 50 | 235 | B99 |
B7 | Alloy steel | AISI 4140/4142 | quenched and tempered |
ASTM A193 Grade B7m Screws Types | SIZE | GRADE | ASME | ISO | ASTM |
---|---|---|---|---|---|
AISI 316 ASTM A193 Grade B7m Socket Head Cap Screws | M1.6 to M64 | 12.9 | B18.3.1 M | 4762 | A574M |
ASTM A193 B7m Socket Low Head Cap Screws | M4 to M20 | 10.9 | |||
Alloy Steel ASTM A193 B7m Nace Socket Head Shoulder Screws | M6 to M24 | 012.9 | B18.3.3M | ||
ASTM A193 Gr B7m Countersunk Socket Head Screws | M3 to M20 | 012.9 | B18.3.5M | 10642 | F835M |
Alloy Steel ASTM A193 Gr B7m Button Head Socket Screws | M3 to M12 | 012.9 | B18.3.4M | 7380 | F835M |
ASTM A193 B7m Stainless Steel Flange Button Head Socket Screws | M3 to M10 | 012.9 | F835M | ||
ASTM A193 Gr B7m Alloy Steel Knurled Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
SS ASTM A193 b7m Flat Point Socket Set Screws | M6 to M12 | 45H | B18.3.6M | 4026 | F912M |
Stainless Steel ASTM A193 b7m Dog Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4028 | F912M |
ASTM A193 Grade B7m Alloy Steel Cone Point Socket Set Screws | M3 to M12 | 45H | B18.3.6M | 4027 | F912M |
SA 193 Grade B7m Plain Point Socket Set Screws | M3 to M20 | 45H | B18.3.6M | 4029 | F912M |
ASTM A193 Grade B7m SS Taper Pressure Plug | M8 to M22 | - |
Metric ASTM A193 Grade B7M Bolts | Closest Inch |
---|---|
M1.4-0.3 Bolts | 0-80 (L) |
M2-0.4 Bolts | 1-64 (S) |
M2.5-0.45 Bolts | 3-56 (L) |
M3-0.5 Bolts | 4-48 (S) |
M3.5-0.6 Bolts | 6-40 (Same) |
M4-0.7 Bolts | 8-36 (L) |
M5-0.8 Bolts | 10-32 (S) |
M6-1.0 Bolts | 1/4-28 (L) |
M7-1.0 Bolts | 1/4-28 (S) |
M8-1.25 Bolts | 5/16-18 (S) |
M10-1.5 Bolts | 3/8-16 (S) |
M12-1.75 Bolts | 1/2-13 (L) |
M14-2.0 Bolts | 9/16-12 (L) |
M16-2.0 Bolts | 5/8-11 (S) |
M18-2.5 Bolts | 3/4-10 (L) |
M20-2.5 Bolts | 3/4-10 (S) |
M22-2.5 Bolts | 7/8-9 (L) |
M24-3.0 Bolts | 1-8 (L) |
M30-3.5 Bolts | 1 1/8-7 (S) |
M36-4.0 Bolts | 1 3/8-6 (S) |
ASTM A193 Grade B7 Bolts | SS ASTM A193 b7 Foundation Bolts |
AISI 316 ASTM A193 Grade B7 Hex Bolts | ASTM A193 Grade B7 Alloy Steel T-Head Bolts |
ASTM A193 B7 Heavy Hex Bolts | SA 193 Grade B7 Tap Bolts |
Alloy Steel ASTM A193 B7 Nace Flange Bolts | ASTM A193 Grade B7 SS Machine Bolts |
ASTM A193 Gr B7 Square Bolts | SA 193 Gr B7 T-Head Bolts |
Alloy Steel ASTM A193 Gr B7 Eye Bolts | ASTM A193 Gr B7 SS Hex Bolts Din 933 |
