If medium strength with good resistance to atmospheric corrosion is what you are looking at in a sheet. Then 3003 Aluminum Plate is where your search ends. These Aluminium Sheets have a good finish with excellent formidability. Aluminium Foil is easily weldable as well hence they are categorised as general use aluminium alloy. Perforated Aluminium Sheet resists crevice corrosion and pitting and has a good working ability. Aluminium Plate Manufacturers In India recommend these sheets due to their high yield and tensile strength, and rugged construction. This allows the En573 Aluminium Mesh Sheet to provide long functionality and dimensional accuracy. When AMS 4003 Aluminium Strip are cold work they produce a temper with low ductility and high strength. It is not usually forged but is rolled and extruded. It is commonly used in sidings, roofing, gutters and downspouts.
These Aluminium Patterned Sheet are also used in automobile, fertilizers, textile, and gas industries. Furthermore, they are also used in refrigeration, cold storage, product packing, and air conditioning. The alloy used in Aluminium Condenser Coil is not hardened using heat treatment. Instead, work-hardening procedures like mechanical distortion involving hammering and rolling are used. Large radius and high elasticity are provided by Astm B221 Aluminium Trim Coil as it bends easily. And factors like temper, cross-sectional measurement, and alloy affect the minimum acceptable bend.
10mm/5mm/2mm Aluminium Plate is available with us. We also manufacture Aluminium Chequered Plate using high quality raw material and customise the shape size and dimensions as per the specific requirements of the customer. Astm-b-209m Aluminium Roofing Sheets are available at a competent price for our customers and our well trained staff helps you in every step of your purchase. From selection to delivery everything is taken care of.
Table of Content
| Specification | ASTM B221 / ASME SB221 |
|---|---|
| standards and approvals |
|
| Standard Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
| Thickness | 0.1 to 100 mm Thk |
| Width | 10-2500mm |
| Length | 2m, 2.44m, 3m, or as required |
| Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
| Stock available in form of | Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
| Manufacturers | Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO |
| Plasma profiles | As per customer's drawings |
| Value added services | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| Description | Price |
| Size 1.5m X 50m (20 Rolls) (Aluminium Sheet For Roofing) | 218 Rs |
| Embossed Aluminum Coil Plate | US $ 1800.0-2600.0 / Ton |
