There is a variety of stainless steel pipes, flanges, and fasteners available in the market. Astm A182 Gr F53 Rod is one amongst those. They have a dual microstructure of austenitic and ferrite. These Astm A182 F53 Super Duplex Round Bar have a lower coefficient of thermal expansion and a higher thermal conductivity as compared to other austenitic steels. Apart from this Sa 182 F53 Hex Bar also provides outstanding resistance to chloride pitting and chloride stress related corrosion cracking along with resistance to crevice corrosion. This is due to the high molybdenum, chromium. These Astm F53 Flat Bar can not be hardened using heat treatment. Cold working operations are required to harden them. Though gas weld does not apply to these Astm F53 Threaded Rod they can be easily welded using resistance and arc welding operations.
To connect the tubes and bars made out of this Grade Astm A182 F53 Flanges are usually considered. Their high impact strength even at sub-zero temperature displays high resistance. Astm A182 Grade F53 Super Duplex Stainless Steel Pipe Flange is supplied in the solution annealed hot working condition. The mechanical strength, low-temperature toughness, and corrosion resistance offered by these Flanges are higher than that of ordinary duplex stainless steel flanges. Astm A182 Gr F53 Uns S32750 Blind Flange is usually used to close an open end instead of connecting 2 ends.
Astm A182 F53 Super Duplex Steel Bolts are used to connect these flanges which in turn connect pipes and tubes. They can resist chloride ions. Sa 182 F53 Stud Bolts are used in pulp and paper industries that use chlorine containing bleaches. It contains hypochlorite which leaves a residue on the steel. This residue increases if Astm A182 Gr F53 Hex Bolt and pipes are not cleaned properly from time to time.
Standard Specification | ASTM A182 F53 Flange |
---|---|
Temperature Ratings | 150 LBS To 2500 LBS |
Flanges Types And Uses | Pipeline Service And Join A Pipe With Other Equipment (Pump, Valve, Pipe And Tube) And (SORF/ WNRF/ SWRF/ BLRF) |
Standard Flange Chart | DIN/ MSS/ API/ Awwa C207/ PN/ ISO/ EN/ BS 10 |
Length Size: | NPS (1/4) To NPS (24) |
Standard Of ASME | ASME B16.47, ASME B16.36, ASME B16.48, ASME B16.5 |
Manufacturer Of Most Selling Type | Socket Weld/ Lap Joint/ Slip-On/ Weld Neck/ Blind/ Threaded Flanges |
Top 3 Facing Type Of Flange | Raised Face/ Ring Type Joint & Flat Face/ |
Normal Pipe Size | Outer Diameter of Flanges | Thickness of Flanges | Diameter of (RF) Raised Face | Diameter of Hub At Base | Lengtd Tdru Hub | Diameter And Bore | Diameter of Hub at Bevel | Fillet Radius | Socket Deptd | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Weld Neck (WN) Flanges | Slip On And Threaded/ Socket Weld Flanges | Lap Joint Flanges | Slip-on (SORF) And Socket Weld Flanges | Lap Joint (Loose) Flanges | ||||||||