ASTM A193 B7 Stainless Steel Hex Head Bolts | SA 193 Grade B7 Alloy Steel Hex Bolt Din 931 |
Stainless Steel ASTM A193 b7 Round Head Bolts | ASTM A193 Grade B7 Hex Bolt Din 934 |
ASTM A193 Gr B7 Alloy Steel Plow Bolts | AISI 316 ASTM A193 Grade B7 Hex Bolt Din 6914 |
SS ASTM A193 b7 Shoulder Bolts | ASTM A193 B7 Hex Bolt Din 912 |
ASTM A193 Grade B7 Alloy Steel Carriage Bolts | Alloy Steel ASTM A193 B7 Nace Hex Bolt Din 601 |
SA 193 Grade B7 Elevator Bolts | ASTM A193 Gr B7 Asme B18.2.1 Heavy Hex Bolts |
ASTM A193 Grade B7 SS Step Bolts | Alloy Steel ASTM A193 Gr B7 Hexagon Flange Bolts Din6921 |
SA 193 Gr B7 J Bolts | ASTM A193 B7 Stainless Steel Eye Bolt Din 444 |
ASTM A193 Gr B7 SS Hanger Bolts | Stainless Steel ASTM A193 b7 Eye Bolt Din 580 |
SA 193 Grade B7 Alloy Steel Draw Bolts | ASTM A193 Gr B7 Alloy Steel Eye Bolt Din 444 B |
ASTM A193 Grade B7 Anchor Bolts | SS ASTM A193 b7 Eye Bolt Din 444 Lb |
AISI 316 ASTM A193 Grade B7 Stove Bolts | ASTM A193 Grade B7 Alloy Steel Hex Head Bolt Din 933 |
ASTM A193 B7 Lag Bolts | SA 193 Grade B7 Hex Head Bolt Din 931 |
Alloy Steel ASTM A193 B7 Nace 12 point Bolts | ASTM A193 Grade B7 Carriage Bolt Din 607 |
ASTM A193 Gr B7 Anchor Bolts | SA 193 Gr B7 Shoulder Bolt Din 7379 |
Alloy Steel ASTM A193 Gr B7 Structural Bolts | ASTM A193 Gr B7 SS Shoulder Bolt Din 9841 |
BOLT, DIA | Torque FT-LBS | ||
30% Initial, Torque | 70%, Torque | 100% Final, Torque | |
1/2 | 16 | 36 | 52 |
9/16 | 23 | 53 | 75 |
5/8 | 31 | 73 | 104 |
3/4 | 55 | 129 | 184 |
7/8 | 71 | 166 | 237 |
1 | 107 | 249 | 356 |
1.1/8 | 127 | 297 | 424 |
1.1/4 | 179 | 417 | 596 |
1.3/8 | 186 | 435 | 622 |
1.1/2 | 246 | 574 | 821 |
1.9/16 | 168 | 392 | 560 |
1.5/8 | 191 | 445 | 636 |
1.3/4 | 240 | 561 | 801 |
1.7/8 | 298 | 696 | 994 |
2 | 366 | 853 | 1219 |
2.1/4 | 529 | 1234 | 1762 |
2.1/2 | 733 | 1709 | 2442 |
2.3/4 | 986 | 2300 | 3285 |
3 | 1289 | 3008 | 4297 |
STUD DIA | Torque FT-LBS | ||
30% Initial Torque | 70% Torque | 100% Final Torque | |
1/2 | 17 | 39 | 55 |
9/16 | 24 | 55 | 80 |
5/8 | 33 | 77 | 110 |
3/4 | 59 | 137 | 195 |
7/8 | 93 | 217 | 310 |
1 | 140 | 325 | 465 |
1.1/8 | 205 | 480 | 685 |
1.1/4 | 288 | 672 | 960 |
1.3/8 | 391 | 915 | 1305 |
1.1/2 | 518 | 1208 | 1725 |
1.9/16 | 588 | 1372 | 1960 |
1.5/8 | 668 | 1558 | 2225 |
1.3/4 | 840 | 1960 | 2800 |