| Aluminium Roofing Sheet(5.5x1, 6.5x1 ,1mx1m,2.4x1.2m) | 122 Rs |
| Aluminum/Aluminium Sheet with Standard ASTM B209 (Alloy A1050 1060 1100 3003 3105 5005 5052 6061) | US $ 2500.0-3500.0 / Ton |
| HDPE Coated Aluminum Coils for Rainspout | US $ 2500.0-3500.0 / Ton |
| PE PVDF Color Coated Aluminum Sheet Coil Price for Decoration | US $ 2250.0-2300.0 / Ton |
| 5052 5083 6061 6063 7075 Extra Wide Customized Aluminum/Aluminium Sheet | US $ 2184.0-2936.0 / Ton |
| Aluminum Sheets for Structural Parts / Doors / Automobile Body Frame / Docorated Bright Strips/Battery Box | US $ 3100-3200 / Ton |
| Thickness (in mm) | |
|---|---|
| 0.0005, Temper: As rolled | 0.02, Temper: Half hard |
| 0.0004, Temper: As rolled | 0.02, Temper: Annealed |
| 0.00076, Temper: As rolled | 0.025, Temper: Half hard |
| 0.00065, Temper: As rolled | 0.025, Temper: Annealed |
| 0.001, Temper: As rolled | 0.030, Coil width: 15.05, Temper: Half hard |
| 0.002, Temper: Half hard | 0.05, Temper: Half hard |
| 0.002, Temper: As rolled | 0.038, Temper: Annealed |
| 0.0025, Temper: As rolled | 1.00, Temper: Annealed |
| 0.0025, Temper: As rolled, Condition: Surface oxide | 0.075, Temper: Half hard |
| 0.0125, Temper: Half hard | 0.015, Coil width: 0.03, Temper: Half hard |
| 0.005, Temper: Quarter hard | 2.00, Temper: Half hard |
| 0.005, Temper: Half hard | 2.00, Temper: 1/4 Hard |
| 0.01, Temper: Half hard | 3.00, Temper: 1/4 Hard |
| 0.0075, Temper: Half hard | 3.00, Temper: Annealed |
| 0.01, Coil width: 10, Temper: Half hard | 6.035, Temper: Hard |
| 0.015, Temper: Half hard | |
Sheet - Metric
| Thickness mm | Weight kg/sheet | Size m |
| 0.0300 | 4.07 | 2 x 1 |
| 0.0376 | 5.09 | 2 x 1 |
| 0.0400 | 6.03 | 2 x 1 |
| 0.0457 | 7.02 | 2 x 1 |
| 0.0500 | 7.09 | 2 x 1 |
| 0.0559 | 8.08 | 2 x 1 |
| 0.0600 | 9.04 | 2 x 1 |
| 0.0710 | 11.01 | 2 x 1 |
| 0.0800 | 12.06 | 2 x 1 |
| 0.0914 | 14.03 | 2 x 1 |
| 1.0000 | 15.07 | 2 x 1 |
| 1.0200 | 18.08 | 2 x 1 |
| 1.0220 | 19.02 | 2 x 1 |
| 1.0270 | 19.09 | 2 x 1 |
| 1.0420 | 22.03 | 2 x 1 |
| 1.0600 | 25.01 | 2 x 1 |
| 1.0780 | 28.00 | 2 x 1 |
| 2.0000 | 31.04 | 2 x 1 |
| 2.0030 | 31.09 | 2 x 1 |
| 2.0286 | 35.09 | 2 x 1 |
| 2.0500 | 39.03 | 2 x 1 |
| 2.0540 | 39.09 | 2 x 1 |
| 2.0640 | 41.04 | 2 x 1 |
| 3.0000 | 47.01 | 2 x 1 |
| 3.0250 | 51.00 | 2 x 1 |
| 4.0000 | 62.08 | 2 x 1 |
| 4.0060 | 63.07 | 2 x 1 |
| 4.0460 | 70.00 | 2 x 1 |
| 4.0760 | 74.07 | 2 x 1 |
| 5.0000 | 78.05 | 2 x 1 |
| 6.0000 | 94.02 | 2 x 1 |
Sheet - Imperial
| Size ft | Thickness in | Weight lbs/sheet |
| 10 x 3 | 0.0012 | 14.07 |
| 10 x 3 | 0.0014 | 17.02 |
| 10 x 3 | 0.0016 | 19.06 |
| 10 x 3 | 0.0018 | 22.01 |
