ASTM A182 F55 Flanges / Round Bar/ Bolts

ASME Sa182 F55 Super Duplex Round Bar And Rod Supplier In India.

Looking out for temper heated, quench, machine use properties in an alloy? Astm A182 Grade F55 Super Duplex Round Bar has just the right kind of alloy to suit your needs. Techniques like rolling and forging are used in molding this Asme Sa182 F55 Rod. To give them an even surface they are continuously rotated while forging. Thus the Astm A182 Gr F55 Hex Bar obtains the precision engineering from rolling technique whereas, forging provides it the required strength. Therefore, it is used in applications where flame hardening is used for surface hardness.

Astm A182 F55 Flanges display a low coefficient of thermal expansion and a high thermal conductivity along with excellent resistance to chloride stress-related corrosion. WHen Asme B16.5 Sa182 F55 Uns S32760 Material is exposed to environments such as acetic and acetic formic acid the exhibits outstanding resistance to general and acidic corrosion. This is due to higher levels of chromium and molybdenum which are added to A182 Gr F55 Blind Flange. They are used to terminate a tube, unlike other flanges that connect 2 different tubes.

These flanges can be used in inorganic acids as well. Though Astm A182 Grade F55 Super Duplex Flange can be diluted in Hydrochloric acid they should avoid being exposed to concentrated hydrochloric acid. Astm A182 Gr F55 Casting is used during welding for better connection. 

To connect the different flanges various fasteners are used. Astm A182 F55 Bolts are the ones that are made up of the same alloy grade. When infused with tungsten and copper the superalloy of Astm A182 Gr F55 Studs makes it resistant to an environment containing chloride. The weight of these Astm A182 Grade F55 Super Duplex Bolts is also light in weight as compared to grade 316 which makes it useful in applications that require lightweight screws. For applications that face fatigue and erosion corrosion, A182 Gr F55 Threaded Rod is considered to be ideal. We at Siddhagiri Metal manufacture these Asme Sa182 F55 Hex Bolts And Nut using high-quality raw material which helps to maintain the properties of this grade.

ASTM A182 F55 Flange

ASTM A182 GR F55 Hex Bolt

Super Duplex Steel F55 Round Bars

UNS S32760 F55 Slip On Flanges

Chemical Equation Of F55 Round Bars

C	Mn	Si	P	S	Ni	N	Fe	Cr	Mo
0.05 maximum	1.00 maximum	1.00 maximum	0.030 maximum	0.010 maximum	6.00 – 8.00	0.20 – 0.30	57.61 minimum	24.00 – 26.00	3.00 – 4.00

Astm A182 Gr F55 Hex Bolts Manufacturer, Ready Stock Of Astm F55 Studs And Threaded Rod.

A182 F55 Flange Maximum Pressure

Temperature °C	150#	300#	400#	600#	900#	1500#	2500#
-29~38	15.9	41.4	55.2	82.7	124.1	206.8	344.7
50	15.4	40.2	53.7	80.5	120.7	201.2	335.3
100	13.8	35.9	47.9	71.9	107.8	179.7	299.5
150	12.9	33.7	45.0	67.5	101.2	168.7	281.1
200	12.5	32.7	43.6	65.4	98.1	163.5	272.4
250	12.1	32.6	43.5	65.2	97.8	163.0	271.7
300	10.2	32.6	43.5	65.2	97.8	163.0	271.7
325	9.3	32.6	43.5	65.2	97.8	163.0	271.7
350	8.4	32.6	43.4	65.1	97.7	162.8	271.3
375	7.4	32.4	43.2	64.8	97.2	161.9	269.9
400	6.5	32.1	42.8	64.2	96.2	160.4	267.4
425	5.5	31.6	42.2	63.3	94.9	158.2	263.6
450	4.6	26.9	35.9	53.8	80.7	134.5	224.2
475	3.7	20.8	27.7	41.5	62.3	103.8	173.0

