Alloy 20 Plate Suppliers

buy Cut to size ASTM B463 UNS N08020 Sheet stock directly from Manufacturer in india


There are a wide variety of austenitic stainless steel plates available in the market. If your application works in sulfuric acid then Carpenter 20 strip is the best available option for you. 20Cb-3® foil has outstanding resistance to corrosion. Moreover, Incoloy® alloy 20 Shim Sheet also displays resistance to crevice corrosion and pitting.

Crevice corrosion in chemicals containing chlorides, nitric, sulfuric, and phosphoric acid is also resisted by the UNS N08020 Chequered Plate. As these ASME SB463 DIN 2.4660 Coils contain niobium it provides stability and acts against intergranular corrosion. This was previously designed to be used in an environment exposed to sulfuric acid however, with time it has displayed its mechanical property and fabricability. This has promoted the use of Werkstoff No 2.4660 Perforated Sheet in the food, pharmaceutical, and plastic industry. Application of these sheets saves a lot of costs when compared to higher-cost alloys to figure out the resistance offered in different environments.

20 Alloy Cold Rolled Sheet produces minimal precipitation of carbide during welding and falls between stainless steel and nickel category. This is because it displays the properties of both. These Incoloy® alloy 20 Hot Rolled Plate are used in a corrosive atmosphere which is deprived of post welding heat conduct due to the limited carbon and stabilizer used in it.

We are amongst the leading manufacturers and alloy 20 plate suppliers in India. We use the best quality raw material and do not compromise on the quality of the final product. We produce ASTM B463 UNS N08020 Sheet in different sizes, shapes, and dimensions as per customers' specifications. Customer satisfaction is our top priority.

 

Alloy 20 Plate
Alloy 20 Plate
Nickel Alloy 20 Sheet
Nickel Alloy 20 Sheet
SS Alloy 20 Strip
SS Alloy 20 Strip

 

supplier of high quality No. 1 Finish Carpenter 20 strip and Coil in Mumbai, check alloy 20 plate price

 

Specification Chart of Alloy 20 Plate / Sheet

Specification ASTM B463 / ASME SB463
standards and approvals
  • EN ISO 18286
  • EN 10051
  • EN 10088-1
  • ISO 15510
  • EN ISO 9445
  • ASTM A 480
  • ASTM A 959
  • ASME IID
Standard Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

  • Cold rolled - 0.5-6.4 mm
  • Hot rolled - 3.0–10.0 mm
Thickness 0.1 to 100 mm Thk
Width 10-2500mm
Length 2m, 2.44m, 3m, or as required
Finish 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard
Stock available in form of Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
Profiling

To provide a full profiling service in India we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Manufacturers Shah Alloys, Jindal, Sail, Outokumpu, TISCO, BAOSTEEL, LISCO, JISCO, ZPSS, POSCO
Plasma profiles As per customer's drawings
Value added services Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing.

Frequently Used Nickel Alloy 20 Sheet Types

Alloy 20 Sheet

Alloy 20 Sheet

SB 463 Alloy 20 Plate

SB 463 Alloy 20 Plate

Alloy 20 UNS N08020 Coil

Alloy 20 UNS N08020 Coil

ASTM B463 Alloy 20 Foil

ASTM B463 Alloy 20 Foil

Alloy 20 Strip

Alloy 20 Strip

SB 463 Alloy 20 Shim Sheet

SB 463 Alloy 20 Shim Sheet

Alloy 20 UNS N08020 Strip Tape

Alloy 20 UNS N08020 Strip Tape

ASTM B463 Alloy 20 Chequered Plate

ASTM B463 Alloy 20 Chequered Plate

 

Call for small piece of ASME SB463 DIN 2.4660 Shim Sheet to test before buying, view specification

 

Check Price List SB 463 Alloy 20 Plate

Price list of Alloy 20 Plate in India ASTM B463 Alloy 20 Plate Price in India (INR) SB 463 Alloy 20 Plate Price in UK Pound sterling Alloy 20 UNS N08020 Plate Price in UAE Dirham
ASTM B 463 GR UNS NO-8020 ALLOY 20 PLATE NACE MR-0175,SIZE 2000 X 4000 X 5MM THK INR 921,134/Pcs 9958.38 UK Pound sterling/Pcs 47569.30 UAE Dirham/Pcs