O | Q | R | X | Y | Y | Y | W | B | H | r | Z | |
1/2 | 3-1/2 | 7/16 | 1-3/8 | 1-3/16 | 1-7/8 | 5/8 | 5/8 | .88 | .90 | .84 | 1/8 | 3/8 |
3/4 | 3-7/8 | 1/2 | 1-11/16 | 1-1/2 | 2-1/16 | 5/8 | 5/8 | 1.09 | 1.11 | 1.05 | 1/8 | 7/16 |
1 | 4-1/4 | 9/16 | 2 | 1-15/16 | 2-3/16 | 11/16 | 11/16 | 1.36 | 1.38 | 1.32 | 1/8 | 1/2 |
1-1/4 | 4-5/8 | 5/8 | 2-1/2 | 2-5/16 | 2-1/4 | 13/16 | 13/16 | 1.70 | 1.72 | 1.66 | 3/16 | 9/16 |
1-1/2 | 5 | 11/16 | 2-7/8 | 2-9/16 | 2-7/16 | 7/8 | 7/8 | 1.95 | 1.97 | 1.90 | 1/4 | 5/8 |
2 | 6 | 3/4 | 3-5/8 | 3-1/16 | 2-1/2 | 1 | 1 | 2.44 | 2.46 | 2.38 | 5/16 | 11/16 |
2-1/2 | 7 | 7/8 | 4-1/8 | 3-9/16 | 2-3/4 | 1-1/8 | 1-1/8 | 2.94 | 2.97 | 2.88 | 5/16 | 3/4 |
3 | 7-1/2 | 15/16 | 5 | 4-1/4 | 2-3/4 | 1-3/16 | 1-3/16 | 3.57 | 3.60 | 3.50 | 3/8 | 13/16 |
3-1/2 | 8-1/2 | 15/16 | 5-1/2 | 4-13/16 | 2-13/16 | 1-1/4 | 1-1/4 | 4.07 | 4.10 | 4.00 | 3/8 | 7/8 |
4 | 9 | 15/16 | 6-3/16 | 5-5/16 | 3 | 1-5/16 | 1-5/16 | 4.57 | 4.60 | 4.50 | 7/16 | 15/16 |
5 | 10 | 15/16 | 7.5/16 | 6-7/16 | 3-1/2 | 1-7/16 | 1-7/16 | 5.66 | 5.69 | 5.56 | 7/16 | 15/16 |
6 | 11 | 1 | 8-1/2 | 7-9/16 | 3-1/2 | 1-9/16 | 1-9/16 | 6.72 | 6.75 | 6.63 | 1/2 | 1-1/16 |
8 | 13-1/2 | 1-1/8 | 10-5/8 | 9-11/16 | 4 | 1-3/4 | 1-3/4 | 8.72 | 8.75 | 8.63 | 1/2 | 1-1/4 |
10 | 16 | 1-3/16 | 12-3/4 | 12 | 4 | 1-15/16 | 1-15/16 | 10.88 | 10.92 | 10.75 | 1/2 | 1-5/16 |
12 | 19 | 1-1/4 | 15 | 14-3/8 | 4-1/2 | 2-3/16 | 2-3/16 | 12.88 | 12.92 | 12.75 | 1/2 | 1-9/16 |
14 | 21 | 1-3/8 | 16-1/4 | 15-3/4 | 5 | 2-1/4 | 3-1/8 | 14.14 | 14.18 | 14.00 | 1/2 | 1-5/8 |
16 | 23-1/2 | 1-7/16 | 18-1/2 | 18 | 5 | 2-1/2 | 3-7/16 | 16.16 | 16.19 | 16.00 | 1/2 | 1-3/4 |
18 | 25 | 1-9/16 | 21 | 19-7/8 | 5-1/2 | 2-11/16 | 3-13/16 | 18.18 | 18.20 | 18.00 | 1/2 | 1-15/16 |
20 | 27-1/2 | 1-11/16 | 23 | 22 | 5-11/16 | 2-7/8 | 4-1/16 | 20.20 | 20.25 | 20.00 | 1/2 | 2-1/8 |
24 | 32 | 1-7/8 | 27-1/4 | 26-1/8 | 6 | 3-1/4 | 4-3/8 | 24.25 | 24.25 | 24.00 | 1/2 | 2-1/2 |
Size Of Metric | Standard US Bar | ASTM/ Canadian Standard | Japanese Standard | ||||
---|---|---|---|---|---|---|---|
Size Of Bar | Diameter In (Millimeter) | Size Of Bar | Diameter In (Inches) | Size Of Bar | Diameter In (Millimeter2) | Size Of Bar | Diameter In (Millimeter) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 | 32 | 32 | ||
14 | 14 | #11 | 1.375 | 35 | 35 | ||
16 | 16 | #12 | 1.500 | 38 | 38 | ||
18 | 18 | #13 | 1.625 | 41 | 41 | ||
20 | 20 | #14 | 1.750 | 44 | 44 | ||
22 | 22 | #15 | 1.875 | 48 | 48 | ||