UNS S32760 F55 Blind Flange Stud Bolt Size Chart

	Class 150 Flanges				Class 300 Flanges				Class 600 Flanges
Nominal Size Of Pipe (NPS)	# Studs And Bolts	Bolt And Stud Diameter	Studs Length		# Bolt And Stud	Diameter of Bolt And Stud	Studs Length		# Bolt And Stud	Diameter of Bolt And Stud	Studs Length
			1/16 RF (Raised Face)	RTJ (Ring Type Joint)			1/16 RF (Raised Face)	RTJ (Ring Type Joint)			1/4 RF (Raised Face)	RTJ (Ring Type Joint)
1/2	4	0.50	2-1/4	–	4	0.50	2-1/2	3	4	0.50	3	3
3/4	4	0.50	2-1/2	–	4	0.63	3	3-1/2	4	0.63	3-1/2	3-1/2
1	4	0.50	2-1/2	3	4	0.63	3	3-1/2	4	0.63	3-1/2	3-1/2
1-1/4	4	0.50	2-3/4	3-1/4	4	0.63	3-1/4	3-3/4	4	0.63	3-3/4	3-3/4
1-1/2	4	0.50	2-3/4	3-1/4	4	0.75	3-1/2	4	4	0.75	4-1/4	4-1/4
2	4	0.63	3-1/4	3-3/4	8	0.63	3-1/2	4	8	0.63	4-1/4	4-1/4
2-1/2	4	0.63	3-1/2	4	8	0.75	4	4-1/2	8	0.75	4-3/4	4-3/4
3	4	0.63	3-1/2	4	8	0.75	4-1/4	4-3/4	8	0.75	5	5
3-1/2	8	0.63	3-1/2	4	8	0.75	4-1/4	5	8	0.88	5-1/2	5-1/2
4	8	0.63	3-1/2	4	8	0.75	4-1/2	5	8	0.88	5-3/4	5-3/4
5	8	0.75	3-3/4	4-1/4	8	0.75	4-3/4	5-1/4	8	1.00	6-1/2	6-1/2
6	8	0.75	4	4-1/2	12	0.75	4-3/4	5-1/2	12	1.00	6-3/4	6-3/4
8	8	0.75	4-1/4	4-3/4	12	0.88	5-1/2	6	12	1.13	7-1/2	7-3/4
10	12	0.88	4-1/2	5	16	1.00	6-1/4	6-3/4	16	1.25	8-1/2	8-1/2
12	12	0.88	4-3/4	5-1/4	16	1.13	6-3/4	7-1/4	20	1.25	8-3/4	8-3/4
14	12	1.00	5-1/4	5-3/4	20	1.13	7	7-1/2	20	1.38	9-1/4	9-1/4
16	16	1.00	5-1/4	5-3/4	20	1.25	7-1/2	8	20	1.50	10	10
18	16	1.13	5-3/4	6-1/4	24	1.25	7-3/4	8-1/4	20	1.63	10-3/4	10-3/4
20	20	1.13	6-1/4	6-3/4	24	1.25	8	8-3/4	24	1.63	11-1/4	11-1/2
24	20	1.25	6-3/4	7-1/4	24	1.50	9	10	24	1.88	13	13-1/4

Check Live Price Of Asme B16.5 Sa182 F55 Uns S32760 Blind Flange, Wide Stock Of Gr F55 Casting Ex Mumbai.

