Aluminium Fittings

ASTM B241/ B361 Grade 6061 Aluminum Socket Weld Elbow, Nipples, Tee And Threaded Coupling Manufacturer In India.


We are oldest Aluminum Fittings suppliers, Aluminium is a highly ductile and malleable metal. Aluminum Threaded Coupling aluminium melting point is as low as 660.32 °C or 1220.58 °F. A low melting point combined with its high ductility, ensures the end product gets and retains its desirable shape. The density of Aluminum Buttweld Pipe Fittings is low. Since it is light weight, aluminium can be used to increase the load capacity during energy consumption. Its chemical composition can be modified with different elements according to its end use in order to produce Aluminum Socket Weld Fittings.



aluminum buttweld fittings manufacturer

01
Aluminum Buttweld Pipe Fittings
01
Aluminum Buttweld Pipe Fittings
02
ASTM B361 Grade 6061 Elbow
02
ASTM B361 Grade 6061 Elbow
03
ASME B241 Gr 6082 Reducing Tee
03
ASME B241 Gr 6082 Reducing Tee

aluminum fittings pdf


Table of Content

Aluminum Pipe End Caps is known for high corrosion resistance to common atmospheric and marine atmospheres. Its corrosion resistance and scratch resistance can be enhanced by anodizing.Aluminum is a light metal, about the third of the density of steel, copper, and brass.Aluminum is a good conductor of heat and electricity. When measured by equal cross-sectional area, electrical grade aluminum has conductivity which is approximately 62% of electrical grade annealed copper. However, when compared using equal weight, the conductivity of aluminum is 204% of copper.Aluminum is non-toxic and is commonly used in contact with foodstuffs.

Finding Aluminum Fittings Suppliers In India? Buy In Pipe Bends, End Caps, Elbows, Concentric Reducer, Weld Fittings In AA6061, AA6082, AA6083, AA5083 Grades, View Sizes And Dimensions.


Aluminum Weld Fittings are known to have high resistance to corrosion. Through the process of passivation, it forms an oxide layer on the surface of the product. This oxide layer is a shell that hinders corrosion. Another property of aluminium is its conductivity. Aluminium products are good conductors of heat and electricity. Hence, it is used in power transmission lines. Besides this Aluminum Pipe Reducer is very durable and non-toxic.

Non-heat-treated alloys have increased the strength due to being cold worked. Addition of magnesium to cold worked aluminium alloys intensifies its strength. For example - Manganese is the primary alloying element followed by trace amounts of magnesium. 3003 has moderate strength and good workability and is used in applications such as heat exchangers. 4xxx series alloys contain silicon, which is used to lower the melting point of aluminium, without making it brittle.

The primary alloying agent in the 5xxx series is Magnesium.5xxx series possess moderate to high strength, good weldability and have good resistance to corrosion in the marine environment. therefore, Aluminum Pipe Fittings are widely used in construction, building, storage tanks, pressure vessels and marine applications. find out more about Aluminum Elbow Suppliers .


Aluminium Fittings Price List

Size Schedule Price In INR (Per Piece)
Aluminum Concentric Reducer
3/4 X 1/2" SCH 160 450.00
1 X 1/2 SCH 160 650.00
4 X 2" SCH 80 850.00
6 X 4" SCH 80 1070.00
8 X 4" SCH 160 1200.00
Aluminum Equal Tee
1/2" SCH 40 350.00
3/4" SCH 40 550.00
2" SCH 40 758.00
4" SCH 40 944.00
6" SCH 40 1129.00
Aluminum Elbow
3/4" SCH 40 250.00
2" SCH 40 550.00
4" SCH 40 745.00
6" SCH 40 950.00
8" SCH 40 1129.00
10" SCH 40 1304.00
12" SCH 40 1570.00

Most Reliable Supplier Of Aluminum Buttweld Pipe Fittings in India. For final ASTM B241 6063 Aluminium Elbow Price List Please Call on +91(22) – 6743 8321 or drop an E-Mail : enquiry@siddhagirimetals.com.


Suppliers Of Asme Sb241/ Sb361 Aluminum 6063 Long/ Short Radius Elbow And Bends In Mumbai.