25 | 25 | #16 | 2.000 | 51 | 51 | ||
28 | 28 | #18 | 2.250 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Nominal Size Of (D) |
Diameter Of Body |
Thickness Of Head |
Flats Across |
Bolts Corners Across |
||||
---|---|---|---|---|---|---|---|---|
D (MAXIMUM) |
D (MINIMUM) |
H (MAXIMUM) |
H (MINIMUM) |
F (MAXIMUM) |
F (MINIMUM) |
C (MAXIMUM) |
C (MINIMUM) |
|
m10 |
10.00 |
9.78 |
6.63 |
6.17 |
17.00 |
15.73 |
18.48 |
17.77 |
m12 |
12.00 |
11.73 |
7.76 |
4.24 |
19.00 |
17.73 |
20.78 |
20.03 |
m14 |
14.00 |
13.73 |
9.09 |
8.51 |
22.00 |
20.67 |
24.25 |
23.35 |
m16 |
16.00 |
15.73 |
10.32 |
9.68 |
24.00 |
23.67 |
27.71 |
26.75 |
m20 |
20.00 |
19.67 |
12.88 |
12.12 |
30.00 |
29.16 |
34.64 |
32.95 |
m24 |
24.00 |
23.67 |
15.44 |
14.56 |
36.00 |
35.00 |
41.57 |
39.55 |
m30 |
30.00 |
29.67 |
19.48 |
17.92 |
46.00 |
45.00 |
53.12 |
50.85 |
m36 |
36.00 |
35.61 |
23.38 |
21.63 |
55.00 |
53.80 |
63.51 |
60.79 |
m42 |
42.00 |
41.38 |
26.97 |
25.03 |
65.00 |
62.90 |
75.06 |
71.71 |
m48 |
48.00 |
47.38 |
31.07 |
28.93 |
75.00 |
72.60 |
86.60 |
82.76 |
m56 |
56.00 |
55.26 |
36.2 |
33.80 |
85.00 |
82.20 |
98.15 |
93.71 |
m64 |
64.00 |
63.26 |
41.32 |
38.68 |
95.00 |
91.80 |
109.70 |
104.65 |
m72 |
72.00 |
71.26 |
46.45 |
43.55 |
105.00 |
101.40 |
121.24 |
115.60 |
m80 |
80.00 |
79.26 |
51.58 |
48.42 |
115.00 |
111.00 |
132.72 |
126.54 |
m90 |
90.00 |
89.13 |
57.74 |
54.26 |
130.00 |
125.50 |
150.11 |
143.07 |
m100 |
90.00 |
99.13 |
63.9 |
60.10 |
145.00 |
140.00 |
167.43 |
159.60 |
Normal Pipe Sizes | Dimensions Of Flanges | Weight In Kilogram | ||||
---|---|---|---|---|---|---|
Normal Pipe Size (Inch) |
DN (Millimeter) | Flanges Millimeter |
Flanges Thickness |
Slip-on Socket Weld (KG) |
Weld Neck (KG) | Blind (KG) |
1/2 | 15 | 88.9 | 11.2 | 0.4 | 0.5 | 0.4 |
3/4 | 20 | 98.6 | 12.7 | 0.6 | 0.7 | 0.6 |
1 | 25 | 108 | 14.2 | 0.8 | 1 | 0.9 |
1 1/4 | 32 | 117.3 | 15.7 | 1 | 1.3 | 1.2 |
1 1/2 | 40 | 127 | 17.5 | 1.3 | 1.7 | 1.5 |
2 | 50 | 152.4 | 19.1 | 2.1 | 2.6 | 2.4 |
2 1/2 | 65 | 177.8 | 22.4 | 3.3 | 4.1 | 3.9 |
3 | 80 | 190.5 | 23.9 | 3.9 | 4.9 | 4.9 |
3 1/2 | 90 | 215.9 | 23.9 | 4.8 | 6.1 | 6.2 |
4 | 100 | 228.6 | 23.9 | 5.3 | 6.8 | 7.0 |
5 | 125 | 254 | 23.9 | 6.1 | 8.6 | 8.6 |
6 | 150 | 279.4 | 25.4 | 7.5 | 10.6 | 11.3 |
8 | 200 | 342.9 | 28.4 | 12.1 | 17.6 | 19.6 |
10 | 250 | 406.4 | 30.2 | 16.5 | 24 | 28.6 |
12 | 300 | 482.6 | 31.8 | 26.2 | 36.5 | 43.2 |
14 | 350 | 533.4 | 35.1 | 34.6 | 48.4 | 58.1 |
16 | 400 | 596.9 | 36.6 | 44.8 | 60.6 | 76.1 |
18 | 450 | 635 | 39.6 | 48.9 | 68.3 | 93.7 |
20 | 500 | 698.5 | 42.9 | 61.9 | 84.5 | 122.0 |
24 | 600 | 812.8 | 47.8 | 86.9 | 115 | 185.0 |