ASTM A182 Super Duplex F55 Flanges Thickness Tolerance

Wll Thickness Of ASTM A182 F55 Flanges
NPS	Outside Daimeter (O.D.)	Sch/ Schedule 10	Sch/ Schedule 20	Sch/ Schedule 30	STD Wall	Sch/ Schedule 40	Sch/ Schedule 60	EXT Hvy	Sch/ Schedule 80	Sch/ Schedule 100	Sch/ Schedule 120	Sch/ Schedule 140	Sch/ Schedule 160	XX Hvy
½	0.84	0.083			0.109	0.109		0.147	0.147				0.188	0.294
¾	1.05	0.083			0.113	0.113		0.154	0.154				0.219	0.308
1	1.315	0.109			0.133	0.133		0.179	0.179				0.25	0.358
1 ¼	1.66	0.109			0.14	0.14		0.191	0.191				0.25	0.382
1 ½	1.9	0.109			0.145	0.145		0.2	0.2				0.281	0.4
2	2.375	0.109			0.154	0.154		0.218	0.218				0.344	0.436
2 ½	2.875	0.12			0.203	0.203		0.276	0.276				0.375	0.552
3	3.5	0.12			0.216	0.216		0.3	0.3				0.438	0.6
3 ½	4	0.12			0.226	0.226		0.318	0.318					0.636
4	4.5	0.12			0.237	0.237		0.337	0.337		0.438		0.531	0.674
5	5.563	0.134			0.258	0.258		0.375	0.375		0.5		0.625	0.75
6	6.625	0.134			0.28	0.28		0.432	0.432		0.562		0.719	0.864
8	8.625	0.148	0.25	0.277	0.322	0.322	0.406	0.5	0.5	0.594	0.719	0.812	0.906	0.875
10	10.75	0.165	0.25	0.307	0.365	0.365	0.5	0.5	0.594	0.719	0.844	1	1.125	1
12	12.75	0.18	0.25	0.33	0.375	0.406	0.562	0.5	0.688	0.844	1	1.125	1.312	1
14	14	0.25	0.312	0.375	0.375	0.438	0.594	0.5	0.75	0.938	1.094	1.25	1.406
16	16	0.25	0.312	0.375	0.375	0.5	0.656	0.5	0.844	1.031	1.219	1.438	1.594
18	18	0.25	0.312	0.438	0.375	0.562	0.75	0.5	0.938	1.156	1.375	1.562	1.781
20	20	0.25	0.375	0.5	0.375	0.594	0.812	0.5	1.031	1.281	1.5	1.75	1.969
22	22	0.25			0.375			0.5
24	24	0.25	0.375	0.562	0.375	0.688	0.969	0.5	1.219	1.531	1.812	2.062	2.344

ASTM A182 F55 S32760 Slip On Flange Torque Specs

Size in Inches	Size in Millmeter	Max. Radial Projection of Imperfections that are
		Serrations, No Deeper Than the Bottom, Millmeter	Serrations, Deeper Than the Bottom, Millmeter
1/2	15	3.0	1.5
3/4	20	3.0	1.5
1	25	3.0	1.5
1 1/4	32	3.0	1.5
1 1/2	40	3.0	1.5
2	50	3.0	1.5
2 1/2	65	3.0	1.5
3	80	4.5	1.5
3 1/2	90	6.0	3.0
4	100	6.0	3.0
5	125	6.0	3.0
6	150	6.0	3.0
8	200	8.0	4.5
10	250	8.0	4.5
12	300	8.0	4.5
14	350	8.0	4.5
16	400	10.0	4.5
18	450	12.0	6.0
20	500	12.0	6.0
24	600	12.0	6.0

ASME SA182 F55 Super Duplex Weld Neck Flange Gasket Chart

Nominal Size Of Pipe (NPS)	Gasket (I.D.) Inside Diameter (Inches)	Gasket (O.D.) Outside Diameter
		150 LBS	300 LBS	400 LBS	600 LBS	900 LBS
1/2	0.84	1.875	2.125	2.125	2.125	2.50
3/4	1.06	2.25	2.625	2.625	2.625	2.75
1	1.31	2.625	2.875	2.875	2.875	3.125
1 1/4	1.66	3	3.25	3.25	3.25	3.50
1 1/2	1.91	3.375	3.75	3.75	3.75	3.875
2	2.38	4.125	4.375	4.375	4.375	5.625
2 1/2	2.88	4.875	5.125	5.125	5.125	6.50
3	3.50	5.375	5.875	5.875	5.875	6.625
4	4.50	6.875	7.125	7.00	7.625	8.125
5	5.56	7.75	8.50	8.375	9.50	9.75
6	6.62	8.75	9.875	9.75	10.50	11.375
8	8.62	11	12.125	12.00	12.625	14.125
10	10.75	13.375	14.25	14.125	15.75	17.125
12	12.75	16.125	16.625	16.50	18.00	19.625

Mechanical Properties Data Sheet Of Super Duplex F55 Hex Nuts

Melting Point (°C)	Melting Point (°F)	Density (g/cm 3)	Density (lb/in 3)
1350	2460	7.8	0.281

Why To Pay Extra When We Provide Asme Sa182 F55 Hex Bar And Flat Bar In Exact Sizes, Get Free Quote Now!.