Aluminum Buttweld Pipe Fittings Specification

Manufacturer Specifications Of : Aluminum Buttweld Pipe Fittings
Top Selling Type Of Buttweld Fittings Reducer Fittings, End Cap Fittings, Elbow Fittings, Tee Fittings, Pipe Bend Fittings
Pressure Rating Class : Class 150 Fittings To Class 2500 Fittings
Size Chart : Seamless Fittings = 1/2" To 10" (Inches)
ButtWeld Fittings = 1/2" To 48" (Inches)
Type Of Pipe Connection Welding Fittings
Wall Thickness : SCH10 Fittings To SCH 160 Fittings, XXS ETC.
End Type Threaded Fittings End And Welding End Fittings
Standard Dimensions Of : ASME B16.9 Fittings And ASME B16.28 Fittings, MSS-SP-43 Fittings And BS 3799 Fittings, EN Fittings And DIN Fittings
We Supply Large Amount Of Aluminum Pipe Fittings Jeddah, Ho-Chi-Minh-City, Faridabad, Dammam, Jamshedpur, Thane, Ashburn, Secunderabad, London, Baku, Cairo, Sao-Paulo, Chicago, Dubai, Zhengzhou, Al-Jubail, Patna, Vasai-Virar, Lucknow, Ambernath, Batam, Vadodara, Guwahati, Seoul, Doha, Nagpur, Chennai, Dombivli, Nashik, Hyderabad, Navi-Mumbai, Ajman, Jaipur, Rajkot, Jakarta, Puchong, Raipur, Istanbul, Ahmedabad, Chandigarh, Calgary, Ludhiana, Oyama, Alexandria, New-Delhi, Kuala-Lumpur, Perth, Shanghai, Bhopal, Karachi, Surat, Dhaka, Ankleshwar, Hanoi, Panipat, Agra, Bhubaneswar, Melbourne, Ghaziabad, Noida, Indore, Beijing, Jamnagar, Santiago, Johor-Bahru, Singapore, Surabaya, Delhi, Mexico-City, Visakhapatnam, Pimpri-Chinchwad, Kota, Coimbatore, Hazira, Mumbai, Quezon-City, Mysuru, Manama, Bangkok, Pune, Riyadh, Kalyan, Abu-Dhabi, Gurgaon, Sydney, Vapi, Amsterdam, Lagos, Houston, Madrid, Tehran, Bengaluru, Vung-Tau, Kolkata, Dallas, Busan, Paris, Al-Khobar, Shah-Alam, Sharjah, Brisbane, Hangzhou, Tiruchirappalli, Kochi, Bogota, Milan,

Know More About Specification Of Aluminium 1050 Weld Fittings And Socket Weld Branch Outlets.

ASTM B361 Grade 6061 Elbow Maximum Pressure

Aluminum Buttweld Pipe Fittings Pressure Rating Table (psig)
ASME B16.9 Fittings Pressure Rating Type Of Pressure Class
Class 150 LBS Fittings Class 300 LBS Fittings
1/4 - 1" (Inches) 1 1/4 - 2" (Inches) 2 1/2 - 3" (Inches)
(oF) (oC)
-20 to 150 -29 to 66 300 2000 1500 1000
200 93 265 1785 1350 910
250 121 225 1575 1200 825
300 149 185 1360 1050 735
350 177 150 1150 900 650
400 204 - 935 750 560
450 232 - 725 600 475
500 260 - 510 450 385
550 288 - 300 300 300

Aluminium Pipe Fittings Dimensional Format

Aluminium Pipe Fittings Dimensional Format

Normal Size Of Pipe (NPS) Outer Diameter (O.D.) ASME B16.9 90 Degree Elbow ASME B16.9 45 Degree Elbow ASME B16.9 180 Degree Elbow
(inches) ASME B16.9 LR Elbow ASME B16.9 SR Elbow ASME B16.9 Long Radius Elbow ASME B16.9 Long Radius Elbow
(MM/ millimeter) (Inches/ inch.) Face To Center
(Inche)
Face To Center
(Inche)
Face To Center
(Inche)
Radius
(Inche)
Center to Center
(Inches)
Back to face
(Inches)
1/2 21.3 0.840 1 1/2 5/8 2 1 7/8
3/4 26.7 1.050 1 1/8 7/16 2 1/4 1 11/16
1 33.4 1.315 1 1/2 1 7/8 3 2 3/16
1 1/4 42.2 1.660 1 7/8 1 1/4 1 3 3/4 2 3/4
1 1/2 48.3 1.900 2 1/4 1 1/2 1 1/8 3 4 1/2 3 1/4
2 60.3 2.375 3 2 1 3/8 4 6 4 3/16
2 1/2 73.0 2.875 3 3/4 2 1/2 1 3/4 5 7 1/2 5 3/16
3 88.9 3.500 4 1/2 3 2 6 9 6 1/4
3 1/2 101.6 4.000 5 1/4 3 1/2 2 1/4 7 10 1/2 7 1/4
4 114.3 4.500 6 4 2 1/2 8 12 8 1/4
5 141.3 5.563 7 1/2 5 3 1/8 10 15 10 5/16
6 168.3 6.625 9 6 3 3/4 12 18 12 5/16
8 219.1 8.625 12 8 5 12 24 16 5/16
10 273.1 10.750 15 10 6 1/4 15 30 20 3/8
12 323.9 12.750 18 12 7 1/2 18 36 24 3/8