Diameter Of Bolts | Metric 12 | Metric 16 | Metric 20 | Metric 22 | Metric 24 | Metric 27 | Metric 30 | Metric 36 |
---|---|---|---|---|---|---|---|---|
Length | ||||||||
30 | 49.1 | |||||||
35 | 53.6 | |||||||
40 | 58.0 | 105 | ||||||
45 | 62.1 | 113 | 188 | |||||
50 | 66.6 | 121 | 200 | 257 | ||||
55 | 71.0 | 129 | 212 | 272 | ||||
60 | 75.4 | 137 | 225 | 286 | 362 | |||
65 | 79.9 | 145 | 237 | 301 | 380 | |||
70 | 84.3 | 153 | 249 | 316 | 398 | 532 | ||
75 | 88.8 | 160 | 262 | 331 | 415 | 554 | 701 | |
80 | 93.2 | 168 | 274 | 346 | 433 | 576 | 728 | |
85 | 97.6 | 176 | 286 | 361 | 451 | 599 | 756 | 1184 |
90 | 102 | 184 | 298 | 375 | 467 | 621 | 784 | 1224 |
95 | 107 | 192 | 310 | 390 | 485 | 644 | 812 | 1264 |
100 | 199 | 322 | 405 | 503 | 665 | 838 | 1304 | |
105 | 207 | 335 | 420 | 520 | 688 | 865 | 1336 | |
110 | 215 | 347 | 435 | 538 | 710 | 893 | 1376 | |
115 | 223 | 359 | 450 | 556 | 732 | 921 | 1415 | |
120 | 231 | 372 | 465 | 574 | 755 | 949 | 1455 | |
125 | 239 | 384 | 479 | 591 | 777 | 976 | 1495 | |
130 | 247 | 396 | 494 | 609 | 800 | 1004 | 1535 | |
135 | 409 | 509 | 627 | 822 | 1032 | 1575 | ||
140 | 421 | 524 | 645 | 845 | 1059 | 1615 | ||
145 | 433 | 539 | 662 | 867 | 1087 | 1655 | ||
150 | 446 | 554 | 680 | 890 | 1115 | 1695 | ||
155 | 458 | 569 | 698 | 912 | 1143 | 1735 | ||
160 | 584 | 716 | 935 | 1170 | 1775 | |||
165 | 599 | 733 | 957 | 1198 | 1815 | |||
170 | 751 | 979 | 1226 | 1855 | ||||
175 | 769 | 1002 | 1254 | 1895 | ||||
180 | 787 | 1024 | 1281 | 1935 | ||||
185 | 804 | 1047 | 1309 | 1974 | ||||
190 | 822 | 1069 | 1337 | 2014 | ||||
195 | 840 | 1092 | 1365 | 2054 | ||||
200 | 1114 | 1392 | 2094 |
Size in Inches | Size in Millimeter | Outer Diameter (O.D.) | Flange Thickness | Hub Outer Diameter | Length Of Pipe Flange | Diameter Of RF (Raised Face) | Height Of RF (Raised Face) | PCD | Socket Bore | Number of Bolt | Bolts Sizes UNC | Length Of Machine Bolts | Length Of Raised Face (RF) Studs | Size Of Bolt Hole | Size Of ISO Studs | Weight in kilogram |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | B | C | D | E | F | G | H | |||||||||
1/2 | 15 | 90 | 9.6 | 30 | 14 | 34.9 | 2 | 60.3 | 22.2 | 4 | 1/2 | 50 | 55 | 5/8 | M14 | 0.8 |
3/4 | 20 | 100 | 11.2 | 38 | 14 | 42.9 | 2 | 69.9 | 27.7 | 4 | 1/2 | 50 | 65 | 5/8 | M14 | 0.9 |
1 | 25 | 110 | 12.7 | 49 | 16 | 50.8 | 2 | 79.4 | 34.5 | 4 | 1/2 | 55 | 65 | 5/8 | M14 | 0.9 |
1 1/4 | 32 | 115 | 14.3 | 59 | 19 | 63.5 | 2 | 88.9 | 43.2 | 4 | 1/2 | 55 | 70 | 5/8 | M14 | 1.4 |
1 1/2 | 40 | 125 | 15.9 | 65 | 21 | 73 | 2 | 98.4 | 49.5 | 4 | 1/2 | 65 | 70 | 5/8 | M14 | 1.4 |
2 | 50 | 150 | 17.5 | 78 | 24 | 92.1 | 2 | 120.7 | 61.9 | 4 | 5/8 | 70 | 85 | 3/4 | M16 | 2.3 |