UNS S32760 Material Specification

Material Specification	ASTM A182 F55 Flanges
Length Of:	NPS (1/4 Inch) To NPS (24 Inch)
Standard Of	Awwa C207/ DIN/ MSS/ ISO/ EN/ BS 10/ API/ PN
Facing Type	Flat Face (FF)/ Raised Face (RF)/ Ring Type Joint (RTJ)
Incoloy 800 Blind Flanges Used In Oil And Gas Industry	Pipeline Service And Join A Pipe With Other Equipment (Pump, Valve, Pipe And Tube) And (SORF/ WNRF/ SWRF/ BLRF)
Manufacturer Of Different Type ASME Standard	ASME B16.47/ ASME B16.5/ ASME B16.36/ ASME B16.48
Top 5 Common Type Of Flanges	Threaded/ Socket Weld/ Blind/ Lap Joint/ Slip-On/ Weld Neck Flanges
Maximum Pressure	150# To 2500#

Super Duplex Steel F55 Flanges Size Chart

Size in Inches	Size in Millimeter	Outer Diameter (O.D.)	Flange Thickness	Hub Outer Diameter	Length Of Pipe Flange	Diameter Of RF (Raised Face)	Height Of RF (Raised Face)	PCD	Socket Bore	Number of Bolt	Bolts Sizes UNC	Length Of Machine Bolts	Length Of Raised Face (RF) Studs	Size Of Bolt Hole	Size Of ISO Studs	Weight in kilogram
		A	B	C	D	E	F	G	H
1/2	15	90	9.6	30	14	34.9	2	60.3	22.2	4	1/2	50	55	5/8	M14	0.8
3/4	20	100	11.2	38	14	42.9	2	69.9	27.7	4	1/2	50	65	5/8	M14	0.9
1	25	110	12.7	49	16	50.8	2	79.4	34.5	4	1/2	55	65	5/8	M14	0.9
1 1/4	32	115	14.3	59	19	63.5	2	88.9	43.2	4	1/2	55	70	5/8	M14	1.4
1 1/2	40	125	15.9	65	21	73	2	98.4	49.5	4	1/2	65	70	5/8	M14	1.4
2	50	150	17.5	78	24	92.1	2	120.7	61.9	4	5/8	70	85	3/4	M16	2.3
2 1/2	65	180	20.7	90	27	104.8	2	139.7	74.6	4	5/8	75	90	3/4	M16	3.2
3	80	190	22.3	108	29	127	2	152.4	90.7	4	5/8	75	90	3/4	M16	3.7
3 1/2	90	215	22.3	122	30	139.7	2	177.8	103.4	8	5/8	75	90	3/4	M16	5
4	100	230	22.3	135	32	157.2	2	190.5	116.1	8	5/8	75	90	3/4	M16	5.9
5	125	255	22.3	164	35	185.7	2	215.9	143.8	8	3/4	85	95	7/8	M20	6.8
6	150	280	23.9	192	38	215.9	2	241.3	170.7	8	3/4	85	100	7/8	M20	8.6
8	200	345	27	246	43	269.9	2	298.5	221.5	8	3/4	90	110	7/8	M20	13.7
10	250	405	28.6	305	48	323.8	2	362	276.2	12	7/8	100	115	1	M24	19.5
12	300	485	30.2	365	54	381	2	431.8	327	12	7/8	100	120	1	M24	29
14	350	535	33.4	400	56	412.8	2	476.3	359.2	12	1	115	135	1 1/8	M27	41
16	400	595	35	457	62	469.9	2	539.8	410.5	16	1	115	135	1 1/8	M27	54
18	450	635	38.1	505	67	533.4	2	577.9	461.8	16	1 1/8	125	145	1 1/4	M30	59
20	500	700	41.3	559	71	584.2	2	635	513.1	20	1 1/8	140	160	1 1/4	M30	75
24	600	815	46.1	663	81	692.2	2	749.3	616	20	1 1/4	150	170	1 3/8	M33	100

Manufacturer & Supplier Of Astm A182 Grade F55 Super Duplex Bolts Material In India.