Normal Size Of Pipe (NPS) Outer Diameter (O.D.) Buttweld End Cap Fittings Buttweld Straight Tee Fittings Buttweld Reducing Cross Fittings Buttweld Long And Short Stub Ends Fittings
(Inches/ inch.) (MM/ millimeter) (Inche) Length
Inche
Center to End
Inches
Center to End
Inches
Lap Jpont Diameter
Inches
Length Of Long
Inches
Length Of Short
Inches
1/2 21.3 0.840 1 1 1 3/8 3 2
3/4 26.7 1.050 1 1 1/8 1 11/16 3 2
1 33.4 1.315 1 1/2 1 1/2 1 1/2 2 4 2
1 1/4 42.2 1.660 1 1/2 1 7/8 1 7/8 2 1/2 4 2
1 1/2 48.3 1.900 1 1/2 2 1/4 2 1/4 2 7/8 4 2
2 60.3 2.375 1 1/2 2 1/2 2 1/2 3 5/8 6 2 1/2
2 1/2 73.0 2.875 1 1/2 3 3 4 1/8 6 2 1/2
3 88.9 3.500 2 3 3/8 3 3/8 5 6 2 1/2
3 1/2 101.6 4.000 2 1/2 3 3/4 3 3/4 5 1/2 6 3
4 114.3 4.500 2 1/2 4 1/8 4 1/8 6 3/16 6 3
5 141.3 5.563 3 4 7/8 4 7/8 7 5/16 8 3
6 168.3 6.625 3 1/2 5 5/8 5 5/8 8 1/2 8 3 1/2
8 219.1 8.625 4 7 7 10 5/8 8 4
10 273.1 10.750 5 8 1/2 8 1/2 12 3/4 10 5
12 323.9 12.750 6 10 10 15 10 6

Price List Of Gr 1060 Aluminium Pipe End Caps And 2D/ 3D/9D Tube Bends, Best Price Guranteed On Aluminum 90 And 45 Degree Elbow.

ASTM B241 Gr 6082 Buttweld Tee Weight Chart

DN (Normal Size Of Pipe) AS Per ANSI/ASME B16.9

10S Schedule

40S Schedule

80S Schedule

ANSI B16.9 90 Deg Elbow

ANSI B16.9 45 Deg Elbow ANSI B16.9 Equal Pipe Tee

ANSI B16.9 90 Deg Elbow

ANSI B16.9 45 Deg Elbow

ANSI B16.9 Equal Pipe Tee

ANSI B16.9 90 Deg Elbow ANSI B16.9 45 Deg Elbow

ANSI B16.9 Equal Pipe Tee

8

0.02

0.01

0.03

0.03

0.02

0.06

0.04

0.03

0.07

10

0.03

0.02

0.05

0.03

0.02

0.03

0.06

0.04

0.09

15

0.06

0.03

0.09

0.08

0.04

0.10

0.10

0.05

0.14

20

0.07

0.03

0.13

0.08

0.04

0.17

0.11

0.05

0.20

25

0.14

0.08

0.28

0.15

0.11

0.29

0.22

0.14

0.38

32

0.23

0.11

0.49

0.26

0.17

0.59

0.40

0.23

0.68

40

0.30

0.17

0.68

0.40

0.23

0.86

0.51

0.29

1.02

50

0.50

0.25

0.85

0.70

0.4

1.28

0.91

0.59

1.59

65

0.85

0.48

1.41

1.40

0.77

2.19

1.81

0.99

3.13

80

1.25

0.63

1.77

2.20

1.08

3.31

2.97

1.50

4.45

90

1.70

0.75

2.67

2.83

1.42

4.08

4.00

2.00

5.44

100

2.10

1.08

3.46

4.47

2.09

5.27

6.18

2.81

7.71

150

5.45

2.72

8.07

10.89

5.44

10.99

16.32

8.16

13.61

200

10.20

5.33

15.65

21.54

10.77

20.91

33.11

16.56

28.12

250

18.15

9.75

26.46

38.56

19.27

35.38

51.71

25.86

49.90

300

25.80

13.62

39.46

59.42

29.71

62.14

79.38

39.69

83.91

DN (Normal Sizes Of Pipe) AS Per ANSI/ASME B16.9

10S Schedule

40S Schedule

80S Schedule

ASME B16.9 Concentric (Con) Reducer ASME B16.9 Eccentric (Ecc) Reducer ASME B16.9 Reducing And Unequal Tee ASME B16.9 Concentric (Con) Reducer ASME B16.9 Eccentric (Ecc) Reducer ASME B16.9 Reducing And Unequal Tee ASME B16.9 Concentric (Con) Reducer ASME B16.9 Eccentric (Ecc) Reducer ASME B16.9 Reducing And Unequal Tee