1.7/8 | 1044 | 2436 | 3480 |
2 | 1280 | 2985 | 4265 |
2.1/4 | 1850 | 4315 | 6165 |
2.1/2 | 2565 | 5985 | 8550 |
2.3/4 | 3121 | 7282 | 10400 |
3 | 4080 | 9520 | 13600 |
STUD DIA | Torque Nm | ||
30% Initial Torque | 70% Torque | 100% Final Torque | |
1/2 | 23 | 53 | 75 |
9/16 | 33 | 75 | 108 |
5/8 | 45 | 104 | 149 |
3/4 | 80 | 186 | 264 |
7/8 | 126 | 294 | 420 |
1 | 190 | 441 | 630 |
1.1/8 | 278 | 651 | 929 |
1.1/4 | 390 | 911 | 1302 |
1.3/8 | 530 | 1241 | 1769 |
1.1/2 | 702 | 1638 | 2339 |
1.9/16 | 797 | 1860 | 2657 |
1.5/8 | 906 | 2112 | 3017 |
1.3/4 | 1139 | 2657 | 3796 |
1.7/8 | 1415 | 3303 | 4718 |
2 | 1735 | 4047 | 5783 |
2.1/4 | 2508 | 5850 | 8359 |
2.1/2 | 3478 | 8115 | 11592 |
2.3/4 | 4232 | 9873 | 14101 |
3 | 5532 | 12907 | 18439 |
NPS | STUD BOLTS DIAMETER in. | LENGHT RF | LENGHT RTJ | STUD BOLTS NUMBER |
---|---|---|---|---|
1/2 | 1/2 | 55 | … | 4 |
3/4 | 1/2 | 65 | .. | 4 |
1 | 1/2 | 65 | 75 | 4 |
1.1/4 | 1/2 | 70 | 85 | 4 |
1.1/2 | 1/2 | 70 | 85 | 4 |
2 | 5/8 | 85 | 95 | 4 |
2.1/2 | 5/8 | 90 | 100 | 4 |
3 | 5/8 | 90 | 100 | 4 |
3.1/2 | 5/8 | 90 | 100 | 8 |
4 | 5/8 | 90 | 100 | 8 |
5 | 3/4 | 95 | 110 | 8 |
6 | 3/4 | 100 | 115 | 8 |
8 | 3/4 | 110 | 120 | 8 |
10 | 7/8 | 115 | 125 | 12 |
12 | 7/8 | 120 | 135 | 12 |
14 | 1 | 135 | 145 | 12 |
16 | 1 | 135 | 145 | 16 |
18 | 1.1/8 | 145 | 160 | 16 |
20 | 1.1/8 | 160 | 170 | 20 |
24 | 1.1/4 | 170 | 185 | 20 |
NPS | STUD BOLTS DIAMETER in. | RF | RTJ | STUD BOLTS NUMBER |
STUD DIA | Torque FT-LBS | ||
30% Initial Torque | 70% Torque | 100% Final Torque | |
1/2 | 12 | 29 | 41 |
9/16 | 18 | 41 | 59 |
5/8 | 24 | 57 | 82 |
3/4 | 43 | 101 | 145 |
7/8 | 70 | 163 | 233 |
1 | 105 | 245 | 350 |
1.1/8 | 154 | 359 | 513 |
1.1/4 | 217 | 505 | 722 |
1.3/8 | 294 | 685 | 979 |
1.1/2 | 388 | 905 | 1292 |
1.9/16 | 441 | 1030 | 1471 |
1.5/8 | 501 | 1169 | 1670 |
1.3/4 | 631 | 1471 | 2102 |
1.7/8 | 783 | 1827 | 2610 |
2 | 960 | 2240 | 3199 |
2.1/4 | 1388 | 3238 | 4626 |
2.1/2 | 1923 | 4487 | 6410 |
2.3/4 | 2341 | 5462 | 7802 |
3 | 3061 | 7143 | 10204 |
STUD DIA | Torque Nm | ||
30% Initial Torque | 70% Torque | 100% Final Torque | |
1/2 | 16 | 39 | 56 |
9/16 | 24 | 56 | 80 |
5/8 | 33 | 77 | 111 |
3/4 | 58 | 137 | 197 |
7/8 | 95 | 221 | 316 |
1 | 142 | 332 | 475 |
1.1/8 | 209 | 487 | 696 |
1.1/4 | 294 | 685 | 979 |
1.3/8 | 399 | 929 | 1327 |