A182 Grade F55 Hex Bolts Size Chart

Normal Daimeter	PITCH In Millimeter	Diameter Millimeter	Diameter In Inches	Size Of Nut
Metric 10	1.5	10	0.3937	17
Metric 12	1.75	12	0.4724	19
Metric 14	2	14	0.5512	22
Metric 16	2	16	0.6299	24
Metric 18	2.5	18	0.7087	27
Metric 20	2.5	20	0.7874	30
Metric 22	2.5	22	0.8661	32
Metric 24	3	24	0.9449	36
Metric 27	3	27	1.063	41
Metric 30	3.5	30	1.1811	46
Metric 33	3.5	33	1.2992	50
Metric 36	4	36	1.4173	55
Metric 39	4	39	1.5354	60
Metric 42	4.5	42	1.6535	65
Metric 45	4.5	45	1.7717	70
Metric 48	5	48	1.8898	75
Metric 52	5	52	2.0472	80
Metric 56	5.5	56	2.2047	85
Metric 60	5.5	60	2.3622	90
Metric 64	6	64	2.5197	95
Metric 68	6	68	2.6772	100
Metric 72	6	72	2.8346	105
Metric 76	6	76	2.9921	110
Metric 80	6	80	3.1496	115
Metric 85	6	85	3.3464	120
Metric 90	6	90	3.5433	130
Metric 100	6	100	3.937	145
Metric 110	6	110	4.3307	155
Metric 125	6	125	4.9212	180
Metric 140	6	140	5.5118	200
Metric 160	6	160	6.2992	230

ASTM A182 F55 Flange Dimensions

Normal Pipe Size	Outer Daimeter of Flanges	Thickness of Flanges	Daimeter of (RF) Raised Face	Daimeter of Hub At Base	Lengtd Tdru Hub			Daimeter And Bore		Daimeter of Hub at Bevel	Fillet Radius	Socket Deptd
					Weld Neck (WN) Flanges	Slip On And Threaded/ Socket Weld Flanges	Lap Joint Flanges	Slip-on (SORF) And Socket Weld Flanges	Lap Joint (Loose) Flanges
	O	Q	R	X	Y	Y	Y	W	B	H	r	Z
1/2	3-1/2	7/16	1-3/8	1-3/16	1-7/8	5/8	5/8	.88	.90	.84	1/8	3/8
3/4	3-7/8	1/2	1-11/16	1-1/2	2-1/16	5/8	5/8	1.09	1.11	1.05	1/8	7/16
1	4-1/4	9/16	2	1-15/16	2-3/16	11/16	11/16	1.36	1.38	1.32	1/8	1/2
1-1/4	4-5/8	5/8	2-1/2	2-5/16	2-1/4	13/16	13/16	1.70	1.72	1.66	3/16	9/16
1-1/2	5	11/16	2-7/8	2-9/16	2-7/16	7/8	7/8	1.95	1.97	1.90	1/4	5/8
2	6	3/4	3-5/8	3-1/16	2-1/2	1	1	2.44	2.46	2.38	5/16	11/16
2-1/2	7	7/8	4-1/8	3-9/16	2-3/4	1-1/8	1-1/8	2.94	2.97	2.88	5/16	3/4
3	7-1/2	15/16	5	4-1/4	2-3/4	1-3/16	1-3/16	3.57	3.60	3.50	3/8	13/16
3-1/2	8-1/2	15/16	5-1/2	4-13/16	2-13/16	1-1/4	1-1/4	4.07	4.10	4.00	3/8	7/8
4	9	15/16	6-3/16	5-5/16	3	1-5/16	1-5/16	4.57	4.60	4.50	7/16	15/16
5	10	15/16	7.5/16	6-7/16	3-1/2	1-7/16	1-7/16	5.66	5.69	5.56	7/16	15/16
6	11	1	8-1/2	7-9/16	3-1/2	1-9/16	1-9/16	6.72	6.75	6.63	1/2	1-1/16
8	13-1/2	1-1/8	10-5/8	9-11/16	4	1-3/4	1-3/4	8.72	8.75	8.63	1/2	1-1/4
10	16	1-3/16	12-3/4	12	4	1-15/16	1-15/16	10.88	10.92	10.75	1/2	1-5/16
12	19	1-1/4	15	14-3/8	4-1/2	2-3/16	2-3/16	12.88	12.92	12.75	1/2	1-9/16
14	21	1-3/8	16-1/4	15-3/4	5	2-1/4	3-1/8	14.14	14.18	14.00	1/2	1-5/8
16	23-1/2	1-7/16	18-1/2	18	5	2-1/2	3-7/16	16.16	16.19	16.00	1/2	1-3/4
18	25	1-9/16	21	19-7/8	5-1/2	2-11/16	3-13/16	18.18	18.20	18.00	1/2	1-15/16
20	27-1/2	1-11/16	23	22	5-11/16	2-7/8	4-1/16	20.20	20.25	20.00	1/2	2-1/8
24	32	1-7/8	27-1/4	26-1/8	6	3-1/4	4-3/8	24.25	24.25	24.00	1/2	2-1/2