| 10 x 3 | 0.0020 | 24.05 |
| 10 x 3 | 0.0022 | 27.00 |
| 10 x 3 | 0.0024 | 29.04 |
| 10 x 3 | 0.0028 | 34.04 |
| 10 x 3 | 0.0032 | 39.03 |
| 10 x 3 | 0.0036 | 44.02 |
| 10 x 3 | 0.0040 | 49.01 |
| 10 x 3 | 0.0047 | 57.07 |
| 10 x 3 | 0.0048 | 58.09 |
| 10 x 3 | 0.0050 | 61.03 |
| 10 x 3 | 0.0056 | 68.07 |
| 10 x 3 | 0.0063 | 77.03 |
| 10 x 3 | 0.0070 | 85.09 |
| 10 x 3 | 0.0078 | 95.07 |
| 10 x 3 | 0.0080 | 98.02 |
| 10 x 3 | 0.0090 | 110.04 |
| 10 x 3 | 0.0100 | 120.02 |
| 10 x 3 | 0.0098 | 120.02 |
| 10 x 3 | 0.0104 | 122.07 |
| 10 x 3 | 0.0118 | 144.08 |
| 10 x 3 | 0.0128 | 157.00 |
| 10 x 3 | 0.0157 | 192.06 |
| 10 x 3 | 0.0160 | 196.03 |
| 10 x 3 | 0.0176 | 215.09 |
| 10 x 3 | 0.0187 | 229.04 |
| 10 x 3 | 0.0197 | 241.07 |
| 10 x 3 | 0.0236 | 289.05 |
Aluminum Gauge, Width and Length | Est. Wt. per Sheet | Weight Lbs. per Sq Ft. |
|---|---|---|
7GA (.01874") | ||
| 48 x 96 | 251.09 | 7.0871 |
| 48 x 120 | 314.08 | 7.0871 |
| 48 x 144 | 377.08 | 7.0871 |
10GA (.0135”) | ||
| 36 x 120 | 170.01 | 5.0670 |
| 48 x 96 | 181.04 | 5.0670 |
| 48 x 120 | 226.08 | 5.0670 |
| 60 x 120* | 283.05 | 5.0670 |
| 60 x 144* | 340.02 | 5.0670 |
| 72 x 120* | 340.02 | 5.0670 |
11 GA (.0120") | ||
| 36 x 96 | 121.00 | 5.0040 |
| 36 x 120 | 151.02 | 5.0040 |
| 36 x 144 | 181.04 | 5.0040 |
| 48 x 96 | 161.03 | 5.0040 |
| 48 x 120 | 201.06 | 5.0040 |
| 48 x 144 | 241.09 | 5.0040 |
| 60 x 120 | 252.00 | 5.0040 |
| 60 x 144 | 302.04 | 5.0040 |
| 72 x 120* | 302.04 | 5.0040 |
| 72 x 144* | 362.09 | 5.0040 |
12 Ga.0 (.0105") | ||
| 36 x 96 | 105.08 | 4.0410 |
| 36 x 120 | 132.03 | 4.0410 |
| 36 x 144 | 158.08 | 4.0410 |
| 42 x 120 | 154.04 | 4.0410 |
| 48 x 96 | 141.01 | 4.0410 |
| 48 x 120 | 176.04 | 4.0410 |
| 48 x 144 | 211.07 | 4.0410 |
| 60 x 96 | 176.04 | 4.0410 |
| 60 x 120 | 220.05 | 4.0410 |
| 60 x 144 | 264.06 | 4.0410 |
| 72 x 120* | 264.06 | 4.0410 |
| 72 x 144 | 317.05 | 4.0410 |
13 Ga (.0090") | ||
| 36 x 96 | 90.072 | 3.0780 |
| 36 x 120 | 113.04 | 3.0780 |
| 48 x 120 | 151.02 | 3.0780 |
14 Ga.0 (.0075") | ||
| 30 x 120 | 78.075 | 3.0150 |
| 36 x 96 | 75.060 | 3.0150 |
| 36 x 120 | 94.050 | 3.0150 |
| 36 x 144 | 113.04 | 3.0150 |
| 42 x 120 | 110.03 | 3.0150 |
| 42 x 144 | 132.03 | 3.0150 |
| 48 x 96 | 100.08 | 3.0150 |
| 48 x 120 | 126.00 | 3.0150 |
| 48 x 144 | 151.02 | 3.0150 |
| 60 x 120 | 157.05 | 3.0150 |
| 60 x 144 | 189.00 | 3.0150 |
| 72 x 120 | 189.00 | 3.0150 |
| 72 x 144 | 226.08 | 3.0150 |
16 Ga.0 (.0060") | ||
| 30 x 96 | 50.040 | 2.0520 |
| 30 x 120 | 63.000 | 2.0520 |
| 36 x 96 | 60.048 | 2.0520 |
| 36 x 120 | 75.060 | 2.0520 |
| 36 x 144 | 90.072 | 2.0520 |
| 42 x 120 | 88.020 | 2.0520 |
| 48 x 96 | 80.064 | 2.0520 |