2 1/2 | 65 | 180 | 20.7 | 90 | 27 | 104.8 | 2 | 139.7 | 74.6 | 4 | 5/8 | 75 | 90 | 3/4 | M16 | 3.2 |
3 | 80 | 190 | 22.3 | 108 | 29 | 127 | 2 | 152.4 | 90.7 | 4 | 5/8 | 75 | 90 | 3/4 | M16 | 3.7 |
3 1/2 | 90 | 215 | 22.3 | 122 | 30 | 139.7 | 2 | 177.8 | 103.4 | 8 | 5/8 | 75 | 90 | 3/4 | M16 | 5 |
4 | 100 | 230 | 22.3 | 135 | 32 | 157.2 | 2 | 190.5 | 116.1 | 8 | 5/8 | 75 | 90 | 3/4 | M16 | 5.9 |
5 | 125 | 255 | 22.3 | 164 | 35 | 185.7 | 2 | 215.9 | 143.8 | 8 | 3/4 | 85 | 95 | 7/8 | M20 | 6.8 |
6 | 150 | 280 | 23.9 | 192 | 38 | 215.9 | 2 | 241.3 | 170.7 | 8 | 3/4 | 85 | 100 | 7/8 | M20 | 8.6 |
8 | 200 | 345 | 27 | 246 | 43 | 269.9 | 2 | 298.5 | 221.5 | 8 | 3/4 | 90 | 110 | 7/8 | M20 | 13.7 |
10 | 250 | 405 | 28.6 | 305 | 48 | 323.8 | 2 | 362 | 276.2 | 12 | 7/8 | 100 | 115 | 1 | M24 | 19.5 |
12 | 300 | 485 | 30.2 | 365 | 54 | 381 | 2 | 431.8 | 327 | 12 | 7/8 | 100 | 120 | 1 | M24 | 29 |
14 | 350 | 535 | 33.4 | 400 | 56 | 412.8 | 2 | 476.3 | 359.2 | 12 | 1 | 115 | 135 | 1 1/8 | M27 | 41 |
16 | 400 | 595 | 35 | 457 | 62 | 469.9 | 2 | 539.8 | 410.5 | 16 | 1 | 115 | 135 | 1 1/8 | M27 | 54 |
18 | 450 | 635 | 38.1 | 505 | 67 | 533.4 | 2 | 577.9 | 461.8 | 16 | 1 1/8 | 125 | 145 | 1 1/4 | M30 | 59 |
20 | 500 | 700 | 41.3 | 559 | 71 | 584.2 | 2 | 635 | 513.1 | 20 | 1 1/8 | 140 | 160 | 1 1/4 | M30 | 75 |
24 | 600 | 815 | 46.1 | 663 | 81 | 692.2 | 2 | 749.3 | 616 | 20 | 1 1/4 | 150 | 170 | 1 3/8 | M33 | 100 |
Normal Diameter | PITCH In Millimeter | Diameter Millimeter | Diameter In Inches | Size Of Nut |
---|---|---|---|---|
Metric 10 | 1.5 | 10 | 0.3937 | 17 |
Metric 12 | 1.75 | 12 | 0.4724 | 19 |
Metric 14 | 2 | 14 | 0.5512 | 22 |
Metric 16 | 2 | 16 | 0.6299 | 24 |
Metric 18 | 2.5 | 18 | 0.7087 | 27 |
Metric 20 | 2.5 | 20 | 0.7874 | 30 |
Metric 22 | 2.5 | 22 | 0.8661 | 32 |
Metric 24 | 3 | 24 | 0.9449 | 36 |
Metric 27 | 3 | 27 | 1.063 | 41 |
Metric 30 | 3.5 | 30 | 1.1811 | 46 |
Metric 33 | 3.5 | 33 | 1.2992 | 50 |
Metric 36 | 4 | 36 | 1.4173 | 55 |
Metric 39 | 4 | 39 | 1.5354 | 60 |
Metric 42 | 4.5 | 42 | 1.6535 | 65 |
Metric 45 | 4.5 | 45 | 1.7717 | 70 |
Metric 48 | 5 | 48 | 1.8898 | 75 |
Metric 52 | 5 | 52 | 2.0472 | 80 |
Metric 56 | 5.5 | 56 | 2.2047 | 85 |
Metric 60 | 5.5 | 60 | 2.3622 | 90 |
Metric 64 | 6 | 64 | 2.5197 | 95 |
Metric 68 | 6 | 68 | 2.6772 | 100 |
Metric 72 | 6 | 72 | 2.8346 | 105 |
Metric 76 | 6 | 76 | 2.9921 | 110 |
Metric 80 | 6 | 80 | 3.1496 | 115 |
Metric 85 | 6 | 85 | 3.3464 | 120 |
Metric 90 | 6 | 90 | 3.5433 | 130 |
Metric 100 | 6 | 100 | 3.937 | 145 |
Metric 110 | 6 | 110 | 4.3307 | 155 |
Metric 125 | 6 | 125 | 4.9212 | 180 |
Metric 140 | 6 | 140 | 5.5118 | 200 |
Metric 160 | 6 | 160 | 6.2992 | 230 |