A182 F55 Super Duplex Steel Round Bars Dimensions

Size Of Metric		Standard US Bar		ASTM/ Canadian Standard		Japanese Standard
Size Of Bar	Diameter In (Millimeter)	Size Of Bar	Diameter In (Inches)	Size Of Bar	Diameter In (Millimeter2)	Size Of Bar	Diameter In (Millimeter)
5	5	#2	0.250	10M	100	6	6
5.5	5.5	#3	0.375	15M	200	10	10
6	6	#4	0.500	20M	300	13	13
7	7	#5	0.625	25M	500	16	16
8	8	#6	0.750	30M	700	19	19
9	9	#7	0.875	35M	1000	22	22
10	10	#8	1.000	45M	1500	25	25
11	11	#9	1.125	55M	2500	29	29
12	12	#10	1.250			32	32
14	14	#11	1.375			35	35
16	16	#12	1.500			38	38
18	18	#13	1.625			41	41
20	20	#14	1.750			44	44
22	22	#15	1.875			48	48
25	25	#16	2.000			51	51
28	28	#18	2.250			57	57
32	32
36	36
40	40
44	44
50	50

Dimensions Of Super Duplex GR F55 Fasteners

Nominal Size Of (D)	Diameter Of Body		Thickness Of Head		Flats Across		Bolts Corners Across
	D (MAXIMUM)	D (MINIMUM)	H (MAXIMUM)	H (MINIMUM)	F (MAXIMUM)	F (MINIMUM)	C (MAXIMUM)	C (MINIMUM)
m10	10.00	9.78	6.63	6.17	17.00	15.73	18.48	17.77
m12	12.00	11.73	7.76	4.24	19.00	17.73	20.78	20.03
m14	14.00	13.73	9.09	8.51	22.00	20.67	24.25	23.35
m16	16.00	15.73	10.32	9.68	24.00	23.67	27.71	26.75
m20	20.00	19.67	12.88	12.12	30.00	29.16	34.64	32.95
m24	24.00	23.67	15.44	14.56	36.00	35.00	41.57	39.55
m30	30.00	29.67	19.48	17.92	46.00	45.00	53.12	50.85
m36	36.00	35.61	23.38	21.63	55.00	53.80	63.51	60.79
m42	42.00	41.38	26.97	25.03	65.00	62.90	75.06	71.71
m48	48.00	47.38	31.07	28.93	75.00	72.60	86.60	82.76
m56	56.00	55.26	36.2	33.80	85.00	82.20	98.15	93.71
m64	64.00	63.26	41.32	38.68	95.00	91.80	109.70	104.65
m72	72.00	71.26	46.45	43.55	105.00	101.40	121.24	115.60
m80	80.00	79.26	51.58	48.42	115.00	111.00	132.72	126.54
m90	90.00	89.13	57.74	54.26	130.00	125.50	150.11	143.07
m100	90.00	99.13	63.9	60.10	145.00	140.00	167.43	159.60