1.1/2 | 526 | 1227 | 1752 |
1.9/16 | 598 | 1396 | 1994 |
1.5/8 | 679 | 1585 | 2264 |
1.3/4 | 856 | 1994 | 2850 |
1.7/8 | 1062 | 2477 | 3539 |
2 | 1302 | 3037 | 4337 |
2.1/4 | 1882 | 4390 | 6272 |
2.1/2 | 2607 | 6084 | 8691 |
2.3/4 | 3174 | 7405 | 10578 |
3 | 4150 | 9685 | 13835 |
NPS | STUD BOLTS DIAMETER in. | LENGHT RF | LENGHT RTJ | BOLTS NUMBER |
---|---|---|---|---|
1/2 | 1/2 | 65 | 75 | 4 |
3/4 | 5/8 | 75 | 90 | 4 |
1 | 5/8 | 75 | 90 | 4 |
1.1/4 | 5/8 | 85 | 95 | 4 |
1.1/2 | 3/4 | 90 | 100 | 4 |
2 | 5/8 | 90 | 100 | 8 |
2.1/2 | 3/4 | 100 | 115 | 8 |
3 | 3/4 | 110 | 120 | 8 |
3.1/2 | 3/4 | 110 | 125 | 8 |
4 | 3/4 | 115 | 125 | 8 |
5 | 3/4 | 120 | 135 | 8 |
6 | 3/4 | 120 | 140 | 12 |
8 | 7/8 | 140 | 150 | 12 |
10 | 1 | 160 | 170 | 16 |
12 | 1.1/8 | 170 | 185 | 16 |
14 | 1.1/8 | 180 | 190 | 20 |
16 | 1.1/4 | 190 | 205 | 20 |
18 | 1.1/4 | 195 | 210 | 24 |
20 | 1.1/4 | 205 | 220 | 24 |
24 | 1.1/2 | 230 | 255 | 24 |
NPS | STUD BOLTS DIAMETER in. | RF | RTJ | STUD BOLTS NUMBER |
ASTM A193 B7 Stud bolts dimensions for ASME B16.5 RF and RTJ flanges class 150 (in mm)
NPS | STUD BOLTS DIAMETER in. | LENGHT RF | LENGHT RTJ | BOLTS NUMBER |
---|---|---|---|---|
1/2 | 1/2 | 75 | 75 | 4 |
3/4 | 5/8 | 90 | 90 | 4 |
1 | 5/8 | 90 | 90 | 4 |
1.1/4 | 5/8 | 95 | 95 | 4 |
1.1/2 | 3/4 | 110 | 110 | 4 |
2 | 5/8 | 110 | 110 | 8 |
2.1/2 | 3/4 | 120 | 120 | 8 |
3 | 3/4 | 125 | 125 | 8 |
3.1/2 | 7/8 | 140 | 140 | 8 |
4 | 7/8 | 140 | 140 | 8 |
5 | 7/8 | 145 | 145 | 8 |
6 | 7/8 | 150 | 150 | 12 |
8 | 1 | 170 | 170 | 12 |
10 | 1.1/8 | 190 | 190 | 16 |
12 | 1.1/4 | 205 | 205 | 16 |
14 | 1.1/4 | 210 | 210 | 20 |
16 | 1.3/8 | 220 | 220 | 20 |
18 | 1.3/8 | 230 | 230 | 24 |
20 | 1.1/2 | 240 | 250 | 24 |
24 | 1.3/4 | 265 | 280 | 24 |
NPS | STUD BOLTS DIAMETER in. | RF | RTJ | STUD BOLTS NUMBER |
ASTM A193 B7 Stud bolts dimensions for ASME B16.5 RF and RTJ flanges class 150 (in mm)
NPS | STUD BOLTS DIAMETER in. | LENGHT RF | LENGHT RTJ | STUD BOLTS NUMBER |
---|---|---|---|---|
1/2 | 1/2 | 75 | 75 | 4 |
3/4 | 5/8 | 90 | 90 | 4 |
1 | 5/8 | 90 | 90 | 4 |
1.1/4 | 5/8 | 95 | 95 | 4 |
1.1/2 | 3/4 | 110 | 110 | 4 |
2 | 5/8 | 110 | 110 | 8 |
2.1/2 | 3/4 | 120 | 120 | 8 |
3 | 3/4 | 125 | 125 | 8 |
3.1/2 | 7/8 | 140 | 140 | 8 |
4 | 7/8 | 145 | 145 | 8 |
5 | 1 | 165 | 165 | 8 |
6 | 1 | 170 | 170 | 12 |