Temperature °C | 150# | 300# | 400# | 600# | 900# | 1500# | 2500# |
---|---|---|---|---|---|---|---|
-29~38 | 15.9 | 41.4 | 55.2 | 82.7 | 124.1 | 206.8 | 344.7 |
50 | 15.4 | 40.2 | 53.7 | 80.5 | 120.7 | 201.2 | 335.3 |
100 | 13.8 | 35.9 | 47.9 | 71.9 | 107.8 | 179.7 | 299.5 |
150 | 12.9 | 33.7 | 45.0 | 67.5 | 101.2 | 168.7 | 281.1 |
200 | 12.5 | 32.7 | 43.6 | 65.4 | 98.1 | 163.5 | 272.4 |
250 | 12.1 | 32.6 | 43.5 | 65.2 | 97.8 | 163.0 | 271.7 |
300 | 10.2 | 32.6 | 43.5 | 65.2 | 97.8 | 163.0 | 271.7 |
325 | 9.3 | 32.6 | 43.5 | 65.2 | 97.8 | 163.0 | 271.7 |
350 | 8.4 | 32.6 | 43.4 | 65.1 | 97.7 | 162.8 | 271.3 |
375 | 7.4 | 32.4 | 43.2 | 64.8 | 97.2 | 161.9 | 269.9 |
400 | 6.5 | 32.1 | 42.8 | 64.2 | 96.2 | 160.4 | 267.4 |
425 | 5.5 | 31.6 | 42.2 | 63.3 | 94.9 | 158.2 | 263.6 |
450 | 4.6 | 26.9 | 35.9 | 53.8 | 80.7 | 134.5 | 224.2 |
475 | 3.7 | 20.8 | 27.7 | 41.5 | 62.3 | 103.8 | 173.0 |
Class 150 Flanges | Class 300 Flanges | Class 600 Flanges | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Nominal Size Of Pipe (NPS) | # Studs And Bolts | Bolt And Stud Diameter | Studs Length | # Bolt And Stud | Diameter of Bolt And Stud | Studs Length | # Bolt And Stud | Diameter of Bolt And Stud | Studs Length | |||
1/16 RF (Raised Face) | RTJ (Ring Type Joint) | 1/16 RF (Raised Face) | RTJ (Ring Type Joint) | 1/4 RF (Raised Face) | RTJ (Ring Type Joint) | |||||||
1/2 | 4 | 0.50 | 2-1/4 | – | 4 | 0.50 | 2-1/2 | 3 | 4 | 0.50 | 3 | 3 |
3/4 | 4 | 0.50 | 2-1/2 | – | 4 | 0.63 | 3 | 3-1/2 | 4 | 0.63 | 3-1/2 | 3-1/2 |
1 | 4 | 0.50 | 2-1/2 | 3 | 4 | 0.63 | 3 | 3-1/2 | 4 | 0.63 | 3-1/2 | 3-1/2 |
1-1/4 | 4 | 0.50 | 2-3/4 | 3-1/4 | 4 | 0.63 | 3-1/4 | 3-3/4 | 4 | 0.63 | 3-3/4 | 3-3/4 |
1-1/2 | 4 | 0.50 | 2-3/4 | 3-1/4 | 4 | 0.75 | 3-1/2 | 4 | 4 | 0.75 | 4-1/4 | 4-1/4 |
2 | 4 | 0.63 | 3-1/4 | 3-3/4 | 8 | 0.63 | 3-1/2 | 4 | 8 | 0.63 | 4-1/4 | 4-1/4 |
2-1/2 | 4 | 0.63 | 3-1/2 | 4 | 8 | 0.75 | 4 | 4-1/2 | 8 | 0.75 | 4-3/4 | 4-3/4 |
3 | 4 | 0.63 | 3-1/2 | 4 | 8 | 0.75 | 4-1/4 | 4-3/4 | 8 | 0.75 | 5 | 5 |
3-1/2 | 8 | 0.63 | 3-1/2 | 4 | 8 | 0.75 | 4-1/4 | 5 | 8 | 0.88 | 5-1/2 | 5-1/2 |
4 | 8 | 0.63 | 3-1/2 | 4 | 8 | 0.75 | 4-1/2 | 5 | 8 | 0.88 | 5-3/4 | 5-3/4 |
5 | 8 | 0.75 | 3-3/4 | 4-1/4 | 8 | 0.75 | 4-3/4 | 5-1/4 | 8 | 1.00 | 6-1/2 | 6-1/2 |
6 | 8 | 0.75 | 4 | 4-1/2 | 12 | 0.75 | 4-3/4 | 5-1/2 | 12 | 1.00 | 6-3/4 | 6-3/4 |
8 | 8 | 0.75 | 4-1/4 | 4-3/4 | 12 | 0.88 | 5-1/2 | 6 | 12 | 1.13 | 7-1/2 | 7-3/4 |
10 | 12 | 0.88 | 4-1/2 | 5 | 16 | 1.00 | 6-1/4 | 6-3/4 | 16 | 1.25 | 8-1/2 | 8-1/2 |
12 | 12 | 0.88 | 4-3/4 | 5-1/4 | 16 | 1.13 | 6-3/4 | 7-1/4 | 20 | 1.25 | 8-3/4 | 8-3/4 |
14 | 12 | 1.00 | 5-1/4 | 5-3/4 | 20 | 1.13 | 7 | 7-1/2 | 20 | 1.38 | 9-1/4 | 9-1/4 |