Grade F55 Super Duplex Flange Weight Chart

Normal Pipe Sizes		Dimensions Of Flanges		Weight In Kilogram
Normal Pipe Size (Inch)	DN (Millimeter)	Flanges Millimeter	Flanges Thickness	Slip-on Socket Weld (KG)	Weld Neck (KG)	Blind (KG)
1/2	15	88.9	11.2	0.4	0.5	0.4
3/4	20	98.6	12.7	0.6	0.7	0.6
1	25	108	14.2	0.8	1	0.9
1 1/4	32	117.3	15.7	1	1.3	1.2
1 1/2	40	127	17.5	1.3	1.7	1.5
2	50	152.4	19.1	2.1	2.6	2.4
2 1/2	65	177.8	22.4	3.3	4.1	3.9
3	80	190.5	23.9	3.9	4.9	4.9
3 1/2	90	215.9	23.9	4.8	6.1	6.2
4	100	228.6	23.9	5.3	6.8	7.0
5	125	254	23.9	6.1	8.6	8.6
6	150	279.4	25.4	7.5	10.6	11.3
8	200	342.9	28.4	12.1	17.6	19.6
10	250	406.4	30.2	16.5	24	28.6
12	300	482.6	31.8	26.2	36.5	43.2
14	350	533.4	35.1	34.6	48.4	58.1
16	400	596.9	36.6	44.8	60.6	76.1
18	450	635	39.6	48.9	68.3	93.7
20	500	698.5	42.9	61.9	84.5	122.0
24	600	812.8	47.8	86.9	115	185.0

Super Duplex F55 Bolts Weight Chart

Diameter Of Bolts	Metric 12	Metric 16	Metric 20	Metric 22	Metric 24	Metric 27	Metric 30	Metric 36
Length
30	49.1
35	53.6
40	58.0	105
45	62.1	113	188
50	66.6	121	200	257
55	71.0	129	212	272
60	75.4	137	225	286	362
65	79.9	145	237	301	380
70	84.3	153	249	316	398	532
75	88.8	160	262	331	415	554	701
80	93.2	168	274	346	433	576	728
85	97.6	176	286	361	451	599	756	1184
90	102	184	298	375	467	621	784	1224
95	107	192	310	390	485	644	812	1264
100		199	322	405	503	665	838	1304
105		207	335	420	520	688	865	1336
110		215	347	435	538	710	893	1376
115		223	359	450	556	732	921	1415
120		231	372	465	574	755	949	1455
125		239	384	479	591	777	976	1495
130		247	396	494	609	800	1004	1535
135			409	509	627	822	1032	1575
140			421	524	645	845	1059	1615
145			433	539	662	867	1087	1655
150			446	554	680	890	1115	1695
155			458	569	698	912	1143	1735
160				584	716	935	1170	1775
165				599	733	957	1198	1815
170					751	979	1226	1855
175					769	1002	1254	1895
180					787	1024	1281	1935
185					804	1047	1309	1974
190					822	1069	1337	2014
195					840	1092	1365	2054
200						1114	1392	2094

Buy ASTM A182 F55 Flanges / Round Bar/ Bolts For Fastest Delivery To Our Customers

ASTM A182 F55 Weld Neck Flange

A182 Gr F55 Super Duplex Steel Blind Flanges

ASME Sa 182 F55 Slip On Flange

UNS S32205 Super Duplex Socket Weld Flange

S32205 Super Duplex Bolts

ASTM A182 GR.F55 Fasteners

UNS S32760 Hex Bolts

F55 Super Duplex Stainless Steel Nuts

ASTM A182 F55 UNS S32760 Round Bars

ASTM A182 F55 Round Bar

F55 Super Duplex Stainless Steel Round Bar

UNS S32760 Round Bar

Our Materials Are Delivered To The Following Countries:

Canada, Japan, Saudi Arabia (KSA), Italy	ASME Sa 182 F55 Slip On Flange
Spain, Malaysia, Germany, Australia	UNS S32760 Hex Bolts
ASTM A182 GR.F55 Fasteners	Super Duplex SS Flanges
Europe, Singapore, USA, Malaysia	ASTM A182 F55 Weld Neck Flange
Malaysia, Colombia, South Africa, Turkey	A182 Gr F55 Super Duplex Steel Blind Flanges
Poland, Romania, Kuwait, Singapore	S32760 Super Duplex Hex Bolts
Philippines, Malaysia, Philippines, Netherlands	F55 Super Duplex Stainless Steel Nuts
Singapore, Canada, Malaysia, Iran	F55 Super Duplex Stainless Steel Round Bar
UK, Philippines, Bahrain, United Arab Emirates (UAE)	ASTM A182 F55 Round Bar
United Kingdom -UK, China, South Africa, Chile	ASTM A182 F55 UNS S32760 Round Bars
Malaysia, South Korea, Bangladesh, UK	UNS S32760 Super Duplex Socket Weld Flange
Mexico, Taiwan, Thailand, Malaysia	UNS S32760 Round Bar