8 | 1.1/8 | 190 | 195 | 12 |
10 | 1.1/4 | 215 | 215 | 16 |
12 | 1.1/4 | 220 | 220 | 20 |
14 | 1.3/8 | 235 | 235 | 20 |
16 | 1.1/2 | 255 | 255 | 20 |
18 | 1.5/8 | 275 | 275 | 20 |
20 | 1.5/8 | 285 | 290 | 24 |
24 | 1.7/8 | 330 | 335 | 24 |
NPS | STUD BOLTS DIAMETER in. | RF | RTJ | STUD BOLTS NUMBER |
ASTM A193 B7 Stud bolts dimensions for ASME B16.5 RF and RTJ flanges class 150 (in mm)
NPS | STUD BOLTS DIAMETER in. | LENGHT RF | LENGHT RTJ | STUD BOLTS NUMBER |
---|---|---|---|---|
1/2 | 3/4 | 110 | 110 | 4 |
3/4 | 3/4 | 115 | 115 | 4 |
1 | 7/8 | 125 | 125 | 4 |
1.1/4 | 7/8 | 125 | 125 | 4 |
1.1/2 | 1 | 140 | 140 | 4 |
2 | 7/8 | 145 | 145 | 8 |
2.1/2 | 1 | 160 | 160 | 8 |
3 | 7/8 | 145 | 145 | 8 |
4 | 1.1/8 | 170 | 170 | 8 |
5 | 1.1/4 | 190 | 190 | 8 |
6 | 1.1/8 | 190 | 195 | 12 |
8 | 1.3/8 | 220 | 220 | 12 |
10 | 1.3/8 | 235 | 235 | 16 |
12 | 1.3/8 | 255 | 255 | 20 |
14 | 1.1/2 | 275 | 280 | 20 |
16 | 1.5/8 | 285 | 290 | 20 |
18 | 1.7/8 | 325 | 335 | 20 |
20 | 2 | 350 | 360 | 20 |
24 | 2.1/2 | 440 | 455 | 20 |
NPS | STUD BOLTS DIAMETER in. | RF | RTJ | STUD BOLTS NUMBER |
ASTM A193 B7 Stud bolts dimensions for ASME B16.5 RF and RTJ flanges class 150 (in mm)
NPS | STUD BOLTS DIAMETER in. | LENGHT RF | LENGHT RTJ | STUD BOLTS NUMBER |
---|---|---|---|---|
1/2 | 3/4 | 110 | 110 | 4 |
3/4 | 3/4 | 115 | 115 | 4 |
1 | 7/8 | 125 | 125 | 4 |
1.1/4 | 7/8 | 125 | 125 | 4 |
1.1/2 | 1 | 140 | 140 | 4 |
2 | 7/8 | 145 | 145 | 8 |
2.1/2 | 1 | 160 | 160 | 8 |
3 | 1.1/8 | 180 | 180 | 8 |
4 | 1.1/4 | 195 | 195 | 8 |
5 | 1.1/2 | 250 | 250 | 8 |
6 | 1.3/8 | 260 | 265 | 12 |
8 | 1.5/8 | 290 | 300 | 12 |
10 | 1.7/8 | 335 | 345 | 12 |
12 | 2 | 375 | 385 | 16 |
14 | 2.1/4 | 405 | 425 | 16 |
16 | 2.1/2 | 445 | 470 | 16 |
18 | 2.3/4 | 495 | 525 | 16 |
20 | 3 | 540 | 565 | 16 |
24 | 3.1/2 | 615 | 650 | 16 |
NPS | STUD BOLTS DIAMETER in. | RF | RTJ | STUD BOLTS NUMBER |
ASTM A193 B7 Stud bolts dimensions for ASME B16.5 RF and RTJ flanges class 150 (in mm)
NPS | STUD BOLTS DIAMETER in. | LENGHT RF | LENGHT RTJ | STUD BOLTS NUMBER |
---|---|---|---|---|
1/2 | 3/4 | 120 | 120 | 4 |
3/4 | 3/4 | 125 | 125 | 4 |
1 | 7/8 | 140 | 140 | 4 |
1.1/4 | 1 | 150 | 150 | 4 |
1.1/2 | 1.1/8 | 170 | 170 | 4 |
2 | 1 | 180 | 180 | 8 |
2.1/2 | 1.1/8 | 195 | 205 | 8 |
6 | 1.3/8 | 260 | 265 | 12 |
8 | 1.5/8 | 290 | 300 | 12 |