16 | 16 | 1.00 | 5-1/4 | 5-3/4 | 20 | 1.25 | 7-1/2 | 8 | 20 | 1.50 | 10 | 10 |
18 | 16 | 1.13 | 5-3/4 | 6-1/4 | 24 | 1.25 | 7-3/4 | 8-1/4 | 20 | 1.63 | 10-3/4 | 10-3/4 |
20 | 20 | 1.13 | 6-1/4 | 6-3/4 | 24 | 1.25 | 8 | 8-3/4 | 24 | 1.63 | 11-1/4 | 11-1/2 |
24 | 20 | 1.25 | 6-3/4 | 7-1/4 | 24 | 1.50 | 9 | 10 | 24 | 1.88 | 13 | 13-1/4 |
Wll Thickness Of ASTM A182 F53 Flanges | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NPS | Outside Diameter (O.D.) | Sch/ Schedule 10 | Sch/ Schedule 20 | Sch/ Schedule 30 | STD Wall | Sch/ Schedule 40 | Sch/ Schedule 60 | EXT Hvy | Sch/ Schedule 80 | Sch/ Schedule 100 | Sch/ Schedule 120 | Sch/ Schedule 140 | Sch/ Schedule 160 | XX Hvy |
½ | 0.84 | 0.083 | 0.109 | 0.109 | 0.147 | 0.147 | 0.188 | 0.294 | ||||||
¾ | 1.05 | 0.083 | 0.113 | 0.113 | 0.154 | 0.154 | 0.219 | 0.308 | ||||||
1 | 1.315 | 0.109 | 0.133 | 0.133 | 0.179 | 0.179 | 0.25 | 0.358 | ||||||
1 ¼ | 1.66 | 0.109 | 0.14 | 0.14 | 0.191 | 0.191 | 0.25 | 0.382 | ||||||
1 ½ | 1.9 | 0.109 | 0.145 | 0.145 | 0.2 | 0.2 | 0.281 | 0.4 | ||||||
2 | 2.375 | 0.109 | 0.154 | 0.154 | 0.218 | 0.218 | 0.344 | 0.436 | ||||||
2 ½ | 2.875 | 0.12 | 0.203 | 0.203 | 0.276 | 0.276 | 0.375 | 0.552 | ||||||
3 | 3.5 | 0.12 | 0.216 | 0.216 | 0.3 | 0.3 | 0.438 | 0.6 | ||||||
3 ½ | 4 | 0.12 | 0.226 | 0.226 | 0.318 | 0.318 | 0.636 | |||||||
4 | 4.5 | 0.12 | 0.237 | 0.237 | 0.337 | 0.337 | 0.438 | 0.531 | 0.674 | |||||
5 | 5.563 | 0.134 | 0.258 | 0.258 | 0.375 | 0.375 | 0.5 | 0.625 | 0.75 | |||||
6 | 6.625 | 0.134 | 0.28 | 0.28 | 0.432 | 0.432 | 0.562 | 0.719 | 0.864 | |||||
8 | 8.625 | 0.148 | 0.25 | 0.277 | 0.322 | 0.322 | 0.406 | 0.5 | 0.5 | 0.594 | 0.719 | 0.812 | 0.906 | 0.875 |
10 | 10.75 | 0.165 | 0.25 | 0.307 | 0.365 | 0.365 | 0.5 | 0.5 | 0.594 | 0.719 | 0.844 | 1 | 1.125 | 1 |
12 | 12.75 | 0.18 | 0.25 | 0.33 | 0.375 | 0.406 | 0.562 | 0.5 | 0.688 | 0.844 | 1 | 1.125 | 1.312 | 1 |
14 | 14 | 0.25 | 0.312 | 0.375 | 0.375 | 0.438 | 0.594 | 0.5 | 0.75 | 0.938 | 1.094 | 1.25 | 1.406 | |
16 | 16 | 0.25 | 0.312 | 0.375 | 0.375 | 0.5 | 0.656 | 0.5 | 0.844 | 1.031 | 1.219 | 1.438 | 1.594 | |
18 | 18 | 0.25 | 0.312 | 0.438 | 0.375 | 0.562 | 0.75 | 0.5 | 0.938 | 1.156 | 1.375 | 1.562 | 1.781 | |
20 | 20 | 0.25 | 0.375 | 0.5 | 0.375 | 0.594 | 0.812 | 0.5 | 1.031 | 1.281 | 1.5 | 1.75 | 1.969 | |
22 | 22 | 0.25 | 0.375 | 0.5 | ||||||||||
24 | 24 | 0.25 | 0.375 | 0.562 | 0.375 | 0.688 | 0.969 | 0.5 | 1.219 | 1.531 | 1.812 | 2.062 | 2.344 | …….. |
Size in Inches | Size in Millmeter | Max. Radial Projection of Imperfections that are | |
---|---|---|---|
Serrations, No Deeper Than the Bottom, Millmeter | Serrations, Deeper Than the Bottom, Millmeter | ||