| 48 x 120 | 100.08 | 2.0520 |
| 48 x 144 | 121.00 | 2.0520 |
| 60 x 96 | 100.08 | 2.0520 |
| 60 x 120 | 126.00 | 2.0520 |
| 60 x 144 | 151.02 | 2.0520 |
18 Ga.0 (.0048") | ||
| 30 x 96 | 40.032 | 2.0016 |
| 30 x 120 | 50.040 | 2.0016 |
| 36 x 96 | 48.038 | 2.0016 |
| 36 x 120 | 60.048 | 2.0016 |
| 36 x 144 | 72.058 | 2.0016 |
| 42 x 120 | 70.056 | 2.0016 |
| 48 x 96 | 64.051 | 2.0016 |
| 48 x 120 | 80.064 | 2.0016 |
| 48 x 144 | 96.077 | 2.0016 |
| 60 x 120 | 100.08 | 2.0016 |
| 60 x 144 | 121.00 | 2.0016 |
19 Ga.0 (.0042") | ||
| 36 x 120 | 52.092 | 1.0764 |
20 Ga.0 (.0036") | ||
| 30 x 96 | 30.024 | 1.0512 |
| 30 x 120 | 37.080 | 1.0512 |
| 36 x 96 | 36.029 | 1.0512 |
| 36 x 120 | 45.036 | 1.0512 |
| 36 x 144 | 54.043 | 1.0512 |
| 42 x 120 | 52.092 | 1.0512 |
| 48 x 96 | 48.038 | 1.0512 |
| 48 x 120 | 60.048 | 1.0512 |
| 48 x 144 | 72.058 | 1.0512 |
22 Ga.0 (.0030") | ||
| 30 x 96 | 25.020 | 1.0260 |
| 30 x 120 | 61.050 | 1.0260 |
| 36 x 96 | 30.024 | 1.0260 |
| 36 x 120 | 37.080 | 1.0260 |
| 36 x 144 | 45.036 | 1.0260 |
| 48 x 96 | 40.032 | 1.0260 |
| 48 x 120 | 50.040 | 1.0260 |
24 Ga.0 (.0024") | ||
| 30 x 96 | 20.016 | 1.0008 |
| 30 x 120 | 25.020 | 1.0008 |
| 36 x 96 | 24.019 | 1.0008 |
| 36 x 120 | 30.024 | 1.0008 |
| 48 x 96 | 32.026 | 1.0008 |
| 48 x 120 | 40.032 | 1.0008 |
26 Ga.0 (.0018") | ||
| 30 x 96 | 15.012 | .07560 |
| 30 x 120 | 18.090 | .07560 |
| 36 x 96 | 18.014 | .07560 |
| 36 x 120 | 22.068 | .07560 |
| 48 x 96 | 24.01 | .07560 |
| 48 x 120 | 30.024 | .07560 |
28 Ga.0 (.0015") | ||
| 36 x 96 | 15.012 | .0630 |
| 36 x 120 | 18.090 | .0630 |
| Size (in Inches) | Size (in mm) | ||
|---|---|---|---|
| .0875" | .0125" | 22.02 | 3.018 |
| 1" | .0134" | 25.04 | 3.040 |
| 1.0125" | .0156" | 28.06 | 3.096 |
| 1.0250" | .0187" | 31.08 | 4.075 |
| 1.0500" | .0250" | 38.01 | 6.035 |
| 1.0750" | .0312" | 44.05 | 7.092 |
| 2" | .0375" | 50.08 | 9.053 |
| 2.0500" | .0500" | 63.05 | 12.07 |
| 3" | .0625" | 76.02 | 15.09 |
| .0750" | 19.01 | ||
| 1.00 | 1.02 |
| 0.06 | 0.08 |
| 1.08 | 2.00 |
| 1.05 | 1.06 |
| 5.00 | 6.00 |
| 3.00 | 4.00 |
| 12.00 | 15.00 |
| 8.00 | 10.00 |
| 20.00 | 25.04 |
| Example | 4.50g/cm³ | x | 6mm | x | 2m | x | 1m | = | 54.00 kg |
|---|---|---|---|---|---|---|---|---|---|
| Metric | density (g/cm³) | x | T | x | W | x | L | = | weight |
| Example | 0.163 lbs/in³ | x | 4in | x | 48in | x | 144in | = | 4506.6 lbs |
|---|---|---|---|---|---|---|---|---|---|
| Imperial | density (lbs/in³) | x | T | x | W | x | L | = | weight |
The calculation tool was programmed with best care and attention. For all that Rime does not guarantee the correctness of the calculation result!