10 | 1.7/8 | 335 | 345 | 12 |
12 | 2 | 375 | 385 | 16 |
14 | 2.1/4 | 405 | 425 | 16 |
16 | 2.1/2 | 445 | 470 | 16 |
18 | 2.3/4 | 495 | 525 | 16 |
20 | 3 | 540 | 565 | 16 |
24 | 3.1/2 | 615 | 650 | 16 |
NPS | STUD BOLTS DIAMETER in. | RF | RTJ | STUD BOLTS NUMBER |
Bolt Diameter | D | F | C | H | |||||
Body Diameter | Width Across Flats | Width Across Corners | Height | ||||||
Max | Basic | Max | Min | Max | Min | Basic | Max | Min | |
1/2 | 0.515 | 7/8 | 0.875 | 0.850 | 1.010 | 0.969 | 11/32 | 0.364 | 0.302 |
5/8 | 0.642 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 27/64 | 0.444 | 0.378 |
3/4 | 0.768 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.383 | 1/2 | 0.524 | 0.455 |
7/8 | 0.895 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 37/64 | 0.604 | 0.531 |
1 | 1.022 | 1-5/8 | 1.625 | 1.575 | 1.876 | 1.796 | 43/64 | 0.700 | 0.591 |
1-1/8 | 1.149 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 3/4 | 0.780 | 0.658 |
1-1/4 | 1.277 | 2 | 2.00 | 1.938 | 2.309 | 2.209 | 27/32 | 0.876 | 0.749 |
1-3/8 | 1.404 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 29/32 | 0.940 | 0.810 |
1-1/2 | 1.531 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1 | 1.036 | 0.902 |
1-3/4 | 1.785 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-5/32 | 1.196 | 1.054 |
2 | 2.039 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-11/32 | 1.388 | 1.175 |
2-1/4 | 2.305 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 1-1/2 | 1.548 | 1.327 |
2-1/2 | 2.559 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 1-21/32 | 1.708 | 1.479 |
NATIONAL FINE (INCHES)
1/4 (28) | 9/16 (18) | 1-1/8 (12) |
5/16 (24) | 5/8 (18) | 1-1/4 (12) |
3/8 (24) | 3/4 (16) | 1-3/8 (12) |
7/16 (20) | 7/8 (14) | 1-1/2 (12) |
1/2 (20) | 1 (12, 14) | 2 (12) |
NATIONAL COARSE (INCHES)
1/4 (20) | 9/16 (12) | 1-1/8 (7) | 2 (4-1/2) |
5/16 (18) | 5/8 (11) | 1-1/4 (7) | 2-1/4 (4-1/2) |
3/8 (16) | 3/4 (10) | 1-3/8 (6) | 2-1/2 (4) |
7/16 (14) | 7/8 (9) | 1-1/2 (6) | |
1/2 (13) | 1 (8) | 1-3/4 (5) |
EIGHT PITCH SERIES (INCHES)
1 (8) | 1-1/2 (8) | 2 (8) |
1-1/8 (8) | 1-5/8 (8) | 2-1/8 (8) |
1-1/4 (8) | 1-3/4 (8) | |
1-3/8 (8) | 1-7/8 (8) |
ACME
Diameter (IN) | Thread Pitch | Alternate Pitch |
3/8 | 12 | – |
1/2 | 10 | – |
5/8 | 8 | 6 |
3/4 | 6 | 8 |
7/8 | 6 | – |
1 | 5 | 4, 6, 8 |
1-1/4 | 5 | 4 |
1-1/2 | 4 | 5 |