40x.25

0.19

0.19

0.60

0.26

0.26

0.76

0.34

0.34

0.90

50x25

0.28

0.28

0.73

0.40

0.40

1.10

0.54

0.54

1.37

50x40

0.31

0.31

0.76

0.45

0.45

1.15

0.59

0.59

1.43

80x.50

0.55

0.55

1.56

1.00

1.00

2.91

1.79

1.79

3.91

100x50

0.78

0.78

2.94

1.50

1.50

4.48

1.95

1.95

6.55

100x80

0.87

0.87

3.04

1.74

1.74

4.64

2.33

2.33

6.79

150x80

1.82

1.82

6.86

3.95

3.95

9.68

5.51

5.51

11.57

150x100

1.96

1.96

7.10

4.07

4.07

11.94

5.96

5.96

11.97

200x100

3.01

3.01

13.46

6.55

6.55

17.98

9.23

9.23

24.18

200x150

3.19

3.19

14.08

6.74

6.74

18.82

10.12

10.12

25.31


Aluminium Threaded Fittings Equivalent

STANDARD UNS WERKSTOFF NR.
Aluminum Buttweld Pipe Fittings A96082 3.1254

Aluminum End Cap Chemical Composition

Grade Si Fe Ti Cr Al Others Cu Zn Mn Mg
Aluminum Buttweld Pipe Fittings 0.40 - 0.80 0.70 maximum 0.15 maximum 0.04 - 0.35 Bal 0.15 maximum 0.15 - 0.40 0.25 maximum 0.15 maximum 0.8 - 1.2

Aluminum WP5086 Reducer Mechanical Properties

Yield Strength Elongation Density Melting Point Tensile Strength
Ksi – 21, MPa – 145 25 % 2.70 g/cm3 582 °C Ksi – 45, MPa – 310

Classic Isi Aluminium Fittings Size Chart

Outer Diameter And Inside Diameter Equivalent Diameter Of Pipe Nominal Typical Threads In Inches
5/16 0.313 1/16 27
13/32 0.405 1/8 27
35/64

0.540

1/4 18
43/64 0.675 3/8 18
27/32 0.840 1/2 14
1-3/64 1.050 3/4 14
1-5/16 1.315 1 11-1/2

1-21/32

1.660 1-1/4 11-1/2
1-29/32 1.900 1-1/2 11-1/2
2-3/8 2.375 2 11-1/2
2-7/8 2.875 2-1/2 8
3-1/2 3.500 3 8
4 4.000 3-1/2 8

Contact Us For Aluminum Buttweld Pipe Fittings Instant Delivery

Aluminum Threaded Coupling
Aluminum Threaded Coupling
Aluminum Buttweld 45 Deg Elbow
Aluminum Buttweld 45 Deg Elbow
Aluminum Socket Weld Fittings
Aluminum Socket Weld Fittings
Aluminum Pipe Reducer
Aluminum Pipe Reducer
Aluminum Pipe End
Aluminum Pipe End
Aluminum Tee
Aluminum Tee

A Supplier By Choice Of Aluminum Buttweld Pipe Fittings In Following Countries

Iran, Philippines, Canada, Chile Grade 6061 Aluminum Socket Weld Elbow
Europe, United Arab Emirates (UAE), Romania, Norway Aluminium Pipe Fittings
Sweden, Netherlands, Malaysia, Russia ASME B16.9 Aluminium Elbow Fittings
Mexico, Malaysia, Egypt, Los Alamos -Mexico Aluminum Threaded Coupling Fittings
Singapore, United Kingdom -UK, NY 12203 (USA), Malaysia Aluminum Buttweld Pipe Fittings
Dammam -KSA, UK, Philippines, Poland Aluminum Buttweld Fittings
Malaysia, Singapore, Europe, Qatar Aluminum Pipe End Caps
Czechia, Malaysia, Thailand, Japan Aluminum Weldable Fittings
Bangladesh, Colombia, Malaysia, China Aluminium Elbow
South Africa, Philippines, Kuwait, Taiwan Aluminum Concentric Reducer Fittings
Bahrain, Malaysia, Singapore, South Korea Aluminum Air Pipe Fittings
South Africa, Saudi Arabia (KSA), Kuwait, Brazil Aluminum Tee
Nigeria, UK, Australia, Philippines Aluminum Pipe End Cap
Malaysia, UAE, Hong Kong, Oman Aluminum Long Stub End Fittings