The tool is using this formula: Weight = L/1000 * W/1000 * T * S
| Gauge Number | MM | Inches |
| 8 | 4.0365 | .017187 |
| 9 | 3.0968 | .015625 |
| 10 | 3.0571 | .014062 |
| 11 | 3.0175 | .0125 |
| 12 | 2.0778 | .010937 |
| 14 | 1.0984 | .007812 |
| 16 | 1.0587 | .00625 |
| 18 | 1.0270 | .0050 |
| 20 | .09525 | .00375 |
| 22 | .07937 | .003125 |
| 24 | .0635 | .0025 |
| 26 | .0476 | .001875 |
| 28 | .0396 | .001562 |
| 30 | .03175 | .00125 |
| Gauge | LB/Sq In. | LB/Sq. Ft. | Gauge Tolerance | ||
|---|---|---|---|---|---|
| 96″ Wide | 72″ Wide | ||||
| 3/8 | 0.03750 | 0.011456 | 16.0496 | +.0060″ -.0010″ | +.0055″ -.0010″ |
| 7/16 | 0.04375 | 0.013250 | 19.0080 | ||
| 1/2 | 0.05000 | 0.015044 | 21.0633 | ||
| 9/16 | 0.05625 | 0.016838 | 24.0247 | ||
| 5/8 | 0.06250 | 0.018633 | 26.0831 | ||
| 11/16 | 0.06875 | 0.020427 | 29.0415 | ||
| 3/16 | 0.01875 | 0.005958 | 8.0579 | +.0050″ -.0010″ | +.0045″ -.0010″ |
| 7/32 | 0.02187 | 0.006854 | 9.0870 | ||
| 1/4 | 0.02500 | 0.007750 | 11.0162 | ||
| 5/16 | 0.03125 | 0.009546 | 13.0746 | ||
| 1 | 1.00000 | 0.029628 | 42.0665 | +.0075 -.0010″ | +.0070″ -.0010″ |
| 1-1/8 | 1.01250 | 0.033217 | 47.0833 | ||
| 1-1/4 | 1.02500 | 0.036806 | 53.0001 | ||
| 1-3/8 | 1.03750 | 0.040395 | 58.0169 | ||
| 1-1/2 | 1.05000 | 0.043984 | 63.0337 | ||
| 1-3/4 | 1.07500 | 0.051161 | 73.0672 | ||
| 3/4 | 0.07500 | 0.022308 | 32.0123 | +.0065″ -.0010″ | +.0060″ -.0010″ |
| 13/16 | 0.08125 | 0.024102 | 34.0707 | ||
| 7/8 | 0.08750 | 0.025897 | 37.0291 | ||
| 15/16 | 0.09375 | 0.027691 | 39.0875 | ||
| 3 | 3.00000 | 0.087709 | 126.0301 | +.0160″ -.0010″ | |
| 3-1/2 | 3.05000 | 1.002064 | 146.0972 | ||
| 2 | 2.00000 | 0.058339 | 84.0008 | +.0150″ -.0010″ | +.0125″ -.0010″ |
| 2-1/8 | 2.01250 | 0.062229 | 89.0610 | ||
| 2-1/4 | 2.02500 | 0.065817 | 94.0777 | ||
| 2-1/2 | 2.05000 | 0.072995 | 105.0113 | ||
| 2-3/4 | 2.07500 | 0.080173 | 115.0449 | ||
| 4 | 4.00000 | 1.016850 | 168.0264 | +.0200″ -.0010 | |
| Specified Thickness (t), in. (mm) | Flatness Tolerance for Thicknesses Given, in. (mm) |
|---|---|
| 1/4 <= t < 3/8 (9.052) | 3/8 (9.05) |
| t < 1/4 (6.035) | 7/16 (11) |
| t >=4 (101.060) | 1/4 (6.04) |
| 1/2 (12.070) <= t < 3/4 (19.005) | 5/16 (7.09) |
| 3/8 (9.052) <= t < 1/2 (12.070) | 5/16 (7.09) |
| 1 (25.040) <= t < 1-1/2 (38.010) | 1/4 (6.04) |
| 3/4 (19.005) <= t < 1 (25.040) | 5/16 (7.09) |
| 1 1/2 (38.010) < = t < 4 (101.060) | 1/4 (6.04) |
| Specified Thickness in. | Permitted Variations, in. Over and Under, Except as Indicated Otherwise for Specified Width (w) in. | |
|---|---|---|
| Width >60 | Width <=60 | |