1/2 | 15 | 3.0 | 1.5 |
3/4 | 20 | 3.0 | 1.5 |
1 | 25 | 3.0 | 1.5 |
1 1/4 | 32 | 3.0 | 1.5 |
1 1/2 | 40 | 3.0 | 1.5 |
2 | 50 | 3.0 | 1.5 |
2 1/2 | 65 | 3.0 | 1.5 |
3 | 80 | 4.5 | 1.5 |
3 1/2 | 90 | 6.0 | 3.0 |
4 | 100 | 6.0 | 3.0 |
5 | 125 | 6.0 | 3.0 |
6 | 150 | 6.0 | 3.0 |
8 | 200 | 8.0 | 4.5 |
10 | 250 | 8.0 | 4.5 |
12 | 300 | 8.0 | 4.5 |
14 | 350 | 8.0 | 4.5 |
16 | 400 | 10.0 | 4.5 |
18 | 450 | 12.0 | 6.0 |
20 | 500 | 12.0 | 6.0 |
24 | 600 | 12.0 | 6.0 |
Nominal Size Of Pipe (NPS) | Gasket (I.D.) Inside Diameter (Inches) | Gasket (O.D.) Outside Diameter | ||||
---|---|---|---|---|---|---|
150 LBS | 300 LBS | 400 LBS | 600 LBS | 900 LBS | ||
1/2 | 0.84 | 1.875 | 2.125 | 2.125 | 2.125 | 2.50 |
3/4 | 1.06 | 2.25 | 2.625 | 2.625 | 2.625 | 2.75 |
1 | 1.31 | 2.625 | 2.875 | 2.875 | 2.875 | 3.125 |
1 1/4 | 1.66 | 3 | 3.25 | 3.25 | 3.25 | 3.50 |
1 1/2 | 1.91 | 3.375 | 3.75 | 3.75 | 3.75 | 3.875 |
2 | 2.38 | 4.125 | 4.375 | 4.375 | 4.375 | 5.625 |
2 1/2 | 2.88 | 4.875 | 5.125 | 5.125 | 5.125 | 6.50 |
3 | 3.50 | 5.375 | 5.875 | 5.875 | 5.875 | 6.625 |
4 | 4.50 | 6.875 | 7.125 | 7.00 | 7.625 | 8.125 |
5 | 5.56 | 7.75 | 8.50 | 8.375 | 9.50 | 9.75 |
6 | 6.62 | 8.75 | 9.875 | 9.75 | 10.50 | 11.375 |
8 | 8.62 | 11 | 12.125 | 12.00 | 12.625 | 14.125 |
10 | 10.75 | 13.375 | 14.25 | 14.125 | 15.75 | 17.125 |
12 | 12.75 | 16.125 | 16.625 | 16.50 | 18.00 | 19.625 |
C | Mn | Si | P | S | Ni | N | Fe | Cr | Mo |
---|---|---|---|---|---|---|---|---|---|
0.030 maximum | 1.20 maximum | 0.80 maximum | 0.035 maximum | 0.020 maximum | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 minimum | 24.00 – 26.00 | 3.00 – 5.00 |
Melting Point (°C) | Melting Point (°F) | Density (g/cm 3) | Density (lb/in 3) |
---|---|---|---|
1350 | 2460 | 7.8 | 0.281 |
Europe, Singapore, USA, Malaysia | ASTM A182 F53 Weld Neck Flange |
Malaysia, Colombia, South Africa, Turkey | A182 Gr F53 Super Duplex Steel Blind Flanges |
Singapore, Canada, Malaysia, Iran | F53 Super Duplex Stainless Steel Round Bar |
UK, Philippines, Bahrain, United Arab Emirates (UAE) | ASTM A182 F53 Round Bar |
United Kingdom -UK, China, South Africa, Chile | ASTM A182 F53 UNS S32750 Round Bars |
Canada, Japan, Saudi Arabia (KSA), Italy | ASME Sa 182 F53 Slip On Flange |
Spain, Malaysia, Germany, Australia | UNS S32750 Hex Bolts |
ASTM A182 GR.F53 Fasteners | Super Duplex SS Flanges |
Poland, Romania, Kuwait, Singapore | S32750 Super Duplex Hex Bolts |
Malaysia, South Korea, Bangladesh, UK | UNS S32750 Super Duplex Socket Weld Flange |
Mexico, Taiwan, Thailand, Malaysia | UNS S32750 Round Bar |
Philippines, Malaysia, Philippines, Netherlands | F53 Super Duplex Stainless Steel Nuts |