Chemical Equation of Alloy 20 Strip

Grade C Mn Si S Cu Ni Cr Fe Mo P
Alloy 20 0.07 max 2.00 max 1.00 max 0.035 max 3.0-4.0 32.0-38.0 19.0-21.0 29.85 min* 2.0-3.0 0.045 max

 

View latest price & ready sizes of 20Cb-3® Perforated Sheet and Chequered Plate Ex Mumbai

 

Mechanical Behaviour of Alloy 20 UNS N08020 Coil

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi -80,000, MPa -551 Psi – 35,000, MPa – 241 30%

Equivalent of Alloy 20 Strip

STANDARD WERKSTOFF NR. UNS AFNOR EN
Alloy 20 2.4660 N08020 Z2NCUD31-20AZ NiCr20CuMo

ASTM B463 Alloy 20 Plate Density

density
lb/in3 : 0.292 , g/cm3 : 8.08

 

buy Incoloy® alloy 20 Hot Rolled Plate and Cold Rolled Sheet at low price, view weight calculator

 

Alloy 20 Plate Melting Range

Melting range
1443 °C (2430 °F)

Alloy 20 UNS N08020 Plate Stock List

Alloy 20 Chequered Plate Alloy 20 UNS N08020 Quarto Plate
SB 463 Alloy 20 Plate ASTM B463 Alloy 20 Rolling Plate
Alloy 20 UNS N08020 Hot Rolled Plate Alloy 20 N08020 Perforated Plate
ASTM B463 Alloy 20 Cold Rolled Plate Nickel Alloy 20 Bbq Plate
Alloy 20 N08020 Plate 2b Finish Alloy 20 UNS 8020 Diamond Plate
Nickel Alloy 20 Plate Mill Finish UNS N08020 Alloy 20 Thin Plate
Alloy 20 UNS 8020 Clad Plate Alloy 20 Cb Tisco Plate
UNS N08020 Alloy 20 Chequer Plate Carpenter Alloy 20cb3 Tread Plate
Alloy 20 Cb Checker Plate Alloy 20 Steel Polished Plate
Carpenter Alloy 20cb3 Plate Mirror Finish Carpenter 20 Alloy Chequered Plate
Alloy 20 Steel Plate Brushed Finish Alloy 20 Nickel Hot Rolled Sheet
Carpenter 20 Alloy 10mm Plate Cn7m Alloy 20 Cold Rolled Sheet
Alloy 20 Nickel 1/4 Inch Plate Alloy 20 Inconel Perforated Sheet
Cn7m Alloy 20 Custom Cut Plate Stainless Steel Alloy 20 Sheet
Alloy 20 Inconel Checkered Plate Alloy 20 Laser Cut Plate
Stainless Steel Alloy 20 Embossed Plate SB 463 Alloy 20 Plasma Cutting Plate

Dimension Table of Alloy 20 Plate

Metric Dimensions

Surface finish

Thickness (mm)

Width (mm)

2B – Cold rolled, heat treated, pickled, skin passed

0.25–8.0

max. 2032

2D – Cold rolled, heat treated, pickled

0.4–6.35

max. 1524

2E – Cold rolled, heat treated, mechanically descaled

0.4–8.0

max. 2032

2R – Cold rolled, bright annealed

0.25–3.5

max. 1524

2H – Work hardened

0.4–6.35

max. 1524

Polished, brushed

0.5–4.0

max. 1524

Imperial Dimensions

Surface finish

Gauge (in)

Width (in)

2B – Cold rolled, heat treated, pickled, skin passed

10–24

max. 72*

2D – Cold rolled, heat treated, pickled

12–24

max. 60

BA Mexinox only

18–28

max. 48

Polished (not brushed)

11–24

max. 60

Temper rolled Mexinox only

13–29

max. 48