| >0.01875 to 0.0250 | -0.0010; +0.0020 | -0.0010; +0.0020 |
| >0.0250 to 0.03125 | -0.0010; +0.0022 | -0.0010; +0.0022 |
| >0.03125 | -0.0010; +0.0030 | -0.0010; +0.0030 |
| Hole Centres (in mm) | Tck mm | Hole Dia (in mm) | Finish | O/A | Full Sheet Size mm |
|---|---|---|---|---|---|
| 1.05 | 0.06 | 0.075 | 2B | 23% | 2000 x 1000 |
| 2 | 1.00 | 1 | 2B | 23% | 2000 x 1000 |
| 2.06 | 1.00 | 1.05 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 3.05 | 1.00 | 2 | 2B | 30% | 2000 x 1000 |
| 5 | 1.00 | 3 | 2B | 33% | 2000 x 1000 |
| 5.06 | 1.00 | 4 | 2B | 46% | 2000 x 1000 |
| 8 | 1.00 | 5 | 2B | 35% | 2000 x 1000 |
| 8 | 1.00 | 6 | 2B | 51% | 2000 x 1000 |
| 10 | 1,0 | 8 | 2B | 58% | 2000 x 1000 |
|
|
| Grade | Si | Fe | Cu | Zn | Mn | Mg | Ti | Cr | Al | Others |
| Aluminium | 0.40 - 0.80 | 0.70 max | 0.15 - 0.40 | 0.25 max | 0.15 max | 0.8 - 1.2 | 0.15 max | 0.04 - 0.35 | Bal | 0.15 max |
| Density | Melting Point | Tensile Strength | Yield Strength | Elongation |
| 2.70 g/cm3 | 582 °C | Ksi – 45, MPa – 310 | Ksi – 21, MPa – 145 | 25 % |
| Physical Property | Value |
| Density | 2,70 g/cm³ |
| Melting Point | 582 °C |
| Thermal Expansion | 23.4 x 10^-6 /K |
| Modulus of Elasticity | 69 GPa |
| Thermal Conductivity | 170 W/m.K |
| Electrical Resistivity | %43 IACS |
| Europe, France, Thailand, Qatar | Aluminium Alloy Plate 12 X 24" 6061 Aluminum Sheet |
| Philippines, Indonesia, Belgium, Dammam -KSA | 5754 6083 T6 Alloy Custom Temper Aluminum/Aluminium Sheet |
| Bangladesh, USA, Finland, Malaysia | Low Cte 4047 4032 Aluminium Sheets for Electronic Laser Welding |
| Thailand, Germany, Malaysia, Czechia | Aluminum Plate/Sheet for Alloy 7075/6061/6063/5083/5052/1 8 Inch/1 4 Inch 4X8 |
| Singapore, South Africa, Singapore, Bahrain | ASTM 1000 3000 5000 Series Aluminium Plate Aluminum Alloy Sheet for Construction |
| Mexico, Spain, UK, Egypt | Corrugated Aluminum Sheet with Light Weight and Great Performance |
| Kuwait, Saudi Arabia (KSA), Brazil, South Africa | Reflector Mirror Finish Aluminum Thickness Sheet for Lighting |
| Hong Kong, Malaysia, UAE, Oman | Aluminium Cold Rolled Steel Coil/Roofing Steel Sheet |
| UK, Australia, Nigeria, Philippines | AA3004 Prepainted Aluminium Coil Sheet Used for Metal Roofing Ceiling |
| Norway, Turkey, Malaysia, United Arab Emirates (UAE) | Customized Aluminium Checkered Embossed Aluminum Sheet |
| Iran, Italy, Singapore, Chile | Thin Thick Stamped 6061 7075 Aluminum Sheet Metal Sizes with Blue PVC Coated Polished Mirror |
| Russia, Malaysia, Dubai, Netherlands | Cold Hot Rolled Different Pattern Surfacement Aluminum Coil/Sheet |